3N-9098 POWER TAKE-OFF GP S/N JSC1-UP; REH1-UP CLUTCH FOR USE WITH SAE NO. 1 FLYWHEEL AN ATTACHMENT C9

3N-9098 POWER TAKE-OFF GP
S/N JSC1-UP; REH1-UP
CLUTCH
FOR USE WITH SAE NO. 1 FLYWHEEL
AN ATTACHMENT

i00366960 SEBP5340

For full view, you need register

Parts for your C9 INDUSTRIAL ENGINE:

Pos.	Part No	Qty	Parts name
1.	8T-9382	[12]	BOLT (7/16-14X1.25-IN)
2.	6V-0455	[1]	BALL BEARING
3.	0S-1595	[8]	BOLT (1/2-13X1.25-IN)
4.	6B-8575	[1]	KEY-SQUARE
5.	3N-9097 Y	[1]	CLUTCH GP
	Y		SEPARATE ILLUSTRATION

#SEBP53400321

4P-3074: POWER TAKE-OFF GP

4P-3074 POWER TAKE-OFF GP
S/N JSC1-UP; REH1-UP
REAR CLUTCH SUPPORT IS REQUIRED FOR SIDE LOAD APPLICATIONS
FOR USE WITH IN-LINE LOAD ONLY, SAE NO. 1 FLYWHEEL AND FLYWHEEL HOUSING
CANNOT BE USED WITH REAR STUB SHAFT
AN ATTACHMENT

i00375421 SEBP5340

For full view, you need register

Parts for your C9 INDUSTRIAL ENGINE:

Pos.	Part No	Qty	Parts name
1.	7B-3235	[8]	BOLT (1/2-13X1.375-IN)
2.	6V-0455	[1]	BALL BEARING
3.	7F-8896	[1]	KEY-SQUARE
4.	4P-3073 Y	[1]	CLUTCH GP
5.	7X-0308	[12]	BOLT (7/16-14X1.375-IN)
	Y		SEPARATE ILLUSTRATION

#SEBP53400322

521-2314: POWER TAKE-OFF GP

521-2314 POWER TAKE-OFF GP
S/N JSC1-UP; REH1-UP
AN ATTACHMENT

i07000107 SEBP5340

For full view, you need register

Parts for your C9 INDUSTRIAL ENGINE:

Pos.	Part No	Qty	Parts name
1.	7F-8896	[1]	KEY-SQUARE
2.	Y	[1]	CLUTCH GP-POWER TAKE-OFF
3.	6V-0455	[1]	BALL BEARING
4.	7B-3235	[8]	BOLT (1/2-13X1.375-IN)
5.	7X-0308	[12]	BOLT (7/16-14X1.375-IN)
	Y		SEPARATE ILLUSTRATION

#SEBP53400323

6I-0415: POWER TAKE-OFF GP

6I-0415 POWER TAKE-OFF GP
S/N JSC1-UP; REH1-UP
FOR USE WITH SAE NO. 2 FLYWHEEL HOUSING
AN ATTACHMENT

i00389660 SEBP5340

For full view, you need register

Parts for your C9 INDUSTRIAL ENGINE:

Pos.	Part No	Qty	Parts name
1.	5P-0898	[1]	BALL BEARING
2.	4P-2270 Y	[1]	CLUTCH GP
3.	4L-4866	[1]	KEY-SQUARE
4.	9B-7237	[12]	BOLT (3/8-16X1.25-IN)
5.	0L-1143	[8]	BOLT (3/8-16X2.5-IN)
	Y		SEPARATE ILLUSTRATION

#SEBP53400324

200-1205: PULLEY GP

200-1205 PULLEY GP
S/N JSC1-UP; REH1-UP
141.5 DIA FAN PULLEY
FOR USE WITH CUSTOMER SUPPLIED 'K' SECTION 8-GROOVE POLY V-BELT
AN ATTACHMENT

i01539126 SEBP5340

For full view, you need register

Parts for your C9 INDUSTRIAL ENGINE:

