OPERATOR STATION
CONSOLE GPELECTRICAL AND STARTING SYSTEM
SENSOR GPSTARTING AR
STARTING MOTOR GP
SWITCH GP
OPERATOR STATION
CONSOLE GP
#SEBP53700190
251-0544: PANEL GP-SWITCH
251-0544 PANEL GP-SWITCH -ENGINE SPEED, START
S/N DLP1-UP
PART OF 227-7581 INSTALLATION GP-SECURITY
Type 4
AN ATTACHMENT
S/N DLP1-UP
PART OF 227-7581 INSTALLATION GP-SECURITY
Type 4
AN ATTACHMENT
For full view, you need register
Parts for your 312D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [5] | STRAP-CABLE | |
| 2. | 255-2751 JY | [1] | SWITCH GP-START (ENGINE, KEY) | |
| 3. | 319-4420 Y | [1] | SWITCH GP-ROTARY (THROTTLE POSITION) | |
| 4. | 185-9208 | [1] | KNOB AS | |
| 5. | 205-0826 | [1] | FILM-INSTRUCTION (MACHINE SECURITY, CONSOLE) | |
| 6. | 206-5208 | [1] | COIL AS (EXCITER) | |
| 7. | 234-1156 | [1] | COVER | |
| 8. | 267-7977 | [1] | PANEL | |
| 9. | 495-9718 CY | [1] | HARNESS AS-PANEL | |
| 10. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 11. | 119-5026 | [4] | SCREW-PAN HEAD (10-16X0.63-IN) | |
| 12. | 123-0707 M | [4] | SCREW-HEX SOCKET (M4X0.7X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | REQUIRES CORPORATE KEY | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP53700191
296-4802: SENSOR GP-ENGINE
296-4802 SENSOR GP-ENGINE
S/N JKH1-UP
PART OF 279-7814, 420-2179 ENGINE AR
ALSO AN ATTACHMENT
S/N JKH1-UP
PART OF 279-7814, 420-2179 ENGINE AR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 312D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 238-0112 | [1] | SENSOR GP-TEMPERATURE (ENGINE COOLANT) | |
| 1A. | 238-0112 | [1] | SENSOR GP-TEMPERATURE (AIR INLET) | |
| 1B. | 238-0112 | [1] | SENSOR GP-TEMPERATURE (FUEL) | |
| 2. | 238-0118 | [1] | SENSOR GP-PRESSURE (FUEL MANIFOLD) | |
| 3. | 296-4631 | [1] | WASHER (6.06X9.5X1-MM THK) | |
| 4. | 274-6720 | [1] | SENSOR GP-PRESSURE (AIR INLET MANIFOLD) | |
| 5. | 274-6721 | [1] | SENSOR GP-PRESSURE (FUEL) | |
| 5A. | 274-6721 | [1] | SENSOR GP-PRESSURE (ENGINE OIL) | |
| 6. | 238-0120 | [1] | SENSOR GP-SPEED (ENGINE) | |
| 7. | 324-4131 | [1] | SENSOR GP-SPEED (ENGINE) | |
| 8. | 294-1804 | [5] | SEAL-O-RING | |
| 9. | 296-4633 | [1] | SEAL-O-RING | |
| 10. | 266-0136 | [1] | SENSOR GP-PRESSURE (FUEL) | |
| 9X-1813 E | SLEEVE (8-CM) | |||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 237-0228 | [1] | RECEPTACLE AS-CONNECTOR | ||
| 11. | 296-4621 | [2] | BOLT (M8X1.25-THD) | |
| E | ORDER BY THE CENTIMETER | |||
#SEBP53700192
178-2345: SENSOR GP-LIQUID LEVEL
178-2345 SENSOR GP-LIQUID LEVEL -WATER IN FUEL
S/N DLP1-UP
PART OF 279-7796 SENSOR GP-LIQUID LEVEL
AN ATTACHMENT
S/N DLP1-UP
PART OF 279-7796 SENSOR GP-LIQUID LEVEL
AN ATTACHMENT
For full view, you need register
Parts for your 312D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 178-2334 | [1] | PROBE AS-LIQUID LEVEL (WATER SEPARATOR) | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 2. | 178-2335 | [1] | SENSOR AS-LIQUID LEVEL (WATER SEPARATOR) | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 186-3735 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 186-3736 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3. | 3J-1907 | [1] | SEAL-O-RING | |
#SEBP53700193
279-7796: SENSOR GP-LIQUID LEVEL
279-7796 SENSOR GP-LIQUID LEVEL -WATER IN FUEL
S/N DLP1-UP
PART OF 336-3352, 336-3353, 336-3354 OPTION AR-CAB
Type 1
AN ATTACHMENT
S/N DLP1-UP
PART OF 336-3352, 336-3353, 336-3354 OPTION AR-CAB
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 312D EXCAVATOR:
CATERPILLAR SIS#SEBP53700194
279-7796: SENSOR GP-LIQUID LEVEL
279-7796 SENSOR GP-LIQUID LEVEL -WATER IN FUEL
S/N DLP1-UP
PART OF 336-3352, 336-3353, 336-3354 OPTION AR-CAB
Type 2
AN ATTACHMENT
S/N DLP1-UP
PART OF 336-3352, 336-3353, 336-3354 OPTION AR-CAB
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 312D EXCAVATOR:
CATERPILLAR SIS#SEBP53700195
382-2001: SENSOR GP-LIQUID LEVEL
382-2001 SENSOR GP-LIQUID LEVEL -WATER IN FUEL
S/N DLP1-UP
PART OF 279-7796 SENSOR GP-LIQUID LEVEL
AN ATTACHMENT
S/N DLP1-UP
PART OF 279-7796 SENSOR GP-LIQUID LEVEL
AN ATTACHMENT
For full view, you need register
Parts for your 312D EXCAVATOR:
CATERPILLAR SIS#SEBP53700196
434-8214: SENSOR GP-PRESSURE
434-8214 SENSOR GP-PRESSURE
S/N DLP1-UP
PART OF 278-6697 LINES GP-FRONT
AN ATTACHMENT
S/N DLP1-UP
PART OF 278-6697 LINES GP-FRONT
AN ATTACHMENT
For full view, you need register
Parts for your 312D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 434-3436 | [1] | SENSOR AS-PRESSURE (BOOM CYLINDER) | |
| 1A. | 3K-0360 | [1] | SEAL-O-RING | |
| 2. | 366-9313 | [1] | HARNESS AS-SENSOR | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3402 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [3] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 230-4013 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
#SEBP53700197
298-4105: STARTING AR-COLD WEATHER
For full view, you need register
Parts for your 312D EXCAVATOR:
CATERPILLAR SIS#SEBP53700198
272-4774: STARTING MOTOR GP-ELECTRIC
272-4774 STARTING MOTOR GP-ELECTRIC
S/N JKH1-UP
PART OF 296-4637 MOUNTING GP-STARTING MOTOR
ALSO AN ATTACHMENT
S/N JKH1-UP
PART OF 296-4637 MOUNTING GP-STARTING MOTOR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 312D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 127-5947 | [1] | SETSCREW | |
| 2. | 294-1855 C | [1] | BRACKET AS | |
| 127-5937 | [1] | BEARING AS | ||
| 3. | 127-5944 | [1] | LEVER AS | |
| 4. | 294-1857 C | [1] | SOLENOID AS-STARTING MOTOR (24-VOLT) | |
| 5. | 127-5948 | [1] | BALL | |
| 6. | 127-5949 | [1] | PACKING AS | |
| 7. | 127-5950 | [1] | ARMATURE AS | |
| 095-0410 | [1] | BEARING | ||
| 8. | 095-0085 | [1] | BOLT SET | |
| 9. | 279-7750 | [1] | PINION SET | |
| 094-9950 | [1] | STOP SET | ||
| 10. | 233-1279 | [1] | SHAFT GP-MOTOR | |
| 127-5939 | [1] | SHAFT AS-GEAR | ||
| 127-5940 | [1] | WASHER AS | ||
| 127-5941 | [1] | GEAR AS-INTERNAL | ||
| 127-5943 | [4] | GEAR AS (55/138-TEETH) | ||
| 233-1280 | [1] | CLUTCH | ||
| 11. | 094-9980 | [2] | GASKET | |
| 12. | 127-5952 | [1] | YOKE AS | |
| 127-5953 | [2] | BRUSH | ||
| 13. | 294-1858 C | [1] | HOLDER AS | |
| 14. | 135-2366 | [1] | BRACKET | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP53700199
7N-0718: SWITCH GP-DISCONNECT
7N-0718 SWITCH GP-DISCONNECT -BATTERY
S/N DLP1-UP
PART OF 319-1170, 319-1255, 376-8745 PANEL GP-CIRCUIT BREAKER
S/N DLP1-UP
PART OF 319-1170, 319-1255, 376-8745 PANEL GP-CIRCUIT BREAKER
For full view, you need register
Information:
OPERATOR STATION
CONSOLE GP
Operation and Maintenance Manual
Special Instruction
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
Service Magazine
