AVSPARE.COM
parts catalog

259-4965 WIRING GP-FINE SWING S/N BFC1-UP; SCY1-UP PART OF 314-3655, 314-3656 CHASSIS AR 329D L EXCAVATOR




ELECTRICAL AND STARTING SYSTEM

WIRING GP
 

#SEBP53790270
 

259-4965: WIRING GP-FINE SWING

259-4965 WIRING GP-FINE SWING
S/N BFC1-UP; SCY1-UP
PART OF 314-3655, 314-3656 CHASSIS AR
i02296363 SEBP5379
  For full view, you need register

Parts for your 329D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-8109 [1] BRACKET AS  
2. 111-4836 [6] CLIP  
3. 111-4837 [2] CLIP  
4. 291-7551 [1] HARNESS AS-MOTOR (SWING MOTOR CONTROL)  
  103-2529 E HOSE (72-CM)  
  9W-0844 [4] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
5. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
6. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
7. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP53790271
 

259-5053: WIRING GP-FUEL SYSTEM

259-5053 WIRING GP-FUEL SYSTEM -PRIMING PUMP
S/N BFC1-UP; SCY1-UP
PART OF 247-7458 PUMP GP-FUEL PRIMING
AN ATTACHMENT
i02301743 SEBP5379
  For full view, you need register

Parts for your 329D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [10] STRAP-CABLE  
2. 7K-1181 [7] STRAP-CABLE  
3. 137-6606 [1] FILM-IDENTIFICATION (FUEL)  
4. 165-5970 Y [1] SWITCH GP-TOGGLE (FUEL PRIMING PUMP)  
5. 267-7967 [1] HARNESS AS-PUMP (FUEL)  
  8T-8729 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  9W-0852 [3] PIN-CONNECTOR (14-GA TO 16-GA)  
  9W-0844 [4] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP53790272
 

259-4949: WIRING GP-MEDIUM PRESSURE

259-4949 WIRING GP-MEDIUM PRESSURE
S/N BFC1-UP; SCY1-UP
PART OF 255-5811 CONTROL AR-AUXILIARY
AN ATTACHMENT
i02303619 SEBP5379
  For full view, you need register

Parts for your 329D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [5] STRAP-CABLE  
2. 7K-1181 [5] STRAP-CABLE  
3. 102-7886 [1] SPACER (11X20X80-MM THK)  
4. 267-8019 [1] HARNESS AS-VALVE  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [1] STRAP-CABLE  
  8T-8737 [3] PLUG-SEAL  
  125-7874 BE TUBE-HEAT SHRINK (5.72-MM DIA)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  243-4508 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
5. 132-5789 [1] CLIP (LADDER)  
6. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4198 M [1] BOLT (M10X1.5X100-MM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP53790273
 

251-0430: WIRING GP-PLATFORM

251-0430 WIRING GP-PLATFORM
S/N BFC1-UP; SCY1-UP
PART OF 229-9072 OPERATOR AR
i02296219 SEBP5379
  For full view, you need register

Parts for your 329D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [6] STRAP-CABLE  
2. 7G-1060 [1] STRAP AS-GROUND  
3. 7K-1181 [16] STRAP-CABLE  
4. 111-4836 [4] CLIP  
5. 111-4838 [2] CLIP  
6. 111-4839 [2] STRAP  
7. 116-0118 [14] CLIP  
8. 234-1122 [1] COVER  
9. 251-0299 [1] HARNESS AS-SWITCH (SECONDARY SHUTDOWN)  
  2L-8074 [2] TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
10. 264-7095 [1] HARNESS AS-PLATFORM  
  102-8802 [5] KIT-RECEPTACLE (2-PIN)  
  8T-8729 [13] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [25] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [23] STRAP-CABLE  
  8T-8737 [39] PLUG-SEAL  
  102-7964 [1] PLUG-CONNECTOR (16-PIN)  
  102-7965 [14] TERMINAL (FEMALE)  
  9W-0852 [7] PIN-CONNECTOR (14-GA TO 16-GA)  
  9W-0844 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  116-0255 [1] TERMINAL-BLADE (10-GA TO 20-GA)  
  119-3662 BE TUBE-HEAT SHRINK (10.85-MM DIA)  
  121-1039 [1] TERMINAL (MALE)  
  121-1168 [2] CONNECTOR-RECEPTACLE  
  121-1173 [32] TERMINAL (MALE)  
  125-4766 [1] PLUG-CONNECTOR (17-PIN)  
  125-4841 [1] WEDGE-PLUG LOCK (21-PIN)  
  125-7874 BE TUBE-HEAT SHRINK (5.72-MM DIA)  
  125-7875 BE TUBE-HEAT SHRINK (7.44-MM DIA)  
  9X-3402 [97] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [97] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  126-1768 [10] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  2L-8050 [2] TERMINAL-RING (6-GA, 1/4-IN SCREW)  
    -OR-
  2L-8058 [2] TERMINAL-RING (8-GA, 1/4-IN SCREW)  
  2L-8052 [1] TERMINAL-RING (6-GA, 3/8-IN SCREW)  
    -OR-
  2L-8060 [1] TERMINAL-RING (8-GA, 3/8-IN SCREW)  
  2L-8069 [4] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  134-3296 [1] HOUSING-PLUG  
  134-3297 [2] SEAL  
  9X-3401 [25] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [25] PIN-CONNECTOR (14-GA TO 16-GA)  
  153-2620 [1] PLUG AS-CONNECTOR (54-PIN, BLACK)  
  155-2270 [12] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  197-4385 [3] DIODE  
  230-4009 [3] PLUG AS-CONNECTOR (12-PIN)  
  230-4011 [4] PLUG AS-CONNECTOR (2-PIN)  
  230-5010 [3] PLUG AS-CONNECTOR (6-PIN)  
  238-2363 [10] TERMINAL (FEMALE)  
  238-2366 [7] TERMINAL (MALE)  
  243-4505 [2] RECEPTACLE AS-CONNECTOR (2-PIN)  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
  243-4508 [4] RECEPTACLE AS-CONNECTOR (6-PIN)  
  243-4509 [1] RECEPTACLE AS-CONNECTOR (8-PIN)  
  243-4510 [2] RECEPTACLE AS-CONNECTOR (12-PIN)  
11. 095-0728 M [2] SCREW-MACHINE (M4X0.7X12-MM)  
12. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
13. 3E-5169 [1] GUARD-SWITCH  
14. 4D-1836 [1] SWITCH-TOGGLE (SECONDARY SHUTDOWN)  
15. 7X-2621 M [7] BOLT (M10X1.5X12-MM)  
16. 8T-4121 [14] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4137 M [7] BOLT (M10X1.5X20-MM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP53790274
 

267-7643: WIRING GP-QUICK COUPLER

267-7643 WIRING GP-QUICK COUPLER
S/N BFC1-UP; SCY1-UP
PART OF 262-3580 CONTROL AR-COUPLER
AN ATTACHMENT
i02419838 SEBP5379
  For full view, you need register

Parts for your 329D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [14] STRAP-CABLE  
2. 7K-1181 [9] STRAP-CABLE  
3. 116-0118 [1] CLIP  
4. 267-7645 [1] HARNESS AS-SOLENOID (QUICK COUPLER)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [3] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
5. 4P-7581 [1] CLIP (LADDER)  
6. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP53790275
 

238-1570: WIRING GP-REFUELING PUMP

238-1570 WIRING GP-REFUELING PUMP
S/N BFC1-UP; SCY1-UP
PART OF 229-1784 PUMP AR-FUEL TRANSFER
AN ATTACHMENT
i03161300 SEBP5379
  For full view, you need register

