AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

C7 Engine Emissions Retrofit Repower Tier III For 140G Motor Grader 72V00001-UP (MACHINE) ELECTRICAL AND STARTING SYSTEM Caterpillar SIS



MOTOR GRADER 140G MOTOR GRADER 72V
 C7 Engine Emissions Retrofit Repower Tier III For 140G Motor Grader 72V00001-UP (MACHINE) SEBP5319 140G 72V   (1974)

Parts group 140G:

  For full view, you need register
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING
PULLEY-ALTERNATOR
129-5096 PULLEY-ALTERNATOR
129-5096 PULLEY-ALTERNATOR
S/N 72V1-UP
8-GROOVE, WITH KEYWAY
PART OF 459-6790 KIT-ENGINE CONVERSION
ALTERNATOR GP-CHARGING
177-9953 ALTERNATOR GP-CHARGING
177-9953 ALTERNATOR GP-CHARGING
S/N 72V1-UP
24-VOLT, 80-AMPERE
PART OF 246-6701 ALTERNATOR GP-CHARGING, 459-6790 KIT-ENGINE CONVERSION
ALTERNATOR GP-CHARGING
246-6701 ALTERNATOR GP-CHARGING
246-6701 ALTERNATOR GP-CHARGING -WITHOUT AIR CONDITIONER
S/N 72V1-UP
80 AMPERE
PART OF 342-8644 INSTALLATION GP-ENGINE
ELECTRONICS GP-ENGINE
CONTROL & MTG GP-ENGINE ELEK
246-9345 CONTROL & MTG GP-ENGINE ELEK
246-9345 CONTROL & MTG GP-ENGINE ELEK
S/N TX71-UP; KHX16810-UP
CONTROL GP-ENGINE ELECTRONIC
226-7473 CONTROL GP-ENGINE ELECTRONIC
226-7473 CONTROL GP-ENGINE ELECTRONIC
S/N TX71-UP; KHX16810-UP
PART OF 246-9345 CONTROL & MTG GP-ENGINE ELEK
CONTROL GP-UNPROGRAMMED
CONTROL GP-UNPRGMED MONITOR
239-5025 CONTROL GP-UNPRGMED MONITOR
239-5025 CONTROL GP-UNPRGMED MONITOR -MESSENGER
S/N 72V1-UP
INDUSTRIAL
PART OF 243-3820 MODULE GP-DISPLAY
CONVERSION GP
342-8650 CONVERSION GP-ELECTRICAL
342-8650 CONVERSION GP-ELECTRICAL
S/N 72V1-UP
PART OF 330-9479 CONVERSION AR-MACHINE
FOR USE WITH 140G RETROFIT REPOWER TIER III
ELECTRICAL GP
342-8650 CONVERSION GP-ELECTRICAL
342-8650 CONVERSION GP-ELECTRICAL
S/N 72V1-UP
PART OF 330-9479 CONVERSION AR-MACHINE
FOR USE WITH 140G RETROFIT REPOWER TIER III
SENSOR GP
SENSOR GP-ENGINE
297-5355 SENSOR GP-ENGINE
297-5355 SENSOR GP-ENGINE
S/N KHX16810-UP
SENSOR GP-ENGINE
297-5355 SENSOR GP-ENGINE
297-5355 SENSOR GP-ENGINE
S/N TX71-UP; KHX16810-UP
PART OF 455-4574 ENGINE AR-CORE
SENSOR GP-POSITION
266-1467 SENSOR GP-POSITION
266-1467 SENSOR GP-POSITION
S/N 72V1-UP
ROTARY
PART OF 209-3377 PEDAL GP-GOVERNOR
SENSOR GP-PRESSURE
194-6725 SENSOR GP-PRESSURE
194-6725 SENSOR GP-PRESSURE
S/N TX71-UP; KHX16810-UP
PART OF 250-8313 FILTER GP-FUEL
SENSOR GP-PRESSURE
197-8393 SENSOR GP-PRESSURE
197-8393 SENSOR GP-PRESSURE
S/N TX71-UP; KHX16810-UP
PART OF 297-5355 SENSOR GP-ENGINE
SENSOR GP-PRESSURE
197-8394 SENSOR GP-PRESSURE
197-8394 SENSOR GP-PRESSURE
S/N KHX16810-UP
PART OF 297-5355 SENSOR GP-ENGINE
SENSOR GP-PRESSURE
210-1747 SENSOR GP-PRESSURE
210-1747 SENSOR GP-PRESSURE
S/N KHX16810-UP
PART OF 297-5355 SENSOR GP-ENGINE
SENSOR GP-PRESSURE
224-4536 SENSOR GP-PRESSURE
224-4536 SENSOR GP-PRESSURE
S/N TX71-UP; KHX16810-UP
PART OF 236-6220 SENSOR GP-PRESSURE
SENSOR GP-PRESSURE
236-6220 SENSOR GP-PRESSURE
236-6220 SENSOR GP-PRESSURE
S/N TX71-UP; KHX16810-UP
PART OF 297-5355 SENSOR GP-ENGINE
SENSOR GP-SPEED
236-6221 SENSOR GP-SPEED
236-6221 SENSOR GP-SPEED
S/N TX71-UP; KHX16810-UP
PART OF 297-5355 SENSOR GP-ENGINE
SENSOR GP-TEMPERATURE
234-5013 SENSOR GP-TEMPERATURE
234-5013 SENSOR GP-TEMPERATURE
S/N TX71-UP; KHX16810-UP
PART OF 250-8313 FILTER GP-FUEL
SENSOR GP-TEMPERATURE
274-7395 SENSOR GP-TEMPERATURE
274-7395 SENSOR GP-TEMPERATURE
S/N TX71-UP; KHX16810-UP
PART OF 297-5355 SENSOR GP-ENGINE
SENSOR GP-TEMPERATURE
274-7396 SENSOR GP-TEMPERATURE
274-7396 SENSOR GP-TEMPERATURE
S/N TX71-UP; KHX16810-UP
PART OF 297-5355 SENSOR GP-ENGINE
STARTING AID GP
STARTING AID GP-ETHER
255-5440 STARTING AID GP-ETHER
255-5440 STARTING AID GP-ETHER
S/N 72V1-UP
PART OF 342-8655 CONVERSION AR-MACHINE
VALVE GP-ETHER STARTING
239-1134 VALVE GP-ETHER STARTING
239-1134 VALVE GP-ETHER STARTING
S/N 72V1-UP
24-VOLT, CONTINUOUS
PART OF 255-5440 STARTING AID GP-ETHER
STARTING MOTOR GP
STARTING MOTOR GP-ELECTRIC
111-4275 STARTING MOTOR GP-ELECTRIC
111-4275 STARTING MOTOR GP-ELECTRIC
S/N 72V1-UP
24-VOLT
PART OF 342-8650 CONVERSION GP-ELECTRICAL
STARTING MOTOR GP-ELECTRIC
207-1517 STARTING MOTOR GP-ELECTRIC
207-1517 STARTING MOTOR GP-ELECTRIC
S/N 72V1-UP
24-VOLT
PART OF 459-6790 KIT-ENGINE CONVERSION, 111-4275 STARTING MOTOR GP-ELECTRIC
SWITCH GP
SWITCH GP-MAGNETIC
125-1302 SWITCH GP-MAGNETIC
125-1302 SWITCH GP-MAGNETIC
S/N 72V1-UP
24-VOLT
PART OF 342-8650 CONVERSION GP-ELECTRICAL, 459-6790 KIT-ENGINE CONVERSION
SWITCH GP-MAGNETIC
398-0940 SWITCH GP-MAGNETIC
398-0940 SWITCH GP-MAGNETIC
S/N TX71-UP; KHX16810-UP
PART OF 275-0596 WIRING GP-HEATER
SWITCH GP-PRESSURE
275-1253 SWITCH GP-PRESSURE
275-1253 SWITCH GP-PRESSURE
S/N TX71-UP; KHX16810-UP
5 TO 28-VOLT. AMPSEAL CONNECTOR
PART OF 250-8313 FILTER GP-FUEL
SWITCH GP-TOGGLE
139-2116 SWITCH GP-TOGGLE
139-2116 SWITCH GP-TOGGLE
S/N 72V1-UP
PART OF 342-8650 CONVERSION GP-ELECTRICAL
WIRING GP
SENSOR GP-ENGINE
297-5355 SENSOR GP-ENGINE
297-5355 SENSOR GP-ENGINE
S/N KHX16810-UP
SENSOR GP-ENGINE
297-5355 SENSOR GP-ENGINE
297-5355 SENSOR GP-ENGINE
S/N TX71-UP; KHX16810-UP
PART OF 455-4574 ENGINE AR-CORE
SENSOR GP-POSITION
266-1467 SENSOR GP-POSITION
266-1467 SENSOR GP-POSITION
S/N 72V1-UP
ROTARY
PART OF 209-3377 PEDAL GP-GOVERNOR
SENSOR GP-PRESSURE
194-6725 SENSOR GP-PRESSURE
194-6725 SENSOR GP-PRESSURE
S/N TX71-UP; KHX16810-UP
PART OF 250-8313 FILTER GP-FUEL
SENSOR GP-PRESSURE
197-8393 SENSOR GP-PRESSURE
197-8393 SENSOR GP-PRESSURE
S/N TX71-UP; KHX16810-UP
PART OF 297-5355 SENSOR GP-ENGINE
SENSOR GP-PRESSURE
197-8394 SENSOR GP-PRESSURE
197-8394 SENSOR GP-PRESSURE
S/N KHX16810-UP
PART OF 297-5355 SENSOR GP-ENGINE
SENSOR GP-PRESSURE
210-1747 SENSOR GP-PRESSURE
210-1747 SENSOR GP-PRESSURE
S/N KHX16810-UP
PART OF 297-5355 SENSOR GP-ENGINE
SENSOR GP-PRESSURE
224-4536 SENSOR GP-PRESSURE
224-4536 SENSOR GP-PRESSURE
S/N TX71-UP; KHX16810-UP
PART OF 236-6220 SENSOR GP-PRESSURE
SENSOR GP-PRESSURE
236-6220 SENSOR GP-PRESSURE
236-6220 SENSOR GP-PRESSURE
S/N TX71-UP; KHX16810-UP
PART OF 297-5355 SENSOR GP-ENGINE
SENSOR GP-SPEED
236-6221 SENSOR GP-SPEED
236-6221 SENSOR GP-SPEED
S/N TX71-UP; KHX16810-UP
PART OF 297-5355 SENSOR GP-ENGINE
SENSOR GP-TEMPERATURE
234-5013 SENSOR GP-TEMPERATURE
234-5013 SENSOR GP-TEMPERATURE
S/N TX71-UP; KHX16810-UP
PART OF 250-8313 FILTER GP-FUEL
SENSOR GP-TEMPERATURE
274-7395 SENSOR GP-TEMPERATURE
274-7395 SENSOR GP-TEMPERATURE
S/N TX71-UP; KHX16810-UP
PART OF 297-5355 SENSOR GP-ENGINE
SENSOR GP-TEMPERATURE
274-7396 SENSOR GP-TEMPERATURE
274-7396 SENSOR GP-TEMPERATURE
S/N TX71-UP; KHX16810-UP
PART OF 297-5355 SENSOR GP-ENGINE
SWITCH GP-PRESSURE
275-1253 SWITCH GP-PRESSURE
275-1253 SWITCH GP-PRESSURE
S/N TX71-UP; KHX16810-UP
5 TO 28-VOLT. AMPSEAL CONNECTOR
PART OF 250-8313 FILTER GP-FUEL
WIRING GP-ELECTRONIC CONTROL
399-2133 WIRING GP-ELECTRONIC CONTROL
399-2133 WIRING GP-ELECTRONIC CONTROL
S/N TX71-5745; KHX56813-UP
WIRING GP-ELECTRONIC CONTROL
399-2133 WIRING GP-ELECTRONIC CONTROL
399-2133 WIRING GP-ELECTRONIC CONTROL
S/N TX75746-UP
WIRING GP-ENGINE
198-2714 WIRING GP-ENGINE
198-2714 WIRING GP-ENGINE
S/N KHX16810-56812
WIRING GP-HEATER
275-0596 WIRING GP-HEATER
275-0596 WIRING GP-HEATER
S/N TX71-UP; KHX16810-UP
24-VOLT
ELECTRONICS GP-MONITOR
CONTROL GP-UNPRGMED MONITOR
239-5025 CONTROL GP-UNPRGMED MONITOR
239-5025 CONTROL GP-UNPRGMED MONITOR -MESSENGER
S/N 72V1-UP
INDUSTRIAL
PART OF 243-3820 MODULE GP-DISPLAY
HEATER GP
WIRING GP-HEATER
275-0596 WIRING GP-HEATER
275-0596 WIRING GP-HEATER
S/N TX71-UP; KHX16810-UP
24-VOLT
METER GP-SERVICE
366-4622 KIT-SERVICE METER
366-4622 KIT-SERVICE METER
S/N 72V1-UP
RELEASED TO PROVIDE A SERVICE KIT FOR DIGITAL HOURMETER WITH IMPROVED ELECTRICAL PROTECTION
PART OF 459-6790 KIT-ENGINE CONVERSION
HARNESS GP
198-2713 HARNESS AS-ENGINE
198-2713 HARNESS AS-ENGINE
S/N TX71-UP; KHX16810-UP
PART OF 399-2133 WIRING GP-ELECTRONIC CONTROL, 198-2714 WIRING GP-ENGINE
222-5917 HARNESS AS-ENGINE
222-5917 HARNESS AS-ENGINE
S/N TX71-5745; KHX56813-UP
PART OF 399-2133 WIRING GP-ELECTRONIC CONTROL
520-1511 HARNESS AS-ENGINE
520-1511 HARNESS AS-ENGINE
S/N TX75746-UP; KHX16810-56812
PART OF 399-2133 WIRING GP-ELECTRONIC CONTROL, 198-2714 WIRING GP-ENGINE

Information:

(For parts list, see above)

Special Instruction
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation Instructions for the Refill Desiccant Kit{4285}
Installation Instructions for the Refill Desiccant Kit{4285}
Installation Of 2G5090 And 2G5100 Backup Warning Groups{7406}
Installation Of 2G5090 And 2G5100 Backup Warning Groups{7406}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 262-6141 Alarm Gp {7406}
Installation of 262-6141 Alarm Gp {7406}
Service Letter-NACD
Neutral Start Switch And/Or Back-Up Alarm Switch May Stick On Certain 12G, 14G, 16G, 120G, 130G, 140G, And 160G Motor Graders
Neutral Start Switch And/Or Back-Up Alarm Switch May Stick On Certain 12G, 14G, 16G, 120G, 130G, 140G, And 160G Motor Graders
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Specifications
Backup Warning Switch
12G, 120G, 130G & 140G MOTOR GRADERS POWER TRAIN
Backup Warning Switch
12G, 120G, 130G & 140G MOTOR GRADERS POWER TRAIN
Service Letter-China
Neutral Start Switch And/Or Back-Up Alarm Switch May Stick On Certain 12G, 14G, 16G, 120G, 130G, 140G, And 160G Motor Graders
Neutral Start Switch And/Or Back-Up Alarm Switch May Stick On Certain 12G, 14G, 16G, 120G, 130G, 140G, And 160G Motor Graders
Service Letter-Asia
Service Letter-APD
Service Magazine
Coolant Flow Circuit Can Be Added To Electronic Monitoring System (EMS) {7490,1380,1375,1350,7400}
1981/10/26
Make Sure Back-Up Alarm Switch Is Correctly Installed{7406}
1985/05/20
A Radius On Two Slotted Holes Where 9X0023 Neutral Start/Backup Alarm Switch Moves Improves Switch Life And Operation{1424}
1992/11/16
The 3P-8993 Speaker Assembly Discontinued And Replaced By 123-6449 Back-Up Alarm {7406}
1997/12/22
Engine News
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Charging System Troubleshooting {1406}
Charging System Troubleshooting {1406}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Specifications
Alternator And Regulator
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Alternator
DELCO REMY 20-SI SERIES ALTERNATOR
Alternators
3306 VEHICULAR ENGINE
Alternator Regulator
3306 VEHICULAR ENGINE
Generators
3306 VEHICULAR ENGINE
Generator Regulators
3306 VEHICULAR ENGINE
Alternator
26SI Series Alternator
Alternator
N3 Series Brushless Alternators
Systems Operation
Systems Operation
DELCO REMY 20-SI SERIES ALTERNATOR
General Information
26SI Series Alternator
Component Description
26SI Series Alternator
Normal Operation
26SI Series Alternator
General Information
N3 Series Brushless Alternators
Component Description
N3 Series Brushless Alternators
Normal Operation
N3 Series Brushless Alternators
Testing and Adjusting
Testing And Adjusting
DELCO REMY 20-SI SERIES ALTERNATOR
T1 Alternator Output - Test
26SI Series Alternator
T2 Electrical System Current - Test
26SI Series Alternator
T3 Charging System - Test
26SI Series Alternator
T4 Alternator Drive System - Check
26SI Series Alternator
T5 Alternator Current - Test
26SI Series Alternator
T6 Residual Magnetism Restoration
26SI Series Alternator
T7 Identifying Source of Current Draw - Test
26SI Series Alternator
T8 Alternator Overcharging - Test
26SI Series Alternator
Initial Troubleshooting Procedure
26SI Series Alternator
General Information
26SI Series Alternator
Component - Test
26SI Series Alternator
Residual Magnetism - Restore
N3 Series Brushless Alternators
Field Winding - Test
N3 Series Brushless Alternators
Capacitor - Test
N3 Series Brushless Alternators
Rectifier - Test
N3 Series Brushless Alternators
Stator - Test
N3 Series Brushless Alternators
Regulator - Test
N3 Series Brushless Alternators
Troubleshooting
General Information
N3 Series Brushless Alternators
Charging System
N3 Series Brushless Alternators
MID 124 - CID 0168 - FMI 00
Machine Security System
MID 124 - CID 0168 - FMI 01
Machine Security System
MID 161 - CID 0168 - FMI 00
Product Link - PL522/523
MID 161 - CID 0168 - FMI 01
Product Link - PL522/523
MID 161 - CID 1251 - FMI 03
Product Link - PL522/523
MID 122 - CID 0168 - FMI 00
Product Link 121S/300
MID 122 - CID 0168 - FMI 01
Product Link 121S/300
MID 122 - CID 1251 - FMI 03
Product Link 121S/300
Charging System
Electronic Monitoring System
Disassembly and Assembly
Alternator
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Fan Drive And Support
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Alternator
DELCO REMY 20-SI SERIES ALTERNATOR
Alternator
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Fan Drive And Support
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Alternator - Assemble
26SI Series Alternator
Alternator - Disassemble
26SI Series Alternator
Alternator - Assemble
N3 Series Brushless Alternators
Alternator - Disassemble
N3 Series Brushless Alternators
Alternator - Remove and Install
C7
Engines for Caterpillar Built Machines
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
New Alternator And Fan Support Bracket{1356,1357,1405}
1982/02/08
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
New Front Housing Has Stronger Boss For Alternator{1151}
1977/10/10
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Alternator Terminal May Interfere With Fuel Tank Reinforcement Plate{1405}
1993/09/06
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Correction to Service Magazine, SEPD0544, "Repair Parts Available for Alternator R-Terminal" {1405}
2000/12/18
Correction to Service Magazine, SEPD0544, "Harness Repair of Alternator R-Terminal Connector" {1405}
2000/12/25
Information from SEHS7768 Can Now Be Found on Caterpillar SISWEB {1406}
2004/11/15
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Machine Applications {1000, 1052, 1053, 1210, 1251, 1252, 1254, 1265, 1290, 1405, 1713, 1901, 7490, 7610, 7620}
2015/07/21
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Truck Engine News
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2005/01/17
Engine News
Special Instruction
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Use Of 6V3025 Battery Cable Repair Kit{0613, 1400}
Use Of 6V3025 Battery Cable Repair Kit{0613, 1400}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Process for Communicating an Incident with a Battery{1401}
Process for Communicating an Incident with a Battery{1401}
Tool Operating Manual
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
Service Letter-China
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Troubleshooting
MID 124 - CID 0168 - FMI 00
Machine Security System
MID 124 - CID 0168 - FMI 01
Machine Security System
MID 161 - CID 0168 - FMI 00
Product Link - PL522/523
MID 161 - CID 0168 - FMI 01
Product Link - PL522/523
MID 161 - CID 1251 - FMI 03
Product Link - PL522/523
MID 122 - CID 0168 - FMI 00
Product Link 121S/300
MID 122 - CID 0168 - FMI 01
Product Link 121S/300
MID 122 - CID 1251 - FMI 03
Product Link 121S/300
Electrical Power Supply - Test
MSS3s Machine Security System
Charging System
Electronic Monitoring System
Disassembly and Assembly
Batteries
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Battery Box
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Batteries
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Service Magazine
Dirty Batteries Cause Light In LED's Of EMS Panel With Disconnect Switch Off{7490,1401}
1981/09/21
Maintenance Free Batteries{1401}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
New Glow Plug Wiring Harness Prevents Short Circuit{1403}
1978/08/07
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Shorter Mounting Bolts Used For Glow Plug Wiring{1403,1412}
1979/05/21
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
All Wheel Drive System Disabled For Shipping Purposes{7500}
1989/07/03
Correct Handling And Replacement of 3T6962 Pressure Switch Assembly{7332}
1990/12/10
New Hydraulic Oil Temperature Switch Harness Assembly Used {1408,1402,5731,5734,7413,7488,7490,7553,7556}
1991/07/22
Fitting Needed To Install New Oil Pressure Switch When Replacing Former Switches{7485}
1991/11/25
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
New Pressure Switch Assembly Is Available For Fuel Applications; 9G-8011 Pressure Switch Assembly Should Not Be Used In Fuel Applications {7414}
1996/02/12
Integral Connector Now Used On The Air Conditioning Condenser Fan Motor Relay Assembly{1408,7320}
1996/04/29
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2005/01/17
Information from SEHS7768 Can Now Be Found on Caterpillar SISWEB {1406}
2004/11/15
Special Instruction
Service Replacement Relays Available{4493}
Service Replacement Relays Available{4493}
Service Magazine
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
Special Instruction
Installation Of Attachment Ether Starting Aid Groups{1456}
Installation Of Attachment Ether Starting Aid Groups{1456}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Tool Operating Manual
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Service Magazine
Dirty Batteries Cause Light In LED's Of EMS Panel With Disconnect Switch Off{7490,1401}
1981/09/21
Coolant Flow Circuit Can Be Added To Electronic Monitoring System (EMS) {7490,1380,1375,1350,7400}
1981/10/26
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
New Radio Software Is Now Available For Product Link 522 and 523 Radio On All Cat <SUP>&reg;</SUP> Products {7610, 7620}
2014/02/06
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Machine Applications {1000, 1052, 1053, 1210, 1251, 1252, 1254, 1265, 1290, 1405, 1713, 1901, 7490, 7610, 7620}
2015/07/21
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
A New Handheld Digital Manometer is Now Available {7490}
A New Handheld Digital Manometer is Now Available {7490}
Truck Engine News
Do Not Use the 261-3363 Wireless Communication Adapter with Model Year 2007 Cat Engines and Transmissions in On-Highway Trucks {0785, 1930, 7620}
2007/10/01
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 1900, 1901}
2014/04/04
Engine News
277-4734 Bypass Harness Assembly Allows Cat Electronic Technician (Cat ET) to Communicate with ADEM IV:E2 Electronic Control Modules {0779, 0785, 1901, 1930}
2006/09/04
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 1900, 1901}
2014/03/28
A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
Instructions for Communicating With and Flashing the <NOBR>10R-4085</NOBR> Engine Electronic Control Gp and the <NOBR>10R-1824</NOBR> Engine Electronic Control Gp {1901, 1920}
Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Disassembly and Assembly
Speed/Timing Sensor - Remove and Install
C7
Engines for Caterpillar Built Machines
Electronic Control Module - Remove and Install
C7
Engines for Caterpillar Built Machines
Service Magazine
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
New Oil Control Piston Ring Used In 3300 Family Of Engines {1213,1214,1215}
1990/03/26
Download Flash Files By Using The Caterpillar Service Information System (SIS) Or SIS Web {1901, 7620}
2000/01/10
Subscriptions For Caterpillar Electronic Technician (ET) Software {7620}
2000/03/13
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
New Service Information Tool for CAT Dealers is Now Available {1900}
2002/06/17
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/04/08
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Machine Applications {1000, 1052, 1053, 1210, 1251, 1252, 1254, 1265, 1290, 1405, 1713, 1901, 7490, 7610, 7620}
2015/07/21
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Engine News
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
Special Instruction
Accessing Flash Software for Machines{7610, 7620}
Accessing Flash Software for Machines{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
277-2362 Transmission Analyzer III Group Offers Upgraded Diagnostic Capabilities {0769, 0779, 0783}
2007/10/22
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/04/08
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
Special Instruction
Accessing Flash Software for Machines{7610, 7620}
Accessing Flash Software for Machines{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/04/08
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
Engine News
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
Accessing Flash Software for Machines{7610, 7620}
Accessing Flash Software for Machines{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Installation of the Machine Security System (MSS) Universal Attachment Kit {7631, 7631}
Installation of the Machine Security System (MSS) Universal Attachment Kit {7631, 7631}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Installation Procedure for the Machine Security System (MSS3s) Universal Attachment Kit {1408, 1435, 7631}
Installation Procedure for the Machine Security System (MSS3s) Universal Attachment Kit {1408, 1435, 7631}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN ARTICULATED TRUCKS, MOTORGRADERS, OFF-HIGHWAY TRUCKS, AND WHEEL TRACTOR-SCRAPER
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN ARTICULATED TRUCKS, MOTORGRADERS, OFF-HIGHWAY TRUCKS, AND WHEEL TRACTOR-SCRAPER
PRODUCT SUPPORT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK PL241 MODULES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK PL241 MODULES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN ARTICULATED TRUCKS, MOTORGRADERS, OFF-HIGHWAY TRUCKS, AND WHEEL TRACTOR-SCRAPER
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN ARTICULATED TRUCKS, MOTORGRADERS, OFF-HIGHWAY TRUCKS, AND WHEEL TRACTOR-SCRAPER
PRODUCT SUPPORT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK PL241 MODULES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK PL241 MODULES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN ARTICULATED TRUCKS, MOTORGRADERS, OFF-HIGHWAY TRUCKS, AND WHEEL TRACTOR-SCRAPER
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN ARTICULATED TRUCKS, MOTORGRADERS, OFF-HIGHWAY TRUCKS, AND WHEEL TRACTOR-SCRAPER
PRODUCT SUPPORT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK PL241 MODULES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK PL241 MODULES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN ARTICULATED TRUCKS, MOTORGRADERS, OFF-HIGHWAY TRUCKS, AND WHEEL TRACTOR-SCRAPER
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN ARTICULATED TRUCKS, MOTORGRADERS, OFF-HIGHWAY TRUCKS, AND WHEEL TRACTOR-SCRAPER
PRODUCT SUPPORT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK PL241 MODULES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK PL241 MODULES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN ARTICULATED TRUCKS, MOTORGRADERS, OFF-HIGHWAY TRUCKS, AND WHEEL TRACTOR-SCRAPER
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN ARTICULATED TRUCKS, MOTORGRADERS, OFF-HIGHWAY TRUCKS, AND WHEEL TRACTOR-SCRAPER
PRODUCT SUPPORT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK PL241 MODULES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK PL241 MODULES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
Tool Operating Manual
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN ARTICULATED TRUCKS, MOTORGRADERS, OFF-HIGHWAY TRUCKS, AND WHEEL TRACTOR-SCRAPER
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN ARTICULATED TRUCKS, MOTORGRADERS, OFF-HIGHWAY TRUCKS, AND WHEEL TRACTOR-SCRAPER
PRODUCT SUPPORT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK PL241 MODULES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK PL241 MODULES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN ARTICULATED TRUCKS, MOTORGRADERS, OFF-HIGHWAY TRUCKS, AND WHEEL TRACTOR-SCRAPER
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN ARTICULATED TRUCKS, MOTORGRADERS, OFF-HIGHWAY TRUCKS, AND WHEEL TRACTOR-SCRAPER
PRODUCT SUPPORT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK PL241 MODULES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK PL241 MODULES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
Systems Operation
Operation of Status Indicator
Machine Security System
Protected Functions
Machine Security System
Diagnostic Operation
Machine Security System
Events
Machine Security System
Service Operation Using Machine Security System
Machine Security System
Key Information
Machine Security System
Service Operation Using Service Tool
Machine Security System
Electronic Control Module (ECM)
Machine Security System
System Overview
Machine Security System
Scheduled Access - "Security System Bypass Times"
Machine Security System
General Information
Machine Security System
Normal Operation
Machine Security System
System Components
Machine Security System
Cat Data Link
Machine Security System
General Information
MSS3s Machine Security System
System Overview
MSS3s Machine Security System
Normal Operation
MSS3s Machine Security System
Operation of Status Indicator
MSS3s Machine Security System
Key Information
MSS3s Machine Security System
Scheduled Access - "Security System Bypass Times"
MSS3s Machine Security System
Diagnostic Operation
MSS3s Machine Security System
Events
MSS3s Machine Security System
Protected Functions
MSS3s Machine Security System
Service Operation Using Machine Security System
MSS3s Machine Security System
Service Operation Using Service Tool
MSS3s Machine Security System
Electronic Control Module (ECM)
MSS3s Machine Security System
System Components
MSS3s Machine Security System
Data Links
MSS3s Machine Security System
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN ARTICULATED TRUCKS, MOTORGRADERS, OFF-HIGHWAY TRUCKS, AND WHEEL TRACTOR-SCRAPER
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN ARTICULATED TRUCKS, MOTORGRADERS, OFF-HIGHWAY TRUCKS, AND WHEEL TRACTOR-SCRAPER
PRODUCT SUPPORT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK PL241 MODULES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK PL241 MODULES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
Testing and Adjusting
Glossary of Terms
Machine Security System
Key - Program
Machine Security System
System Disarm - Program - Security System Bypass
Machine Security System
General Information
Machine Security System
Electronic Control Module (ECM) - Replace
Machine Security System
Software - Uninstall - "Immobilizer" Feature
Machine Security System
Time - Set
Machine Security System
Product Identification Number - Program
Machine Security System
Electronic Control Module (ECM) - Flash Program
Machine Security System
Factory Password - Obtain
Machine Security System
General Information
MSS3s Machine Security System
Product Identification Number - Program
MSS3s Machine Security System
Key - Program
MSS3s Machine Security System
System Disarm - Program - Security System Bypass
MSS3s Machine Security System
Factory Password - Obtain
MSS3s Machine Security System
Time - Set
MSS3s Machine Security System
Glossary of Terms
MSS3s Machine Security System
Software - Uninstall - "Immobilizer" Feature
MSS3s Machine Security System
Troubleshooting
Using Caterpillar Electronic Technician to Determine Diagnostic Codes
Machine Security System
Lost Key
Machine Security System
Diagnostic Code List
Machine Security System
General Information
Machine Security System
Engine Does Not Crank and Status Indicator Is Green
Machine Security System
Engine Does Not Start and Status Indicator Is Continuously Red
Machine Security System
MID 124 - CID 0248 - FMI 12
Machine Security System
MID 124 - CID 0817 - FMI 04
Machine Security System
MID 124 - CID 1391 - FMI 03
Machine Security System
MID 124 - CID 1391 - FMI 04
Machine Security System
MID 124 - CID 1392 - FMI 03
Machine Security System
MID 124 - CID 1392 - FMI 04
Machine Security System
Lost Key (MSS)
MSS3s Machine Security System
Engine Does Not Crank and Status Indicator Is Green
MSS3s Machine Security System
Engine Does Not Start and Status Indicator Is Continuously Red
MSS3s Machine Security System
ECM Output Driver - Test
MSS3s Machine Security System
ECM Software - Install
MSS3s Machine Security System
ECM - Replace
MSS3s Machine Security System
ECM - Configure
MSS3s Machine Security System
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
Parts Information for Locating Components of New Electronic Systems in SIS and Parts Manual {7602, 7631}
2001/04/09
New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
2011/10/20
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/04/08
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Machine Applications {1000, 1052, 1053, 1210, 1251, 1252, 1254, 1265, 1290, 1405, 1713, 1901, 7490, 7610, 7620}
2015/07/21
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK PL241 MODULES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE FIRMWARE ON THE PRODUCT LINK PL241 MODULES ON CERTAIN CATERPILLAR PRODUCTS, AND NON-CATERPILLAR PRODUCTS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Service Letter-APD
Testing and Adjusting
Electronic Control Module (ECM) - Replace
Machine Security System
Electronic Control Module (ECM) - Flash Program
Machine Security System
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Special Instruction
Installation Of 9G6981 And 7T8000 Voltage Converter Assemblies{1421}
Installation Of 9G6981 And 7T8000 Voltage Converter Assemblies{1421}
Service Magazine
Catalytic Converter And Exhaust Conditioning Products Available{1091}
1995/01/16
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Special Instruction
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Operation And Maintenance Of 1P3060 Pyrometer Group{0776}
Operation And Maintenance Of 1P3060 Pyrometer Group{0776}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Check For Plugged Orifices In Mechanical Pressure Gauges{7450}
1987/03/02
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Improved Start Switch Used{1416}
1987/05/25
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
Correct Mounting And Maintenance Of Amber Rotating Warning Lamp Group {1431,7530}
1990/10/22
Fitting Needed To Install New Oil Pressure Switch When Replacing Former Switches{7485}
1991/11/25
New PRELUB Systems Available For Medium To Large Caterpillar Construction Equipment {1319}
1992/04/06
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
Integral Connector Now Used On The Air Conditioning Condenser Fan Motor Relay Assembly{1408,7320}
1996/04/29
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Special Instruction
Accessing Flash Software for Machines{7610, 7620}
Accessing Flash Software for Machines{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Cat<SUP>&reg;</SUP> VIMS Converter Functionality {7610, 7620}
Cat® VIMS Converter Functionality {7610, 7620}
2 Wire and 4 Wire Ethernet Repair Procedure on All Cat<SUP>&reg;</SUP> Products {1408}
2 Wire and 4 Wire Ethernet Repair Procedure on All Cat® Products {1408}
Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}
Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}
Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}
Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}
Service Magazine
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/04/08
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24
Instructions for Preventing Utilization Messages Being Reported with Duplicate Time Stamps from PL321VSR Satellite Devices {7601}
2015/09/02
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
Event Identification Number (EID) Above 60000 is Now Used on All Cat<SUP>&reg;</SUP> Products {1400}
Event Identification Number (EID) Above 60000 is Now Used on All Cat® Products {1400}
Technical Information Bulletin
A Procedure Is Available to Adapt the Glow Plug Harness to Certain Engines{1403, 1412}
A Procedure Is Available to Adapt the Glow Plug Harness to Certain Engines{1403, 1412}
Specifications
Glow Plug Positioning<BR> (PC Engines)
3306 VEHICULAR ENGINE
Disassembly and Assembly
Glow Plugs (Earlier)
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Service Magazine
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
New Glow Plug Wiring Harness Prevents Short Circuit{1403}
1978/08/07
Shorter Mounting Bolts Used For Glow Plug Wiring{1403,1412}
1979/05/21
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Special Instruction
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Magazine
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Special Instruction
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Service Magazine
Improved End - of - Line - Test Fixture for the Product Link Antenna is Now Used {7606}
2006/11/13
Special Instruction
Current Draw Of Electric Starting Motors{1453}
Current Draw Of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Installation Of 6T8941 Rotating Warning Lamp Group{7328}
Installation Of 6T8941 Rotating Warning Lamp Group{7328}
Installation Guide for the 35-Watt High Intensity Discharge (HID) Light{1429}
Installation Guide for the 35-Watt High Intensity Discharge (HID) Light{1429}
Technical Information Bulletin
The 108-0358 Electronic Flasher Assembly Is Not A Drop-in Replacement For The 8D-6946 Flasher
The 108-0358 Electronic Flasher Assembly Is Not A Drop-in Replacement For The 8D-6946 Flasher
Service Magazine
Dirty Batteries Cause Light In LED's Of EMS Panel With Disconnect Switch Off{7490,1401}
1981/09/21
Caterpillar Electric Starting Motors{1453,1407}
1982/03/22
New Brackets Used In Front Floodlamp Lighting Group{7309}
1982/04/19
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Improved Rotating Warning Lamp Group Available{7328}
1985/03/25
New Electric Starting Motor Has Longer Brush Life{1453}
1977/11/14
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Correct Mounting And Maintenance Of Amber Rotating Warning Lamp Group {1431,7530}
1990/10/22
Correct Mounting Of 2M9346 Pressure Switch (Stop Lamp Switch) {1400}
1991/10/21
New Bracket Available For Use With 9X9556 Lamp Group (Beacon) {1431,1400}
1993/01/25
Heavy Duty Direction Signal Flasher Is Now Used {1430}
1994/01/24
Identification Plate For Starting/Charging Diagnostic Connector {1450,7557,7569}
1994/02/28
New Amber Rotating Beacon Increases Service Life{1431}
1994/05/23
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
New Rotating Beacons Available{1431}
1996/01/15
Integral Connector Now Used On The Air Conditioning Condenser Fan Motor Relay Assembly{1408,7320}
1996/04/29
A New Halogen Lamp Is Now Available for Certain Cat Products {1434}
2011/06/29
Special Instruction
Installation of 9X3289 Solenoid Assembly on Machines Equipped with Dual Horsepower Control{1000}
Installation of 9X3289 Solenoid Assembly on Machines Equipped with Dual Horsepower Control{1000}
Installation of Electrical Connectors at The Articulation Joint{1408}
Installation of Electrical Connectors at The Articulation Joint{1408}
Installation and Adjustment of 9X9524 Solenoid Assembly on Machines Equipped with Dual Horsepower Control{1000}
Installation and Adjustment of 9X9524 Solenoid Assembly on Machines Equipped with Dual Horsepower Control{1000}
Installation Of Attachment Ether Starting Aid Groups{1456}
Installation Of Attachment Ether Starting Aid Groups{1456}
Installation Of 6T8941 Rotating Warning Lamp Group{7328}
Installation Of 6T8941 Rotating Warning Lamp Group{7328}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Installation Of 3Y6693 Regulator Used With 3Y6880 Conversion Kit{1400}
Installation Of 3Y6693 Regulator Used With 3Y6880 Conversion Kit{1400}
Service Letter-NACD
Supplemental Steering Control Needs To Be Inspected On Certain 12G, 14G, 16G, 130G, And 140G Motor Graders; 772B Tractors; And 769C, 773B, 777, And 777B Trucks
Supplemental Steering Control Needs To Be Inspected On Certain 12G, 14G, 16G, 130G, And 140G Motor Graders; 772B Tractors; And 769C, 773B, 777, And 777B Trucks
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Supplemental Steering Control Needs To Be Inspected On Certain 12G, 14G, 16G, 130G, And 140G Motor Graders; 772B Tractors; And 769C, 773B, 777, And 777B Trucks
Supplemental Steering Control Needs To Be Inspected On Certain 12G, 14G, 16G, 130G, And 140G Motor Graders; 772B Tractors; And 769C, 773B, 777, And 777B Trucks
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-CFEL
Supplemental Steering Control Needs To Be Inspected On Certain 12G, 14G, 16G, 130G, And 140G Motor Graders; 772B Tractors; And 769C, 773B, 777, And 777B Trucks
Supplemental Steering Control Needs To Be Inspected On Certain 12G, 14G, 16G, 130G, And 140G Motor Graders; 772B Tractors; And 769C, 773B, 777, And 777B Trucks
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-CSARL
Supplemental Steering Control Needs To Be Inspected On Certain 12G, 14G, 16G, 130G, And 140G Motor Graders; 772B Tractors; And 769C, 773B, 777, And 777B Trucks
Supplemental Steering Control Needs To Be Inspected On Certain 12G, 14G, 16G, 130G, And 140G Motor Graders; 772B Tractors; And 769C, 773B, 777, And 777B Trucks
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Americas
Supplemental Steering Control Needs To Be Inspected On Certain 12G, 14G, 16G, 130G, And 140G Motor Graders; 772B Tractors; And 769C, 773B, 777, And 777B Trucks
Supplemental Steering Control Needs To Be Inspected On Certain 12G, 14G, 16G, 130G, And 140G Motor Graders; 772B Tractors; And 769C, 773B, 777, And 777B Trucks
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Pressure Switch (Low Air Warning)<BR> 9G8009
120G & 130G & 140G MOTOR GRADERS AIR SYSTEM & BRAKES
Stoplight Switch<BR> 2M9346
120G & 130G & 140G MOTOR GRADERS AIR SYSTEM & BRAKES
Alternator
DELCO REMY 20-SI SERIES ALTERNATOR
Service Letter-China
Supplemental Steering Control Needs To Be Inspected On Certain 12G, 14G, 16G, 130G, And 140G Motor Graders; 772B Tractors; And 769C, 773B, 777, And 777B Trucks
Supplemental Steering Control Needs To Be Inspected On Certain 12G, 14G, 16G, 130G, And 140G Motor Graders; 772B Tractors; And 769C, 773B, 777, And 777B Trucks
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Supplemental Steering Control Needs To Be Inspected On Certain 12G, 14G, 16G, 130G, And 140G Motor Graders; 772B Tractors; And 769C, 773B, 777, And 777B Trucks
Supplemental Steering Control Needs To Be Inspected On Certain 12G, 14G, 16G, 130G, And 140G Motor Graders; 772B Tractors; And 769C, 773B, 777, And 777B Trucks
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Systems Operation
Systems Operation
DELCO REMY 20-SI SERIES ALTERNATOR
Service Letter-APD
Supplemental Steering Control Needs To Be Inspected On Certain 12G, 14G, 16G, 130G, And 140G Motor Graders; 772B Tractors; And 769C, 773B, 777, And 777B Trucks
Supplemental Steering Control Needs To Be Inspected On Certain 12G, 14G, 16G, 130G, And 140G Motor Graders; 772B Tractors; And 769C, 773B, 777, And 777B Trucks
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Testing and Adjusting
Testing And Adjusting
DELCO REMY 20-SI SERIES ALTERNATOR
Disassembly and Assembly
Alternator
DELCO REMY 20-SI SERIES ALTERNATOR
Service Magazine
Use The 6V2056 Rod And 6V2057 Point To Find True Top Center{0653}
1980/07/14
Dirty Batteries Cause Light In LED's Of EMS Panel With Disconnect Switch Off{7490,1401}
1981/09/21
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
New Brackets Used In Front Floodlamp Lighting Group{7309}
1982/04/19
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Improved Rotating Warning Lamp Group Available{7328}
1985/03/25
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
New Front Housing Has Stronger Boss For Alternator{1151}
1977/10/10
New Electric Starting Motor Has Longer Brush Life{1453}
1977/11/14
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Use Improved Heat Start Switch{1416}
1987/04/20
Products Equipped With Diagnostic Connectors Require Less Time For Electrical Troubleshooting{1400}
1987/05/04
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Improved Start Switch Used{1416}
1987/05/25
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Seal And Valve Repair Kit Available for 2G3537 Relay Valve{4280}
1988/10/10
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Shorter Mounting Bolts Used For Glow Plug Wiring{1403,1412}
1979/05/21
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Dual Horsepower Solenoids Improved{1257,1265}
1989/02/20
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
Adjustment Of Neutral-Start Switch Detent Position{7415,1424}
1989/10/16
Adjustment Of Detent Position Of Neutral Start Switch{7415}
1989/11/20
All Wheel Drive Torque Control Setting Procedure{5700,4352}
1990/09/10
Correct Mounting And Maintenance Of Amber Rotating Warning Lamp Group {1431,7530}
1990/10/22
Correct Handling And Replacement of 3T6962 Pressure Switch Assembly{7332}
1990/12/10
New Dual Horsepower Solenoid Assembly Used{1259,1293}
1991/01/14
New Solenoid Assembly With Increased Spring Force Used In Variable Horsepower Arrangement{1250}
1991/08/12
Fitting Needed To Install New Oil Pressure Switch When Replacing Former Switches{7485}
1991/11/25
A Radius On Two Slotted Holes Where 9X0023 Neutral Start/Backup Alarm Switch Moves Improves Switch Life And Operation{1424}
1992/11/16
Catalytic Converter And Exhaust Conditioning Products Available{1091}
1995/01/16
All-inclusive Electrical Schematic Listing{1400}
1995/03/27
Special Instruction
Current Draw Of Electric Starting Motors{1453}
Current Draw Of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Specifications
Electric Starter Motors
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Supplemental Steering Pump
"G" SERIES MOTOR GRADERS SUPPLEMENTAL STEERING SYSTEM
Motor - 24 Volt<BR> (2G5515)
"G" SERIES MOTOR GRADERS SUPPLEMENTAL STEERING SYSTEM
Relief Valve<BR> (4T1056)
"G" SERIES MOTOR GRADERS SUPPLEMENTAL STEERING SYSTEM
Electric Drive Pump Groups
"G" SERIES MOTOR GRADERS SUPPLEMENTAL STEERING SYSTEM
Service Magazine
Maximum Permissible Rates For Case Drain Leakage Permit Field Checks Of Piston-Type Hydraulic Pumps And Motors{5070,5058}
1980/09/01
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Remanufactured Caterpillar Piston Pump And Motor Barrels Available{5070,3208,4351,5058}
1990/12/17
Part Numbers for Electric Motors That Are Used in HVAC Have Changed {5927}
2001/01/22
An Improved Starting Motor is Now Available {1453}
2007/04/30
A New Starter Solenoid is Now Available {1467}
2008/03/17
Special Instruction
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Replacement Relays Available{4493}
Service Replacement Relays Available{4493}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Replacement Relays Available{4493}
Service Replacement Relays Available{4493}
Service Magazine
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>&reg;</SUP> Product {1463}
2014/03/04
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Specifications
Alternator And Regulator
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Alternator Regulator
3306 VEHICULAR ENGINE
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Special Instruction
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Installation Of Attachment Ether Starting Aid Groups{1456}
Installation Of Attachment Ether Starting Aid Groups{1456}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Tool Operating Manual
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Troubleshooting
MID 122 - CID 0269 - FMI 03
Product Link 121S/300
MID 122 - CID 0269 - FMI 04
Product Link 121S/300
Disassembly and Assembly
Coolant Temperature Sensor - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Engine Oil Pressure Sensor - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Atmospheric Pressure Sensor - Remove and Install
C7
Engines for Caterpillar Built Machines
Coolant Temperature Sensor - Remove and Install
C7
Engines for Caterpillar Built Machines
Engine Oil Pressure Sensor - Remove and Install
C7
Engines for Caterpillar Built Machines
Injection Actuation Pressure Sensor - Remove and Install
C7
Engines for Caterpillar Built Machines
Turbocharger Outlet Pressure Sensor - Remove and Install
C7
Engines for Caterpillar Built Machines
Speed/Timing Sensor - Remove and Install
C7
Engines for Caterpillar Built Machines
Inlet Air Temperature Sensor - Remove and Install
C7
Engines for Caterpillar Built Machines
Fuel Pressure Sensor - Remove and Install
C7
Engines for Caterpillar Built Machines
Service Magazine
Dirty Batteries Cause Light In LED's Of EMS Panel With Disconnect Switch Off{7490,1401}
1981/09/21
Coolant Flow Circuit Can Be Added To Electronic Monitoring System (EMS) {7490,1380,1375,1350,7400}
1981/10/26
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Integral Connector Now Used On The Air Conditioning Condenser Fan Motor Relay Assembly{1408,7320}
1996/04/29
Procedure for the Removal of the Pressure Gauges for the All Wheel Drive Arrangement {1408}
2000/11/13
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Special Instruction
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Service Magazine
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
New Dual Horsepower Solenoid Assembly Used{1259,1293}
1991/01/14
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
Special Instruction
Installation of 9X3289 Solenoid Assembly on Machines Equipped with Dual Horsepower Control{1000}
Installation of 9X3289 Solenoid Assembly on Machines Equipped with Dual Horsepower Control{1000}
Installation and Adjustment of 9X9524 Solenoid Assembly on Machines Equipped with Dual Horsepower Control{1000}
Installation and Adjustment of 9X9524 Solenoid Assembly on Machines Equipped with Dual Horsepower Control{1000}
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Specifications
Starter Solenoids
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Shutoff Solenoids<BR> Activated To Shutoff
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Accumulator Solenoid Valve Group
12G, 120G, 130G & 140G MOTOR GRADERS HYDRAULIC SYSTEM & STEE
Starter Solenoids
3306 VEHICULAR ENGINE
Shutoff Solenoid
3306 VEHICULAR ENGINE
Disassembly and Assembly
Air Inlet Heater Solenoid - Remove and Install
C7
Engines for Caterpillar Built Machines
Service Magazine
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Dual Horsepower Solenoids Improved{1257,1265}
1989/02/20
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
New Dual Horsepower Solenoid Assembly Used{1259,1293}
1991/01/14
New Solenoid Assembly With Increased Spring Force Used In Variable Horsepower Arrangement{1250}
1991/08/12
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
A New Mechanically Sealed Coil Has Improved Moisture Integrity Which Will Help to Extend the Life of the Coil {1554}
2002/03/25
Special Instruction
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Specifications
Shutoff Solenoids<BR> Activated To Shutoff
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Shutoff Solenoid
3306 VEHICULAR ENGINE
Disassembly and Assembly
Fuel Shutoff Solenoid - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
Adjustment Of Neutral-Start Switch Detent Position{7415,1424}
1989/10/16
Special Instruction
Installation Of Attachment Ether Starting Aid Groups{1456}
Installation Of Attachment Ether Starting Aid Groups{1456}
Specifications
Ether Atomizer
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Glow Plug Positioning<BR> (PC Engines)
3306 VEHICULAR ENGINE
Service Magazine
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
New Glow Plug Wiring Harness Prevents Short Circuit{1403}
1978/08/07
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Shorter Mounting Bolts Used For Glow Plug Wiring{1403,1412}
1979/05/21
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
A New Ether Cylinder O-ring is Now Used on All Caterpillar Products {1456}
2013/09/19
Special Instruction
Current Draw Of Electric Starting Motors{1453}
Current Draw Of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Service Magazine
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Identification Plate For Starting/Charging Diagnostic Connector {1450,7557,7569}
1994/02/28
General Service Information
Introduction
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES
Delco Remy
DELCO REMY CRANKING MOTORS 30-MT, 35-MT, 40-MT, 50-MT SERIES
Engine News
Caterpillar Remanufactured Electric Starting Motors Are Improved {1453}
2011/05/16
Special Instruction
Current Draw Of Electric Starting Motors{1453}
Current Draw Of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Starting Motor Solenoid - Replace {1467}
Starting Motor Solenoid - Replace {1467}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Electric Starter Motors
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Starter Solenoids
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Starter Magnetic Switches
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Starter Motors
3306 VEHICULAR ENGINE
Starter Solenoids
3306 VEHICULAR ENGINE
Starter Magnetic Switches
3306 VEHICULAR ENGINE
Starting Motor
37-MT, 41-MT, and 42-MT Series Starting Motors
Systems Operation
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Component Description
37-MT, 41-MT, and 42-MT Series Starting Motors
Normal Operation
37-MT, 41-MT, and 42-MT Series Starting Motors
Testing and Adjusting
No Load - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Brush and Brush Holder - Check
37-MT, 41-MT, and 42-MT Series Starting Motors
Pinion Clearance - Adjust
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Solenoid - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Troubleshooting
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Does Not Turn or Turns Slowly
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Disassembly and Assembly
Electric Starting Motor
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Electric Starting Motor
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Starting Motor - Disassemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Disassemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Electric Starting Motor - Remove and Install
C7
Engines for Caterpillar Built Machines
Service Magazine
Caterpillar Electric Starting Motors{1453,1407}
1982/03/22
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
New Electric Starting Motor Has Longer Brush Life{1453}
1977/11/14
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
New PRELUB Systems Available For Medium To Large Caterpillar Construction Equipment {1319}
1992/04/06
0R5207 Remanufactured Starter May Not Fit In Some Applications{1453}
1993/11/29
New Starting Motors Used {1453}
2002/05/13
Examine Failed Starting Motors to Understand the Reason for Failure {1453}
2002/10/28
Improved Remanufactured Heavy-Duty Starting Motors Are Available {1453}
2003/11/10
An Improved Starting Motor Is Used on Certain C7 Machine Engines {1408, 1453}
2014/06/06
Specifications
Backup Warning Switch
12G, 120G, 130G & 140G MOTOR GRADERS POWER TRAIN
Air Pressure Switch<BR> (7D7378)
120G, 130G & 140G MOTOR GRADERS AIR SYSTEM AND BRAKES
Air Pressure Switch<BR> (9G8009)
120G, 130G & 140G MOTOR GRADERS AIR SYSTEM AND BRAKES
Pressure Switch<BR> (4D4785)
120G, 130G & 140G MOTOR GRADERS AIR SYSTEM AND BRAKES
Stoplight Switch<BR> (2M9346)
120G, 130G & 140G MOTOR GRADERS AIR SYSTEM AND BRAKES
Service Magazine
Dirty Batteries Cause Light In LED's Of EMS Panel With Disconnect Switch Off{7490,1401}
1981/09/21
Correct Usage Of Low Fuel Level Switches{7481}
1984/01/09
Improved Thermostat Switch Used In Air Conditioner Groups{7320,7332}
1984/05/07
Make Sure Back-Up Alarm Switch Is Correctly Installed{7406}
1985/05/20
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Use Improved Heat Start Switch{1416}
1987/04/20
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Improved Start Switch Used{1416}
1987/05/25
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19

Truck sale:

Caterpillar 140G
 
Caterpillar 140G
- motor graders
ZIEGLER CAT
Caterpillar 140G, motor graders, Construction
68,000 
Caterpillar 140G, motor graders, Construction
- motor graders
MICHIGAN CAT
Caterpillar 140 GC, motor graders, Construction
225,000 
Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.
Caterpillar 140 GC, motor graders, Construction
247,000 
Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.
Caterpillar 140G, motor graders, Construction
69,000 
Caterpillar 140G, motor graders, Construction
- motor graders
ZIEGLER CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.