322-4472 PULVERIZER GP-HYDRAULIC S/N WPX1-UP PART OF 334-5812 PULVERIZER AR-HYDRAULIC P360 CRUSHER

322-4472 PULVERIZER GP-HYDRAULIC
S/N WPX1-UP
PART OF 334-5812 PULVERIZER AR-HYDRAULIC

i03565918 SEBP5361

3224472 PULVERIZER GP-HYDRAULIC Parts scheme

For full view, you need register

Parts for your P360 CRUSHER:

Pos.	Part No	Qty	Parts name
1.	5W-2817	[5]	FITTING-GREASE
2.	159-1118	[8]	LOCKWASHER
3.	159-1121	[6]	LOCKWASHER
4.	169-4641	[2]	BUSHING
5.	391-3716	[1]	TOOTH AS-RIPPER
6.	169-7112 B	[2]	SHIM (2.5-MM THK)
7.	169-7113 B	[2]	SHIM (3-MM THK)
8.	169-7114 B	[2]	SHIM (3.5-MM THK)
9.	170-3669	[1]	LOCK
10.	171-7526 Y	[1]	ROTATOR GP-HYDRAULIC
11.	171-8114	[1]	PIN
12.	171-8115	[2]	BUSHING
13.	171-8119	[1]	PLATE-LOCK
14.	171-8121	[1]	LOCK AS
15.	172-5903	[2]	EDGE-CUTTING
16.	172-5904 B	[6]	SHIM (1-MM THK)
17.	172-5905 B	[2]	SHIM (1.5-MM THK)
18.	280-9200	[10]	TOOTH
19.	322-4488	[1]	HOUSING GP-PULVERIZER
19A.	322-4517	[2]	PLATE-WEAR
19B.	322-4518	[1]	PLATE-WEAR
20.	322-4489	[1]	JAW AS
21.	322-4509	[1]	PIN
22.	329-3538	[1]	NUT (M100X4-THD)
23.	329-3539	[1]	NUT (M100X4-THD)
24.	341-3990 Y	[1]	CYLINDER & VALVE GP
25.	159-1122	[10]	LOCKWASHER
26.	174-6481 M	[1]	BOLT-SOCKET HEAD (M30X3.5X120-MM)
27.	170-3524 M	[8]	SCREW-FLAT HEAD
28.	174-6393 M	[24]	BOLT-SOCKET HEAD (M20X2.5X80-MM)
29.	8T-0348 M	[6]	BOLT-SOCKET HEAD (M16X2X50-MM)
30.	8T-0363 M	[10]	BOLT (M24X3X120-MM)
31.	8T-1159 M	[6]	BOLT-SOCKET HEAD (M10X1.5X25-MM)
32.	8T-1160 M	[2]	BOLT-SOCKET HEAD (M10X1.5X50-MM)
33.	8T-4001 M	[10]	NUT (M24X3-THD)
34.	8T-4123	[56]	WASHER (3.62X5.75X0.375-MM THK)
35.	8T-4131 M	[8]	NUT (M20X2.5-THD)
36.	8T-4140 M	[2]	BOLT (M16X2X60-MM)
37.	8T-4141 M	[24]	BOLT (M20X2.5X70-MM)
38.	8C-8722 M	[1]	NUT (M30X3.5-THD)
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP53610071

323-0387: PULVERIZER GP-HYDRAULIC

323-0387 PULVERIZER GP-HYDRAULIC
S/N WPL1-UP
PART OF 334-5813 PULVERIZER AR-HYDRAULIC
Type 1

i03566101 SEBP5361

3230387 PULVERIZER GP-HYDRAULIC Parts scheme

For full view, you need register

Parts for your P360 CRUSHER:

Pos.	Part No	Qty	Parts name
1.	5W-2817	[5]	FITTING-GREASE
2.	159-1121	[6]	LOCKWASHER
3.	313-1306	[10]	TOOTH
4.	172-1107	[1]	PIN
5.	172-1109	[2]	BUSHING
6.	172-1120	[1]	LOCK
7.	172-3723	[2]	BUSHING
8.	172-3725 B	[2]	SHIM (2.5-MM THK)
9.	172-3726 B	[2]	SHIM (3-MM THK)
10.	172-3727 B	[2]	SHIM (3.5-MM THK)
11.	172-5903	[2]	EDGE-CUTTING
12.	172-5904 B	[6]	SHIM (1-MM THK)
13.	172-5905 B	[2]	SHIM (1.5-MM THK)
14.	173-1692	[1]	TOOTH AS-RIPPER
15.	323-0391	[1]	HOUSING GP-PULVERIZER
15A.	323-3040	[2]	PLATE-WEAR
15B.	323-3041	[1]	PLATE-WEAR
16.	323-0392	[1]	JAW AS
17.	323-3013	[1]	PIN
18.	329-3539	[1]	NUT (M100X4-THD)
19.	329-3540	[1]	NUT (M120X4-THD)
20.	329-4200 Y	[1]	ROTATOR GP-HYDRAULIC
21.	342-7060 Y	[1]	CYLINDER & VALVE GP
22.	169-3177	[10]	LOCKWASHER
23.	170-3524 M	[8]	SCREW-FLAT HEAD
24.	174-6480 M	[36]	BOLT-SOCKET HEAD (M20X2.5X120-MM)
25.	174-6481 M	[2]	BOLT-SOCKET HEAD (M30X3.5X120-MM)
26.	4J-0524	[2]	SEAL-O-RING
27.	7X-2584 M	[10]	BOLT (M30X3.5X140-MM)
28.	8C-8722 M	[10]	NUT (M30X3.5-THD)
29.	8T-0348 M	[6]	BOLT-SOCKET HEAD (M16X2X50-MM)
30.	8T-4123	[44]	WASHER (3.62X5.75X0.375-MM THK)
31.	8T-4131 M	[8]	NUT (M20X2.5-THD)
32.	8T-4141 M	[36]	BOLT (M20X2.5X70-MM)
33.	8T-6430 M	[1]	BOLT (M20X2.5X50-MM)
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP53610072

323-0387: PULVERIZER GP-HYDRAULIC

323-0387 PULVERIZER GP-HYDRAULIC
S/N WPL1-UP
PART OF 334-5813 PULVERIZER AR-HYDRAULIC
Type 2

i06882938 SEBP5361

For full view, you need register

Parts for your P360 CRUSHER:

Pos.	Part No	Qty	Parts name
1.	5W-2817	[5]	FITTING-GREASE
2.	159-1121	[6]	LOCKWASHER
3.	313-1306	[10]	TOOTH
4.	172-1107	[1]	PIN
5.	172-1109	[2]	BUSHING
6.	172-1120	[1]	LOCK
7.	172-3723	[2]	BUSHING
8.	172-3725 B	[2]	SHIM (2.5-MM THK)
9.	172-3726 B	[2]	SHIM (3-MM THK)
10.	172-3727 B	[2]	SHIM (3.5-MM THK)
11.	172-5903	[2]	EDGE-CUTTING
12.	172-5904 B	[6]	SHIM (1-MM THK)
13.	172-5905 B	[2]	SHIM (1.5-MM THK)
14.	473-8873 C	[1]	TOOTH (RIPPER)
15.	323-0391	[1]	HOUSING GP-PULVERIZER
15A.	323-3040	[2]	PLATE-WEAR
15B.	323-3041	[1]	PLATE-WEAR
16.	323-0392	[1]	JAW AS
17.	323-3013	[1]	PIN
18.	329-3539	[1]	NUT (M100X4-THD)
19.	329-3540	[1]	NUT (M120X4-THD)
20.	329-4200 Y	[1]	ROTATOR GP-HYDRAULIC
21.	342-7060 Y	[1]	CYLINDER & VALVE GP
22.	169-3177	[10]	LOCKWASHER
23.	170-3524 M	[8]	SCREW-FLAT HEAD
24.	144-3697 M	[36]	BOLT-SOCKET HEAD (M20X2.5X120-MM)
25.	107-3953 CM	[2]	BOLT (M30X3.5X150-MM)
26.	4J-0524	[2]	SEAL-O-RING
27.	7X-2584 M	[10]	BOLT (M30X3.5X140-MM)
28.	8C-8722 CM	[12]	NUT (M30X3.5-THD)
29.	8T-0348 M	[6]	BOLT-SOCKET HEAD (M16X2X50-MM)
30.	8T-4123	[44]	WASHER (3.62X5.75X0.375-MM THK)
31.	8T-4131 M	[8]	NUT (M20X2.5-THD)
32.	8T-4141 M	[36]	BOLT (M20X2.5X70-MM)
33.	8T-6430 M	[1]	BOLT (M20X2.5X50-MM)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP53610073

328-9349: PULVERIZER GP-HYDRAULIC

328-9349 PULVERIZER GP-HYDRAULIC
S/N WPZ1-UP
PART OF 334-9388 PULVERIZER AR-HYDRAULIC

i03564373 SEBP5361

3289349 PULVERIZER GP-HYDRAULIC Parts scheme

For full view, you need register

Parts for your P360 CRUSHER:

Pos.	Part No	Qty	Parts name
1.	5W-2817	[5]	FITTING-GREASE
2.	313-1305	[10]	TOOTH (CRUSHER)
3.	169-0385	[2]	EDGE-CUTTING
4.	169-0386 B	[6]	SHIM (1-MM THK)
5.	169-0388 B	[2]	SHIM (1.5-MM THK)
6.	169-3171	[2]	BUSHING
7.	169-6048	[1]	PIN
8.	391-3716	[1]	TOOTH AS-RIPPER
9.	170-3669	[1]	LOCK
10.	170-3670	[1]	PLATE-LOCK
11.	170-3671	[1]	LOCK PIN
12.	170-5111	[2]	BUSHING
13.	170-5707	[1]	LOCKPIN
14.	318-5943	[1]	PIN
15.	318-5944 B	[2]	SHIM-RING
16.	318-5945 B	[2]	SHIM-RING
17.	318-5946 B	[2]	SHIM-RING
18.	318-6004	[1]	JAW AS
	318-5984	[1]	PLATE-JAW
	318-5985	[1]	PLATE-WEAR
	318-5986	[1]	PLATE-WEAR
19.	318-9960	[2]	NUT (M70X3-THD)
20.	319-2123 Y	[1]	ROTATOR GP-HYDRAULIC
21.	329-3008	[1]	HOUSING GP-PULVERIZER
21A.	318-5956	[2]	PLATE-WEAR
21B.	318-5957	[1]	PLATE-WEAR
22.	339-1843 Y	[1]	CYLINDER & VALVE GP
23.	159-1118	[10]	LOCKWASHER
24.	159-1121	[6]	LOCKWASHER
25.	159-1122	[10]	LOCKWASHER
26.	169-6065 M	[6]	SCREW-FLAT HEAD
27.	174-6481 M	[1]	BOLT-SOCKET HEAD (M30X3.5X120-MM)
29.	7X-2454 M	[10]	BOLT (M24X3X110-MM)
30.	8T-0271 M	[6]	BOLT-SOCKET HEAD (M10X1.5X35-MM)
31.	8T-0070 M	[32]	BOLT (M20X2.5X120-MM)
32.	8T-0439 M	[6]	BOLT-SOCKET HEAD (M16X2X30-MM)
33.	8T-4001 M	[10]	NUT (M24X3-THD)
34.	8T-4123	[38]	WASHER (3.62X5.75X0.375-MM THK)
35.	8T-4131 M	[6]	NUT (M20X2.5-THD)
36.	8T-4140 M	[24]	BOLT (M16X2X60-MM)
37.	8T-4185 M	[2]	BOLT (M10X1.5X50-MM)
38.	9X-8257	[24]	WASHER (17.5X30X3.5-MM THK)
39.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
40.	8C-8722 M	[1]	NUT (M30X3.5-THD)
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP53610074

328-9351: PULVERIZER GP-HYDRAULIC

328-9351 PULVERIZER GP-HYDRAULIC
S/N WPY1-UP
PART OF 334-9389 PULVERIZER AR-HYDRAULIC

i03565793 SEBP5361

3289351 PULVERIZER GP-HYDRAULIC Parts scheme

For full view, you need register

Parts for your P360 CRUSHER:

Pos.	Part No	Qty	Parts name
1.	5W-2817	[5]	FITTING-GREASE
2.	159-1121	[6]	LOCKWASHER
3.	169-0379 B	[2]	SHIM (2.5-MM THK)
4.	169-0380 B	[2]	SHIM (3-MM THK)
5.	169-0381 B	[2]	SHIM (3.5-MM THK)
6.	169-3455	[2]	BUSHING
7.	391-3716	[1]	TOOTH AS-RIPPER
8.	169-7117	[2]	EDGE-CUTTING
9.	169-7118 B	[6]	SHIM (1-MM THK)
10.	169-7119 B	[2]	SHIM (1.5-MM THK)
11.	170-3661	[1]	PIN
12.	170-3663	[2]	BUSHING
13.	170-3669	[1]	LOCK
14.	170-3670	[1]	PLATE-LOCK
15.	170-3671	[1]	LOCK PIN
16.	170-5707	[1]	LOCKPIN
17.	280-9200	[10]	TOOTH
18.	314-9129	[1]	JAW AS
19.	314-9181	[1]	PIN
20.	319-2123 Y	[1]	ROTATOR GP-HYDRAULIC
21.	324-2947	[2]	NUT (M80X4-THD)
22.	329-3009	[1]	HOUSING AS
22A.	314-9156	[1]	PLATE-WEAR
22B.	314-9155	[2]	PLATE-WEAR
23.	339-2852 Y	[1]	CYLINDER & VALVE GP
24.	145-4075 M	[6]	BOLT (M20X2.5X75-MM)
25.	159-1118	[10]	LOCKWASHER
26.	159-1122	[10]	LOCKWASHER
27.	174-6481 M	[1]	BOLT-SOCKET HEAD (M30X3.5X120-MM)
28.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
29.	8T-0271 M	[6]	BOLT-SOCKET HEAD (M10X1.5X35-MM)
30.	8T-0348 M	[6]	BOLT-SOCKET HEAD (M16X2X50-MM)
31.	8T-0070 M	[32]	BOLT (M20X2.5X120-MM)
32.	8T-0363 M	[10]	BOLT (M24X3X120-MM)
33.	8T-4001 M	[10]	NUT (M24X3-THD)
34.	8T-4123	[38]	WASHER (3.62X5.75X0.375-MM THK)
35.	8T-4131 M	[6]	NUT (M20X2.5-THD)
36.	8T-4140 M	[24]	BOLT (M16X2X60-MM)
37.	8T-4185 M	[2]	BOLT (M10X1.5X50-MM)
38.	9X-8257	[24]	WASHER (17.5X30X3.5-MM THK)
39.	8C-8722 M	[1]	NUT (M30X3.5-THD)
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP53610075

339-1843: CYLINDER & VALVE GP

339-1843 CYLINDER & VALVE GP
S/N WPZ1-UP
PART OF 328-9349 PULVERIZER GP-HYDRAULIC

i03564409 SEBP5361

3391843 CYLINDER & VALVE GP Parts scheme

For full view, you need register

Parts for your P360 CRUSHER:

Pos.	Part No	Qty	Parts name
1.	170-3229 Y	[1]	VALVE GP-SPEED CONTROL
2.	170-5537 I	[1]	HOSE AS
3.	170-5538 I	[1]	HOSE AS
4.	170-5540 I	[2]	HOSE AS
5.	170-5593	[1]	VALVE
6.	170-5594	[1]	PLATE-MOUNTING
7.	222-8827 Y	[1]	CYLINDER GP-HYDRAULIC
8.	343-1837	[1]	PLATE AS-COVER (CYLINDER)
9.	343-1845	[1]	PIN
10.	148-8351	[1]	ELBOW AS
	4J-5477	[1]	SEAL-O-RING
	6V-9849	[1]	ELBOW
11.	148-8392	[2]	ELBOW AS
			(EACH INCLUDES)
	6V-9746	[1]	SEAL-O-RING
	6V-9853	[1]	ELBOW
12.	159-1118	[2]	LOCKWASHER
13.	162-6599	[2]	ADAPTER AS
			(EACH INCLUDES)
	6V-9746	[1]	SEAL-O-RING
	155-9646	[1]	SEAL
14.	170-5121	[2]	ADAPTER AS
			(EACH INCLUDES)
	4J-5477	[1]	SEAL-O-RING
	162-6816	[1]	SEAL
15.	170-5122	[2]	ADAPTER AS
			(EACH INCLUDES)
	4J-5477	[1]	SEAL-O-RING
	162-2254	[1]	SEAL
16.	170-5715	[3]	SEAL-O-RING
17.	177-1448	[2]	RING-RETAINING
18.	1P-3703	[2]	SEAL-RECTANGULAR
19.	6V-0400	[4]	FLANGE-HALF
20.	7X-2557 M	[4]	BOLT (M16X2X140-MM)
21.	8T-0638 M	[2]	BOLT (M5X0.8X50-MM)
22.	8T-4184 M	[8]	BOLT (M12X1.75X45-MM)
23.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
24.	8T-4223	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
25.	9X-8257	[4]	WASHER (17.5X30X3.5-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP53610076

339-2852: CYLINDER & VALVE GP

339-2852 CYLINDER & VALVE GP
S/N WPY1-UP
PART OF 328-9351 PULVERIZER GP-HYDRAULIC

i03565821 SEBP5361

3392852 CYLINDER & VALVE GP Parts scheme

For full view, you need register

Parts for your P360 CRUSHER:

Pos.	Part No	Qty	Parts name
1.	170-3229 Y	[1]	VALVE GP-SPEED CONTROL
2.	170-5538 I	[1]	HOSE AS
3.	170-5539 I	[1]	HOSE AS
4.	170-5540 I	[2]	HOSE AS
5.	170-5593	[1]	VALVE
6.	170-5594	[1]	PLATE-MOUNTING
7.	222-8829 Y	[1]	CYLINDER GP-HYDRAULIC
8.	343-1838	[1]	PLATE AS-COVER (CYLINDER)
9.	343-1845	[1]	PIN
10.	148-8351	[1]	ELBOW AS
	4J-5477	[1]	SEAL-O-RING
	6V-9849	[1]	ELBOW
11.	148-8392	[2]	ELBOW AS
			(EACH INCLUDES)
	6V-9746	[1]	SEAL-O-RING
	6V-9853	[1]	ELBOW
12.	159-1118	[2]	LOCKWASHER
13.	162-6599	[2]	ADAPTER AS
			(EACH INCLUDES)
	6V-9746	[1]	SEAL-O-RING
	155-9646	[1]	SEAL
14.	170-5121	[2]	ADAPTER AS
			(EACH INCLUDES)
	4J-5477	[1]	SEAL-O-RING
	162-6816	[1]	SEAL
15.	170-5122	[2]	ADAPTER AS
			(EACH INCLUDES)
	4J-5477	[1]	SEAL-O-RING
	162-2254	[1]	SEAL
16.	170-5715	[3]	SEAL-O-RING
17.	177-1448	[2]	RING-RETAINING
18.	1P-3703	[2]	SEAL-RECTANGULAR
19.	6V-0400	[4]	FLANGE-HALF
20.	7X-2557 M	[4]	BOLT (M16X2X140-MM)
21.	8T-0638 M	[2]	BOLT (M5X0.8X50-MM)
22.	8T-4184 M	[8]	BOLT (M12X1.75X45-MM)
23.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
24.	8T-4223	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
25.	9X-8257	[4]	WASHER (17.5X30X3.5-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP53610077

341-3990: CYLINDER & VALVE GP

341-3990 CYLINDER & VALVE GP
S/N WPX1-UP
PART OF 322-4472 PULVERIZER GP-HYDRAULIC

i03565927 SEBP5361

3413990 CYLINDER & VALVE GP Parts scheme

For full view, you need register

Parts for your P360 CRUSHER:

Pos.	Part No	Qty	Parts name
1.	170-3229 Y	[1]	VALVE GP-SPEED CONTROL
2.	170-5593	[1]	VALVE
3.	170-5594	[1]	PLATE-MOUNTING
4.	171-8124 Y	[1]	CYLINDER GP-HYDRAULIC
5.	172-8513 I	[2]	HOSE AS
6.	172-8514 I	[2]	HOSE AS
7.	1P-3703	[4]	SEAL-RECTANGULAR
8.	343-1839	[1]	PLATE AS-COVER (CYLINDER)
9.	343-1846	[1]	PIN
10.	148-8351	[1]	ELBOW AS
	4J-5477	[1]	SEAL-O-RING
	6V-9849	[1]	ELBOW
11.	148-8352	[2]	ELBOW AS
			(EACH INCLUDES)
	5K-9090	[1]	SEAL-O-RING
	6V-9854	[1]	ELBOW (SWIVEL)
12.	159-1118	[2]	LOCKWASHER
13.	170-5121	[2]	ADAPTER AS
			(EACH INCLUDES)
	4J-5477	[1]	SEAL-O-RING
	162-6816	[1]	SEAL
14.	170-5122	[2]	ADAPTER AS
			(EACH INCLUDES)
	4J-5477	[1]	SEAL-O-RING
	162-2254	[1]	SEAL
15.	170-5715	[3]	SEAL-O-RING
16.	172-9966 M	[8]	BOLT (M12X1.75X65-MM)
17.	174-5364	[2]	ADAPTER AS
			(EACH INCLUDES)
	5K-9090	[1]	SEAL-O-RING
	166-3781	[1]	SEAL
18.	177-1448	[1]	RING-RETAINING
19.	5C-4580	[2]	SPACER (23.5X38.1X15-MM THK)
20.	6V-0400	[4]	FLANGE-HALF
21.	7X-2557 M	[4]	BOLT (M16X2X140-MM)
22.	8T-0638 M	[2]	BOLT (M5X0.8X50-MM)
23.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
24.	8T-4223	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
25.	9X-8257	[4]	WASHER (17.5X30X3.5-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP53610078

342-7060: CYLINDER & VALVE GP

342-7060 CYLINDER & VALVE GP
S/N WPL1-UP
PART OF 323-0387 PULVERIZER GP-HYDRAULIC
Type 1

i03566142 SEBP5361

3427060 CYLINDER & VALVE GP Parts scheme

For full view, you need register

Parts for your P360 CRUSHER:

Pos.	Part No	Qty	Parts name
1.	144-5606	[5]	BOLT-SOCKET HEAD (M20X2.5X140-MM)
2.	170-5593	[1]	VALVE
3.	170-5594	[1]	PLATE-MOUNTING
4.	172-1114	[2]	FLANGE
5.	172-2205 Y	[1]	CYLINDER GP-HYDRAULIC
6.	172-8514 I	[1]	HOSE AS
7.	173-2970 I	[2]	HOSE AS
8.	173-2971 I	[1]	HOSE AS
9.	187-2044	[2]	FLANGE
10.	208-5125 Y	[1]	VALVE GP-SPEED CONTROL
11.	343-1840	[1]	PLATE AS-COVER (CYLINDER)
12.	343-1846	[1]	PIN
13.	148-8351	[1]	ELBOW AS
	4J-5477	[1]	SEAL-O-RING
	6V-9849	[1]	ELBOW
14.	159-1118	[2]	LOCKWASHER
15.	159-1121	[8]	LOCKWASHER
16.	170-5121	[2]	ADAPTER AS
			(EACH INCLUDES)
	4J-5477	[1]	SEAL-O-RING
	162-6816	[1]	SEAL
17.	170-5122	[2]	ADAPTER AS
			(EACH INCLUDES)
	4J-5477	[1]	SEAL-O-RING
	162-2254	[1]	SEAL
18.	170-8555 M	[8]	BOLT (M16X2X90-MM)
19.	177-1448	[2]	RING-RETAINING
20.	1P-3705	[4]	SEAL-RECTANGULAR
21.	4J-0524	[7]	SEAL-O-RING
22.	5P-8077	[8]	FLANGE-HALF
23.	8T-0638 M	[2]	BOLT (M5X0.8X50-MM)
24.	8T-2393 M	[8]	BOLT-SOCKET HEAD (M16X2X60-MM)
25.	8T-4123	[5]	WASHER (3.62X5.75X0.375-MM THK)
26.	8T-4140 M	[8]	BOLT (M16X2X60-MM)
27.	8T-4196 M	[2]	BOLT (M10X1.5X35-MM)
28.	9X-8257	[16]	WASHER (17.5X30X3.5-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP53610079

342-7060: CYLINDER & VALVE GP

342-7060 CYLINDER & VALVE GP
S/N WPL1-UP
PART OF 323-0387 PULVERIZER GP-HYDRAULIC
Type 2

i05339866 SEBP5361

For full view, you need register

Parts for your P360 CRUSHER: