376-7017 ENGINE AR-CORE S/N ELM1700-UP C18 GENERATOR SET

Part No	Qty	Parts name
278-5662 Y	[1]	BASE GP-VALVE COVER & INJ HARN
201-0566 Y	[1]	CAMSHAFT GP
189-4917 Y	[1]	CRANKSHAFT GP
261-0191 Y	[1]	CYLINDER BLOCK GP
244-6893 Y	[1]	CYLINDER HEAD GP
207-0449 Y	[1]	GEAR GP-FRONT
190-0009 Y	[1]	MECHANISM GP-FUEL PUMP & VALVE
283-7669 Y	[6]	PISTON & ROD GP
161-4113 Y	[1]	PUMP GP-ENGINE OIL
261-0048 Y	[6]	PUMP GP-FUEL INJECTION
280-8039 Y	[1]	PUMP GP-WATER
276-9769 Y	[1]	SENSOR GP-ENGINE
R		REMFG PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP53280011

296-7538: GENERAL AR-GENSET

GENERAL AR-GENSET

296-7538 GENERAL AR-GENSET
S/N CYL1-UP
60-HZ, LARNE BUILT

i03289360 SEBP5328

For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
	293-9764 Y	[1]	ENGINE AR-COMPLETE
	Y		SEPARATE ILLUSTRATION

#SEBP53280012

296-7539: GENERAL AR-GENSET

GENERAL AR-GENSET

296-7539 GENERAL AR-GENSET
S/N CYL1-UP
60-HZ, LARNE BUILT

i03289364 SEBP5328

For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
	293-9763 Y	[1]	ENGINE AR-COMPLETE
	Y		SEPARATE ILLUSTRATION

#SEBP53280013

329-2995: GENERAL AR-GENSET

GENERAL AR-GENSET

329-2995 GENERAL AR-GENSET
S/N NKK1-UP
AN ATTACHMENT

i03290143 SEBP5328

For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
	241-2422 Y	[1]	ENGINE AR-COMPLETE
	Y		SEPARATE ILLUSTRATION

#SEBP53280014

261-2215: MODIFICATION AR-ENGINE

MODIFICATION AR-ENGINE

261-2215 MODIFICATION AR-ENGINE
S/N CYL1-UP
AN ATTACHMENT

i02365965 SEBP5328

For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
			(NO SERVICED PARTS)

#SEBP53280015

133-9907: ADAPTER GP-PUMP DRIVE

ADAPTER GP-PUMP DRIVE

133-9907 ADAPTER GP-PUMP DRIVE
S/N STH5484-UP; ELL1-UP; ELM1-UP
PART OF 6I-3638 DRIVE GP-PUMP
ALSO AN ATTACHMENT

i00994571 SEBP5328

1339907 ADAPTER GP-PUMP DRIVE Parts scheme

For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1B-3867	[2]	BALL BEARING
2.	4F-7957	[3]	BOLT (1/4-20X0.875-IN)
3.	6I-4575	[1]	GEAR (34 TEETH)
4.	9X-2038	[3]	WASHER (7X19X2-MM THK)
5.	133-9906	[1]	ADAPTER
6.	1H-8647	[1]	RING-SNAP

#SEBP53280016

122-1248: BASE GP-VALVE COVER & INJ HARN

BASE GP-VALVE COVER & INJ HARN

122-1248 BASE GP-VALVE COVER & INJ HARN
S/N ELL1-UP

i00994567 SEBP5328

1221248 BASE GP-VALVE COVER & INJ HARN Parts scheme

For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-0128	[1]	SEAL-CONNECTOR
2.	7E-6508	[6]	CAP AS (UNIT INJECTOR)
3.	122-1472	[1]	BOLT (5/16-18X2.36-IN)
4.	343-7235	[1]	HARNESS AS-ENGINE (ELECTRONIC UNIT INJECTOR)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
	103-8134	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
	7E-6513	[6]	CONNECTOR AS
	8T-8729	[12]	PIN-CONNECTOR (16-GA TO 18-GA)
	066-8391	[6]	TERMINAL-BLADE (14-GA TO 18-GA)
5.	123-3202	[3]	STRAP-CABLE
6.	5P-5678 B		SEAL (3-M)
7.	289-8215 C	[1]	BASE-VALVE MECHANISM COVER
8.	326-4512	[6]	MOUNTING-CABLE TIE (MARKED BY X)
9.	4F-7957	[2]	BOLT (1/4-20X0.875-IN)
10.	5P-0537	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
11.	9L-8925	[14]	BOLT (5/16-18X1.25-IN)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE

#SEBP53280017

122-1248: BASE GP-VALVE COVER & INJ HARN

BASE GP-VALVE COVER & INJ HARN

122-1248 BASE GP-VALVE COVER & INJ HARN
S/N STH5484-UP
AN ATTACHMENT

i05957104 SEBP5328

For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-0128	[1]	SEAL-CONNECTOR
2.	7E-6508	[6]	CAP AS (UNIT INJECTOR)
3.	122-1472	[1]	BOLT (5/16-18X2.36-IN)
4.	425-6526 Y	[1]	HARNESS AS-ENGINE (ELECTRONIC UNIT INJECTOR)
5.	123-3202	[6]	STRAP-CABLE
6.	272-0390 C	[1]	SEAL
7.	419-3614 C	[1]	BASE-VALVE COVER
8.	326-4512	[6]	MOUNTING-CABLE TIE (MARKED BY X)
9.	4F-7957	[2]	BOLT (1/4-20X0.875-IN)
10.	5P-0537	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
11.	9L-8925	[14]	BOLT (5/16-18X1.25-IN)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP53280018

278-5662: BASE GP-VALVE COVER & INJ HARN

BASE GP-VALVE COVER & INJ HARN

278-5662 BASE GP-VALVE COVER & INJ HARN
S/N ELL1-UP; ELM1-UP

i02680540 SEBP5328

2785662 BASE GP-VALVE COVER & INJ HARN Parts scheme

For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	123-3202	[6]	STRAP-CABLE
2.	6V-0128	[1]	SEAL-CONNECTOR
3.	7E-6508	[6]	CAP AS
4.	9L-8925	[14]	BOLT (5/16-18X1.25-IN)
5.	122-1472	[1]	BOLT (5/16-18X2.36-IN)
6.	419-3614 C	[1]	BASE-VALVE COVER
7.	425-0289 Y	[1]	HARNESS AS-WIRING
8.	326-4512	[6]	MOUNTING-CABLE TIE
9.	272-0390 C	[1]	SEAL
10.	4F-7957	[2]	BOLT (1/4-20X0.875-IN)
11.	5P-0537	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP53280019

230-5530: BRACKET GP-SUPPORT

BRACKET GP-SUPPORT

230-5530 BRACKET GP-SUPPORT -FRONT HOUSING
S/N STH5484-UP
AN ATTACHMENT

i02162256 SEBP5328

For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	230-5529	[1]	BRACKET AS
2.	0S-1588	[3]	BOLT (3/8-16X1.25-IN)
3.	0S-1590	[2]	BOLT (3/8-16X2-IN)
4.	9X-6458	[5]	WASHER-HARD (10.2X22.5X3-MM THK)

Information:

ENGINE ARRANGEMENT

ENGINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/18

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

Make Sure that the Generator Set Is Stored Properly {1021, 1404, 7002}
2009/06/01

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/23

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}

Special Instruction

Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}

Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}

Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}
Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}

Differences in Appearance of Cat <SUP>®</SUP> Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ^® Reman Parts when Compared to New Parts {1000, 1250}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Technical Information Bulletin

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Tool Operating Manual

NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}

Reuse And Salvage Guidelines

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}

Contamination Control Guidelines

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

Applied Failure Analysis

Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}

Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}

Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}

Information Release Memo

CAT REMAN ANNOUNCES ADDITION OF COMPLETE ENGINES FOR C18 APPLICATIONS
CAT REMAN ANNOUNCES ADDITION OF COMPLETE ENGINES FOR C18 APPLICATIONS

APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS

Disassembly and Assembly

Engine - Remove
C15 and C18 Generator Set Engines

Engine - Install
C15 and C18 Generator Set Engines

Service Magazine

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog C18 :

362-4775 ENGINE AR-CORE

293-9766 ENGINE AR-CORE

293-9765 ENGINE AR-CORE

243-2397 ENGINE AR-CORE

293-9764 ENGINE AR-COMPLETE

293-9763 ENGINE AR-COMPLETE

241-2422 ENGINE AR-COMPLETE

364-5470 ENGINE AR

296-7538 GENERAL AR-GENSET

296-7539 GENERAL AR-GENSET

329-2995 GENERAL AR-GENSET

261-2215 MODIFICATION AR-ENGINE

133-9907 ADAPTER GP-PUMP DRIVE

122-1248 BASE GP-VALVE COVER & INJ HARN

278-5662 BASE GP-VALVE COVER & INJ HARN

Truck sale:

89,000 USD

Caterpillar C18, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC

34,700

Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates

34,800

Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates

32,850

Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates

36,800

Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates