AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

487-2807 CYLINDER HEAD GP S/N TX71-UP; KHX4087-UP PART OF 219-5847 CYLINDER HEAD GP 329D EXCAVATOR


BASIC ENGINE
CYLINDER HEAD GP
DAMPER GP
DRIVE GP-FAN
CYLINDER HEAD GP
FASTENER GP-ENGINE
HOUSING GP-FRONT
LIFTER GP
FLYWHEEL GP
GEAR GP
HOUSING GP-FLYWHEEL

EXCAVATOR 329D EXCAVATOR BYS
 329D & 329D L Excavators BYS00001-UP (MACHINE) POWERED BY C7 Engine SEBP5383 329D BYS   (2008)

BASIC ENGINE

CYLINDER HEAD GP
CYLINDER HEAD AS
314-4184 CYLINDER HEAD AS
CYLINDER HEAD AS
487-2810 CYLINDER HEAD AS
CYLINDER HEAD GP
219-5847 CYLINDER HEAD GP
CYLINDER HEAD GP
219-5847 CYLINDER HEAD GP
CYLINDER HEAD GP
219-5849 CYLINDER HEAD GP
CYLINDER HEAD GP
300-9550 CYLINDER HEAD GP
CYLINDER HEAD GP
487-2807 CYLINDER HEAD GP
FASTENER GP-CYLINDER HEAD
258-8723 FASTENER GP-CYLINDER HEAD
453-2213 KIT-CYLINDER HEAD GASKET
PLUG GP-ENGINE
162-8068 PLUG GP-ENGINE
 

#SEBP53830080
 

487-2807: CYLINDER HEAD GP

487-2807 CYLINDER HEAD GP
S/N TX71-UP; KHX4087-UP
PART OF 219-5847 CYLINDER HEAD GP
i06510491 SEBP5383
4872807 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 329D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-2715 [24] LOCK-RETAINER  
2. 2A-4429 [12] LOCK-RETAINER  
3. 7E-7779 [12] RETAINER-SPRING  
4. 134-4483 [6] RETAINER-SPRING  
5. 137-6715 [6] SEAT-VALVE SPRING  
6. 137-6718 [6] SPRING-VALVE  
7. 140-6188 [12] SPRING-VALVE  
8. 147-8214 [12] SEAL-VALVE STEM  
9. 147-8220 [6] GUIDE-VALVE  
10. 157-7130 [6] VALVE-EXHAUST  
11. 163-2478 [6] SEAL-VALVE STEM  
12. 252-7801 [12] VALVE-INLET  
13. 487-2810 Y [1] CYLINDER HEAD AS  
14. 140-9670 [12] GUIDE-VALVE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP53830081
 

263-1850: DAMPER & PULLEY GP

263-1850 DAMPER & PULLEY GP
S/N TX71-UP; KHX4087-UP
PART OF 290-0756, 387-8487 ENGINE AR, 290-0754, 423-3918, 435-1295 ENGINE AR-COMPLETE
i02585781 SEBP5383
2631850 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 329D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-7381 [1] PLATE-CLAMP  
2. 116-6332 [1] SPACER-SPECIAL  
3. 167-8121 [1] DAMPER AS  
4. 228-3621 [1] SPACER (101.5X167X8-MM THK)  
5. 153-1036 C [1] PULLEY-CRANKSHAFT  
6. 8T-3666 M [4] BOLT (M14X2X60-MM)  
7. 8T-5035 M [8] BOLT (M10X1.5X65-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP53830082
 

177-6973: DRIVE GP-FAN

177-6973 DRIVE GP-FAN
S/N TX71-UP; KHX4087-UP
PART OF 253-0437 BRACKET GP-ENGINE
i01674047 SEBP5383
1776973 DRIVE GP-FAN Parts scheme
  For full view, you need register

Parts for your 329D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-1203 [2] CUP-BEARING  
2. 4W-1204 [2] CONE-BEARING  
3. 4W-2042 [1] SPACER (35.3X45.5X38.331-MM THK)  
4. 6V-9748 [1] SEAL-LIP TYPE  
5. 7C-8369 [1] HUB  
6. 7C-8370 [1] CAP-DUST  
7. 7C-8634 [1] PLATE  
8. 183-2854 [1] BRACKET AS  
9. 5S-9062 [1] SPACER (35.032X50.8X15.88-MM THK)  
10. 6V-8004 M [1] BOLT (M12X1.75X120-MM)  
  M   METRIC PART
 