Pos.	Part No	Qty	Parts name
1.	100-4026	[1]	RETAINER-BEARING
2.	111-7238	[1]	PLATE (THRUST)
3.	190-3956	[1]	PULLEY (8-GROOVE)
4.	190-3968	[1]	SHAFT-FAN
5.	200-2281	[1]	BRACKET
6.	200-2282	[1]	BEARING AS
7.	5C-7423 M	[4]	SCREW (M6X1X16-MM)
8.	5M-6509	[1]	SEAL-O-RING
9.	5W-8591 M	[4]	BOLT (M8X1.25X18-MM)
10.	6V-3940 M	[3]	BOLT (M8X1.25X25-MM)
11.	6V-5219 M	[2]	BOLT (M8X1.25X40-MM)
12.	9M-1974	[3]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART

#SEBP53400325

236-6689: PULLEY GP

236-6689 PULLEY GP
S/N JSC1-UP; REH1-UP
FOR USE WITH CLAAS INDUSTRIAL APPLICATIONS THAT USE THE PRESTOLITE ALTERNATOR (12 VOLT - 160 AMPERE)
AN ATTACHMENT

i01961311 SEBP5340

For full view, you need register

Parts for your C9 INDUSTRIAL ENGINE:

Pos.	Part No	Qty	Parts name
1.	111-7238	[1]	PLATE (THRUST)
2.	123-0858	[1]	PULLEY-ALTERNATOR (8-GROOVE)
3.	190-0649	[1]	BELT TENSIONER
4.	190-3956	[1]	PULLEY (8-GROOVE)
5.	190-3968	[1]	SHAFT-FAN
6.	307-9798	[1]	BEARING AS
7.	211-3576	[1]	BELT-SERPENTINE
8.	226-7914	[1]	BRACKET (FAN BEARING)
9.	228-5827	[1]	RETAINER-BEARING
10.	6V-3940 M	[3]	BOLT (M8X1.25X25-MM)
11.	6V-5217 M	[10]	BOLT (M8X1.25X20-MM)
12.	6V-5219 M	[2]	BOLT (M8X1.25X40-MM)
13.	6V-5839	[1]	WASHER (11X21X2.5-MM THK)
14.	8T-0643 M	[1]	BOLT (M10X1.5X80-MM)
15.	9M-1974	[3]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART

#SEBP53400326

312-3724: PULLEY GP

312-3724 PULLEY GP
S/N JSC1-UP; REH1-UP
FOR USE WITH 0.83:1 DRIVE RATIO
AN ATTACHMENT

i02898025 SEBP5340

For full view, you need register

Parts for your C9 INDUSTRIAL ENGINE:

Pos.	Part No	Qty	Parts name
1.	311-6550	[1]	PULLEY-FAN (8-GROOVE)
2.	6V-3940 M	[6]	BOLT (M8X1.25X25-MM)
3.	9M-1974	[6]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART

#SEBP53400327

473-9089: PULLEY GP

473-9089 PULLEY GP
S/N REH1-UP
AN ATTACHMENT

i06249362 SEBP5340

For full view, you need register

Parts for your C9 INDUSTRIAL ENGINE:

Pos.	Part No	Qty	Parts name
1.	123-0858	[1]	PULLEY-ALTERNATOR (8-GROOVE)
2.	208-2832	[1]	BELT-SERPENTINE
3.	220-1209	[1]	BELT TENSIONER
4.	311-6551	[1]	PULLEY AS-IDLER (8-GROOVE)
5.	6V-5839	[1]	WASHER (11X21X2.5-MM THK)
6.	8T-0643 M	[1]	BOLT (M10X1.5X80-MM)
	M		METRIC PART

#SEBP53400328

233-6136: PULLEY GP-ALTERNATOR

PULLEY GP-ALTERNATOR

233-6136 PULLEY GP-ALTERNATOR
S/N JSC1-UP; REH1-UP
CANNOT BE USED WITH ENGINES WITH AIR CONDITIONER COMPRESSOR OR ALTERNATOR INSTALLATION
AN ATTACHMENT

i01904690 SEBP5340

2336136 PULLEY GP-ALTERNATOR Parts scheme

For full view, you need register

Parts for your C9 INDUSTRIAL ENGINE: