AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

235-2024 PUMP GP-UNIT INJECTOR HYD S/N 5XD4051-UP PART OF 126-7292 PUMP & MTG GP-UNIT INJ HYD D8L TRACK-TYPE TRACTOR


FUEL SYSTEM
PUMP GP-FUEL INJECTION
FILTER GP-FUEL
PUMP GP-UNIT INJECTOR HYD
LINES GP-FUEL
VALVE GP-SOLENOID
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING

TRACK-TYPE TRACTOR D8L TRACK-TYPE TRACTOR 53Y
 3408E Engine Emissions Retrofit Repower Tier II For D8L Tractor 53Y00001-UP (MACHINE) SEBP5317 D8L 53Y   (1981)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
DRIVE GP-UNIT INJ HYD PUMP
125-3428 DRIVE GP-UNIT INJ HYD PUMP
DRIVE GP-UNIT INJ HYD PUMP
180-6649 DRIVE GP-UNIT INJ HYD PUMP
INJECTOR GP-FUEL
232-1173 INJECTOR GP-FUEL
PUMP & MTG GP-UNIT INJ HYD
126-7292 PUMP & MTG GP-UNIT INJ HYD
PUMP GP-FUEL INJECTION
209-2785 PUMP GP-FUEL INJECTION
PUMP GP-UNIT INJECTOR HYD
235-2024 PUMP GP-UNIT INJECTOR HYD
PUMP GP-UNIT INJECTOR HYD
235-2026 PUMP GP-UNIT INJECTOR HYD
WIRING GP-UNIT INJECTOR
109-0401 WIRING GP-UNIT INJECTOR
 

#SEBP53170090
 

235-2024: PUMP GP-UNIT INJECTOR HYD

235-2024 PUMP GP-UNIT INJECTOR HYD
S/N 5XD4051-UP
PART OF 126-7292 PUMP & MTG GP-UNIT INJ HYD
i02088712 SEBP5317
2352024 PUMP GP-UNIT INJECTOR HYD Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 117-1620 [1] COUPLING  
2. 149-1950 [1] PUMP GP-FUEL TRANSFER  
3. 235-2026 Y [1] PUMP GP-UNIT INJECTOR HYD  
4. 0S-1617 [4] BOLT (5/16-18X0.75-IN)  
5. 6V-8676 [1] SEAL-O-RING  
6. 262-9769 [2] PLUG  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP53170091
 

235-2026: PUMP GP-UNIT INJECTOR HYD

235-2026 PUMP GP-UNIT INJECTOR HYD
S/N 5XD4051-UP
PART OF 235-2024 PUMP GP-UNIT INJECTOR HYD
i02765963 SEBP5317
2352026 PUMP GP-UNIT INJECTOR HYD Parts scheme 2352026 PUMP GP-UNIT INJECTOR HYD Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-5748 M [1] BOLT (M8X1.25X55-MM)  
2. 8S-8158 [1] SEAL-WIRE  
3. 133-1705 L [1] GASKET-HOUSING  
4. W [1] SHAFT  
5. 161-2307 [1] SEAT-SPRING  
6. 161-2308 [1] SPRING-YOKE  
7. 161-2309 Y [1] VALVE GP-FUEL (PRESSURE COMPENSATOR)  
8. 161-2312 W [1] YOKE AS  
9. W [1] BEARING  
10. [4] BOLT-SOCKET HEAD (10-24X3.25-IN)  
11. 165-1536 Y [1] VALVE GP-PRESSURE CONTROL (FUEL PUMP)  
13. [2] COVER-PINTLE  
14. 190-0016 Y [1] VALVE GP-FUEL (PRESSURE COMPENSATOR)  
15. 201-4155 [1] SEAL-LIP TYPE  
16. 212-5800 W [1] ROTATING GP-PUMP  
17. 239-2316 [8] BOLT AS  
    (EACH INCLUDES)
  9X-8256 [1] WASHER (6.6X12X2-MM THK)  
18. 254-7220 [1] HOUSING GP-PUMP (HYDRAULIC)  
  233-8136 [2] VALVE-CHECK  
19. 033-6039 L [2] SEAL-O-RING  
20. 033-6042 L [3] SEAL-O-RING  
21. 135-2652 L [1] SEAL-O-RING  
22. 135-2655 L [2] SEAL-O-RING  
23. 168-7999 [2] PIN-SPRING  
24. 6J-7855 [1] RING-RETAINING  
25. 6T-2130 [1] RING-RETAINING  
26. 6V-5218 M [10] BOLT (M8X1.25X35-MM)  
27. 9S-8004 [3] PLUG (9/16-18-THD)  
28. 9X-7680 L [5] SEAL-O-RING  
29. 8C-4983 E LOCKWIRE (28-CM)  
30. BJN [1] PLUG-COMPENSATOR  
31. BJN [1] PLUG-COMPENSATOR  
32. BJN [1] PLUG-COMPENSATOR  
33. BJN [1] PLUG-COMPENSATOR  
34. BJ [1] PLUG-COMPENSATOR  
35. BJ [1] PLUG-COMPENSATOR  
36. BJ [1] PLUG-COMPENSATOR  
37. BJ [1] PLUG-COMPENSATOR  
38. BJ [1] PLUG-COMPENSATOR  
39. BJ [1] PLUG-COMPENSATOR  
40. BJ [1] PLUG-COMPENSATOR  
   
    AVAILABLE REPAIR KIT(S):
  138-6256 LWY [1] KIT-SEAL (UNIT INJECTOR HYDRAULIC PUMP)  
    (INCLUDES SEAL-O-RINGS)
  161-8627 J [1] KIT-PLUG  
    (INCLUDES SEAL-O-RINGS & PLUG-COMPENSATOR)
  166-5985 NY [1] KIT-COMPENSATOR (UNIT INJECTOR HYDRAULIC PUMP)  
    (INCLUDES PLUG-COMPENSATOR, SEAL-O-RING, & CAT FORMS)
  154-6735 [1] KIT-BEARING  
    (INCLUDES 2 YOKE BEARINGS)
  225-8545 W KIT-PUMP  
    (INCLUDES 138-6256 SEAL KIT & PISTON)
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  J   PARTS MARKED J SERVICED BY KIT MARKED J
  L   PARTS MARKED L SERVICED BY KIT MARKED L
  M   METRIC PART
  N   PARTS MARKED N SERVICED BY KIT MARKED N
  W   PARTS MARKED W SERVICED MY KIT MARKED W
  Y   SEPARATE ILLUSTRATION
 

#SEBP53170092
 

102-7535: VALVE GP-CHECK

102-7535 VALVE GP-CHECK
S/N 5XD4051-4673
PART OF 163-5806 LINES GP-FUEL FILTER
i00089831 SEBP5317
1027535 VALVE GP-CHECK Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 033-6033 [1] SEAL-O-RING  
2. 6V-6923 [1] RING-BACKUP  
3. 6V-4589 [1] SEAL-O-RING  
 

#SEBP53170093
 

282-1915: VALVE GP-CHECK

282-1915 VALVE GP-CHECK
S/N 5XD4674-UP
PART OF 163-5806 LINES GP-FUEL FILTER
i02527207 SEBP5317
2821915 VALVE GP-CHECK Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 033-6033 [1] SEAL-O-RING  
2. 6V-6923 [1] RING-BACKUP  
3. 6V-4589 [1] SEAL-O-RING  
 

#SEBP53170094
 

161-2309: VALVE GP-FUEL

161-2309 VALVE GP-FUEL
S/N 5XD4420-UP
PART OF 235-2026 PUMP GP-UNIT INJECTOR HYD
i02763979 SEBP5317
1612309 VALVE GP-FUEL Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [2] PLUG  
2. 033-6043 [1] SEAL-O-RING  
3. 109-3206 [1] SEAL-O-RING  
4. 109-9685 [2] SEAL-O-RING  
5. 165-0536 [1] VALVE AS-CHECK (FUEL)  
  3E-4354 [1] BALL  
6. 174-8943 [1] SLEEVE  
7. 9T-3813 [1] PLUG  
8. 9T-3816 [1] SPOOL  
 

#SEBP53170095
 

190-0016: VALVE GP-FUEL

190-0016 VALVE GP-FUEL
S/N 5XD4420-UP
PART OF 235-2026 PUMP GP-UNIT INJECTOR HYD
i02769395 SEBP5317
1900016 VALVE GP-FUEL Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-0677 Y [1] VALVE GP-SOLENOID (PRESSURE CONTROL)  
2. 033-5853 [3] SEAL-O-RING  
3. 9S-8002 [3] PLUG (7/16-20-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP53170096
 

165-1536: VALVE GP-PRESSURE CONTROL

165-1536 VALVE GP-PRESSURE CONTROL
S/N 5XD4420-UP
BLOCK
PART OF 235-2026 PUMP GP-UNIT INJECTOR HYD
i02769411 SEBP5317
1651536 VALVE GP-PRESSURE CONTROL Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 138-4309 [2] FITTING  
2. 138-4311 [2] SPRING  
3. 138-4313 [2] VALVE (ORIFICE)  
4. 159-7521 [2] SEAT  
5. 161-2336 [1] BEARING-SELF-ALIGNING  
6. 161-6918 [1] RESTRICTOR  
7. 165-0536 [1] VALVE AS-CHECK (FUEL)  
  3E-4354 [1] BALL  
8. 168-0268 [2] SEAL-O-RING  
9. 033-6027 [2] SEAL-O-RING  
10. 033-6028 [1] SEAL-O-RING  
11. 108-5803 [1] SEAL-O-RING  
12. 109-9685 [2] SEAL-O-RING  
13. 9S-8001 [2] PLUG  
14. 9S-8007 [1] PLUG  
 

#SEBP53170097
 

107-0677: VALVE GP-SOLENOID

107-0677 VALVE GP-SOLENOID
S/N 5XD4420-UP
PART OF 190-0016 VALVE GP-FUEL
i00089843 SEBP5317
1070677 VALVE GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 033-6039 J [1] SEAL-O-RING  
2. 123-3132 J [1] RING-BACKUP  
3. 9X-5535 J [1] SPACER-SPECIAL  
4. 8C-6711 J [1] NUT-RETAINER (1/2-20-THD)  
5. 033-6028 J [1] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  9X-1484 J [1] KIT-SEAL (SOLENOID VALVE)  
  J   KIT MARKED J INCLUDES PART(S) MARKED J
 

#SEBP53170098
 

163-5820: ALTERNATOR GP-CHARGING

163-5820 ALTERNATOR GP-CHARGING
S/N 53Y1-UP
24 VOLTS, 75 AMPS
PART OF 478-9807 CONVERSION GP-ELECTRICAL
i01662921 SEBP5317
1635820 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4S-5780 [1] ROD  
2. 7C-3938 [1] PULLEY-ALTERNATOR (2-GROOVE)  
3. 8S-5383 [1] BLOCK  
4. 177-3908 [1] CABLE AS (BLACK)  
5. 188-2034 [1] PAN AS-DRIP  
  1F-0750 [1] NUT-WELD (3/8-16-THD)  
6. 199-6601 [1] V-BELT (ALTERNATOR AIR)  
7. 200-8281 CY [1] ALTERNATOR GP-CHARGING (24-VOLT, 75-AMPERE)  
8. 4L-6454 [2] BOLT (3/8-16X1-IN)  
9. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
10. 7X-0346 [1] BOLT (5/8-11X2-IN)  
11. 7X-0448 [2] NUT (5/8-11-THD)  
12. 7X-0591 [2] WASHER-HARD (17X29X3-MM THK)  
13. 8T-4122 [1] WASHER-HARD (17X32X3.5-MM THK)  
14. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 8T-4835 [1] BOLT (1/2-13X2-IN)  
16. 8T-8919 [2] BOLT (1/2-13X1.75-IN)  
17. 9H-1024 [1] WASHER-HARD (17X30X6-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP53170099
 

177-9953: ALTERNATOR GP-CHARGING

177-9953 ALTERNATOR GP-CHARGING
S/N 53Y1-UP
24-VOLT, 80-AMPERE
PART OF 455-1885 KIT-ENGINE CONVERSION
i01531014 SEBP5317
1779953 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 185-2653 [1] FRAME  
2. 5S-7349 [1] BOLT (1/4-20X0.5-IN)  
3. 185-2639 [1] FAN AS (ALTERNATOR)  
4. 1H-3244 [1] LOCKWASHER  
5. 185-2645 [1] FRAME  
6. 2K-4821 [1] LOCKNUT (5/8-18-THD)  
7. 5P-8247 [1] WASHER-HARD (17X32X3.5-MM THK)  
8. 228-9657 [1] COVER AS  
9. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
10. 185-2647 [1] GROMMET  
11. 9L-6770 [1] CAP-DUST  
12. 423-2775 [1] STATOR AS (24-VOLT, 95-AMPERE)(ALTERNATOR)  
13. 185-2638 [2] COLLAR  
14. 185-2654 [1] PLATE  
15. 185-2650 [1] ROTOR AS (ALTERNATOR)  
16. 185-2644 [1] COIL AS  
17. 185-2648 [1] REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR)  
18. 6V-8189 J [1] NUT (5/16-18-THD)  
19. 8T-4224 J [1] WASHER-HARD (8.8X16X2-MM THK)  
20. 3F-9556 J [1] LOCKWASHER  
   
    AVAILABLE REPAIR KIT(S):
  199-7891 J [1] KIT-TERMINAL (ALTERNATOR AIR)  
    (INCLUDES INSULATORS, WASHERS, NUT & STEP NUT)
  185-2655 [1] KIT-BEARING (ALTERNATOR)  
    (INCLUDES 3 BEARINGS)
  199-8436 [1] KIT-TERMINAL (ALTERNATOR AIR)  
    (INCLUDES HOLDER AS, PLATE, INSULATOR, PIN, BOLT, GROMMET & NUT)
  185-2658 [1] KIT-HARDWARE (ALTERNATOR AIR)  
    (INCLUDES BOLTS)
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles{1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Fuel System Identification
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Nozzle And Adapter Assembly
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Nozzle And Adapter
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Governor
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Pump Housing
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Governor Drive And Oil Pump
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Governor And Fuel Pump Drive (Fixed Timing Unit)
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Governor And Fuel Pump Drive (Automatic Timing Advance Unit)
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Transfer Pump Drive
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Transfer Pump
3408 ENGINE FOR CATERPILLAR BUILT MACHINES
Injection Actuation Pressure Control Valve
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Wiring
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector
3408E and 3412E Engines for Caterpillar Built Machines
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Fuel Injector Oil Leakage - Check
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Fuel Injection Nozzles
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Fuel Injection Pumps
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Automatic Timing Advance
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Fuel Injection Pump Housing And Governor
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Fuel Injection Pump Housing
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Governor
3408 VEHICULAR ENGINE FOR D8L TRACTOR
Injection Actuation Pressure Sensor - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Unit Injector - Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
Identification Of Fuel Injection Lines And Nozzle Bodies For Different Combustion Systems{1252,1254}
1980/02/25
Modification Of 5P1768 Pointer Assembly Necessary For Use On Some Fuel Injection Pump Housings{1253,0653}
1980/03/31
Special Cup Plugs For Use In Oversize (Larger Than Standard Size) Bores In Valve Rocker Arm Shafts{1102}
1980/09/15
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Larger Plug Used In The Ends Of The Rocker Arm Shaft Assembly{1102}
1980/12/01
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09
New Fuel Nozzle Adapter Assembly Used{1106}
1982/02/15
New Idler Shaft Used In Fuel Transfer Pumps{1256}
1982/02/22
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter{1106}
1982/10/18
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
New Fuel Nozzle Adapters Used{1106}
1983/05/09
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Procedure To Remove Sharp Edges From Fuel Racks {1257,1253}
1984/02/06
New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position{1106,1252}
1984/02/27
New Seal For Fuel Injection Pump Housing Is More Resistant To Heat Damage{1253}
1984/05/14
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
New Cylinder Heads And Fuel Nozzle Adapters Used{1101,1106}
1985/07/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Steel Fuel Pump Lifter Used{1250,1251}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
New Retainer And Improved Housing Keep Water Pump Bearing Tight; Repair For Loosened Bearing{1361}
1977/04/11
New 5P4185 Fuel Pump Timing Pin To Be Used Only On 3408 And 3412 Engines{0650,1257}
1977/05/16
Fuel Transfer Pump Shaft With Chromium Plate{1256}
1977/10/10
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Fabricated Tools Make It Easier To Remove And Install Fuel Pump And Governor In Chassis{0706,1286}
1987/03/16
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
A Gasket Group Is Available To Give Improved Sealing For The Oil Supply To The Rocker Arms On Early Engines{1101,1102,1221}
1978/04/03
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Different O-Ring Seals Now Used In Fuel Injection Pump Group{1251}
1978/08/28
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Ether Starting Aid Groups Are Now Available{1456}
1979/01/22
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups{1251,1253}
1991/05/20
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups {1252}
1993/05/17
New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups {1252}
1993/11/15
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Improved Fuel Pump Bonnet Seal Has Better Heat Resistance {1251}
1994/09/12
Procedure To Increase Fuel Transfer Pump Pressure {1256}
1995/04/10
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}
1996/03/25
New Design of the Injector Provides Improved Durability {1290, 1714}
2003/12/29
Troubleshooting Engines with New Scroll Fuel Systems (NSFS) {1254}
2006/01/02
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
The Edge Filter Is Now Removed from Fuel Nozzles {1254, 1290}
2009/04/20
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Improved Manufacturing Processes Are Used for Remanufactured Fuel Injector Nozzles That Are Used in Certain Machine Engines {1251, 1290}
2012/07/09
Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain Machines {1250, 1251, 1290, 1713}
2013/10/17

