391-0233 ENGINE AR S/N JSC24385-UP; REH5418-UP C9 INDUSTRIAL ENGINE

Part No	Qty	Parts name
393-0592 Y	[1]	ENGINE AR-CORE
Y	[1]	PLATE & FILM GP
		S/N REH1-1403
Y	[1]	PLATE & FILM GP
		S/N REH1404-7991
Y	[1]	PLATE & FILM GP
		S/N REH7992-UP

367-9415	[1]	ELECTRONICS GP-ENGINE RATINGS

		PLEASE USE THE GASKET KIT LINK IN SIS OR CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET KIT INFORMATION
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP53400004

394-9222: ENGINE AR

ENGINE AR

394-9222 ENGINE AR
S/N JSC1-UP

i06683142 SEBP5340

For full view, you need register

Parts for your C9 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
391-4563 Y	[1]	ENGINE AR-CORE
Y	[1]	PLATE & FILM GP
		-OR-
Y	[1]	PLATE & FILM GP
		-OR-
Y	[1]	PLATE & FILM GP
367-9417	[1]	ELECTRONICS GP-ENGINE RATINGS
Y		SEPARATE ILLUSTRATION

#SEBP53400005

342-6056: ENGINE AR-COMPLETE

ENGINE AR-COMPLETE

342-6056 ENGINE AR-COMPLETE
S/N JSC10008-UP; REH5418-UP
206 BRAKE KW (275 BHP) AT 2200 RPM
FIELD INSTALLATION

i05750573 SEBP5340

For full view, you need register

Parts for your C9 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
241-7597 Y	[1]	CONTROL & MTG GP-ENGINE ELEK
188-3826 Y	[1]	COOLER GP-ENGINE OIL
183-3649 Y	[1]	COVER GP-CYLINDER BLOCK
127-5728 Y	[1]	COVER GP-FLYWHEEL HOUSING (FRONT, RH)
133-1209 Y	[1]	COVER GP-FLYWHEEL HOUSING (FRONT, LH)
217-8669 Y	[1]	COVER GP-FRONT HOUSING
247-5716 Y	[1]	COVER GP-FRONT HOUSING
235-8174 Y	[1]	COVER GP-VALVE MECHANISM
256-9751 Y	[1]	DAMPER & PULLEY GP
198-6477 Y	[1]	DRAIN GP-ENGINE OIL
215-3816 Y	[1]	DRIVE GP-ACCESSORY
256-6166 Y	[1]	DRIVE GP-WATER PUMP
165-4464 Y	[1]	ELBOW GP-AIR INLET
200-1215 Y	[1]	ELBOW GP-WATER (INLET)
342-9861 Y	[1]	ENGINE AR-CORE
		S/N JSC10008-24384
391-0233 Y	[1]	ENGINE AR
		S/N JSC24385-UP
256-9753 Y	[1]	FASTENER GP-DAMPER & PULLEY
166-1788 Y	[1]	FASTENER GP-FRONT HOUSING (FRONT COVER)
117-3477 Y	[1]	FASTENER GP-LIFTING
239-3311 Y	[1]	FASTENER GP-VALVE COVER
233-0423 Y	[1]	FASTENER GP-VALVE COVER BASE
257-7268 Y	[1]	FASTENER GP-WIRING HARNESS
201-9778 Y	[1]	FILTER GP-ENGINE OIL
201-8144 Y	[1]	FILTER GP-FUEL
187-3077 Y	[1]	FUMES DISPOSAL GP
201-9773 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK) (ENGINE)
189-9374 Y	[1]	HOUSING GP-FLYWHEEL
209-0758 Y	[1]	HOUSING GP-FRONT
169-3113 Y	[1]	LIFTING GP-ENGINE
217-4624 Y	[1]	LIFTING GP-ENGINE
192-2832 Y	[1]	LINES GP-ENGINE OIL
260-6882 Y	[1]	LINES GP-FUEL FILTER
221-5421 Y	[1]	LINES GP-TURBOCHARGER OIL
220-2765 Y	[1]	LINES GP-WATER
171-4687 Y	[1]	MANIFOLD GP-EXHAUST
198-6368 Y	[1]	PAN GP-OIL
215-7708 Y	[1]	PLUG GP-ENGINE
201-9779 Y	[1]	PLUG GP-FUEL FILTER BASE
205-4013 Y	[1]	PLUG GP-WATER LINES
172-6291 Y	[1]	PUMP GP-FUEL PRIMING
260-1546 Y	[1]	PUMP GP-WATER
		S/N JSC10008-24384
187-6508 Y	[1]	SEAL GP-CRANKSHAFT
260-6885 Y	[1]	SENSOR GP-ENGINE (ELECTRONIC CONTROL)
		S/N JSC10008-24384
118-7284 Y	[1]	STARTING AID GP (HEATER)(AIR INLET HEATER)
209-2108 Y	[1]	STARTING AID GP (SWITCH, WIRING)
266-0772 Y	[1]	SUPPORT GP-ENGINE
256-1380 Y	[1]	TURBOCHARGER GP
419-8872 Y	[1]	WIRING GP-ELECTRONIC CONTROL

		PLEASE USE THE GASKET KIT LINK IN SIS OR CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET KIT INFORMATION
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP53400006

392-5471: ENGINE AR-COMPLETE

ENGINE AR-COMPLETE

392-5471 ENGINE AR-COMPLETE
S/N JSC1-UP; REH1-UP
AN ATTACHMENT

i05288020 SEBP5340

For full view, you need register

Parts for your C9 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
197-8820 Y	[1]	ALTERNATOR GP-CHARGING (24-VOLT, 95-AMPERE)
240-6054 Y	[1]	CONNECTION GP-ELECTRICAL
4W-9183 Y	[1]	CONNECTION GP-EXHAUST
241-7597 Y	[1]	CONTROL & MTG GP-ENGINE ELEK
188-3826 Y	[1]	COOLER GP-ENGINE OIL
		S/N REH785-UP
183-3649 Y	[1]	COVER GP-CYLINDER BLOCK
127-5728 Y	[1]	COVER GP-FLYWHEEL HOUSING
217-8669 Y	[1]	COVER GP-FRONT HOUSING
247-5716 Y	[1]	COVER GP-FRONT HOUSING
235-8174 Y	[1]	COVER GP-VALVE MECHANISM
256-9751 Y	[1]	DAMPER & PULLEY GP
198-6478 Y	[1]	DRAIN GP-ENGINE OIL
215-3816 Y	[1]	DRIVE GP-ACCESSORY
256-6166 Y	[1]	DRIVE GP-WATER PUMP
206-7400 Y	[1]	ELBOW GP-AIR INLET
200-1215 Y	[1]	ELBOW GP-WATER (INLET)
393-9132 Y	[1]	ENGINE AR
256-9757 Y	[1]	FASTENER GP-DAMPER & PULLEY
155-4313 Y	[1]	FASTENER GP-FLYWHEEL
166-1788 Y	[1]	FASTENER GP-FRONT HOUSING (FRONT COVER)
236-7315 Y	[1]	FASTENER GP-VALVE COVER
233-0423 Y	[1]	FASTENER GP-VALVE COVER BASE
201-9778 Y	[1]	FILTER GP-ENGINE OIL
Y	[1]	FILTER GP-WATER SEP & FUEL
155-6615 Y	[1]	FLYWHEEL GP
187-3077 Y	[1]	FUMES DISPOSAL GP
204-1553 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK) (ENGINE)
189-9374 Y	[1]	HOUSING GP-FLYWHEEL
209-0758 Y	[1]	HOUSING GP-FRONT
169-3113 Y	[1]	LIFTING GP-ENGINE
192-2832 Y	[1]	LINES GP-ENGINE OIL
308-7680 Y	[1]	LINES GP-FUEL FILTER
197-2672 Y	[1]	LINES GP-TURBOCHARGER OIL
220-2765 Y	[1]	LINES GP-WATER
171-4687 Y	[1]	MANIFOLD GP-EXHAUST
253-7176 Y	[1]	MOUNTING GP-ALTERNATOR
194-1093 Y	[1]	MOUNTING GP-FAN DRIVE
198-6368 Y	[1]	PAN GP-OIL
215-7708 Y	[1]	PLUG GP-ENGINE
205-4013 Y	[1]	PLUG GP-WATER LINES
256-9755 Y	[1]	PULLEY GP-CRANKSHAFT
2W-8494 Y	[1]	PULLEY-ALTERNATOR (2-GROOVE)
187-6508 Y	[1]	SEAL GP-CRANKSHAFT
239-9957 Y	[1]	SENSOR GP-LIQUID LEVEL
118-7284 Y	[1]	STARTING AID GP (HEATER)
209-2108 Y	[1]	STARTING AID GP (SWITCH, WIRING)
102-5836 Y	[1]	STARTING MOTOR GP-ELECTRIC
197-0640 Y	[1]	SUPPORT GP-ENGINE
197-0643 Y	[1]	SUPPORT GP-ENGINE
396-3330 Y	[1]	TURBOCHARGER GP
204-1543 Y	[1]	VALVE GP-FLUID SAMPLING
397-9363 Y	[1]	WIRING GP-ELECTRONIC CONTROL
		S/N JSC1-99999; REH1-784
420-1759 Y	[1]	WIRING GP-ELECTRONIC CONTROL
		S/N REH785-UP