Parts for your 329D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [16] STRAP-CABLE  
2. 9X-3495 [1] CLIP AS  
3. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, STOP)  
3A. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, START)  
4. 213-0772 [1] SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)  
5. 238-1579 [1] HARNESS AS-PUMP (REFUELING)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [3] STRAP-CABLE  
  8T-8737 [1] PLUG-SEAL  
  116-0126 [1] HOUSING-PLUG  
  116-0128 [2] SEAL  
  116-0255 [2] TERMINAL-BLADE (10-GA TO 20-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  121-1038 [1] HOUSING-RECEPTACLE  
  121-1039 [2] TERMINAL (MALE)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
  2L-8065 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)  
  2L-8067 [2] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  2L-8075 [1] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  2L-8077 [1] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
  149-5051 [2] CONNECTOR-RECEPTACLE  
  149-5069 [4] TERMINAL-BLADE (14-GA TO 20-GA)  
  149-5070 [4] TERMINAL-BLADE (16-GA TO 20-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  197-4385 [1] DIODE  
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
6. 319-1335 C [1] HARNESS AS-WIRING  
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
7. 238-1594 Y [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)  
8. 238-1596 Y [1] SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)  
9. 096-2591 M [2] SCREW-MACHINE (M5X0.8X35-MM)  
10. 7X-2619 M [2] BOLT (M6X1X10-MM)  
11. 8T-0328 C [2] WASHER-HARD (5.5X10X1-MM THK)  
12. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
13. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
14. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
15. 275-6993 [1] COVER  
16. 7K-1181 C [11] STRAP-CABLE  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP53790276
 

267-6796: DRIVE GP-FINAL

267-6796 DRIVE GP-FINAL -WITHOUT MOTOR
S/N BFC1-UP; SCY1-UP
PART OF 267-6877, 333-2982 DRIVE GP-FINAL
FIELD REPLACEMENT ORDER @@@@@333-2909@@@@@
ALSO AN ATTACHMENT
i03077037 SEBP5379
  For full view, you need register

Parts for your 329D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-2338 [2] PLUG-PIPE  