#SEBP53830083
 

258-8723: FASTENER GP-CYLINDER HEAD

258-8723 FASTENER GP-CYLINDER HEAD
S/N TX71-UP; KHX4087-UP
PART OF 290-0756, 387-8487 ENGINE AR, 290-0754, 423-3918, 435-1295 ENGINE AR-COMPLETE
i02550737 SEBP5383
2588723 FASTENER GP-CYLINDER HEAD Parts scheme
  For full view, you need register

Parts for your 329D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 229-8844 [3] CLIP  
2. 244-4500 [11] SPRING  
3. 8T-0100 M [11] BOLT (M8X1.25X60-MM)  
4. 9N-0869 [11] WASHER-HARD (8.8X25.5X2-MM THK)  
  M   METRIC PART
 

#SEBP53830084
 

252-9551: FASTENER GP-FRONT COVER

252-9551 FASTENER GP-FRONT COVER
S/N TX71-UP; KHX4087-UP
PART OF 290-0756, 387-8487 ENGINE AR, 290-0754, 423-3918, 435-1295 ENGINE AR-COMPLETE
i02550388 SEBP5383
2529551 FASTENER GP-FRONT COVER Parts scheme
  For full view, you need register

Parts for your 329D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-2098 M [1] STUD-TAPERLOCK (M8X1.25X45-MM)  
2. 6V-2317 M [12] BOLT (M8X1.25X30-MM)  
3. 8T-0100 M [2] BOLT (M8X1.25X60-MM)  
4. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
 

#SEBP53830085
 

116-4556: FASTENER GP-FRONT HOUSING

116-4556 FASTENER GP-FRONT HOUSING
S/N TX71-UP; KHX4087-UP
PART OF 290-0756, 387-8487 ENGINE AR, 290-0754, 423-3918, 435-1295 ENGINE AR-COMPLETE
i01673515 SEBP5383
1164556 FASTENER GP-FRONT HOUSING Parts scheme
  For full view, you need register

Parts for your 329D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8336 M [6] BOLT (M12X1.75X70-MM)  
  5P-8245 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
 

#SEBP53830086
 

113-6170: FASTENER GP-LIFTING

113-6170 FASTENER GP-LIFTING
S/N TX71-UP; KHX4087-UP
PART OF 290-0756, 387-8487 ENGINE AR, 290-0754, 423-3918, 435-1295 ENGINE AR-COMPLETE
i01673518 SEBP5383
1136170 FASTENER GP-LIFTING Parts scheme
  For full view, you need register

Parts for your 329D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
2. 6V-4248 M [3] BOLT (M10X1.5X25-MM)  
  M   METRIC PART
 

#SEBP53830087
 

186-5892: FLYWHEEL GP

186-5892 FLYWHEEL GP
S/N TX71-UP; KHX4087-UP
PART OF 290-0756, 387-8487 ENGINE AR, 290-0754, 423-3918, 435-1295 ENGINE AR-COMPLETE
i02393309 SEBP5383
1865892 FLYWHEEL GP Parts scheme
  For full view, you need register

Parts for your 329D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 202-2382 [1] FLYWHEEL AS  
1A. 1W-1064 [1] GEAR-FLYWHEEL RING (126-TEETH)  
2. 6V-8197 M [8] BOLT (M12X1.75X40-MM)  
3. 5P-8245 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 3E-3213 [1] PIN-SPRING  
  M   METRIC PART
 

#SEBP53830088
 

205-1321: GEAR GP-FRONT

205-1321 GEAR GP-FRONT
S/N TX71-UP; KHX4087-UP
PART OF 270-4212, 270-4213, 387-8535 ENGINE AR-CORE
i01851726 SEBP5383
2051321 GEAR GP-FRONT Parts scheme
  For full view, you need register

