275-0596 WIRING GP-HEATER S/N TX71-UP; KHX16810-UP 24-VOLT 140G MOTOR GRADER



ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
CONVERSION GP
ELECTRICAL AND STARTING SYSTEM
CONTROL GP-UNPROGRAMMED
OPERATOR STATION
PANEL GP
HEATER GP
MONITOR GP
FUEL SYSTEM
CONTROL GP-GOVERNOR
SERVICE EQUIPMENT AND SUPPLIES
GASKET & SEAL KITS
OPERATOR STATION
PANEL GP

MOTOR GRADER 140G MOTOR GRADER 72V
 C7 Engine Emissions Retrofit Repower Tier III For 140G Motor Grader 72V00001-UP (MACHINE) SEBP5319 140G 72V   (1974)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-ELECTRONIC CONTROL
399-2133 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ENGINE
198-2714 WIRING GP-ENGINE
WIRING GP-HEATER
275-0596 WIRING GP-HEATER
 

#SEBP53190150
 

275-0596: WIRING GP-HEATER

275-0596 WIRING GP-HEATER
S/N TX71-UP; KHX16810-UP
24-VOLT
i02541023 SEBP5319
2750596 WIRING GP-HEATER Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 3S-2093 [1] STRAP-CABLE (PLASTIC)  
2. 229-8851 [1] CABLE AS  
  6V-9023 E TUBE-HEAT SHRINK (12.7-MM DIA)(3-CM)  
  030-1712 [1] TERMINAL-RING (2-GA, 1/4-IN SCREW)  
  135-2543 [1] BOOT (RED)  
3. 283-1224 [1] BRACKET AS  
4. 208-9277 M [2] BOLT-FLANGE HEAD (M6X1X20-MM)  
5. 208-9282 M [1] BOLT (M8X1.25X25-MM)  
6. 208-9283 M [2] BOLT-FLANGE HEAD (M8X1.25X30-MM)  
7. 398-0940 Y [1] SWITCH GP-MAGNETIC (24-VOLT)  
8. 6V-5192 M [1] BOLT-SOCKET HEAD (M8X1.25X30-MM)  
9. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP53190151
 

342-8652: CONVERSION GP-POWER TRAIN

342-8652 CONVERSION GP-POWER TRAIN
S/N 72V1-UP
PART OF 330-9479 CONVERSION AR-MACHINE
FOR USE WITH 140G RETROFIT REPOWER TIER III
i03915552 SEBP5319
  For full view, you need register

Parts for your 140G MOTOR GRADER:

Pos. Part No Qty Parts name Comments
  266-9180 [1] ADAPTER  
  0L-0478 [4] BOLT (3/8-24X1.75-IN)  
  0S-1571 [4] BOLT (3/8-16X1.75-IN)  
  8T-9101 [11] BOLT (3/8-16X2.75-IN)  
  260-3127 J [2] BOLT-SELF-LOCKING (1/2-13X1.25-IN)  
  5D-1026 [1] CLAMP-BAND  
  5P-0597 J [4] CLAMP-HOSE  
  124-2153 [1] COUPLING  
  343-8308 [1] COUPLING  
  124-2121 [3] COUPLING-PERMANENT  
  6V-9182 [2] ELBOW  
  205-3673 J [1] HOSE  
  122-6872 G HOSE-HYDRAULIC  
    (REQUIRES 41-IN)
  6V-8801 [1] NUT (3/8-16-THD)  
  5M-6200 [1] SEAL-O-RING  
  5P-9806 [1] SEAL-O-RING  
  6V-9746 [4] SEAL-O-RING  
  7F-8268 J [1] SEAL-O-RING  
  7M-8485 [2] SEAL-O-RING  
  8F-6711 [1] SEAL-O-RING  
  2M-2488 [1] STUD-TAPERLOCK (3/8-16X3.59-IN)  
  205-1906 J [1] TUBE AS  
  8F-8151 [1] VALVE-SHUTOFF (TRANSMISSION OIL COOLER)  
  5P-1075 [12] WASHER-HARD (10.2X22.5X3-MM THK)  
  8T-4223 J [2] WASHER-HARD (13.5X25.5X3-MM THK)  
  G   ORDER BY THE INCH
  J   DIFFERENTIAL OIL FILL
 

#SEBP53190152
 

239-5025: CONTROL GP-UNPRGMED MONITOR

239-5025 CONTROL GP-UNPRGMED MONITOR -MESSENGER
S/N 72V1-UP
INDUSTRIAL
PART OF 243-3820 MODULE GP-DISPLAY
i02113043 SEBP5319
2395025 CONTROL GP-UNPRGMED MONITOR Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP53190153
 

155-6003: GAUGE GP-COOLANT TEMPERATURE

155-6003 GAUGE GP-COOLANT TEMPERATURE -TRANSLUCENT FACE
S/N 72V1-UP
24-VOLT. FOR LED BACKLIGHTING
FIELD REPLACEMENT FOR @@@@@ 4W-0483@@@@@
i01172077 SEBP5319
1556003 GAUGE GP-COOLANT TEMPERATURE Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 6V-8368 [3] NUT (6-32-THD)  
2. 4B-5324 [3] WASHER (3.9X9.6X1.2-MM THK)  
3. 3L-8187 [3] LOCKWASHER  
4. 6V-8377 [2] NUT (8-32-THD)  
5. 9B-7233 [2] LOCKWASHER  
 

#SEBP53190154
 

4W-0483: GAUGE GP-COOLANT TEMPERATURE

4W-0483 GAUGE GP-COOLANT TEMPERATURE
S/N 72V1-UP
24-VOLT
PART OF 342-8650 CONVERSION GP-ELECTRICAL, 459-6790 KIT-ENGINE CONVERSION
OPTIONAL FIELD REPLACEMENT ORDER @@@@@155-6003@@@@@
i01728836 SEBP5319
4W0483 GAUGE GP-COOLANT TEMPERATURE Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 6V-8368 [3] NUT (6-32-THD)  
2. 4B-5324 [3] WASHER (3.9X9.6X1.2-MM THK)  
3. 3L-8187 [3] LOCKWASHER  
4. 6V-8377 [2] NUT (8-32-THD)  
5. 9B-7233 [2] LOCKWASHER  
   
  6V-3507 F [1] SEAL-RECTANGULAR  
  F   NOT SHOWN
 

#SEBP53190155
 

255-1248: LINES GP-HEATER

255-1248 LINES GP-HEATER
S/N 72V1-UP
PART OF 342-8649 CONVERSION GP-COOLING SYSTEM
i04079419 SEBP5319
2551248 LINES GP-HEATER Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 156-5782 [1] SPACER (17.5X30X10-MM THK)  
2. 194-4864 [1] ELBOW  
3. 290-3385 [1] PLATE AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
4. 355-8950 C [1] TUBE AS  
5. 091-0081 [1] SPACER (10.5X20X10-MM THK)  
6. 124-6257 C [4] CLAMP-HOSE  
7. 150-4048 C [1] ELBOW AS  
  6V-8722 [1] ELBOW  
  3K-0360 [1] SEAL-O-RING  
  7J-9108 [1] SEAL-O-RING  
8. 2M-9780 [1] SEAL-O-RING  
9. 3E-4321 C [1] CLIP (LOOP)  
10. 6K-8178 [1] CLIP (LOOP)  
11. 7X-0510 [1] WASHER-HARD (15.5X29X3-MM THK)  
12. 8C-3425 M [1] BOLT (M14X2X35-MM)  
13. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
15. 5P-0767 CE HOSE (140.2-CM)  
15A. 5P-0767 E HOSE (162.7-CM)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP53190156
 

243-3820: MODULE GP-DISPLAY

243-3820 MODULE GP-DISPLAY -MESSENGER
S/N 72V1-UP
PART OF 342-8655 CONVERSION AR-MACHINE
i02035474 SEBP5319
  For full view, you need register

Parts for your 140G MOTOR GRADER:

Pos. Part No Qty Parts name Comments
  239-5025 Y [1] CONTROL GP-UNPRGMED MONITOR (MESSENGER)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP53190157
 

209-3377: PEDAL GP-GOVERNOR

209-3377 PEDAL GP-GOVERNOR
S/N 72V1-UP
PART OF 288-8045 CONTROL GP-GOVERNOR
i02097822 SEBP5319
2093377 PEDAL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 266-1467 Y [1] SENSOR GP-POSITION (ROTARY)  
2. 096-3772 M [4] SCREW-MACHINE (M4X0.7X16-MM)  
3. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
4. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
5. 8T-6902 [2] CLIP  
   
    AVAILABLE REPAIR KIT(S):
  243-0062 [1] KIT-REPAIR (GOVERNOR PEDAL)  
    (INCLUDES SHAFT, CLIPS & BEARINGS)
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP53190158
 

8C-8741: KIT-GASKET

8C-8741 KIT-GASKET -REAR STRUCTURE
S/N 72V1-UP
FIELD INSTALLATION
i04901845 SEBP5319
  For full view, you need register

Parts for your 140G MOTOR GRADER:

Pos. Part No Qty Parts name Comments
  2A-1162 [1] GASKET  
  4H-7869 [1] GASKET  
  9H-5921 [1] GASKET  
  7C-4297 [1] SEAL GP-CRANKSHAFT  
  9H-5921 [1] GASKET  
 

#SEBP53190159
 

366-4622: KIT-SERVICE METER

366-4622 KIT-SERVICE METER
S/N 72V1-UP
RELEASED TO PROVIDE A SERVICE KIT FOR DIGITAL HOURMETER WITH IMPROVED ELECTRICAL PROTECTION
PART OF 459-6790 KIT-ENGINE CONVERSION
i05340278 SEBP5319
  For full view, you need register

Parts for your 140G MOTOR GRADER:

Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

Information:

Engine News
Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/07/01
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Installation Of 9G6981 And 7T8000 Voltage Converter Assemblies{1421}
Installation Of 9G6981 And 7T8000 Voltage Converter Assemblies{1421}
Installation of Electrical Connectors at The Articulation Joint{1408}
Installation of Electrical Connectors at The Articulation Joint{1408}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Replacement Relays Available{4493}
Service Replacement Relays Available{4493}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Installation Procedure for the Machine Security System (MSS3s) Universal Attachment Kit {1408, 1435, 7631}
Installation Procedure for the Machine Security System (MSS3s) Universal Attachment Kit {1408, 1435, 7631}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
The 108-0358 Electronic Flasher Assembly Is Not A Drop-in Replacement For The 8D-6946 Flasher
The 108-0358 Electronic Flasher Assembly Is Not A Drop-in Replacement For The 8D-6946 Flasher
A Procedure Is Available to Adapt the Glow Plug Harness to Certain Engines{1403, 1412}
A Procedure Is Available to Adapt the Glow Plug Harness to Certain Engines{1403, 1412}
Specifications
Glow Plug Positioning<BR> (PC Engines)
3306 VEHICULAR ENGINE
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Systems Operation
Switches
Electronic Monitoring System
Action Lamp
Electronic Monitoring System
Action Alarm
Electronic Monitoring System
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Letter-APD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Testing and Adjusting
System Schematic
Machine Security System
Electrical Connector - Inspect
Machine Security System
Electrical Connector - Inspect
Product Link - PL522/523
Wiring Harness (Open Circuit) - Test
Product Link - PL522/523
Wiring Harness (Short Circuit) - Test
Product Link - PL522/523
Electrical Connector - Inspect
Product Link 121S/300
Wiring Harness (Open Circuit) - Test
Product Link 121S/300
Wiring Harness (Short Circuit) - Test
Product Link 121S/300
System Schematic
MSS3s Machine Security System
Wiring Harness (Open Circuit) - Test
Electronic Monitoring System
Wiring Harness (Short Circuit) - Test
Electronic Monitoring System
Electrical Connector - Inspect
Electronic Monitoring System
Troubleshooting
Electrical Component and Connector Locations
Machine Security System
MID 122 - CID 0269 - FMI 03
Product Link 121S/300
MID 122 - CID 0269 - FMI 04
Product Link 121S/300
Cat Data Link - Test
MSS3s Machine Security System
Wiring Harness (Open Circuit) - Test
MSS3s Machine Security System
Wiring Harness (Short Circuit) - Test
MSS3s Machine Security System
Connector Locations
MSS3s Machine Security System
Connector Contact Description
MSS3s Machine Security System
Electrical Connector - Inspect
MSS3s Machine Security System
Action Alarm Does Not Sound
Electronic Monitoring System
Action Alarm Is On Continuously
Electronic Monitoring System
Action Alarm Sounds with Engine Off
Electronic Monitoring System
Action Lamp Does Not Flash
Electronic Monitoring System
Action Lamp Is On Continuously
Electronic Monitoring System
Test Switch
Electronic Monitoring System
Disassembly and Assembly
Fuse Panel
12G, 14G, 16G, 120G, 130G & 140G MOTOR GRADERS OPERATOR'S ST
Batteries
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Batteries
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Service Magazine
Dirty Batteries Cause Light In LED's Of EMS Panel With Disconnect Switch Off{7490,1401}
1981/09/21
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
New Glow Plug Wiring Harness Prevents Short Circuit{1403}
1978/08/07
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Shorter Mounting Bolts Used For Glow Plug Wiring{1403,1412}
1979/05/21
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
All Wheel Drive System Disabled For Shipping Purposes{7500}
1989/07/03
Correct Mounting And Maintenance Of Amber Rotating Warning Lamp Group {1431,7530}
1990/10/22
Correct Handling And Replacement of 3T6962 Pressure Switch Assembly{7332}
1990/12/10
New Hydraulic Oil Temperature Switch Harness Assembly Used {1408,1402,5731,5734,7413,7488,7490,7553,7556}
1991/07/22
Correct Mounting Of 2M9346 Pressure Switch (Stop Lamp Switch) {1400}
1991/10/21
Fitting Needed To Install New Oil Pressure Switch When Replacing Former Switches{7485}
1991/11/25
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
New Pressure Switch Assembly Is Available For Fuel Applications; 9G-8011 Pressure Switch Assembly Should Not Be Used In Fuel Applications {7414}
1996/02/12
Integral Connector Now Used On The Air Conditioning Condenser Fan Motor Relay Assembly{1408,7320}
1996/04/29
Parts Manuals May List Air Conditioning Compressors Incorrectly {1802,1809,7320}
1996/10/07
Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
2000/04/10
Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/06/26
Procedure for the Removal of the Pressure Gauges for the All Wheel Drive Arrangement {1408}
2000/11/13
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2000/10/09
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21
An Improved Starting Motor Is Used on Certain C7 Machine Engines {1408, 1453}
2014/06/06
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>&reg;</SUP> Product {1463}
2014/03/04
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog 140G :

WIRING GP-ENGINE
198-2714 WIRING GP-ENGINE
WIRING GP-ELECTRONIC CONTROL
399-2133 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
399-2133 WIRING GP-ELECTRONIC CONTROL
VALVE GP-ETHER STARTING
239-1134 VALVE GP-ETHER STARTING
SWITCH GP-TOGGLE
139-2116 SWITCH GP-TOGGLE
SWITCH GP-PRESSURE
275-1253 SWITCH GP-PRESSURE
SWITCH GP-MAGNETIC
398-0940 SWITCH GP-MAGNETIC
SWITCH GP-MAGNETIC
125-1302 SWITCH GP-MAGNETIC
342-8652 CONVERSION GP-POWER TRAIN
CONTROL GP-UNPRGMED MONITOR
239-5025 CONTROL GP-UNPRGMED MONITOR
GAUGE GP-COOLANT TEMPERATURE
155-6003 GAUGE GP-COOLANT TEMPERATURE
GAUGE GP-COOLANT TEMPERATURE
4W-0483 GAUGE GP-COOLANT TEMPERATURE
LINES GP-HEATER
255-1248 LINES GP-HEATER
243-3820 MODULE GP-DISPLAY
PEDAL GP-GOVERNOR
209-3377 PEDAL GP-GOVERNOR
8C-8741 KIT-GASKET

Truck sale:

Caterpillar 140G
 
Caterpillar 140G
- motor graders
ZIEGLER CAT
Caterpillar 140G, motor graders, Construction
68,000 
Caterpillar 140G, motor graders, Construction
- motor graders
MICHIGAN CAT
Caterpillar 140 GC, motor graders, Construction
225,000 
Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.
Caterpillar 140 GC, motor graders, Construction
247,000 
Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.
Caterpillar 140G, motor graders, Construction
69,000 
Caterpillar 140G, motor graders, Construction
- motor graders
ZIEGLER CAT