2. 267-6863 BJ [1] SHIM (0.75-MM THK)  
  7Y-0752 BJ [1] SHIM (0.8-MM THK)  
  267-6864 BJ [1] SHIM (0.85-MM THK)  
  267-6865 BJ [1] SHIM (0.9-MM THK)  
  267-6866 BJ [1] SHIM (0.95-MM THK)  
  7Y-0753 BJ [1] SHIM (1-MM THK)  
  267-6867 BJ [1] SHIM (1.2-MM THK)  
  267-6868 BJ [1] SHIM (1.4-MM THK)  
  7Y-0754 BJ [1] SHIM (1.6-MM THK)  
  267-6869 BJ [1] SHIM (1.8-MM THK)  
  267-6870 BJ [1] SHIM (2-MM THK)  
  267-6871 BJ [1] SHIM (2.3-MM THK)  
5. 094-0578 B [1] PLATE (8-MM THK)  
  094-0579 B [1] PLATE (9-MM THK)  
  094-0580 B [1] PLATE (10-MM THK)  
8. 094-1528 [12] WASHER (53X84X1-MM THK)  
9. 114-1540 J [4] PIN-DOWEL  
10. 168-8452 J [2] BALL BEARING  
11. 169-5589 [1] GEAR-SUN (24-TEETH)  
12. 169-5590 [1] GEAR-SUN (24-TEETH)  
13. 169-5592 [3] GEAR-PLANETARY (23-TEETH)  
14. 169-5593 [3] GEAR-PLANETARY (23-TEETH)  
15. 169-5601 [3] SHAFT-PLANETARY  
16. 169-5602 [3] SHAFT-PLANETARY  
17. 171-9387 [1] GEAR-RING (64-TEETH)  
18. 191-2569 [3] BEARING AS (CAGED ROLLER)  
19. 191-2570 [6] BEARING AS (CAGED ROLLER)  
20. 191-2571 [1] CARRIER-PLANETARY  
21. 191-2676 [1] GEAR-RING (72-TEETH)  
22. 191-2683 [1] GEAR-SUN (20-TEETH)  
23. 191-2684 [3] GEAR-PLANETARY (21-TEETH)  
24. 191-2685 [3] BEARING AS  
25. 191-2686 [1] CARRIER AS  
  191-2687 [3] RACE-BEARING  
26. 191-2689 [3] WASHER (34X70X1-MM THK)  
27. 191-2690 [3] WASHER (42.3X70X1-MM THK)  
28. 199-4503 [1] COVER  
29. 207-1571 J [1] SEAL GP-DUO-CONE  
  214-3570 [2] RING-TORIC  
30. 267-6797 J [1] HOUSING-MOTOR  
31. 267-6798 J [1] HOUSING  
32. 267-6799 [1] CARRIER-PLANETARY  
33. 267-6800 J [1] GEAR-COUPLING  
43. 093-1731 [2] RING-RETAINING  
44. 095-0891 [6] PIN-SPRING  
45. 096-0433 [3] RING-RETAINING  
46. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
47. 171-9298 [1] SEAL-O-RING  
48. 179-8733 M [16] BOLT (M20X2.5X170-MM)  
49. 7M-8485 [2] SEAL-O-RING  
50. 7Y-0595 [3] SPACER (58X79.6X6-MM THK)  
51. 7Y-5217 JM [16] BOLT-SOCKET HEAD (M20X2.5X70-MM)  
52. 8T-3282 J [16] WASHER-HARD (22X35X3.5-MM THK)  
53. 8T-4123 [16] WASHER (3.62X5.75X0.375-MM THK)  
54. 9X-6032 M [12] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
55. 1U-8846 B SEALANT-GASKET  
   
    AVAILABLE REPAIR KIT(S):
  267-6818 J [1] KIT-FINAL DRIVE BEARING  
  B   USE AS REQUIRED
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP53790277
 

267-6877: DRIVE GP-FINAL

267-6877 DRIVE GP-FINAL -WITH MOTOR
S/N BFC1-UP; SCY1-UP
PART OF 171-9410 POWER TRAIN AR
i03077012 SEBP5379
  For full view, you need register

Parts for your 329D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 204-2674 Y [1] MOTOR & MTG GP-TRAVEL  
2. 267-6796 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP53790278
 

333-2909: DRIVE GP-FINAL

333-2909 DRIVE GP-FINAL -WITHOUT MOTOR
S/N BFC1-UP; SCY1-UP
FIELD REPLACEMENT FOR @@@@@267-6796@@@@@
i04308621 SEBP5379
  For full view, you need register

Parts for your 329D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-2338 [2] PLUG-PIPE (FINAL DRIVE, OIL DRAIN, FILL)  
2. 267-6863 B [1] SHIM (0.75-MM THK)  
  7Y-0752 B [1] SHIM (0.8-MM THK)  
  267-6864 B [1] SHIM (0.85-MM THK)  
  267-6865 B [1] SHIM (0.9-MM THK)  
  267-6866 B [1] SHIM (0.95-MM THK)  
  7Y-0753 B [1] SHIM (1-MM THK)  
  267-6867 B [1] SHIM (1.2-MM THK)  
  267-6868 B [1] SHIM (1.4-MM THK)  
  7Y-0754 B [1] SHIM (1.6-MM THK)  
  267-6869 B [1] SHIM (1.8-MM THK)  
  267-6870 B [1] SHIM (2-MM THK)  
  267-6871 B [1] SHIM (2.3-MM THK)  
3. 191-2690 [3] WASHER (42.3X70X1-MM THK)  
5. 094-0578 B [1] PLATE (8-MM THK)  
6. 094-0579 B [1] PLATE (9-MM THK)  
7. 094-0580 B [1] PLATE (10-MM THK)  
8. 094-1528 [12] WASHER (53X84X1-MM THK)  
9. 114-1540 [4] PIN-DOWEL  
10. 333-2914 [2] BALL BEARING  
11. 169-5589 [1] GEAR-SUN (24-TEETH)  
12. 169-5590 [1] GEAR-SUN (24-TEETH)  
13. 169-5592 [3] GEAR-PLANETARY (23-TEETH)  
14. 169-5593 [3] GEAR-PLANETARY (23-TEETH)  
15. 171-9387 [1] GEAR-RING (64-TEETH)  
16. 169-5601 [3] SHAFT-PLANETARY  
17. 169-5602 [3] SHAFT-PLANETARY  
18. 191-2689 [3] WASHER (34X70X1-MM THK)  
19. 333-2916 [3] BEARING AS  
20. 333-2917 [6] BEARING AS  
21. 191-2571 [1] CARRIER-PLANETARY  
22. 191-2683 [1] GEAR-SUN (20-TEETH)  
23. 191-2684 [3] GEAR-PLANETARY (21-TEETH)  
24. 191-2676 [1] GEAR-RING (72-TEETH)  
25. 296-6248 [3] BEARING AS-ROLLER  
26. 191-2686 [1] CARRIER AS  
27. 199-4503 [1] COVER  
28. 207-1571 [1] SEAL GP-DUO-CONE  
  214-3570 [2] RING-TORIC  
29. 267-6797 [1] HOUSING-MOTOR  
30. 267-6799 [1] CARRIER-PLANETARY  
31. 267-6800 [1] GEAR-COUPLING  
41. 267-6798 [1] HOUSING  
42. 093-1731 [2] RING-RETAINING  
43. 095-0891 [6] PIN-SPRING  
44. 096-0433 [3] RING-RETAINING  
45. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
46. 171-9298 [1] SEAL-O-RING  
47. 179-8733 M [16] BOLT (M20X2.5X170-MM)  
48. 7M-8485 [2] SEAL-O-RING  
49. 7Y-0595 [3] SPACER (58X79.6X6-MM THK)  
50. 7Y-5217 M [16] BOLT-SOCKET HEAD (M20X2.5X70-MM)  
51. 8T-3282 [16] WASHER-HARD (22X35X3.5-MM THK)  
52. 8T-4123 [16] WASHER (3.62X5.75X0.375-MM THK)  
53. 9X-6032 M [12] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
54. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP53790279
 

333-2982: DRIVE GP-FINAL

333-2982 DRIVE GP-FINAL -WITH MOTOR, BIODEGRADABLE OIL
S/N BFC1-UP; SCY1-UP
PART OF 353-0672 DRIVE GP-FINAL, 229-1791 HYDRAULIC AR-BIODEGRADABLE OIL
AN ATTACHMENT
i03669660 SEBP5379
  For full view, you need register

Parts for your 329D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 215-9956 Y [1] MOTOR & MTG GP-TRAVEL  
2. 267-6796 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Operation and Maintenance Manual
Battery Disconnect Switch
325D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit
Battery or Battery Cable - Inspect/Replace
325D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit
Battery - Recycle
325D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit
SmartBoom Operation - If Equipped
325D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit
SmartBoom Control - If Equipped
325D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit
Fuses - Replace
325D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit
Power Receptacle - If Equipped
325D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}
Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}
Installation of the 270-6106 Auxiliary Control Ar {1408, 1435, 7405, 7553, 7557}
Installation of the 270-6106 Auxiliary Control Ar {1408, 1435, 7405, 7553, 7557}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Installation Procedure of 328-0393 Auxiliary Control Wiring Gp on Certain Excavators{1408}
Installation Procedure of 328-0393 Auxiliary Control Wiring Gp on Certain Excavators{1408}
Installation of the 251-0437 Auxiliary Control Wiring Gp {1408}
Installation of the 251-0437 Auxiliary Control Wiring Gp {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Procedure to Properly Check Window Limiter Switch on Certain Large and Medium Hydraulic Excavators{1408, 7301}
Procedure to Properly Check Window Limiter Switch on Certain Large and Medium Hydraulic Excavators{1408, 7301}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Wrong Resistor May be Installed into <NOBR>176-9668</NOBR> Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
Service Letter-Asia
Systems Operation
Relays
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System
Senders
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System
Sensors
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System
Switches
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System
Switches
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Sensors
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RADIO CONVERTER ON VARIOUS EXCAVATORS
Testing and Adjusting
Electric Starting System - Test
C7 Engines for Caterpillar Built Machines
Electrical Connector - Inspect
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Wiring Harness (Open Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Wiring Harness (Short Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
System Schematic
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Overload Warning - Set - If Equipped
325D and 329D Excavators Hydraulic System
Electrical Connector - Inspect
Product Link - PL522/523
Electrical Connector - Inspect
Product Link 121S/300
System Schematic
Machine Security System (MSS3i) Integrated
Troubleshooting
Electrical Connectors - Inspect
C7 and C9 Engines for Caterpillar Built Machines
CID 0100 FMI 04 Engine Oil Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines
CID 0174 FMI 04 Fuel Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C7 and C9 Engines for Caterpillar Built Machines
CID 0274 FMI 04 Atmospheric Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines
CID 0110 FMI 04 Engine Coolant Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines
CID 0164 FMI 03 Injector Actuation Pressure voltage high
C7 and C9 Engines for Caterpillar Built Machines
CID 0091 FMI 08 Throttle Position signal abnormal
C7 and C9 Engines for Caterpillar Built Machines
CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C7 and C9 Engines for Caterpillar Built Machines
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines
CID 0164 FMI 04 Injector Actuation Pressure voltage low
C7 and C9 Engines for Caterpillar Built Machines
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines
Fuel Filter Differential Pressure Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines
Engine Wiring Information
C7 and C9 Engines for Caterpillar Built Machines
CID 2417 FMI 05 Ether Injection Control Solenoid current low
C7 and C9 Engines for Caterpillar Built Machines
CID 2417 FMI 06 Ether Injection Control Solenoid current high
C7 and C9 Engines for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C7 and C9 Engines for Caterpillar Built Machines
CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C7 and C9 Engines for Caterpillar Built Machines
CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C7 and C9 Engines for Caterpillar Built Machines
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C7 and C9 Engines for Caterpillar Built Machines
CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines
CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C7 and C9 Engines for Caterpillar Built Machines
Air Inlet Heater Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines
MID 039 - CID 0096 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0096 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0586 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0586 - FMI 12
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0588 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1178 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1178 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1178 - FMI 08
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 2280 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
CID 0174 FMI 03 Fuel Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines
Sensors and Electrical Connectors
C7 and C9 Engines for Caterpillar Built Machines
Throttle Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines
Low Engine Oil Pressure Lamp Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines
Electrical Component and Connector Locations
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0110 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0110 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 2300 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0600 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
CID 0190 FMI 08 Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines
CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C7 and C9 Engines for Caterpillar Built Machines
MID 122 - CID 0269 - FMI 03
Product Link 121S/300
MID 122 - CID 0269 - FMI 04
Product Link 121S/300
Service Magazine
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog 329D L :

Truck sale:

89,812 USD 
Caterpillar 329DL, Construction
- Crawler Excavators
HASTINGS DEERING (AUSTRALIA)
Australia
 
 
Caterpillar 329DL, Construction
- Crawler Excavators
CATERPILLAR LEASING CHILE S.A.
Chile
85,614 
Caterpillar 329DL, Construction
- Crawler Excavators
WESTRAC PTY. LTD. (NSW)
Australia
250,000 
Caterpillar 329DL, Construction
- Crawler Excavators
GENTRAC
Guatemala
 
On Request 
Caterpillar 329DL, Construction
- Crawler Excavators
MOHAMED ABDULRAHMAN AL-BAHAR
Kuwait
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.