Parts for your 329D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-6069 [1] PLATE-THRUST  
2. 115-4219 [1] PLATE-RETAINING  
3. 200-4495 [1] SHAFT-IDLER  
4. 205-1320 [1] GEAR AS-IDLER (50-TEETH)  
4A. 115-4072 [1] BEARING  
5. 136-4183 M [1] BOLT-12 POINT HEAD (M10X1.5X30-MM)  
6. 6V-5843 M [2] BOLT (M10X1.5X45-MM)  
  M   METRIC PART
 

#SEBP53830089
 

7W-8813: HOUSING GP-FLYWHEEL

7W-8813 HOUSING GP-FLYWHEEL
S/N TX71-UP; KHX4087-UP
PART OF 290-0756, 387-8487 ENGINE AR, 290-0754, 423-3918, 435-1295 ENGINE AR-COMPLETE
i01674231 SEBP5383
7W8813 HOUSING GP-FLYWHEEL Parts scheme
  For full view, you need register

Parts for your 329D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-5233 [1] HOUSING-FLYWHEEL  
2. 2P-1294 [1] PLUG-SEAL  
3. 6V-5842 M [2] BOLT (M10X1.5X40-MM)  
4. 8T-0226 M [10] BOLT (M14X2X45-MM)  
5. 9S-4182 [1] PLUG (7/16-20-THD)  
6. 9S-4183 B [1] PLUG (1-1/16-12-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Engine Valve Lash - Check
325D and 329D Excavators
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290}
Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290}
Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}
Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}
Specifications
Cylinder Head
C7 Engines for Caterpillar Built Machines
Cylinder Head Valves
C7 Engines for Caterpillar Built Machines
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
CAT REMAN ADDING CYLINDER HEAD KITS FOR 3126B, C7, C10/C12 APPLICATIONS
CAT REMAN ADDING CYLINDER HEAD KITS FOR 3126B, C7, C10/C12 APPLICATIONS
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
C7 Engines for Caterpillar Built Machines
Disassembly and Assembly
Inlet and Exhaust Valves - Remove and Install
C7
Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install
C7
Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
C7
Engines for Caterpillar Built Machines
Unit Injector Sleeve - Remove
C7
Engines for Caterpillar Built Machines
Unit Injector Sleeve - Install
C7
Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
C7
Engines for Caterpillar Built Machines
Cylinder Head - Remove
C7
Engines for Caterpillar Built Machines
Cylinder Head - Install
C7
Engines for Caterpillar Built Machines
Cylinder Head - Remove
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit C7 Engine Supplement
Cylinder Head - Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit C7 Engine Supplement
Service Magazine
Diagnostic Publications for the Systems of the Hydraulic Electronic Unit Injector (HEUI) have been Updated {1100, 1126, 1250, 1251, 1261, 1290}
2009/08/10
A New Exhaust Valve Is Used for CertainC7 Machine Engines {1100}
A New Exhaust Valve Is Used for CertainC7 Machine Engines {1100}

Caterpillar Parts SIS Catalog 329D :

CYLINDER HEAD GP
300-9550 CYLINDER HEAD GP
CYLINDER HEAD GP
219-5849 CYLINDER HEAD GP
CYLINDER HEAD GP
219-5847 CYLINDER HEAD GP
CYLINDER HEAD GP
219-5847 CYLINDER HEAD GP
CYLINDER HEAD AS
487-2810 CYLINDER HEAD AS
CYLINDER HEAD AS
314-4184 CYLINDER HEAD AS
CYLINDER BLOCK GP
305-8141 CYLINDER BLOCK GP
CYLINDER BLOCK GP
263-3774 CYLINDER BLOCK GP
DAMPER & PULLEY GP
263-1850 DAMPER & PULLEY GP
DRIVE GP-FAN
177-6973 DRIVE GP-FAN
FASTENER GP-CYLINDER HEAD
258-8723 FASTENER GP-CYLINDER HEAD
FASTENER GP-FRONT COVER
252-9551 FASTENER GP-FRONT COVER
FASTENER GP-FRONT HOUSING
116-4556 FASTENER GP-FRONT HOUSING
FASTENER GP-LIFTING
113-6170 FASTENER GP-LIFTING
FLYWHEEL GP
186-5892 FLYWHEEL GP
GEAR GP-FRONT
205-1321 GEAR GP-FRONT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.