274-5997 CYLINDER GP-HYDRAULIC S/N JHJ1-UP PART OF 265-7513 COUPLER GP-QUICK AN ATTACHMENT 329D L EXCAVATOR

HYDRAULIC SYSTEM

CYLINDER GP

0. 274-5997 CYLINDER G
1. 216-6607 CYLINDER G
2. 289-7994 CYLINDER G

DRIVE GP

3. 191-2693 DRIVE GP-S
4. 199-4487 DRIVE GP-S
5. 199-4490 DRIVE GP-S
6. 418-7154 DRIVE GP-S
7. 171-9412 FASTENER G

FILTER GP

8. 158-8987 FILTER & V
9. 158-8987 FILTER & V
0. INFORMATION

EXCAVATOR 329D L EXCAVATOR JHJ
329D L Excavator JHJ00001-UP (MACHINE) POWERED BY C7 Engine SEBP5372 329D L JHJ (2008)

HYDRAULIC SYSTEM

CYLINDER GP

315-4451 CYLINDER GP-BUCKET

357-9766 CYLINDER GP-BUCKET

274-5997 CYLINDER GP-HYDRAULIC

216-6607 CYLINDER GP-STICK

289-7994 CYLINDER GP-STICK

#SEBP53720410

274-5997: CYLINDER GP-HYDRAULIC

CYLINDER GP-HYDRAULIC

274-5997 CYLINDER GP-HYDRAULIC
S/N JHJ1-UP
PART OF 265-7513 COUPLER GP-QUICK
AN ATTACHMENT

i02424203 SEBP5372

2745997 CYLINDER GP-HYDRAULIC Parts scheme

For full view, you need register

Parts for your 329D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	091-5928	[2]	FITTING-GREASE
2.	172-8406	[1]	VALVE GP-CHECK (HYD CYLINDER, QUICK COUPLER)
	2U-5338	[1]	SEAL-O-RING
	9W-3340	[1]	SEAL-O-RING
	107-7640	[1]	SEAL-O-RING

			AVAILABLE REPAIR KIT(S):
	252-5507	[1]	KIT-SEAL (COUPLER CYLINDER)

#SEBP53720411

216-6607: CYLINDER GP-STICK

CYLINDER GP-STICK

216-6607 CYLINDER GP-STICK
S/N JHJ1-UP
150MM (6 IN) BORE X 1870MM (74.8 IN) STROKE. Y-FAMILY
PART OF 216-6606 CYLINDER & SEAL GP-STICK
AN ATTACHMENT

i01854745 SEBP5372

For full view, you need register

Parts for your 329D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7Y-4660	[1]	HEAD
2.	7Y-4669 J	[1]	RING-BACKUP
3.	7Y-4672	[1]	RING-RETAINING
4.	7Y-4695 M	[1]	LOCKNUT (M80X2-THD)
5.	9X-3601 J	[1]	SEAL AS
6.	167-2217 J	[1]	SEAL AS-BUFFER
7.	188-4217 J	[2]	RING
8.	188-4218 J	[1]	RING
9.	216-6608	[1]	CYLINDER AS
10.	5I-8516 J	[1]	RING-SEAL
11.	170-9864 J	[1]	SEAL-U-CUP
12.	165-9290 J	[1]	SEAL-LIP TYPE
13.	188-4216	[1]	PISTON
14.	216-6613	[1]	ROD AS
14A.	186-5477	[1]	BUSHING
15.	095-0929	[2]	RING-RETAINING (EXTERNAL)
16.	095-1633 J	[1]	SEAL-O-RING
17.	103-8378	[1]	RING-RETAINING
18.	103-8379	[1]	RING
19.	103-8380	[1]	STOP
20.	114-0760	[1]	BUSHING
21.	7Y-4673 J	[1]	RING-BACKUP
22.	7Y-4918	[1]	STOP
23.	7Y-5215 M	[8]	BOLT-SOCKET HEAD (M24X3X90-MM)

			AVAILABLE REPAIR KIT(S):
	191-5619 J	[1]	KIT-SEAL
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

#SEBP53720412

289-7994: CYLINDER GP-STICK

CYLINDER GP-STICK

289-7994 CYLINDER GP-STICK
S/N JHJ1-UP
150-MM (5.9-IN) BORE X 1646-MM (64.8-IN) STROKE
PART OF 289-7993 CYLINDER & SEAL GP-STICK
FIELD REPLACEMENT ORDER @@@@@341-2177@@@@@
AN ATTACHMENT

i02691173 SEBP5372

For full view, you need register

Parts for your 329D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	358-8524	[1]	HEAD
2.	7Y-4669 J	[1]	RING-BACKUP
3.	7Y-4695 M	[1]	LOCKNUT (M80X2-THD)
4.	9X-3601 J	[1]	SEAL AS
5.	128-9265 J	[1]	SEAL-BUFFER
6.	188-4216	[1]	PISTON
7.	188-4218 J	[1]	RING
8.	242-6833 J	[1]	RING-SEAL
9.	289-7995	[1]	CYLINDER AS
9A.	235-7770	[1]	BUSHING
10.	289-8000	[1]	ROD AS
10A.	235-7770	[1]	BUSHING
11.	7Y-4672	[1]	RING-RETAINING
12.	165-9290 J	[1]	SEAL-LIP TYPE
13.	170-9864 J	[1]	SEAL-U-CUP
14.	188-4217 J	[2]	RING
15.	095-0929	[2]	RING-RETAINING (EXTERNAL)
16.	095-1633 J	[1]	SEAL-O-RING
17.	103-8378	[1]	RING-RETAINING
18.	103-8379	[1]	RING
19.	103-8380	[1]	STOP
20.	114-0760	[1]	BUSHING
21.	7Y-4673 J	[1]	RING-BACKUP
22.	7Y-4918	[1]	STOP
23.	7Y-5215 M	[8]	BOLT-SOCKET HEAD (M24X3X90-MM)

			AVAILABLE REPAIR KIT(S):
	242-6840 J	[1]	KIT-SEAL (STICK CYLINDER)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

#SEBP53720413

191-2693: DRIVE GP-SWING

DRIVE GP-SWING

191-2693 DRIVE GP-SWING -WITHOUT MOTOR
S/N JHJ1-UP
PART OF 199-4487, 199-4490 DRIVE GP-SWING

i02834295 SEBP5372

For full view, you need register

Parts for your 329D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4I-7466	[4]	GEAR-PLANETARY (23-TEETH)
2.	227-6221 C	[1]	BREATHER AS (SWING DRIVE)
2A.	4H-6112	[1]	BREATHER (SWING DRIVE)
2B.	227-6215	[1]	BOSS (1/4-18-THD)
2C.	267-6785	[1]	PIPE
3.	6V-7238	[1]	VALVE-SHUTOFF (HYDRAULIC OIL)
4.	7I-7728	[1]	CARRIER-PLANETARY
5.	7Y-0225	[3]	SHAFT-PLANETARY
6.	7Y-1434	[2]	SPACER (40X69.5X6-MM THK)
7.	093-1730	[2]	RING-RETAINING
8.	093-1731	[1]	RING-RETAINING
9.	094-0611	[6]	WASHER (47.3X76X1-MM THK)
10.	094-1528	[8]	WASHER (53X84X1-MM THK)
11.	136-2940	[1]	BEARING
12.	096-2653	[1]	RING-RETAINING
13.	136-2904	[1]	BEARING
14.	114-1383	[4]	SHAFT-PLANETARY
15.	114-1398	[1]	GAUGE-OIL LEVEL (SWING DRIVE)
16.	114-1399	[1]	PIPE-GAUGE
17.	114-1401	[1]	COVER-HOUSING
18.	191-2696	[1]	CAGE
19.	135-9044	[2]	SEAL-LIP TYPE
20.	169-5617	[1]	GEAR-SUN (18-TEETH)
21.	169-5618	[3]	GEAR-PLANETARY (27-TEETH)
22.	191-2579	[1]	CARRIER-PLANETARY
23.	171-9280	[1]	GEAR-RING (72-TEETH)
24.	191-2694	[1]	SHAFT-PINION
25.	191-2695	[1]	HOUSING
26.	171-9283	[1]	GEAR-SUN (24-TEETH)
27.	171-9375	[1]	SEAL-O-RING
28.	191-2697	[1]	SPACER (110X140X90.1-MM THK)
29.	095-0891	[7]	PIN-SPRING
30.	3K-0360	[1]	SEAL-O-RING
31.	8J-8879	[1]	SEAL-O-RING
32.	7Y-0252	[3]	BEARING AS-ROLLER
33.	191-2513	[8]	BEARING AS-ROLLER
34.	8T-4183 M	[8]	BOLT (M12X1.75X40-MM)
35.	8T-4223	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
36.	8T-6385 M	[16]	BOLT (M16X2X180-MM)
37.	9X-8257	[16]	WASHER (17.5X30X3.5-MM THK)

	1U-8846 BF		SEALANT-GASKET
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	F		NOT SHOWN
	M		METRIC PART

#SEBP53720414

199-4487: DRIVE GP-SWING

DRIVE GP-SWING

199-4487 DRIVE GP-SWING
S/N JHJ1-UP
PART OF 171-9410 POWER TRAIN AR

i01561175 SEBP5372

For full view, you need register

Parts for your 329D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	191-2693 Y	[1]	DRIVE GP-SWING (WITHOUT MOTOR)
2.	179-9774 Y	[1]	MOTOR & MTG GP-SWING
	Y		SEPARATE ILLUSTRATION

#SEBP53720415

199-4490: DRIVE GP-SWING

DRIVE GP-SWING

199-4490 DRIVE GP-SWING
S/N JHJ1-UP

i01988670 SEBP5372

For full view, you need register

Parts for your 329D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
	191-2693 Y	[1]	DRIVE GP-SWING (WITHOUT MOTOR)
	Y		SEPARATE ILLUSTRATION

#SEBP53720416

418-7154: DRIVE GP-SWING

DRIVE GP-SWING

418-7154 DRIVE GP-SWING -WITHOUT MOTOR
S/N JHJ1-UP
AN ATTACHMENT

i06708615 SEBP5372

For full view, you need register

Parts for your 329D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-7238	[1]	VALVE-SHUTOFF (HYDRAULIC OIL)
2.	094-0611	[14]	WASHER (47.3X76X1-MM THK)
3.	114-1398	[1]	GAUGE-OIL LEVEL (SWING DRIVE)
4.	114-1399	[1]	PIPE-GAUGE
5.	191-2694	[1]	SHAFT-PINION
6.	191-2696	[1]	CAGE
7.	227-6221	[1]	BREATHER AS (SWING DRIVE)
	4H-6112	[1]	BREATHER (SWING DRIVE)
	227-6215	[1]	BOSS (1/4-18-THD)
	267-6785	[1]	PIPE
8.	296-6268	[3]	BEARING AS-ROLLER
9.	418-7160	[1]	GEAR-SUN (13-TEETH, 18-TEETH)
10.	418-7161	[1]	GEAR-SUN (23-TEETH)
11.	418-7162	[3]	GEAR-PLANETARY (25-TEETH)
12.	418-7163	[4]	GEAR-PLANETARY (22-TEETH)
13.	418-7164	[1]	GEAR-RING (69-TEETH)
14.	418-7167	[4]	SHAFT
15.	418-7196	[1]	HOUSING
16.	418-7232	[1]	COVER-HOUSING
17.	418-7233	[8]	BEARING AS-ROLLER
18.	418-7234	[1]	CARRIER AS
19.	418-7235	[1]	CARRIER-PLANETARY
20.	422-1352	[2]	SPACER (49.6X69.5X6-MM THK)
21.	422-4054	[3]	RING-RETAINING
22.	451-2182	[50]	WASHER-HARD (13.5X25.5X3-MM THK)
23.	453-3447 M	[20]	BOLT (M12X1.75X40-MM)
24.	093-1730	[2]	RING-RETAINING
25.	095-0670 M	[30]	BOLT (M12X1.75X45-MM)
26.	509-6676	[4]	PIN-SPRING
27.	096-2653	[1]	RING-RETAINING
28.	135-9044	[2]	SEAL-LIP TYPE
29.	136-2904	[1]	BEARING
30.	136-2940	[1]	BEARING
31.	191-2697	[1]	SPACER (110X140X90.1-MM THK)
32.	3K-0360	[1]	SEAL-O-RING
33.	8J-8879	[1]	SEAL-O-RING

	1U-8846 BF		SEALANT-GASKET
	B		USE AS REQUIRED
	F		NOT SHOWN
	M		METRIC PART

#SEBP53720417

171-9412: FASTENER GP-SWING & FINAL DR

FASTENER GP-SWING & FINAL DR

171-9412 FASTENER GP-SWING & FINAL DR
S/N JHJ1-UP
PART OF 171-9410 POWER TRAIN AR

i01561181 SEBP5372

1719412 FASTENER GP-SWING & FINAL DR Parts scheme

For full view, you need register

Parts for your 329D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-4141 M	[40]	BOLT (M20X2.5X70-MM)
2.	7X-2576 M	[16]	BOLT (M24X3X70-MM)
3.	8T-4123	[40]	WASHER (3.62X5.75X0.375-MM THK)
4.	8T-4167	[16]	WASHER-HARD (26X44X4-MM THK)
5.	096-4755	[1]	PIN
6.	1U-8846 B		SEALANT-GASKET
7.	2B-7561	[2]	CORK
8.	5P-0767 E		HOSE (90-CM)
9.	5D-1026	[1]	CLAMP-BAND
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP53720418

158-8987: FILTER & VALVE GP-PILOT

FILTER & VALVE GP-PILOT

158-8987 FILTER & VALVE GP-PILOT -HYDRAULIC OIL
S/N JHJ1-UP
PART OF 227-0566 TANK & FILTER GP-HYDRAULIC
Type 2

i07000301 SEBP5372

1588987 FILTER & VALVE GP-PILOT Parts scheme

For full view, you need register

Parts for your 329D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5I-8670	[1]	FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC, PILOT)
2.	215-4909	[1]	VALVE GP-PILOT RELIEF (HYDRAULIC FILTER)
2A.	095-1584	[1]	SEAL-O-RING
2B.	095-1590	[1]	SEAL-O-RING
2C.	095-1596	[1]	SEAL-O-RING

			PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY

#SEBP53720419

158-8987: FILTER & VALVE GP-PILOT

FILTER & VALVE GP-PILOT

158-8987 FILTER & VALVE GP-PILOT -HYDRAULIC OIL
S/N JHJ1-UP
PART OF 227-0566 TANK & FILTER GP-HYDRAULIC
Type 1

i01408164 SEBP5372

For full view, you need register

Parts for your 329D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5I-8670 J	[1]	FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC, PILOT)
2.	215-4909	[1]	VALVE GP-PILOT RELIEF (HYDRAULIC FILTER)
2A.	095-1584	[1]	SEAL-O-RING
2B.	095-1590	[1]	SEAL-O-RING
2C.	095-1596	[1]	SEAL-O-RING
3.	126-1813 AL	[1]	FILTER-OIL (ULTRA HIGH EFFICIENCY)(HYDRAULIC, PILOT)
4.	103-8236 AL	[1]	RING

			PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
	A		NOT PART OF THIS GROUP
	J		FOR USE WITH FILTER BASE WITH M45X2-THD)
	L		ALTERNATE DESIGN-FOR USE WITH FILTER BASE WITH 2-12 THD

Information:

HYDRAULIC SYSTEM

CYLINDER GP

Special Instruction

Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}

Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Technical Information Bulletin

Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}

Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}

Specifications

Bucket Cylinder
325D and 329D Excavators and 325D Material Handler Machine System Specifications

Boom Lines
325D and 329D Excavators and 325D Material Handler Machine System Specifications

Boom Cylinder Lines
325D and 329D Excavators and 325D Material Handler Machine System Specifications

Bucket Cylinder
325D and 329D Excavators and 325D Material Handler Machine System Specifications

Boom Cylinder
325D and 329D Excavators and 325D Material Handler Machine System Specifications

Stick Cylinder
325D and 329D Excavators and 325D Material Handler Machine System Specifications

Boom Cylinder Lines - Load Control Valve
325D and 329D Excavators and 325D Material Handler Machine System Specifications

Bucket Cylinder
325D and 329D Excavators and 325D Material Handler Machine System Specifications

Boom Lines
325D and 329D Excavators and 325D Material Handler Machine System Specifications

Stick Cylinder
325D and 329D Excavators and 325D Material Handler Machine System Specifications

Tool Operating Manual

Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}

1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}

Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}

Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}

Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}

Systems Operation

Cylinders (Boom, Stick and Bucket)
325D and 329D Excavators Hydraulic System

Reuse And Salvage Guidelines

Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}

Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}

Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}

Contamination Control Guidelines

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Applied Failure Analysis

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Testing and Adjusting

Cylinder Speed - Check
325D and 329D Excavators Hydraulic System

Cylinder Drift - Check - Loaded Bucket
325D and 329D Excavators Hydraulic System

Cylinder Speed - Test and Adjust - 325D/329D
320D, 320D2, 324D, 325D, 329D, 330D and 336D Excavators Long Reach Front

Cylinder Drift - Check - Empty Bucket
325D and 329D Excavators Hydraulic System

Bench Test Procedures

Disassembly and Assembly

Bucket Cylinder - Remove and Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems

Boom Cylinder - Remove and Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems

Stick Cylinder - Remove and Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems

Service Magazine

Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04

Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}

Correct Ring Orientation Provides Smooth Hydraulic Cylinder Operation {5456, 5458}
2009/03/16

A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}
2012/05/18

Improved Pin Assemblies and Bushings for the Boom, the Stick, and the Bucket Pin Joints Are Now Used on Certain Excavators and Mobile Hydraulic Power Units {5456, 5457, 5458, 6501, 6502, 6513}
2012/12/19

Improved Seals for Implement Cylinders are Now Used on Certain Excavators and Mobile Hydraulic Power Units {5456, 5457}
2013/01/28

Hydraulic Cylinder Piston Assembly for Certain 320D/320E to 329D/329E Excavators {5456, 5457, 5458}
Hydraulic Cylinder Piston Assembly for Certain 320D/320E to 329D/329E Excavators {5456, 5457, 5458}

Cat® Reman Announces the Availability of Remanufactured Hydraulic Rods and Cylinders for Certain Cat Machines {7562}
2015/08/21

Caterpillar Parts SIS Catalog 329D L :

357-9766 CYLINDER GP-BUCKET

315-4451 CYLINDER GP-BUCKET

289-8004 CYLINDER GP-BUCKET

283-6118 CYLINDER GP-BUCKET

350-0568 CYLINDER GP-BOOM

295-9398 CYLINDER GP-BOOM

341-2177 CYLINDER & SEAL GP-STICK

289-7993 CYLINDER & SEAL GP-STICK

216-6607 CYLINDER GP-STICK

289-7994 CYLINDER GP-STICK

191-2693 DRIVE GP-SWING

199-4487 DRIVE GP-SWING

199-4490 DRIVE GP-SWING

418-7154 DRIVE GP-SWING

171-9412 FASTENER GP-SWING & FINAL DR

158-8987 FILTER & VALVE GP-PILOT

Truck sale:

89,812 USD

Caterpillar 329DL, Construction
- Crawler Excavators
HASTINGS DEERING (AUSTRALIA)
Australia

Caterpillar 329DL, Construction
- Crawler Excavators
CATERPILLAR LEASING CHILE S.A.
Chile

85,614

Caterpillar 329DL, Construction
- Crawler Excavators
WESTRAC PTY. LTD. (NSW)
Australia

250,000

Caterpillar 329DL, Construction
- Crawler Excavators
GENTRAC
Guatemala

On Request

Caterpillar 329DL, Construction
- Crawler Excavators
MOHAMED ABDULRAHMAN AL-BAHAR
Kuwait