AIR INLET AND EXHAUST SYSTEM
EXHAUST GPAIR INLET AND EXHAUST SYSTEM
EXHAUST GP
#SEBP53370960
280-2831: LINES GP-CLEAN GAS INDUCTION
280-2831 LINES GP-CLEAN GAS INDUCTION
S/N LEE1-UP
PROVIDES A LINES GP-AIR TO CARRY CGI GAS FROM COOLER TO INDUCTION DEVICE
FOR USE WITH MID-MOUNT MANIFOLD GP-EXHAUST
AN ATTACHMENT
S/N LEE1-UP
PROVIDES A LINES GP-AIR TO CARRY CGI GAS FROM COOLER TO INDUCTION DEVICE
FOR USE WITH MID-MOUNT MANIFOLD GP-EXHAUST
AN ATTACHMENT
For full view, you need register
Parts for your C13 TRUCK ENGINE:
CATERPILLAR SIS#SEBP53370961
280-2833: LINES GP-CLEAN GAS INDUCTION
280-2833 LINES GP-CLEAN GAS INDUCTION
S/N LEE1-UP
PROVIDES A LINES GP-AIR TO CARRY CGI GAS FROM COOLER TO INDUCTION DEVICE
FOR USE WITH LOW MOUNT MANIFOLD GP-EXHAUST
AN ATTACHMENT
S/N LEE1-UP
PROVIDES A LINES GP-AIR TO CARRY CGI GAS FROM COOLER TO INDUCTION DEVICE
FOR USE WITH LOW MOUNT MANIFOLD GP-EXHAUST
AN ATTACHMENT
For full view, you need register
Parts for your C13 TRUCK ENGINE:
CATERPILLAR SIS#SEBP53370962
280-6954: LINES GP-CLEAN GAS INDUCTION
280-6954 LINES GP-CLEAN GAS INDUCTION
S/N LEE1-UP
PROVIDES AN OVER THE FLYWHEEL HOUSING OEM CGI CONNECTING POINT
FOR USE WITH @@@@@273-3530@@@@@, HORIZONTAL VENTURI
AN ATTACHMENT
S/N LEE1-UP
PROVIDES AN OVER THE FLYWHEEL HOUSING OEM CGI CONNECTING POINT
FOR USE WITH @@@@@273-3530@@@@@, HORIZONTAL VENTURI
AN ATTACHMENT
For full view, you need register
Parts for your C13 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [5] | STRAP-CABLE | |
| 2. | 233-8004 | [1] | JOINT-EXPANSION | |
| 3. | 239-6807 | [1] | CLAMP AS (V-BAND) | |
| 4. | 280-1134 | [1] | ELBOW AS (VENTURI) | |
| 5. | 280-6950 Y | [1] | ELBOW GP-EXHAUST | |
| 6. | 241-2634 | [2] | CLAMP AS (V-BAND) | |
| 7. | 2N-1287 | [2] | ELBOW-FLARED | |
| 8. | 4P-7581 | [1] | CLIP | |
| 9. | 4P-8134 | [3] | CLIP | |
| 10. | 5P-8347 M | [3] | BOLT (M8X1.25X70-MM) | |
| 11. | 9M-1974 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 12. | 284-1491 E | SLEEVE (128-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP53370963
280-6956: LINES GP-CLEAN GAS INDUCTION
280-6956 LINES GP-CLEAN GAS INDUCTION
S/N LEE1-UP
PROVIDES AN OEM CGI CONNECTING POINT ORIENTED 90-DEGREES DOWN FROM THE CGI COOLER INLET
FOR USE WITH VERTICAL VENTURI
AN ATTACHMENT
S/N LEE1-UP
PROVIDES AN OEM CGI CONNECTING POINT ORIENTED 90-DEGREES DOWN FROM THE CGI COOLER INLET
FOR USE WITH VERTICAL VENTURI
AN ATTACHMENT
For full view, you need register
Parts for your C13 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [5] | STRAP-CABLE | |
| 2. | 233-8004 | [1] | JOINT-EXPANSION | |
| 3. | 239-6807 | [1] | CLAMP AS (V-BAND) | |
| 4. | 280-1136 | [1] | ELBOW AS (VENTURI) | |
| 5. | 280-6952 Y | [1] | ELBOW GP-EXHAUST | |
| 6. | 241-2634 | [2] | CLAMP AS (V-BAND) | |
| 7. | 2N-1287 | [2] | ELBOW-FLARED | |
| 8. | 4P-7581 | [1] | CLIP | |
| 9. | 4P-8134 | [3] | CLIP | |
| 10. | 6V-5219 M | [3] | BOLT (M8X1.25X40-MM) | |
| 11. | 9M-1974 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 12. | 284-1491 E | SLEEVE (128-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP53370964
284-1097: LINES GP-CLEAN GAS INDUCTION
284-1097 LINES GP-CLEAN GAS INDUCTION -CGI HYDRAULIC ACTUATOR
S/N LEE1-546
PROVIDES A LOW MOUNT OIL LINES GROUP FOR THE ROTARY HYDRAULIC ACTUATOR
FOR USE WITH ENGINES REQUIRING THE LOW MOUNT TURBO CONFIGURATION
AN ATTACHMENT
S/N LEE1-546
PROVIDES A LOW MOUNT OIL LINES GROUP FOR THE ROTARY HYDRAULIC ACTUATOR
FOR USE WITH ENGINES REQUIRING THE LOW MOUNT TURBO CONFIGURATION
AN ATTACHMENT
For full view, you need register
Parts for your C13 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 280-2738 Y | [1] | FITTING GP-HYDRAULIC (ACTUATOR) | |
| 2. | 284-1095 | [1] | TUBE AS-INLET | |
| 3. | 284-1096 | [1] | TUBE AS-OUTLET | |
| 4. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 5. | 6V-7357 M | [1] | BOLT (M6X1X25-MM) | |
| 6. | 7E-2707 | [2] | CLIP | |
| 7. | 9X-8267 | [1] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP53370965
284-1097: LINES GP-CLEAN GAS INDUCTION
284-1097 LINES GP-CLEAN GAS INDUCTION -CGI HYDRAULIC ACTUATOR
S/N LEE547-UP
PROVIDES A LOW MOUNT OIL LINES GROUP FOR THE ROTARY HYDRAULIC ACTUATOR
FOR USE WITH ENGINES REQUIRING THE LOW MOUNT TURBO CONFIGURATION
AN ATTACHMENT
S/N LEE547-UP
PROVIDES A LOW MOUNT OIL LINES GROUP FOR THE ROTARY HYDRAULIC ACTUATOR
FOR USE WITH ENGINES REQUIRING THE LOW MOUNT TURBO CONFIGURATION
AN ATTACHMENT
For full view, you need register
Parts for your C13 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 280-2738 Y | [1] | FITTING GP-HYDRAULIC (ACTUATOR) | |
| 2. | 286-3678 C | [1] | HOSE AS | |
| 3. | 284-1096 | [1] | TUBE AS-OUTLET | |
| 4. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 5. | 6V-7357 M | [1] | BOLT (M6X1X25-MM) | |
| 6. | 7E-2707 | [2] | CLIP | |
| 7. | 9X-8267 | [1] | WASHER (6.6X12X2-MM THK) | |
| 8. | 7K-4129 C | [1] | UNION-FLARED | |
| 9. | 286-5235 C | [1] | TUBE AS-INLET | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP53370966
286-9391: LINES GP-CLEAN GAS INDUCTION
286-9391 LINES GP-CLEAN GAS INDUCTION
S/N LEE1-843
PROVIDES A LOW MOUNT OIL LINES GP FOR THE CGI HYDRAULIC ACTUATOR
FOR USE WITH ENGINES REQUIRING THE LOW MOUNT TURBO CONFIGURATION
AN ATTACHMENT
S/N LEE1-843
PROVIDES A LOW MOUNT OIL LINES GP FOR THE CGI HYDRAULIC ACTUATOR
FOR USE WITH ENGINES REQUIRING THE LOW MOUNT TURBO CONFIGURATION
AN ATTACHMENT
For full view, you need register
Parts for your C13 TRUCK ENGINE:
CATERPILLAR SIS#SEBP53370967
286-9391: LINES GP-CLEAN GAS INDUCTION
286-9391 LINES GP-CLEAN GAS INDUCTION
S/N LEE844-2509
PROVIDES A LOW MOUNT OIL LINES GP FOR THE CGI HYDRAULIC ACTUATOR
FOR USE WITH ENGINES REQUIRING THE LOW MOUNT TURBO CONFIGURATION
AN ATTACHMENT
S/N LEE844-2509
PROVIDES A LOW MOUNT OIL LINES GP FOR THE CGI HYDRAULIC ACTUATOR
FOR USE WITH ENGINES REQUIRING THE LOW MOUNT TURBO CONFIGURATION
AN ATTACHMENT
For full view, you need register
Parts for your C13 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 274-9374 C | [1] | GASKET | |
| 2. | 299-5594 C | [1] | TUBE AS | |
| 3. | 299-5600 C | [1] | TUBE AS | |
| 4. | 6V-5217 CM | [1] | BOLT (M8X1.25X20-MM) | |
| 5. | 6V-8490 CM | [2] | BOLT (M6X1X25-MM) | |
| 6. | 7E-2707 C | [2] | CLIP | |
| 7. | 9M-1974 C | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 8. | 9X-7381 C | [2] | SEAL-O-RING | |
| 9. | 9X-8267 C | [2] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP53370968
286-9391: LINES GP-CLEAN GAS INDUCTION
286-9391 LINES GP-CLEAN GAS INDUCTION
S/N LEE2510-UP
PROVIDES A LOW MOUNT OIL LINES GP FOR THE CGI HYDRAULIC ACTUATOR
FOR USE WITH ENGINES REQUIRING THE LOW MOUNT TURBO CONFIGURATION
AN ATTACHMENT
S/N LEE2510-UP
PROVIDES A LOW MOUNT OIL LINES GP FOR THE CGI HYDRAULIC ACTUATOR
FOR USE WITH ENGINES REQUIRING THE LOW MOUNT TURBO CONFIGURATION
AN ATTACHMENT
For full view, you need register
Parts for your C13 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 274-9374 | [1] | GASKET | |
| 2. | 304-8404 C | [1] | TUBE AS | |
| 3. | 304-8410 C | [1] | TUBE AS | |
| 4. | 6V-5217 M | [1] | BOLT (M8X1.25X20-MM) | |
| 5. | 6V-8490 CM | [1] | BOLT (M6X1X25-MM) | |
| 6. | 7E-2707 C | [2] | CLIP | |
| 7. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 8. | 9X-7381 | [2] | SEAL-O-RING | |
| 9. | 9X-8267 C | [1] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP53370969
286-9392: LINES GP-CLEAN GAS INDUCTION
286-9392 LINES GP-CLEAN GAS INDUCTION
S/N LEE1-843
PROVIDES A MID MOUNT OIL LINES GP FOR THE CGI HYDRAULIC ACTUATOR.
FOR USE WITH ENGINES REQUIRING THE MID MOUNT TURBO CONFIGURATION.
AN ATTACHMENT
S/N LEE1-843
PROVIDES A MID MOUNT OIL LINES GP FOR THE CGI HYDRAULIC ACTUATOR.
FOR USE WITH ENGINES REQUIRING THE MID MOUNT TURBO CONFIGURATION.
AN ATTACHMENT
For full view, you need register
Parts for your C13 TRUCK ENGINE:
CATERPILLAR SISInformation:
AIR INLET AND EXHAUST SYSTEM
EXHAUST GP
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT ENGINE ACCESSORY DEVICE ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT ENGINE ACCESSORY DEVICE ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT ENGINE ACCESSORY DEVICE ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CLEAN GAS INDUCTION VENTURI MASS AIR FLOW SENSOR AND THE CRANKCASE VENTILATION SYSTEM ON CERTAIN C13 AND C15 ON-HIGHWAY TRUCK ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CLEAN GAS INDUCTION VENTURI MASS AIR FLOW SENSOR AND THE CRANKCASE VENTILATION SYSTEM ON CERTAIN C13 AND C15 ON-HIGHWAY TRUCK ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CLEAN GAS INDUCTION VENTURI MASS AIR FLOW SENSOR AND THE CRANKCASE VENTILATION SYSTEM ON CERTAIN C13 AND C15 ON-HIGHWAY TRUCK ENGINES.
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERTREATMENT REGENERATION DEVICE (ARD) COMBUSTION BODY GROUP BRACKET BOLTS ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERTREATMENT REGENERATION DEVICE (ARD) COMBUSTION BODY GROUP BRACKET BOLTS ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERTREATMENT REGENERATION DEVICE (ARD) COMBUSTION BODY GROUP BRACKET BOLTS ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT ENGINE ACCESSORY DEVICE ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT ENGINE ACCESSORY DEVICE ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT ENGINE ACCESSORY DEVICE ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERTREATMENT REGENERATION DEVICE (ARD) COMBUSTION BODY GROUP BRACKET BOLTS ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERTREATMENT REGENERATION DEVICE (ARD) COMBUSTION BODY GROUP BRACKET BOLTS ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERTREATMENT REGENERATION DEVICE (ARD) COMBUSTION BODY GROUP BRACKET BOLTS ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
Service Letter-Americas
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CLEAN GAS INDUCTION VENTURI MASS AIR FLOW SENSOR AND THE CRANKCASE VENTILATION SYSTEM ON CERTAIN C13 AND C15 ON-HIGHWAY TRUCK ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CLEAN GAS INDUCTION VENTURI MASS AIR FLOW SENSOR AND THE CRANKCASE VENTILATION SYSTEM ON CERTAIN C13 AND C15 ON-HIGHWAY TRUCK ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CLEAN GAS INDUCTION VENTURI MASS AIR FLOW SENSOR AND THE CRANKCASE VENTILATION SYSTEM ON CERTAIN C13 AND C15 ON-HIGHWAY TRUCK ENGINES.
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERTREATMENT REGENERATION DEVICE (ARD) COMBUSTION BODY GROUP BRACKET BOLTS ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERTREATMENT REGENERATION DEVICE (ARD) COMBUSTION BODY GROUP BRACKET BOLTS ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERTREATMENT REGENERATION DEVICE (ARD) COMBUSTION BODY GROUP BRACKET BOLTS ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
Service Letter-Truck/Ag/Marine
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT ENGINE ACCESSORY DEVICE ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT ENGINE ACCESSORY DEVICE ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT ENGINE ACCESSORY DEVICE ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CLEAN GAS INDUCTION VENTURI MASS AIR FLOW SENSOR AND THE CRANKCASE VENTILATION SYSTEM ON CERTAIN C13 AND C15 ON-HIGHWAY TRUCK ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CLEAN GAS INDUCTION VENTURI MASS AIR FLOW SENSOR AND THE CRANKCASE VENTILATION SYSTEM ON CERTAIN C13 AND C15 ON-HIGHWAY TRUCK ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CLEAN GAS INDUCTION VENTURI MASS AIR FLOW SENSOR AND THE CRANKCASE VENTILATION SYSTEM ON CERTAIN C13 AND C15 ON-HIGHWAY TRUCK ENGINES.
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERTREATMENT REGENERATION DEVICE (ARD) COMBUSTION BODY GROUP BRACKET BOLTS ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERTREATMENT REGENERATION DEVICE (ARD) COMBUSTION BODY GROUP BRACKET BOLTS ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERTREATMENT REGENERATION DEVICE (ARD) COMBUSTION BODY GROUP BRACKET BOLTS ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
Service Letter-China
Service Letter-Asia
Service Letter-APD
Caterpillar Parts SIS Catalog C13 :
Truck sale:
CATERPILLAR C13 2014
- STATIONARY GENERATOR SETS
PANTROPIC POWER
8205 N.W. 58th Street - Miami - Florid
- STATIONARY GENERATOR SETS
PANTROPIC POWER
8205 N.W. 58th Street - Miami - Florid