AIR INLET AND EXHAUST SYSTEM
EXHAUST GPAIR INLET AND EXHAUST SYSTEM
EXHAUST GP
#SEBP53370970
286-9392: LINES GP-CLEAN GAS INDUCTION
286-9392 LINES GP-CLEAN GAS INDUCTION
S/N LEE844-2509
PROVIDES A MID MOUNT OIL LINES GP FOR THE CGI HYDRAULIC ACTUATOR.
FOR USE WITH ENGINES REQUIRING THE MID MOUNT TURBO CONFIGURATION.
AN ATTACHMENT
S/N LEE844-2509
PROVIDES A MID MOUNT OIL LINES GP FOR THE CGI HYDRAULIC ACTUATOR.
FOR USE WITH ENGINES REQUIRING THE MID MOUNT TURBO CONFIGURATION.
AN ATTACHMENT
For full view, you need register
Parts for your C13 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 274-9374 C | [1] | GASKET | |
| 2. | 299-5593 C | [1] | TUBE AS | |
| 3. | 299-5599 C | [1] | TUBE AS | |
| 4. | 6V-5217 CM | [1] | BOLT (M8X1.25X20-MM) | |
| 5. | 6V-8490 CM | [2] | BOLT (M6X1X25-MM) | |
| 6. | 7E-2707 C | [2] | CLIP | |
| 7. | 9M-1974 C | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 8. | 9X-7381 C | [2] | SEAL-O-RING | |
| 9. | 9X-8256 C | [1] | WASHER (6.6X12X2-MM THK) | |
| 10. | 9X-8267 C | [1] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP53370971
286-9392: LINES GP-CLEAN GAS INDUCTION
286-9392 LINES GP-CLEAN GAS INDUCTION
S/N LEE2510-UP
PROVIDES A MID MOUNT OIL LINES GP FOR THE CGI HYDRAULIC ACTUATOR.
FOR USE WITH ENGINES REQUIRING THE MID MOUNT TURBO CONFIGURATION.
AN ATTACHMENT
S/N LEE2510-UP
PROVIDES A MID MOUNT OIL LINES GP FOR THE CGI HYDRAULIC ACTUATOR.
FOR USE WITH ENGINES REQUIRING THE MID MOUNT TURBO CONFIGURATION.
AN ATTACHMENT
For full view, you need register
Parts for your C13 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 274-9374 | [1] | GASKET | |
| 2. | 304-8403 C | [1] | TUBE AS | |
| 3. | 304-8409 C | [1] | TUBE AS | |
| 4. | 5C-2890 CM | [1] | NUT (M6X1-THD) | |
| 5. | 6V-5217 M | [1] | BOLT (M8X1.25X20-MM) | |
| 6. | 6V-8490 M | [2] | BOLT (M6X1X25-MM) | |
| 7. | 7E-2707 C | [4] | CLIP | |
| 8. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 9X-7381 | [2] | SEAL-O-RING | |
| 10. | 9X-8267 C | [3] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP53370972
286-9393: LINES GP-CLEAN GAS INDUCTION
286-9393 LINES GP-CLEAN GAS INDUCTION
S/N LEE1-843
PROVIDES A HIGH MOUNT OIL LINES GP FOR THE CGI HYDRAULIC ACTUATOR
FOR USE WITH ENGINES REQUIRING THE HIGH MOUNT TURBO CONFIGURATION
AN ATTACHMENT
S/N LEE1-843
PROVIDES A HIGH MOUNT OIL LINES GP FOR THE CGI HYDRAULIC ACTUATOR
FOR USE WITH ENGINES REQUIRING THE HIGH MOUNT TURBO CONFIGURATION
AN ATTACHMENT
For full view, you need register
Parts for your C13 TRUCK ENGINE:
CATERPILLAR SIS#SEBP53370973
286-9393: LINES GP-CLEAN GAS INDUCTION
286-9393 LINES GP-CLEAN GAS INDUCTION
S/N LEE1-1168
PROVIDES A HIGH MOUNT OIL LINES GP FOR THE CGI HYDRAULIC ACTUATOR
FOR USE WITH ENGINES REQUIRING THE HIGH MOUNT TURBO CONFIGURATION
AN ATTACHMENT
S/N LEE1-1168
PROVIDES A HIGH MOUNT OIL LINES GP FOR THE CGI HYDRAULIC ACTUATOR
FOR USE WITH ENGINES REQUIRING THE HIGH MOUNT TURBO CONFIGURATION
AN ATTACHMENT
For full view, you need register
Parts for your C13 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 274-9374 C | [1] | GASKET | |
| 2. | 299-5592 C | [1] | TUBE AS | |
| 3. | 299-5598 C | [1] | TUBE AS | |
| 4. | 6V-5217 CM | [1] | BOLT (M8X1.25X20-MM) | |
| 5. | 6V-8490 CM | [2] | BOLT (M6X1X25-MM) | |
| 6. | 7E-2707 C | [2] | CLIP | |
| 7. | 9M-1974 C | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 8. | 9X-7381 C | [2] | SEAL-O-RING | |
| 9. | 9X-8267 C | [2] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP53370974
286-9393: LINES GP-CLEAN GAS INDUCTION
286-9393 LINES GP-CLEAN GAS INDUCTION
S/N LEE1169-UP
PROVIDES A HIGH MOUNT OIL LINES GP FOR THE CGI HYDRAULIC ACTUATOR
FOR USE WITH ENGINES REQUIRING THE HIGH MOUNT TURBO CONFIGURATION
AN ATTACHMENT
S/N LEE1169-UP
PROVIDES A HIGH MOUNT OIL LINES GP FOR THE CGI HYDRAULIC ACTUATOR
FOR USE WITH ENGINES REQUIRING THE HIGH MOUNT TURBO CONFIGURATION
AN ATTACHMENT
For full view, you need register
Parts for your C13 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 274-9374 | [1] | GASKET | |
| 2. | 304-8402 C | [1] | TUBE AS (OIL SUPPLY) | |
| 3. | 304-8408 C | [1] | TUBE AS (RETURN OIL) | |
| 4. | 5C-2890 CM | [1] | NUT (M6X1-THD) | |
| 5. | 6V-5217 M | [1] | BOLT (M8X1.25X20-MM) | |
| 6. | 6V-8490 M | [2] | BOLT (M6X1X25-MM) | |
| 7. | 7E-2707 C | [4] | CLIP | |
| 8. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 9X-7381 | [2] | SEAL-O-RING | |
| 10. | 9X-8267 C | [4] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP53370975
286-9426: LINES GP-CLEAN GAS INDUCTION
286-9426 LINES GP-CLEAN GAS INDUCTION -CGI HYDRAULIC ACTUATOR
S/N LEE1-2509
PROVIDES A MID MOUNT OIL LINES GP FOR THE CGI HYDRAULIC ACTUATOR.
FOR USE WITH ENGINES USING THE MID MOUNT TURBO CONFIGURATION.
AN ATTACHMENT
S/N LEE1-2509
PROVIDES A MID MOUNT OIL LINES GP FOR THE CGI HYDRAULIC ACTUATOR.
FOR USE WITH ENGINES USING THE MID MOUNT TURBO CONFIGURATION.
AN ATTACHMENT
For full view, you need register
Parts for your C13 TRUCK ENGINE:
CATERPILLAR SIS#SEBP53370976
286-9426: LINES GP-CLEAN GAS INDUCTION
286-9426 LINES GP-CLEAN GAS INDUCTION -CGI HYDRAULIC ACTUATOR
S/N LEE2510-UP
PROVIDES A MID MOUNT OIL LINES GP FOR THE CGI HYDRAULIC ACTUATOR.
FOR USE WITH ENGINES USING THE MID MOUNT TURBO CONFIGURATION.
AN ATTACHMENT
S/N LEE2510-UP
PROVIDES A MID MOUNT OIL LINES GP FOR THE CGI HYDRAULIC ACTUATOR.
FOR USE WITH ENGINES USING THE MID MOUNT TURBO CONFIGURATION.
AN ATTACHMENT
For full view, you need register
Parts for your C13 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 274-9374 C | [1] | GASKET | |
| 2. | 304-8407 C | [1] | TUBE AS-SUPPLY | |
| 3. | 304-8413 C | [1] | TUBE AS-RETURN | |
| 4. | 5C-2890 CM | [2] | NUT (M6X1-THD) | |
| 5. | 6V-5217 CM | [1] | BOLT (M8X1.25X20-MM) | |
| 6. | 6V-8490 CM | [3] | BOLT (M6X1X25-MM) | |
| 7. | 7E-2707 C | [5] | CLIP | |
| 8. | 9M-1974 C | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 9X-7381 C | [2] | SEAL-O-RING | |
| 10. | 9X-8267 C | [5] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP53370977
288-1253: LINES GP-CLEAN GAS INDUCTION
288-1253 LINES GP-CLEAN GAS INDUCTION
S/N LEE1-UP
PROVIDES LINES GP-AIR TO CARRY GAS FROM COOLER TO INDUCTION DEVICE
FOR USE WITH HIGH MOUNT MANIFOLD GP-EXH
AN ATTACHMENT
S/N LEE1-UP
PROVIDES LINES GP-AIR TO CARRY GAS FROM COOLER TO INDUCTION DEVICE
FOR USE WITH HIGH MOUNT MANIFOLD GP-EXH
AN ATTACHMENT
For full view, you need register
Parts for your C13 TRUCK ENGINE:
CATERPILLAR SIS#SEBP53370978
288-1255: LINES GP-CLEAN GAS INDUCTION
288-1255 LINES GP-CLEAN GAS INDUCTION
S/N LEE1-UP
PROVIDES LINES GP-AIR TO CARRY CGI GAS FROM COOLER TO INDUCTION DEVICE
FOR USE WITH MID MOUNT EXHAUST MANIFOLD GP
AN ATTACHMENT
S/N LEE1-UP
PROVIDES LINES GP-AIR TO CARRY CGI GAS FROM COOLER TO INDUCTION DEVICE
FOR USE WITH MID MOUNT EXHAUST MANIFOLD GP
AN ATTACHMENT
For full view, you need register
Parts for your C13 TRUCK ENGINE:
CATERPILLAR SIS#SEBP53370979
288-1257: LINES GP-CLEAN GAS INDUCTION
288-1257 LINES GP-CLEAN GAS INDUCTION
S/N LEE1-UP
PROVIDES LINES GP-AIR TO CARRY CGI GAS FROM COOLER TO INDUCTION DEVICE
FOR USE WITH LOW MOUNT MANIFOLD GP-EXHAUST
AN ATTACHMENT
S/N LEE1-UP
PROVIDES LINES GP-AIR TO CARRY CGI GAS FROM COOLER TO INDUCTION DEVICE
FOR USE WITH LOW MOUNT MANIFOLD GP-EXHAUST
AN ATTACHMENT
For full view, you need register
Parts for your C13 TRUCK ENGINE:
CATERPILLAR SISInformation:
AIR INLET AND EXHAUST SYSTEM
EXHAUST GP
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT ENGINE ACCESSORY DEVICE ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT ENGINE ACCESSORY DEVICE ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT ENGINE ACCESSORY DEVICE ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CLEAN GAS INDUCTION VENTURI MASS AIR FLOW SENSOR AND THE CRANKCASE VENTILATION SYSTEM ON CERTAIN C13 AND C15 ON-HIGHWAY TRUCK ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CLEAN GAS INDUCTION VENTURI MASS AIR FLOW SENSOR AND THE CRANKCASE VENTILATION SYSTEM ON CERTAIN C13 AND C15 ON-HIGHWAY TRUCK ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CLEAN GAS INDUCTION VENTURI MASS AIR FLOW SENSOR AND THE CRANKCASE VENTILATION SYSTEM ON CERTAIN C13 AND C15 ON-HIGHWAY TRUCK ENGINES.
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERTREATMENT REGENERATION DEVICE (ARD) COMBUSTION BODY GROUP BRACKET BOLTS ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERTREATMENT REGENERATION DEVICE (ARD) COMBUSTION BODY GROUP BRACKET BOLTS ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERTREATMENT REGENERATION DEVICE (ARD) COMBUSTION BODY GROUP BRACKET BOLTS ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT ENGINE ACCESSORY DEVICE ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT ENGINE ACCESSORY DEVICE ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT ENGINE ACCESSORY DEVICE ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERTREATMENT REGENERATION DEVICE (ARD) COMBUSTION BODY GROUP BRACKET BOLTS ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERTREATMENT REGENERATION DEVICE (ARD) COMBUSTION BODY GROUP BRACKET BOLTS ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERTREATMENT REGENERATION DEVICE (ARD) COMBUSTION BODY GROUP BRACKET BOLTS ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
Service Letter-Americas
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CLEAN GAS INDUCTION VENTURI MASS AIR FLOW SENSOR AND THE CRANKCASE VENTILATION SYSTEM ON CERTAIN C13 AND C15 ON-HIGHWAY TRUCK ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CLEAN GAS INDUCTION VENTURI MASS AIR FLOW SENSOR AND THE CRANKCASE VENTILATION SYSTEM ON CERTAIN C13 AND C15 ON-HIGHWAY TRUCK ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CLEAN GAS INDUCTION VENTURI MASS AIR FLOW SENSOR AND THE CRANKCASE VENTILATION SYSTEM ON CERTAIN C13 AND C15 ON-HIGHWAY TRUCK ENGINES.
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERTREATMENT REGENERATION DEVICE (ARD) COMBUSTION BODY GROUP BRACKET BOLTS ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERTREATMENT REGENERATION DEVICE (ARD) COMBUSTION BODY GROUP BRACKET BOLTS ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERTREATMENT REGENERATION DEVICE (ARD) COMBUSTION BODY GROUP BRACKET BOLTS ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
Service Letter-Truck/Ag/Marine
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT ENGINE ACCESSORY DEVICE ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT ENGINE ACCESSORY DEVICE ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT ENGINE ACCESSORY DEVICE ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CLEAN GAS INDUCTION VENTURI MASS AIR FLOW SENSOR AND THE CRANKCASE VENTILATION SYSTEM ON CERTAIN C13 AND C15 ON-HIGHWAY TRUCK ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CLEAN GAS INDUCTION VENTURI MASS AIR FLOW SENSOR AND THE CRANKCASE VENTILATION SYSTEM ON CERTAIN C13 AND C15 ON-HIGHWAY TRUCK ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CLEAN GAS INDUCTION VENTURI MASS AIR FLOW SENSOR AND THE CRANKCASE VENTILATION SYSTEM ON CERTAIN C13 AND C15 ON-HIGHWAY TRUCK ENGINES.
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERTREATMENT REGENERATION DEVICE (ARD) COMBUSTION BODY GROUP BRACKET BOLTS ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERTREATMENT REGENERATION DEVICE (ARD) COMBUSTION BODY GROUP BRACKET BOLTS ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE AFTERTREATMENT REGENERATION DEVICE (ARD) COMBUSTION BODY GROUP BRACKET BOLTS ON CERTAIN C13 ON-HIGHWAY TRUCK ENGINES
Service Letter-China
Service Letter-Asia
Service Letter-APD
Caterpillar Parts SIS Catalog C13 :
Truck sale:
CATERPILLAR C13 2014
- STATIONARY GENERATOR SETS
PANTROPIC POWER
8205 N.W. 58th Street - Miami - Florid
- STATIONARY GENERATOR SETS
PANTROPIC POWER
8205 N.W. 58th Street - Miami - Florid