Caterpillar Parts SIS Catalog D8L :

PUMP GP-FUEL INJECTION
209-2785 PUMP GP-FUEL INJECTION
PUMP & MTG GP-UNIT INJ HYD
126-7292 PUMP & MTG GP-UNIT INJ HYD
LINES GP-INJECTOR HYD PUMP
163-8406 LINES GP-INJECTOR HYD PUMP
LINES GP-FUEL FILTER
163-5806 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
163-5806 LINES GP-FUEL FILTER
KIT-SEAL
138-6256 KIT-SEAL
166-5985 KIT-COMPENSATOR
INJECTOR GP-FUEL
232-1173 INJECTOR GP-FUEL
PUMP GP-UNIT INJECTOR HYD
235-2026 PUMP GP-UNIT INJECTOR HYD
VALVE GP-CHECK
102-7535 VALVE GP-CHECK
VALVE GP-CHECK
282-1915 VALVE GP-CHECK
VALVE GP-FUEL
161-2309 VALVE GP-FUEL
VALVE GP-FUEL
190-0016 VALVE GP-FUEL
VALVE GP-PRESSURE CONTROL
165-1536 VALVE GP-PRESSURE CONTROL
VALVE GP-SOLENOID
107-0677 VALVE GP-SOLENOID
ALTERNATOR GP-CHARGING
163-5820 ALTERNATOR GP-CHARGING

Truck sale:

Caterpillar D8L, Construction
250,617 USD 
Caterpillar D8L, Construction
- Dozers
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand
Caterpillar D8L, Construction
 
Caterpillar D8L, Construction
- Dozers
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand
Caterpillar D8L, Construction
75,000 
Caterpillar D8L, Construction
- Dozers
NMC
CATERPILLAR D8L 1984
 
CATERPILLAR D8L 1984
- TRACK TYPE TRACTORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
1985 CAT D8L
USD $57,950 
1985 CAT D8L

Global Heavy Resources Inc.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.