AVSPARE.COM
parts catalog

202-3301 COVER GP-CYLINDER BLOCK -CRANKCASE S/N THX16780-UP PART OF 240-1861 ENGINE AR-COMPLETE 336D L




BASIC ENGINE

CYLINDER BLOCK GP
 

#SEBP53740040
 

202-3301: COVER GP-CYLINDER BLOCK

202-3301 COVER GP-CYLINDER BLOCK -CRANKCASE
S/N THX16780-UP
PART OF 240-1861 ENGINE AR-COMPLETE
i01592478 SEBP5374
  For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 213-2411 [1] COVER  
2. 213-2410 [1] GASKET  
3. 240-0041 [1] BREATHER AS (CRANKCASE)  
4. 3E-8005 M [1] BOLT (M8X1.25X160-MM)  
5. 6V-3918 M [2] BOLT (M8X1.25X50-MM)  
6. 6V-3940 M [9] BOLT (M8X1.25X25-MM)  
7. 9F-4446 [1] SEAL-O-RING (CRANKCASE BREATHER)  
8. 9M-1974 [11] WASHER-HARD (8.8X16X2-MM THK)  
9. 5N-4185 [1] WASHER-SPECIAL  
  M   METRIC PART
 

#SEBP53740041
 

127-5728: COVER GP-FLYWHEEL HOUSING

127-5728 COVER GP-FLYWHEEL HOUSING
S/N THX16780-UP
PART OF 240-1861 ENGINE AR-COMPLETE
i00517284 SEBP5374
  For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 483-0773 [1] COVER  
 

#SEBP53740042
 

118-1727: COVER GP-FRONT HOUSING

118-1727 COVER GP-FRONT HOUSING -ACCESSORY DRIVE
S/N THX16780-UP
REQUIRED ON ENGINES WITHOUT FACTORY INSTALLED AIR COMPRESSOR
PART OF 240-1861 ENGINE AR-COMPLETE
i00480574 SEBP5374
  For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
2. 6V-5696 M [2] BOLT (M12X1.75X80-MM)  
3. 4W-2026 [1] COVER  
4. 135-9819 [1] SEAL-INTEGRAL  
5. 6V-8149 M [2] NUT (M12X1.75-THD)  
  M   METRIC PART
 

#SEBP53740043
 

211-3285: COVER GP-FRONT HOUSING

211-3285 COVER GP-FRONT HOUSING
S/N THX16780-UP
PART OF 240-1861 ENGINE AR-COMPLETE
i01593478 SEBP5374
  For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-2099 M [2] STUD (M8X1.25X52.75-MM)  
2. 7C-1445 [1] COVER  
3. 166-1776 [1] COVER AS-FRONT  
3A. 126-1757 [2] WASHER (10.85X19.3X1.27-MM THK)  
3B. 136-0822 [2] STUD  
4. 166-1781 [1] GASKET  
5. 061-9455 [1] SEAL-O-RING  
6. 5C-7261 M [2] NUT (M8X1.25-THD)  
7. 6V-2317 M [10] BOLT (M8X1.25X30-MM)  
8. 8T-0100 M [2] BOLT (M8X1.25X60-MM)  
9. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
 

#SEBP53740044
 

235-8174: COVER GP-VALVE MECHANISM

235-8174 COVER GP-VALVE MECHANISM
S/N THX16780-27257
PART OF 240-1861 ENGINE AR-COMPLETE
FOR USE WITH @@@@@233-0423@@@@@
i02637546 SEBP5374
  For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 263-7825 C [1] COVER GP-VALVE MECHANISM  
1A. 285-4106 [1] SEAL-VALVE COVER  
2. 271-2418 [1] BASE GP-VALVE COVER  
2A. 268-3490 [1] SEAL-VALVE COVER (VALVE MECHANISM BASE)  
3. 227-4531 [1] CAP AS-ENGINE OIL FILLER  
3A. 7F-8268 [1] SEAL-O-RING  
4. 273-2838 C [11] SLEEVE-SPACER  
   
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP53740045
 

235-8174: COVER GP-VALVE MECHANISM

235-8174 COVER GP-VALVE MECHANISM
S/N THX27258-UP
PART OF 240-1861 ENGINE AR-COMPLETE
FOR USE WITH @@@@@233-0423@@@@@
i04032542 SEBP5374
  For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 358-7872 C [1] COVER GP-VALVE MECHANISM  
1A. 285-4106 [1] SEAL-VALVE COVER  
2. 353-6988 [1] BASE GP-VALVE COVER  
2A. 268-3490 [1] SEAL-VALVE COVER (VALVE MECHANISM BASE)  
3. 227-4531 [1] CAP AS-ENGINE OIL FILLER  
3A. 7F-8268 [1] SEAL-O-RING  
4. 358-7876 C [11] SLEEVE-SPACER  
   
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP53740046
 

164-6148: CRANKSHAFT GP

164-6148 CRANKSHAFT GP
S/N THX16780-UP
PART OF 229-2665, 384-3426 ENGINE AR-CORE
i01176707 SEBP5374
  For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 151-2939 J [7] BEARING-MAIN (STANDARD)  
  282-1771 AB [7] BEARING-MAIN (0.25-MM US)  
  282-1772 AB [7] BEARING-MAIN (0.51-MM US)  
2. 261-1544 [1] CRANKSHAFT AS  
2A. 1B-8705 [1] KEY-WOODRUFF  
2B. 2W-8147 [1] GEAR (50-TEETH)  
2C. 9Y-0810 [1] SLEEVE-WEAR  
3. 246-3150 J [2] PLATE-THRUST  
   
    AVAILABLE REPAIR KIT(S):
  243-6716 AJ KIT-BEARING (STANDARD)  
    (INCLUDES A COMPLETE SET OF MAIN BEARINGS & THRUST PLATES)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP53740047
 

325-3915: CYLINDER BLOCK AS

325-3915 CYLINDER BLOCK AS
S/N THX16780-UP
PART OF 517-1908 CYLINDER BLOCK AS
i03235740 SEBP5374
  For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1026 [2] PLUG-CUP  
2. 3B-0623 [2] PLUG-CUP  
3. 4F-5695 [4] PLUG-CUP  
4. 175-0454 M [14] BOLT (M16X2X160-MM)  
5. 203-5805 [2] BUSHING  
6. 203-6090 [1] BUSHING  
7. 212-7002 [7] CAP-BEARING  
8. 216-5586 [1] BUSHING (CAMSHAFT)  
9. 9X-8268 [14] WASHER (17.5X30X3.5-MM THK)  
  M   METRIC PART
 

#SEBP53740048
 

517-1908: CYLINDER BLOCK AS

517-1908 CYLINDER BLOCK AS
S/N THX16780-UP
PART OF 161-3406 CYLINDER BLOCK GP
i06952578 SEBP5374
  For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 167-0024 [6] SEAL-LINER  
2. 469-5312 [6] LINER-CYLINDER  
3. 325-3915 Y [1] CYLINDER BLOCK AS  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP53740049
 

161-3406: CYLINDER BLOCK GP

161-3406 CYLINDER BLOCK GP
S/N THX16780-UP
PART OF 229-2665, 384-3426 ENGINE AR-CORE
i01842215 SEBP5374
  For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-0519 [1] PLUG-CUP  
2. 517-1908 CY [1] CYLINDER BLOCK AS  
3. 1W-8407 [2] SLEEVE  
4. 396-0393 [1] PLUG AS  
  214-7566 [1] SEAL-O-RING  
  360-3677 [1] PLUG (7/16-20-THD)  
5. 4G-4972 [1] SEAL-O-RING  
6. 6V-3538 [2] DOWEL  
7. 7N-5683 [2] DOWEL  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Cylinder Block - Inspect
C9 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
C9 Engines for Caterpillar Built Machines
Main Bearings - Inspect
C9 Engines for Caterpillar Built Machines
Troubleshooting
Cylinder Is Noisy
C9 Engine for the 816F Series 2 Landfill Compactor, the 815F Series 2 Soil Compactor, and the 814F Series 2 Wheel Dozer
Disassembly and Assembly
Bearing Clearance - Check
C9 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C9 Engines for Caterpillar Built Machines
Cylinder Liner - Remove
C9 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
C9 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
C9 Engines for Caterpillar Built Machines
Cylinder Liner - Install
C9 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
C9 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
C9 Engines for Caterpillar Built Machines
Cylinder Block Cover - Remove and Install
C9 Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog 336D L :

Truck sale:

 
Caterpillar 336D L
- Crawler Excavators
GREGORY POOLE EQUIPMENT CO.
74,767 
Caterpillar 336DL, Crawler Excavators, Construction
- Crawler Excavators
WILLIAM ADAMS PTY. LTD.
 
31,260 
Caterpillar 336DL, Crawler Excavators, Construction
- Crawler Excavators
SIME DARBY INDUSTRIAL SDN BHD
119,059 
Caterpillar 336DL, Crawler Excavators, Construction
- Crawler Excavators
EMPIRE MACHINERY
57,256 
Caterpillar 336DL, Crawler Excavators, Construction
- Crawler Excavators
WESTRAC PTY. LTD. (NSW)
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.