BASIC ENGINE
PISTON & ROD GPAIR COMPRESSOR GP
CYLINDER BLOCK GP
BASIC ENGINE
PISTON & ROD GP#SEBP53410210
238-2721: PISTON & ROD GP
238-2721 PISTON & ROD GP
S/N GLS1-416
17:1 COMPRESSION RATIO
PART OF 360-6753 ENGINE AR-CORE
S/N GLS1-416
17:1 COMPRESSION RATIO
PART OF 360-6753 ENGINE AR-CORE
Parts for your C11 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 116-1089 | [1] | BEARING-CONNECTING ROD (STANDARD) | |
| 128-0395 AB | BEARING-CONNECTING ROD (0.51-MM US) | |||
| 128-0396 AB | BEARING-CONNECTING ROD (0.76-MM US) | |||
| 2. | 265-1113 | [1] | RING-PISTON (OIL CONTROL) | |
| 3. | 160-8192 | [1] | ROD AS-CONNECTING | |
| 3A. | 219-4458 | [2] | PIN-DOWEL | |
| 3B. | 115-2972 | [1] | BEARING-CONNECTING ROD | |
| 3C. | 115-2973 M | [2] | BOLT-CONNECTING ROD | |
| 4. | 197-9326 | [2] | RETAINER | |
| 5. | 197-9327 | [1] | PIN-PISTON | |
| 6. | 238-2717 | [1] | RING-PISTON-TOP | |
| 7. | 265-1111 | [1] | BODY AS-PISTON | |
| 8. | 197-9257 | [1] | RING-PISTON (INTERMEDIATE) | |
| 9. | 226-6478 | [1] | JET AS-PISTON COOLING | |
| 10. | 3E-4352 | [1] | WASHER-HARD (8.8X20.5X2.5-MM THK) | |
| 11. | 8T-0100 M | [1] | BOLT (M8X1.25X60-MM) | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP53410211
238-2721: PISTON & ROD GP
238-2721 PISTON & ROD GP
S/N HRA1-UP; GLS417-UP
17:1 COMPRESSION RATIO
PART OF 360-6749, 360-6753, 360-6758 ENGINE AR-CORE
S/N HRA1-UP; GLS417-UP
17:1 COMPRESSION RATIO
PART OF 360-6749, 360-6753, 360-6758 ENGINE AR-CORE
Parts for your C11 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 292-0484 | [1] | BEARING-CONNECTING ROD (STANDARD) | |
| 2. | 197-9257 | [1] | RING-PISTON (INTERMEDIATE) | |
| 3. | 197-9326 | [2] | RETAINER | |
| 4. | 524-6478 | [1] | PIN-PISTON | |
| 5. | 223-9133 C | [1] | ROD AS-CONNECTING | |
| 5A. | 115-2972 | [1] | BEARING-CONNECTING ROD | |
| 5B. | 115-2973 M | [2] | BOLT-CONNECTING ROD | |
| 6. | 238-2717 | [1] | RING-PISTON-TOP | |
| 7. | 339-8176 | [1] | BODY AS-PISTON | |
| 8. | 265-1113 | [1] | RING-PISTON (OIL CONTROL) | |
| 9. | 276-7222 C | [1] | TUBE AS-OIL JET | |
| 10. | 3E-4352 | [1] | WASHER-HARD (8.8X20.5X2.5-MM THK) | |
| 11. | 8T-0100 M | [1] | BOLT (M8X1.25X60-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP53410212
277-4857: PLUG GP-AIR COMPRESSOR
Parts for your C11 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP53410213
278-0026: PLUG GP-AIR COMPRESSOR
Parts for your C11 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP53410214
117-0164: PLUG GP-CYLINDER BLOCK
117-0164 PLUG GP-CYLINDER BLOCK
S/N HRA1-UP; GLS1-UP
CANNOT BE USED WITH OIL GAUGE
AN ATTACHMENT
S/N HRA1-UP; GLS1-UP
CANNOT BE USED WITH OIL GAUGE
AN ATTACHMENT
Parts for your C11 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 209-7309 | [4] | PLUG |
#SEBP53410215
117-0165: PLUG GP-CYLINDER BLOCK
117-0165 PLUG GP-CYLINDER BLOCK -OIL GALLERY, END
S/N HRA100-UP; GLS1-UP
ALSO AN ATTACHMENT
S/N HRA100-UP; GLS1-UP
ALSO AN ATTACHMENT
Parts for your C11 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-0623 | [1] | PLUG-CUP |
#SEBP53410216
223-3875: PLUG GP-CYLINDER BLOCK
Parts for your C11 INDUSTRIAL ENGINE:
CATERPILLAR SIS#SEBP53410217
227-9545: PLUG GP-CYLINDER BLOCK
227-9545 PLUG GP-CYLINDER BLOCK -OIL GALLERY, RH
S/N HRA100-UP; GLS1-UP
ALSO AN ATTACHMENT
S/N HRA100-UP; GLS1-UP
ALSO AN ATTACHMENT
#SEBP53410218
117-0178: PLUG GP-ENGINE
117-0178 PLUG GP-ENGINE -REAR CRANKSHAFT
S/N HRA1-UP; GLS1-UP
PROVIDES PLUGS FOR REAR CRANKSHAFT FLANGE WHEN ENGINE BUILT WITHOUT FLYWHEEL
CANNOT BE USED WITH FLYWHEEL
AN ATTACHMENT
S/N HRA1-UP; GLS1-UP
PROVIDES PLUGS FOR REAR CRANKSHAFT FLANGE WHEN ENGINE BUILT WITHOUT FLYWHEEL
CANNOT BE USED WITH FLYWHEEL
AN ATTACHMENT
Parts for your C11 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP53410219
237-9753: PLUG GP-ENGINE
237-9753 PLUG GP-ENGINE
S/N HRA1-UP; GLS1-UP
CANNOT BE USED WITH AIR COMPRESSOR
ALSO AN ATTACHMENT
S/N HRA1-UP; GLS1-UP
CANNOT BE USED WITH AIR COMPRESSOR
ALSO AN ATTACHMENT
Information:
BASIC ENGINE
PISTON & ROD GP
Engine News
Special Instruction
Correct Combinations of Connecting Rods Allowed in Remanufactured Cylinder Packs for Certain C13 Engines{1218, 1225, 1239}
Correct Combinations of Connecting Rods Allowed in Remanufactured Cylinder Packs for Certain C13 Engines{1218, 1225, 1239}
Correct Combinations of Connecting Rods Allowed in Remanufactured Cylinder Packs for Certain C13 Engines{1218, 1225, 1239}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Reman Connecting Rods May Have Been Assembled with Incorrect Bolts on Certain Cat<SUP>®</SUP> Engines {1225}
Reman Connecting Rods May Have Been Assembled with Incorrect Bolts on Certain Cat® Engines {1225}
Reman Connecting Rods May Have Been Assembled with Incorrect Bolts on Certain Cat® Engines {1225}
Specifications
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Testing and Adjusting
Disassembly and Assembly
