202-1259 CYLINDER BLOCK AS S/N 6AB1-UP; 6BB1-UP; 5EW1-UP; 6CB1-UP; 6EB1-UP; 6GB1-UP; 6YF1-UP; 7CG1-UP; 4SK1-UP; 6BK1-UP; 1DL1-UP PART OF 108-3916 CYLINDER BLOCK GP 814B

BASIC ENGINE

CYLINDER BLOCK GP

0. 202-1259 CYLINDER B
1. 463-3536 CYLINDER B
2. 108-3916 CYLINDER B
3. 152-7642 CYLINDER B
4. 152-7644 CYLINDER B
5. 152-7646 CYLINDER B
6. 202-1258 CYLINDER B
7. 7E-4697 CYLINDER B
8. 7E-4697 CYLINDER B
9. 7E-4697 CYLINDER B
0. INFORMATION

WHEEL DOZER 814B WHEEL DOZER 16Z
3406 Engine Emissions Retrofit Upgrade Tier I for 621E,621F,623E,623F,627E,627F, and 814B Tractor and Scraper 16Z00001-UP (MACHINE) SEBP5324 814B 16Z (1981)

BASIC ENGINE

CYLINDER BLOCK GP

9N-0684 COVER GP-CYLINDER BLOCK

202-1257 CYLINDER BLOCK AS

202-1259 CYLINDER BLOCK AS

463-3536 CYLINDER BLOCK AS

108-3916 CYLINDER BLOCK GP

152-7642 CYLINDER BLOCK GP

#SEBP53240030

202-1259: CYLINDER BLOCK AS

CYLINDER BLOCK AS

202-1259 CYLINDER BLOCK AS
S/N 6AB1-UP; 6BB1-UP; 5EW1-UP; 6CB1-UP; 6EB1-UP; 6GB1-UP; 6YF1-UP; 7CG1-UP; 4SK1-UP; 6BK1-UP; 1DL1-UP
PART OF 108-3916 CYLINDER BLOCK GP

i01662543 SEBP5324

For full view, you need register

Parts for your 814B WHEEL DOZER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	463-3546	[1]	CYLINDER BLOCK AS
	9H-1031	[14]	WASHER-HARD (24X41.5X6-MM THK)
	167-8081	[7]	CAP-CRANKSHAFT BEARING
	167-8083	[14]	BOLT (7/8-14X7.5-IN)
2.	4N-0685	[6]	BUSHING (1-IN WIDE)
3.	4N-6658	[1]	BUSHING (1.3-IN WIDE)

#SEBP53240031

463-3536: CYLINDER BLOCK AS

CYLINDER BLOCK AS

463-3536 CYLINDER BLOCK AS
PART OF 202-1258 CYLINDER BLOCK GP

i06280842 SEBP5324

For full view, you need register

Parts for your 814B WHEEL DOZER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4N-0685	[6]	BUSHING (1-IN WIDE)
2.	4N-6658	[1]	BUSHING (1.3-IN WIDE)
3.	202-1257 Y	[1]	CYLINDER BLOCK AS
	Y		SEPARATE ILLUSTRATION

#SEBP53240032

108-3916: CYLINDER BLOCK GP

CYLINDER BLOCK GP

108-3916 CYLINDER BLOCK GP
S/N 6AB1-UP; 6BB1-UP; 5EW1-UP; 6CB1-UP; 6EB1-UP; 6GB1-UP; 6YF1-UP; 7CG1-UP; 4SK1-UP; 6BK1-UP; 1DL1-UP
FIELD REPLACEMENT FOR @@@@@ 7E-4697@@@@@

i01662537 SEBP5324

For full view, you need register

Parts for your 814B WHEEL DOZER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	119-5155	[1]	SEAL-O-RING
2.	8T-6757	[3]	PLUG-PIPE
3.	7W-6534	[1]	PLUG-PIPE (HEX)
4.	9S-8009	[1]	PLUG-O-RING (STRAIGHT THREAD O-RING)
5.	8T-6763	[3]	PLUG-PIPE (1/4-18-THD)
6.	9S-4190	[2]	PLUG-O-RING (7/8-14-THD)
7.	8T-6764	[1]	PLUG-PIPE (1/8-27-THD)
8.	7W-6492	[1]	PLUG-PIPE (1/2-14-THD)
9.	030-7571	[4]	BOLT (3/8-16X1-IN)
10.	4W-8585	[1]	COVER
11.	7W-6081	[1]	GASKET
12.	9X-7378	[1]	SEAL-O-RING
15.	7X-7732	[6]	PLUG-PIPE
16.	114-4427	[2]	SEAL-O-RING
17.	8S-9094	[1]	PLUG-ORIFICE
18.	202-1259 CY	[1]	CYLINDER BLOCK AS
19.	250-0466	[2]	SEAL-O-RING
20.	100-7399	[2]	PLUG
21.	9S-4182	[1]	PLUG (7/16-20-THD)(DRAIN)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP53240033

152-7642: CYLINDER BLOCK GP

CYLINDER BLOCK GP

152-7642 CYLINDER BLOCK GP
FIELD REPLACEMENT FOR @@@@@ 7E-4697@@@@@

i00729861 SEBP5324

For full view, you need register

Parts for your 814B WHEEL DOZER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-6757	[3]	PLUG-PIPE
2.	7W-6534	[1]	PLUG-PIPE
3.	152-7644 Y	[1]	CYLINDER BLOCK GP
4.	8T-6763	[3]	PLUG-PIPE (1/4-18-THD)
5.	7W-6492	[1]	PLUG-PIPE (1/2-14-THD)
6.	119-5155	[1]	SEAL-O-RING
7.	030-7571	[4]	BOLT (3/8-16X1-IN)
8.	4W-8585	[1]	COVER
9.	7W-6081	[1]	GASKET
11.	8S-9094	[1]	PLUG-ORIFICE
12.	9S-4190	[2]	PLUG-O-RING (7/8-14-THD)
13.	114-4427	[2]	SEAL-O-RING
14.	8T-6767	[6]	PLUG-PIPE (3/8-18-THD)
15.	4N-0685	[6]	BUSHING (1-IN WIDE)
16.	4N-6658	[1]	BUSHING (1.3-IN WIDE)
17.	8T-6764	[1]	PLUG-PIPE (1/8-27-THD)
18.	9S-8009	[1]	PLUG-O-RING
19.	100-7399	[2]	PLUG
20.	3E-6747	[2]	SEAL-O-RING
21.	9S-4182	[1]	PLUG (7/16-20-THD)
22.	9X-7378	[1]	SEAL-O-RING
	Y		SEPARATE ILLUSTRATION

#SEBP53240034

152-7644: CYLINDER BLOCK GP

CYLINDER BLOCK GP

152-7644 CYLINDER BLOCK GP
PART OF 152-7642 CYLINDER BLOCK GP

i00734657 SEBP5324

For full view, you need register

Parts for your 814B WHEEL DOZER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3P-1323	[14]	BOLT-BEARING CAP (7/8-14X7.75-IN)
2.	9H-1031	[14]	WASHER-HARD (24X41.5X6-MM THK)
3.	4N-0795	[7]	CAP-CRANKSHAFT BEARING

#SEBP53240035

152-7646: CYLINDER BLOCK GP

CYLINDER BLOCK GP

152-7646 CYLINDER BLOCK GP
PART OF 7E-4697 CYLINDER BLOCK GP
FIELD REPLACEMENT FOR @@@@@7E-4697@@@@@

i00734532 SEBP5324

For full view, you need register

Parts for your 814B WHEEL DOZER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	197-9322	[6]	LINER-CYLINDER BLOCK
2.	9L-5854	[6]	BAND-FILLER (130.2-MM ID)
3.	110-2220	[6]	SEAL-LINER
4.	3P-1323	[14]	BOLT-BEARING CAP (7/8-14X7.75-IN)
5.	9H-1031	[14]	WASHER-HARD (24X41.5X6-MM THK)
6.	4N-5857	[7]	CAP-CRANKSHAFT BEARING (MAIN BEARING)
7.	142-7072	[6]	SEAL-LINER
8.	142-6217	[6]	SEAL-O-RING
10.	4N-0685	[6]	BUSHING (1-IN WIDE)
11.	4N-6658	[1]	BUSHING (1.3-IN WIDE)

#SEBP53240036

202-1258: CYLINDER BLOCK GP

CYLINDER BLOCK GP

202-1258 CYLINDER BLOCK GP
PART OF 7E-4697 CYLINDER BLOCK GP

i01538305 SEBP5324

For full view, you need register

Parts for your 814B WHEEL DOZER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9L-5854	[6]	BAND-FILLER (130.2-MM ID)
2.	197-9322	[6]	LINER-CYLINDER BLOCK
3.	463-3536 Y	[1]	CYLINDER BLOCK AS
4.	110-2220	[6]	SEAL-LINER
5.	142-6217	[6]	SEAL-O-RING
6.	142-7072	[6]	SEAL-LINER
	Y		SEPARATE ILLUSTRATION

#SEBP53240037

7E-4697: CYLINDER BLOCK GP

CYLINDER BLOCK GP

7E-4697 CYLINDER BLOCK GP
PART OF 321-6313, 321-6314, 321-6315, 321-6316 ENGINE AR
Type 1
FIELD REPLACEMENT ORDER @@@@@108-3916@@@@@, @@@@@152-7642@@@@@, 6- 7E-3632 JET AS-PISTON COOLING, 6-111-8606 BOLT-SPECIAL

i00405134 SEBP5324

For full view, you need register

Parts for your 814B WHEEL DOZER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7E-3632	[6]	JET AS-PISTON COOLING
2.	9F-2247	[3]	PLUG-PIPE
3.	7M-7410 B	[1]	PLUG-PIPE
4.	9S-8009	[1]	PLUG-O-RING
5.	7H-3171	[3]	PLUG-PIPE
6.	1S-9540	[2]	DOWEL
7.	3S-5496	[2]	SEAL-O-RING
8.	3J-5389	[1]	PLUG (EXTERNAL)
9.	030-7571	[4]	BOLT (3/8-16X1-IN)
10.	4W-8585	[1]	COVER
11.	7W-6081	[1]	GASKET
12.	2M-6471	[2]	PLUG-CUP
13.	4N-0683	[4]	DOWEL
14.	4N-1650	[2]	DOWEL
15.	2W-8601	[1]	PLATE-SPACER
16.	7C-3037	[1]	GASKET-PLATE
17.	8S-9094	[1]	PLUG-ORIFICE
18.	9S-4190	[2]	PLUG-O-RING (7/8-14-THD)
19.	2M-9780	[2]	SEAL-O-RING
20.	3J-5390	[6]	PLUG (3/8-18-THD)
21.	7E-6479	[6]	BOLT-SPECIAL (OIL JET)
22.	4N-0685	[6]	BUSHING (1-IN WIDE)
23.	4N-6658	[1]	BUSHING (1.3-IN WIDE)
24.	5M-6214	[1]	PLUG (1/8-27 PTF)
25.	8N-9266	[1]	CYLINDER BLOCK AS
26.	9L-5854	[6]	BAND-FILLER (130.2-MM ID)
27.	6V-5121	[18]	SEAL-O-RING
28.	3P-1323	[14]	BOLT-BEARING CAP (7/8-14X7.75-IN)
29.	9H-1031	[14]	WASHER-HARD (24X41.5X6-MM THK)
30.	7W-3550	[6]	LINER-CYLINDER BLOCK
31.	4N-5857	[7]	CAP-CRANKSHAFT BEARING
32.	4K-1388	[1]	SEAL-O-RING
	B		USE AS REQUIRED
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP53240038

7E-4697: CYLINDER BLOCK GP

CYLINDER BLOCK GP

7E-4697 CYLINDER BLOCK GP
PART OF 321-6313, 321-6314, 321-6315, 321-6316 ENGINE AR
Type 2
FIELD REPLACEMENT ORDER @@@@@108-3916@@@@@, @@@@@152-7642@@@@@, 6- 7E-3632 JET AS-PISTON COOLING, 6-111-8606 BOLT-SPECIAL

i00405157 SEBP5324

For full view, you need register

Parts for your 814B WHEEL DOZER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7E-3632	[6]	JET AS-PISTON COOLING
2.	8T-6757 C	[3]	PLUG-PIPE
3.	7M-7410	[1]	PLUG-PIPE
4.	9S-8009	[1]	PLUG-O-RING
5.	8T-6763 C	[3]	PLUG-PIPE (1/4-18-THD)
6.	1S-9540	[2]	DOWEL
7.	3S-5496	[2]	SEAL-O-RING
8.	7W-6492 C	[1]	PLUG-PIPE (1/2-14-THD)
9.	030-7571	[4]	BOLT (3/8-16X1-IN)
10.	4W-8585	[1]	COVER
11.	7W-6081	[1]	GASKET
12.	2M-6471	[1]	PLUG-CUP
13.	4N-0683	[4]	DOWEL
14.	4N-1650	[2]	DOWEL
15.	6I-2981 C	[1]	PLATE-BLOCK
16.	6I-4024 C	[1]	GASKET-PLATE
17.	8S-9094	[1]	PLUG-ORIFICE
18.	9S-4190 B	[2]	PLUG-O-RING (7/8-14-THD)
19.	2M-9780 B	[2]	SEAL-O-RING
20.	8T-6767 C	[6]	PLUG-PIPE (3/8-18-THD)
21.	7E-6479	[6]	BOLT-SPECIAL (OIL JET)
22.	4N-0685	[6]	BUSHING (1-IN WIDE)
23.	4N-6658	[1]	BUSHING (1.3-IN WIDE)
24.	8T-6764 C	[1]	PLUG-PIPE (1/8-27-THD)
25.	4P-2092	[1]	CYLINDER BLOCK AS
26.	9L-5854	[6]	BAND-FILLER (130.2-MM ID)
27.	6V-5121	[18]	SEAL-O-RING
28.	3P-1323	[14]	BOLT-BEARING CAP (7/8-14X7.75-IN)
29.	9H-1031	[14]	WASHER-HARD (24X41.5X6-MM THK)
30.	7W-3550	[6]	LINER-CYLINDER BLOCK
31.	4N-5857	[7]	CAP-CRANKSHAFT BEARING
32.	4K-1388	[1]	SEAL-O-RING
33.	100-7399	[1]	PLUG
34.	3E-6747	[1]	SEAL-O-RING
	101-0523 FA	[6]	INSERT-LINER SEAT (5.21-MM THK)(0.05MM US)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	F		NOT SHOWN

#SEBP53240039

7E-4697: CYLINDER BLOCK GP

CYLINDER BLOCK GP

7E-4697 CYLINDER BLOCK GP
PART OF 321-6313, 321-6314, 321-6315, 321-6316 ENGINE AR
Type 3
FIELD REPLACEMENT ORDER @@@@@108-3916@@@@@, @@@@@152-7642@@@@@, 6- 7E-3632 JET AS-PISTON COOLING, 6-111-8606 BOLT-SPECIAL

i00122311 SEBP5324

For full view, you need register

Parts for your 814B WHEEL DOZER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7E-3632	[6]	JET AS-PISTON COOLING
2.	8T-6757 C	[3]	PLUG-PIPE
3.	7W-6534	[1]	PLUG-PIPE
4.	108-3913	[1]	CYLINDER BLOCK AS
4A.	9L-5854	[6]	BAND-FILLER (130.2-MM ID)
4B.	110-2220	[6]	SEAL-LINER
4C.	142-7072	[6]	SEAL-LINER
4D.	142-6217	[6]	SEAL-O-RING
4E.	3P-1323	[14]	BOLT-BEARING CAP (7/8-14X7.75-IN)
4F.	9H-1031	[14]	WASHER-HARD (24X41.5X6-MM THK)
4G.	197-9322	[6]	LINER-CYLINDER BLOCK
4H.	4N-5857	[7]	CAP-CRANKSHAFT BEARING
5.	8T-6763 C	[3]	PLUG-PIPE (1/4-18-THD)
6.	1S-9540	[2]	DOWEL
7.	3S-5496	[2]	SEAL-O-RING
8.	7W-6492 C	[1]	PLUG-PIPE (1/2-14-THD)
9.	119-5155	[1]	SEAL-O-RING
10.	030-7571	[4]	BOLT (3/8-16X1-IN)
11.	4W-8585	[1]	COVER
12.	7W-6081	[1]	GASKET
13.	4N-0683	[4]	DOWEL
14.	4N-1650	[2]	DOWEL
15.	6I-2981 C	[1]	PLATE-BLOCK
16.	6I-4024 C	[1]	GASKET-PLATE
17.	8S-9094	[1]	PLUG-ORIFICE
18.	9S-4190 B	[2]	PLUG-O-RING (7/8-14-THD)
19.	114-4427 B	[2]	SEAL-O-RING
20.	7X-7732 C	[6]	PLUG-PIPE
21.	7E-6479	[6]	BOLT-SPECIAL (OIL JET)
22.	4N-0685	[6]	BUSHING (1-IN WIDE)
23.	4N-6658	[1]	BUSHING (1.3-IN WIDE)
24.	8T-6764 C	[1]	PLUG-PIPE (1/8-27-THD)
25.	9S-8009	[1]	PLUG-O-RING
26.	100-7399	[2]	PLUG
27.	3E-6747	[2]	SEAL-O-RING
28.	9S-4182	[1]	PLUG (7/16-20-THD)
29.	9X-7378	[1]	SEAL-O-RING

	101-0523 FA	[6]	INSERT-LINER SEAT (5.21-MM THK)(0.05MM US)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	F		NOT SHOWN

Information:

BASIC ENGINE

CYLINDER BLOCK GP

Special Instruction

Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}

Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}

3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}

Installation Of 2P8774 And 2P8776 Cylinder Block Assemblies{1201}
Installation Of 2P8774 And 2P8776 Cylinder Block Assemblies{1201}

Installation Of Service Replacement Thrust Plates{1203}
Installation Of Service Replacement Thrust Plates{1203}

Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}

Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}

Installation Of 2W3422 Flywheel Housing As The Service Replacement For 8N5013 Flywheel Housing{1157}
Installation Of 2W3422 Flywheel Housing As The Service Replacement For 8N5013 Flywheel Housing{1157}

Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}

Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}

Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}

Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}

Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}

Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}

Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}

Installation Of 0R2554 Remanufactured Short Block Group{1200}
Installation Of 0R2554 Remanufactured Short Block Group{1200}

Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}

Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}

Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Service Letter-NACD

Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Service Letter-Brazil

Service Letter-Truck/Ag/Marine

Specifications

Cylinder Block
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL

Camshaft Bearings
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL

Cylinder Liner
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL

Cylinder Liner Projection
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL

Bearing Surface (Journal) For Main Bearings
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL

Connecting Rod and Main Bearings
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL

Tool Operating Manual

9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}

Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}

Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}

420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}

Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}

Service Letter-China

Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits

Service Letter-Asia

Reuse And Salvage Guidelines

Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}

Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}

Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}

Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}

Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}

Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}

Service Letter-APD

Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits

Disassembly and Assembly

Spacer Plate
3306 VEHICULAR ENGINE FOR 814B TRACTOR, 815B & 816B COMPACTO

Cylinder Liners
3306 VEHICULAR ENGINE FOR 814B TRACTOR, 815B & 816B COMPACTO

Crankshaft Main Bearings
3306 VEHICULAR ENGINE FOR 814B TRACTOR, 815B & 816B COMPACTO

Camshaft Bearings
3306 VEHICULAR ENGINE FOR 814B TRACTOR, 815B & 816B COMPACTO

Crankshaft
3306 VEHICULAR ENGINE FOR 814B TRACTOR, 815B & 816B COMPACTO

Cylinder Liner - Remove
3304B and 3306B Engines for Caterpillar Built Machines

Bearing Clearance - Check
3304B and 3306B Engines for Caterpillar Built Machines

Crankshaft Main Bearings - Remove
3304B and 3306B Engines for Caterpillar Built Machines

Crankshaft Main Bearings - Install
3304B and 3306B Engines for Caterpillar Built Machines

Spacer Plate - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines

Cylinder Liner - Install
3304B and 3306B Engines for Caterpillar Built Machines

Camshaft Bearings - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines

Piston Cooling Jets - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines

Service Magazine

Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21

Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03

Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03

Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11

Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29

New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29

Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16

Reuse Of Engine Bearings{1230}
1983/05/16

Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21

New Connecting Rod And Main Bearings Used{1230,1219,1203}
1984/03/26

Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02

Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08

New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27

Cylinder Head Water Directors No Longer Needed In Direct Injection Engines {1115}
1987/03/09

Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20

5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09

Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12

New Information On Reusable Cylinder Liners{1216}
1978/06/19

Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28

New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04

New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11

Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02

Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27

Pin Bore Is Now Offset (Not In The Center) .059" (1.5 mm) In The Piston To Stop Vibration Of The Cylinder Liners Which Can Cause Pitting On The Coolant Side Of The Cylinder Liners {1214,1216}
1979/09/10

Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17

Use Only Stainless Steel Cylinder Liner Shims To Salvage Damaged 4.75" Bore Cylinder Blocks{1201,1216,1217}
1990/11/19

Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07

Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20

Be Sure To Use Correct Cup Plugs On 0R2077, 0R2554, And 0R3258 Remanufactured Short Blocks{1200,1201}
1992/11/23

Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18

Caterpillar Parts SIS Catalog 814B :

202-1257 CYLINDER BLOCK AS

4N-0741 CRANKSHAFT GP

430-2593 CRANKSHAFT AS

1W-6207 CRANKSHAFT AS

7W-7353 COVER GP-VALVE MECHANISM

463-3536 CYLINDER BLOCK AS

108-3916 CYLINDER BLOCK GP

152-7642 CYLINDER BLOCK GP

152-7644 CYLINDER BLOCK GP

152-7646 CYLINDER BLOCK GP

202-1258 CYLINDER BLOCK GP

7E-4697 CYLINDER BLOCK GP

Truck sale:

Call

1983 CAT 814B

BSR Worldwide Equipment LLC
Everett, Washington