		PLEASE USE THE GASKET KIT LINK IN SIS OR CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET KIT INFORMATION
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP53400007

393-0595: ENGINE AR-COMPLETE

ENGINE AR-COMPLETE

393-0595 ENGINE AR-COMPLETE
S/N JSC1-UP; REH1-UP
AN ATTACHMENT

i06683575 SEBP5340

For full view, you need register

Parts for your C9 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
393-0592 Y	[1]	ENGINE AR-CORE
		S/N JSC1-26061; REH1-103
415-6746 Y	[1]	ENGINE AR-CORE
		S/N JSC26062-UP; REH104-UP
Y	[1]	PLATE & FILM GP
		-OR-
Y	[1]	PLATE & FILM GP
		-OR-
Y	[1]	PLATE & FILM GP

367-8487	[1]	ELECTRONICS GP-ENGINE RATINGS
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP53400008

394-8475: ENGINE AR-COMPLETE

ENGINE AR-COMPLETE

394-8475 ENGINE AR-COMPLETE
S/N JSC1-UP; REH1-UP
AN ATTACHMENT

i04857791 SEBP5340

For full view, you need register

Parts for your C9 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
393-0592 Y	[1]	ENGINE AR-CORE
Y	[1]	PLATE & FILM GP
367-9415	[1]	ELECTRONICS GP-ENGINE RATINGS
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP53400009

416-2000: ENGINE AR-COMPLETE

ENGINE AR-COMPLETE

416-2000 ENGINE AR-COMPLETE
S/N JSC1-UP; REH1-UP
AN ATTACHMENT

i06809404 SEBP5340

For full view, you need register

Parts for your C9 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
393-0592 Y	[1]	ENGINE AR-CORE
Y	[1]	PLATE & FILM GP
		S/N REH1-7991
499-1595 Y	[1]	PLATE & FILM GP
		S/N REH7992-UP

399-4540	[1]	ELECTRONICS GP-ENGINE RATINGS

		PLEASE USE THE GASKET KIT LINK IN SIS OR CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET KIT INFORMATION
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

Information:

ENGINE ARRANGEMENT

ENGINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/23

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

Responsibilities for Emission Certified Engines {1000}
2005/10/03

Storage Procedures Exist for Caterpillar Products {1000, 7000}
2008/12/08

Proper Storage Procedures for Commercial Engines {0355, 1000}
Proper Storage Procedures for Commercial Engines {0355, 1000}

A Long Term Storage and Recovery Procedure Is Now Available for Certain Commercial Engines {1000}
2010/02/03

An Updated Procedure for Manual Engine Shutdown in the Engine Operation and Maintenance Manual (OMM) Is Available {1000}
2011/04/04

Utilizing CLAAS OMM Information for Certain Caterpillar Industrial Engines {1000}
2013/06/06

Additional Cat® Reman Engines and Long Blocks Are Available for Engine Applications {1000}
2014/09/05

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/25

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}

Operation and Maintenance Manual

Engine - Clean
C9 Industrial Engines

Starting the Engine
C9 Industrial Engines

Welding on Engines with Electronic Controls
C9 Industrial Engines

Severe Service Application
C9 Industrial Engines

Special Instruction

Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}

Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}

Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}

The Long Term Storage and Recovery of Certain Commercial Engines{0355, 1000}
The Long Term Storage and Recovery of Certain Commercial Engines{0355, 1000}

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ^® Reman Parts when Compared to New Parts {1000, 1250}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN CATERPILLAR PRODUCTS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Specifications

Engine Design
C9 Industrial Engines

Tool Operating Manual

NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}

Service Letter-China

Service Letter-Asia

Systems Operation

General Information
C9 Industrial Engines

Reuse And Salvage Guidelines

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}

Contamination Control Guidelines

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

Applied Failure Analysis

Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}

Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}

Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}

Information Release Memo

APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS

CAT REMAN ANNOUNCES ADDITIONAL ENGINE AND LONG BLOCK OPTIONS FOR CAT® INDUSTRIAL AND MACHINE APPLICATIONS
CAT REMAN ANNOUNCES ADDITIONAL ENGINE AND LONG BLOCK OPTIONS FOR CAT® INDUSTRIAL AND MACHINE APPLICATIONS

CAT REMAN ANNOUNCES ADDITIONAL LONG BLOCK OPTIONS FOR CAT® INDUSTRIAL APPLICATIONS
CAT REMAN ANNOUNCES ADDITIONAL LONG BLOCK OPTIONS FOR CAT® INDUSTRIAL APPLICATIONS

Service Letter-APD

Troubleshooting

Engine Stalls at Low RPM
C7 and C9 Industrial Engines

Service Information Report
C7 and C9 Industrial Engines

Engine Misfires, Runs Rough or Is Unstable
C7 and C9 Industrial Engines

System Overview
C7 and C9 Industrial Engines

Symptom Troubleshooting
C7 and C9 Industrial Engines

Welding Precaution
C7 and C9 Industrial Engines

General Information
C7 and C9 Industrial Engines

Engine Does Not Crank
C7 and C9 Industrial Engines

Engine Vibration Is Excessive
C7 and C9 Industrial Engines

Timing - Calibrate
C7 and C9 Industrial Engines

Engine Overspeeds
C7 and C9 Industrial Engines

Power Is Intermittently Low or Power Cutout Is Intermittent
C7 and C9 Industrial Engines

Acceleration Is Poor or Throttle Response Is Poor
C7 and C9 Industrial Engines

Engine Top Speed Is Not Obtained
C7 and C9 Industrial Engines

Engine Cranks but Does Not Start
C7 and C9 Industrial Engines

Engine Has Mechanical Noise (Knock)
C7 and C9 Industrial Engines

Component Location
C7 and C9 Industrial Engines

Service Magazine

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/28

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog C9 :

393-7830 ENGINE AR

393-9132 ENGINE AR

394-9222 ENGINE AR

342-6056 ENGINE AR-COMPLETE

392-5471 ENGINE AR-COMPLETE

393-0595 ENGINE AR-COMPLETE

394-8475 ENGINE AR-COMPLETE

416-2000 ENGINE AR-COMPLETE