AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

290-9236 BOOM GP S/N J2F1-UP 6.5-M (21.3-FT) PART OF 302-7339, 388-3113 BOOM AR-1 PIECE LONG AN ATTACHMENT 336D L


IMPLEMENTS
BOOM GP
LINES GP-GREASE
LINKAGE GP

EXCAVATOR 336D L EXCAVATOR J2F
 336D L Excavator J2F00001-UP (MACHINE) POWERED BY C9 Engine SEBP5375 336D L J2F   (2008)

IMPLEMENTS

BOOM GP
302-7339 BOOM AR-1 PIECE LONG
314-3615 BOOM AR-1 PIECE LONG
388-3113 BOOM AR-1 PIECE LONG
299-9539 BOOM AR-MASS
388-3114 BOOM AR-MASS
BOOM GP
290-9236 BOOM GP
BOOM GP
290-9248 BOOM GP
BOOM GP
290-9248 BOOM GP
BOOM GP
290-9248 BOOM GP
BOOM GP
324-1093 BOOM GP
 

#SEBP53750820
 

290-9236: BOOM GP

290-9236 BOOM GP
S/N J2F1-UP
6.5-M (21.3-FT)
PART OF 302-7339, 388-3113 BOOM AR-1 PIECE LONG
AN ATTACHMENT
i02690826 SEBP5375
2909236 BOOM GP Parts scheme
  For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 093-0074 B [1] SHIM (1-MM THK)  
2. 093-0349 [1] WASHER (22X60X6-MM THK)  
3. 166-1489 [2] SHIM (2-MM THK)  
4. 192-8321 [1] PIN  
5. 201-2771 [1] WASHER (26X90X8-MM THK)  
6. 251-2547 [1] PIN AS  
7. 290-9237 [1] BOOM & BEARING AS  
7A. 236-8561 [2] BUSHING  
    -OR-
  228-5621 [2] BUSHING  
7B. 101-2277 [5] PLATE  
7C. 113-2276 [1] MANIFOLD  
7D. 117-5604 M [16] STUD (M10X1.5X23-MM)  
7E. 178-0711 [2] BLOCK-MOUNTING  
7F. 7Y-2579 [2] BAR  
8. 093-0366 [1] SPACER (93X130X12-MM THK)  
9. 103-5246 [1] SPACER (123X150X14-MM THK)  
10. 113-2963 [1] PIN AS  
11. 147-3957 B [1] SHIM (0.5-MM THK)  
12. 166-1490 [2] SHIM (2-MM THK)  
13. 166-1498 [2] SEAL-LIP TYPE  
14. 4I-4978 [2] SPACER (113X150X8-MM THK)  
15. 4I-5005 [2] PLATE  
16. 7X-2573 M [1] BOLT (M24X3X40-MM)  
17. 8T-4123 [1] WASHER (3.62X5.75X0.375-MM THK)  
18. 8T-4167 [1] WASHER-HARD (26X44X4-MM THK)  
19. 8T-4779 M [6] BOLT (M16X2X35-MM)  
20. 8T-4780 M [1] BOLT (M20X2.5X30-MM)  
21. 9X-8257 [6] WASHER (17.5X30X3.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP53750821
 

290-9248: BOOM GP

290-9248 BOOM GP
S/N J2F1-UP
6.18-M (20-FT)
PART OF 299-9539 BOOM AR-MASS
Type 1
AN ATTACHMENT
i02725938 SEBP5375
2909248 BOOM GP Parts scheme
  For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 093-0074 [1] SHIM (1-MM THK)  
2. 093-0349 [1] WASHER (22X60X6-MM THK)  
3. 166-1489 [2] SHIM (2-MM THK)  
4. 192-8321 [1] PIN  
5. 201-2771 [1] WASHER (26X90X8-MM THK)  
6. 251-2547 [1] PIN AS  
7. 290-9249 [1] BOOM & BEARING AS  
  228-5621 [2] BUSHING  
8. 093-0366 [1] SPACER (93X130X12-MM THK)  
9. 103-5246 [1] SPACER (123X150X14-MM THK)  
10. 113-2963 [1] PIN AS  
11. 147-3957 B [1] SHIM (0.5-MM THK)  
12. 166-1490 [2] SHIM (2-MM THK)  
13. 166-1498 [2] SEAL-LIP TYPE  
14. 4I-4978 [2] SPACER (113X150X8-MM THK)  
15. 4I-5005 [2] PLATE  
16. 7X-2573 M [1] BOLT (M24X3X40-MM)  
17. 8T-4123 [1] WASHER (3.62X5.75X0.375-MM THK)  
18. 8T-4167 [1] WASHER-HARD (26X44X4-MM THK)  
19. 8T-4779 M [6] BOLT (M16X2X35-MM)  
20. 8T-4780 M [1] BOLT (M20X2.5X30-MM)  
21. 9X-8257 [6] WASHER (17.5X30X3.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP53750822
 

290-9248: BOOM GP

290-9248 BOOM GP
S/N J2F1-UP
6.18-M (20-FT)
PART OF 299-9539 BOOM AR-MASS
Type 2
AN ATTACHMENT
i04593411 SEBP5375
2909248 BOOM GP Parts scheme
  For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 093-0074 [1] SHIM (1-MM THK)  
2. 093-0349 [1] WASHER (22X60X6-MM THK)  
3. 166-1489 [2] SHIM (2-MM THK)  
4. 192-8321 [1] PIN  
5. 201-2771 [1] WASHER (26X90X8-MM THK)  
6. 251-2547 [1] PIN AS  
7. 382-6465 C [1] BOOM & BEARING AS  
  228-5621 [2] BUSHING  
8. 093-0366 [1] SPACER (93X130X12-MM THK)  
9. 103-5246 [1] SPACER (123X150X14-MM THK)  
10. 113-2963 [1] PIN AS  
11. 147-3957 B [1] SHIM (0.5-MM THK)  
12. 166-1490 [2] SHIM (2-MM THK)  
13. 166-1498 [2] SEAL-LIP TYPE  
14. 4I-4978 [2] SPACER (113X150X8-MM THK)  
15. 4I-5005 [2] PLATE  
16. 7X-2573 M [1] BOLT (M24X3X40-MM)  
17. 8T-4123 [1] WASHER (3.62X5.75X0.375-MM THK)  
18. 8T-4167 [1] WASHER-HARD (26X44X4-MM THK)  
19. 8T-4779 M [6] BOLT (M16X2X35-MM)  
20. 8T-4780 M [1] BOLT (M20X2.5X30-MM)  
21. 9X-8257 [6] WASHER (17.5X30X3.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP53750823
 

290-9248: BOOM GP

290-9248 BOOM GP
S/N J2F1-UP
6.18-M (20-FT)
PART OF 299-9539, 388-3114 BOOM AR-MASS
Type 3
AN ATTACHMENT
i04593776 SEBP5375
2909248 BOOM GP Parts scheme
  For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 093-0074 BC [1] SHIM (1-MM THK)  
2. 093-0349 [1] WASHER (22X60X6-MM THK)  
3. 166-1489 [2] SHIM (2-MM THK)  
4. 192-8321 [1] PIN  
5. 201-2771 [1] WASHER (26X90X8-MM THK)  
6. 251-2547 [1] PIN AS  
7. 290-9249 C [1] BOOM & BEARING AS  
  236-8561 [2] BUSHING  
8. 093-0366 [1] SPACER (93X130X12-MM THK)  
9. 103-5246 [1] SPACER (123X150X14-MM THK)  
10. 113-2963 [1] PIN AS  
11. 147-3957 B [1] SHIM (0.5-MM THK)  
12. 166-1490 [2] SHIM (2-MM THK)  
13. 166-1498 [2] SEAL-LIP TYPE  
14. 4I-4978 [2] SPACER (113X150X8-MM THK)  
15. 4I-5005 [2] PLATE  
16. 7X-2573 M [1] BOLT (M24X3X40-MM)  
17. 8T-4123 [1] WASHER (3.62X5.75X0.375-MM THK)  
18. 8T-4167 [1] WASHER-HARD (26X44X4-MM THK)  
19. 8T-4779 M [6] BOLT (M16X2X35-MM)  
20. 8T-4780 M [1] BOLT (M20X2.5X30-MM)  
21. 9X-8257 [6] WASHER (17.5X30X3.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP53750824
 

324-1093: BOOM GP

324-1093 BOOM GP -ACCUGRADE
S/N J2F1-UP
6.5-M (21.3-FT)
PART OF 314-3615 BOOM AR-1 PIECE LONG
AN ATTACHMENT
i03144563 SEBP5375
3241093 BOOM GP Parts scheme
  For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 093-0074 [1] SHIM (1-MM THK)  
2. 093-0349 [1] WASHER (22X60X6-MM THK)  
3. 166-1489 [2] SHIM (2-MM THK)  
4. 192-8321 [1] PIN  
5. 201-2771 [1] WASHER (26X90X8-MM THK)  
6. 251-2547 [1] PIN AS  
7. 324-1094 [1] BOOM & BEARING AS  
7A. 236-8561 [2] BUSHING  
8. 093-0366 [1] SPACER (93X130X12-MM THK)  
9. 103-5246 [1] SPACER (123X150X14-MM THK)  
10. 113-2963 [1] PIN AS  
11. 147-3957 B [1] SHIM (0.5-MM THK)  
12. 166-1490 [2] SHIM (2-MM THK)  
13. 166-1498 [2] SEAL-LIP TYPE  
14. 4I-4978 [2] SPACER (113X150X8-MM THK)  
15. 4I-5005 [2] PLATE  
16. 7X-2573 M [1] BOLT (M24X3X40-MM)  
17. 8T-4123 [1] WASHER (3.62X5.75X0.375-MM THK)  
18. 8T-4167 [1] WASHER-HARD (26X44X4-MM THK)  
19. 8T-4779 M [6] BOLT (M16X2X35-MM)  
20. 8T-4780 M [1] BOLT (M20X2.5X30-MM)  
21. 9X-8257 [6] WASHER (17.5X30X3.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP53750825
 

192-8320: LINES GP-GREASE

192-8320 LINES GP-GREASE -BOOM, BOOM CYLS, STICK CYL
S/N J2F1-UP
PART OF 302-7339, 314-3615, 388-3113 BOOM AR-1 PIECE LONG
FOR USE WITH 6.5-M (21.3-FT) BOOM
AN ATTACHMENT
i01593423 SEBP5375
1928320 LINES GP-GREASE Parts scheme
  For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [5] FITTING-GREASE (1/8-27 PTF)  
2. 5K-9243 [2] ELBOW-FLARED  
3. 134-9137 [1] HOSE AS  
4. 141-3538 [1] HOSE AS  
    (EACH HOSE AS INCLUDES)
  105-6431 [1] CONNECTOR  
5. 166-1579 [4] CLIP  
6. 294-1455 I [1] HOSE AS  
6A. 105-6431 [1] CONNECTOR  
7. 212-2829 [1] TUBE AS  
8. 212-2830 [1] TUBE AS  
9. 033-8248 [5] CLIP (LOOP)  
10. 6L-3616 [2] CONNECTOR  
11. 8M-2772 [2] CLIP (LOOP)  
12. 8T-4121 [11] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4133 M [6] NUT (M10X1.5-THD)  
14. 8T-4191 M [5] BOLT (M10X1.5X16-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP53750826
 

201-2816: LINES GP-GREASE

201-2816 LINES GP-GREASE -BOOM, BOOM CYLS, STICK CYL
S/N J2F1-UP
PART OF 299-9539, 388-3114 BOOM AR-MASS
FOR USE WITH 6.18-M (20-FT) BOOM
AN ATTACHMENT
i01643830 SEBP5375
2012816 LINES GP-GREASE Parts scheme
  For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [5] FITTING-GREASE (1/8-27 PTF)  
2. 5K-9243 [2] ELBOW-FLARED  
3. 134-9137 [1] HOSE AS  
4. 141-3538 [1] HOSE AS  
5. 154-0690 I [1] HOSE AS  
    (EACH HOSE AS INCLUDES)
  105-6431 [1] CONNECTOR  
6. 166-1579 [3] CLIP  
7. 212-2829 [1] TUBE AS  
8. 212-2830 [1] TUBE AS  
9. 033-8248 [4] CLIP (LOOP)  
10. 6L-3616 [2] CONNECTOR  
11. 8M-2772 [2] CLIP (LOOP)  
12. 8T-4121 [9] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4133 M [5] NUT (M10X1.5-THD)  
14. 8T-4191 M [4] BOLT (M10X1.5X16-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP53750827
 

388-1430: LINKAGE AR

388-1430 LINKAGE AR -TB1-FAMILY, WITH LIFTING EYE
S/N J2F1-UP
PART OF 389-0309 LINKAGE AR-FRONT, 389-0305, 389-0310, 389-0315 OPTION AR-LINKAGE
AN ATTACHMENT
i04666809 SEBP5375
  For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  357-9782 Y [1] CYLINDER & LINES GP-BUCKET  
  251-2651 Y [1] LINKAGE GP-BUCKET (TB-FAMILY, WITH LIFTING EYE)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP53750828
 

290-1825: LINKAGE AR-BUCKET

290-1825 LINKAGE AR-BUCKET -DB-FAMILY, WITH LIFTING EYE
S/N J2F1-UP
PART OF 337-9014, 337-9016, 384-3503, 384-3515, 384-4601 OPTION AR-LINKAGE
AN ATTACHMENT
i02723827 SEBP5375
  For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  289-8010 Y [1] CYLINDER & LINES GP-BUCKET  
  236-8415 Y [1] LINKAGE GP-BUCKET (DB-FAMILY, WITH LIFTING EYE)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP53750829
 

290-1826: LINKAGE AR-BUCKET

290-1826 LINKAGE AR-BUCKET -TB1-FAMILY, WITH LIFTING EYE
S/N J2F1-UP
PART OF 377-9881, 378-6524, 379-3494, 384-3699 OPTION AR-LINKAGE
AN ATTACHMENT
i02718078 SEBP5375
  For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  289-8039 Y [1] CYLINDER & LINES GP-BUCKET  
  251-2651 Y [1] LINKAGE GP-BUCKET (TB-FAMILY, WITH LIFTING EYE)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Boom, Stick and Bucket Operation
330D and 336D Excavators
Boom and Stick Linkage - Lubricate
330D and 336D Excavators
Boom/Stick/Bucket Combinations
330D and 336D Excavators
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PIN ASSEMBLIES ON CERTAIN 330D AND 336D EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PIN ASSEMBLIES ON CERTAIN 330D AND 336D EXCAVATORS
Service Letter-Americas
Specifications
Boom - 6.2 m (20.28 ft)
330D and 336D Excavators Machine System Specifications
Boom - 6.5 m (21.33 ft)
330D and 336D Excavators Machine System Specifications
Disassembly and Assembly
Boom Bearings and Seals - Remove and Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems
Boom - Remove
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems
Boom - Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems
Service Magazine
Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}
2012/05/18
An Improvement has been Made to Reduce the Amount of Radial Play of the Front Linkage Pin on Certain Excavators {6501, 6502, 6513}
2010/12/08
Improved Pin Assemblies and Bushings for the Boom, the Stick, and the Bucket Pin Joints Are Now Used on Certain Excavators and Mobile Hydraulic Power Units {5456, 5457, 5458, 6501, 6502, 6513}
2012/12/19
A New Plate is Now Used for the Boom As on Certain Excavators and Mobile Hydraulic Power Units {6501}
2011/04/19
311D to 390D Excavator Front Linkage Bushing Diameter {6001, 6501, 6502, 6513, 6700}
2013/03/04
A New Boom Assembly is Now Available for Certain Excavators with Mass Boom {6501}
A New Boom Assembly is Now Available for Certain Excavators with Mass Boom {6501}

Caterpillar Parts SIS Catalog 336D L :

388-3114 BOOM AR-MASS
299-9539 BOOM AR-MASS
388-3113 BOOM AR-1 PIECE LONG
314-3615 BOOM AR-1 PIECE LONG
302-7339 BOOM AR-1 PIECE LONG
VALVE GP-TRAVEL COUNTERBALANCE
322-8714 VALVE GP-TRAVEL COUNTERBALANCE
VALVE GP-TRAVEL COUNTERBALANCE
204-2819 VALVE GP-TRAVEL COUNTERBALANCE
379-8926 VALVE GP-SWING CUSHION
BOOM GP
290-9248 BOOM GP
BOOM GP
290-9248 BOOM GP
BOOM GP
290-9248 BOOM GP
BOOM GP
324-1093 BOOM GP
LINES GP-GREASE
192-8320 LINES GP-GREASE
LINES GP-GREASE
201-2816 LINES GP-GREASE
388-1430 LINKAGE AR
290-1825 LINKAGE AR-BUCKET

Truck sale:

Caterpillar 336D L
 
Caterpillar 336D L
- Crawler Excavators
GREGORY POOLE EQUIPMENT CO.
Caterpillar 336DL, Crawler Excavators, Construction
74,767 
Caterpillar 336DL, Crawler Excavators, Construction
- Crawler Excavators
WILLIAM ADAMS PTY. LTD.
 
31,260 
Caterpillar 336DL, Crawler Excavators, Construction
- Crawler Excavators
SIME DARBY INDUSTRIAL SDN BHD
Caterpillar 336DL, Crawler Excavators, Construction
119,059 
Caterpillar 336DL, Crawler Excavators, Construction
- Crawler Excavators
EMPIRE MACHINERY
Caterpillar 336DL, Crawler Excavators, Construction
57,256 
Caterpillar 336DL, Crawler Excavators, Construction
- Crawler Excavators
WESTRAC PTY. LTD. (NSW)
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.