AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

210-5592 PISTON & ROD GP S/N KHX4087-UP 16.5:1 COMPRESSION RATIO PART OF 270-4212 ENGINE AR-CORE 329D


BASIC ENGINE
PISTON & ROD GP
CYLINDER BLOCK GP
PULLEY GP
VALVE MECHANISM GP
CRANKSHAFT GP
VALVE MECHANISM GP

EXCAVATOR 329D EXCAVATOR BYS
 329D & 329D L Excavators BYS00001-UP (MACHINE) POWERED BY C7 Engine SEBP5383 329D BYS   (2008)

BASIC ENGINE

PISTON & ROD GP
PISTON & ROD GP
210-5592 PISTON & ROD GP
PISTON & ROD GP
212-3652 PISTON & ROD GP
 

#SEBP53830100
 

210-5592: PISTON & ROD GP

210-5592 PISTON & ROD GP
S/N KHX4087-UP
16.5:1 COMPRESSION RATIO
PART OF 270-4212 ENGINE AR-CORE
i02550959 SEBP5383
2105592 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 329D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 213-3193 [1] ROD AS-CONNECTING (NON-DRILLED)  
1A. 2W-0027 [1] BEARING (EYE END)  
1B. 195-0321 [2] BOLT  
2. 224-6638 [1] BEARING-CONNECTING ROD (STANDARD)  
  7C-6976 AB BEARING-CONNECTING ROD (0.25-MM US)  
  7C-6977 AB BEARING-CONNECTING ROD (0.5-MM US)  
3. 197-9354 [1] RING-PISTON (OIL CONTROL)  
4. 197-9353 [1] RING-PISTON (INTERMEDIATE)  
5. 197-9386 [1] RING-PISTON (TOP)  
6. 524-7848 [1] PIN-PISTON  
7. 173-0143 [1] JET AS-PISTON COOLING  
8. 238-2698 [1] BODY AS  
9. 6V-3940 M [1] BOLT (M8X1.25X25-MM)  
10. 7C-0111 [2] RETAINER-PIN  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP53830101
 

212-3652: PISTON & ROD GP

212-3652 PISTON & ROD GP
S/N TX71-UP; KHX1-UP
16.5:1 COMPRESSION RATIO
PART OF 270-4213, 387-8535 ENGINE AR-CORE
i02550964 SEBP5383
2123652 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 329D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 197-9353 [1] RING-PISTON (INTERMEDIATE)  
2. 524-6492 [1] PIN-PISTON  
3. 197-9372 [2] RETAINER-PIN  
4. 197-9386 [1] RING-PISTON (TOP)  
5. 213-3193 [1] ROD AS-CONNECTING (NON-DRILLED)  
5A. 2W-0027 [1] BEARING (EYE END)  
5B. 229-6266 M [2] BOLT (M11X1.25X65-MM)  
6. 224-6638 [1] BEARING-CONNECTING ROD (STANDARD)  
7. 238-2706 [1] RING-PISTON (OIL)  
8. 238-2720 [1] BODY AS-PISTON  
9. 280-2748 [1] TUBE AS-OIL JET  
10. 6V-3940 M [1] BOLT (M8X1.25X25-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP53830102
 

159-0303: PLUG GP-CYLINDER BLOCK

159-0303 PLUG GP-CYLINDER BLOCK
S/N TX71-UP; KHX4087-UP
PART OF 290-0756, 387-8487 ENGINE AR, 290-0754, 423-3918, 435-1295 ENGINE AR-COMPLETE
i01674450 SEBP5383
1590303 PLUG GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 329D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-0293 M [1] BOLT (M12X1.75X20-MM)  
2. 6F-7062 [1] WASHER (12.7X19.05X1.83-MM THK)  
3. 398-5612 [2] PLUG AS  
    (EACH INCLUDES)
  6V-5063 [1] SEAL-O-RING  
  360-3682 [1] PLUG-O-RING  
  M   METRIC PART
 

#SEBP53830103
 

162-8068: PLUG GP-ENGINE

162-8068 PLUG GP-ENGINE
S/N TX71-UP; KHX4087-UP
PART OF 290-0756, 387-8487 ENGINE AR, 290-0754, 423-3918, 435-1295 ENGINE AR-COMPLETE
i01674456 SEBP5383
1628068 PLUG GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 329D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 396-0405 [1] PLUG AS  
  6V-6609 [1] SEAL-O-RING  
  360-3680 [1] PLUG  
 

#SEBP53830104
 

233-1125: PULLEY GP

233-1125 PULLEY GP
S/N DJF1-UP
PART OF 229-1786, 229-1787, 419-0571 COOLING AR-HIGH AMBIENT TEMP
i02575703 SEBP5383
2331125 PULLEY GP Parts scheme
  For full view, you need register

Parts for your 329D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 374-8478 [1] BELT-SERPENTINE  
2. 290-2778 [1] PULLEY-FAN  
3. 6V-5215 M [6] BOLT (M8X1.25X16-MM)  
  M   METRIC PART
 

#SEBP53830105
 

263-1848: PULLEY GP

263-1848 PULLEY GP
S/N DJF248-UP; BYS703-UP; KHX4087-19598
PART OF 266-6261, 290-0756 ENGINE AR, 290-0754 ENGINE AR-COMPLETE
i02585663 SEBP5383
2631848 PULLEY GP Parts scheme
  For full view, you need register

Parts for your 329D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 291-0515 C [1] PULLEY-FAN  
2. 374-8479 C [1] BELT-SERPENTINE  
3. 6V-5217 CM [6] BOLT (M8X1.25X20-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP53830106
 

256-3831: ROCKER ARM GP

256-3831 ROCKER ARM GP
S/N TX71-UP; KHX4088-UP
PART OF 256-3830 VALVE MECHANISM GP
i02598540 SEBP5383
2563831 ROCKER ARM GP Parts scheme
  For full view, you need register

Parts for your 329D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 256-3832 [1] ROCKER ARM AS (EXHAUST)  
2. 260-7524 M [1] SCREW-VALVE ADJUSTMENT (M10X1.5-THD)  
3. 2Y-5829 M [1] NUT (M10X1.5-THD)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP53830107
 

256-3834: ROCKER ARM GP

256-3834 ROCKER ARM GP
S/N TX71-UP; KHX4088-UP
PART OF 256-3830 VALVE MECHANISM GP
i02598458 SEBP5383
2563834 ROCKER ARM GP Parts scheme
  For full view, you need register

Parts for your 329D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 260-7524 M [1] SCREW-VALVE ADJUSTMENT (M10X1.5-THD)  
2. 256-3835 [1] ROCKER ARM AS (INLET)  
3. 2Y-5829 M [1] NUT (M10X1.5-THD)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP53830108
 

115-4203: SEAL GP-CRANKSHAFT

115-4203 SEAL GP-CRANKSHAFT
S/N TX71-UP; KHX4087-UP
PART OF 290-0756, 387-8487 ENGINE AR, 290-0754, 423-3918, 435-1295 ENGINE AR-COMPLETE
i01674446 SEBP5383
1154203 SEAL GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 329D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-4109 [1] SEAL GP-CRANKSHAFT (REAR)  
2. 119-2921 [1] SEAL GP-CRANKSHAFT (FRONT)(FRONT)  
3. 4R-9999 [1] EXCLUDER-CRANKSHAFT SEAL  
 

#SEBP53830109
 

232-3717: VALVE MECHANISM GP

232-3717 VALVE MECHANISM GP
S/N TX71-UP; KHX4088-UP
PART OF 270-4212, 270-4213, 387-8535 ENGINE AR-CORE
i03534960 SEBP5383
2323717 VALVE MECHANISM GP Parts scheme
  For full view, you need register

Parts for your 329D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 264-6156 C [12] ROD-VALVE PUSH  
2. 219-3309 [6] BRIDGE-VALVE  
3. 139-4081 Y [3] LIFTER GP-VALVE  
4. 8T-8442 M [12] BOLT-SOCKET HEAD (M6X1X30-MM)  
5. 3E-9412 [6] DOWEL  
6. 256-3830 CY [1] VALVE MECHANISM GP  
7. 6V-5696 M [11] BOLT (M12X1.75X80-MM)  
8. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
9. 3H-7654 [9] WASHER-HARD (13.5X22.5X3-MM THK)  
10. 8T-0100 M [2] BOLT (M8X1.25X60-MM)  
11. 232-1754 [1] CLIP  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Specifications
Connecting Rod Bearing Journal
C7 Engines for Caterpillar Built Machines
Piston and Rings
C7 Engines for Caterpillar Built Machines
Piston and Rings
C7 Engines for Caterpillar Built Machines
Piston Cooling Jet
C7 Engines for Caterpillar Built Machines
Piston Cooling Jet
C7 Engines for Caterpillar Built Machines
Piston and Rings
C7 Engines for Caterpillar Built Machines
Connecting Rod
C7 Engines for Caterpillar Built Machines
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Testing and Adjusting
Engine Crankcase Pressure (Blowby) - Test
C7 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Inspect
C7 Engines for Caterpillar Built Machines
Piston Ring Groove - Inspect
C7 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
C7 Engines for Caterpillar Built Machines
Compression - Test
C7 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C7
Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C7
Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Remove
C7
Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Install
C7
Engines for Caterpillar Built Machines
Connecting Rod Bearings - Remove
C7
Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Disassemble
C7
Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Assemble
C7
Engines for Caterpillar Built Machines
Connecting Rod Bearings - Install
C7
Engines for Caterpillar Built Machines
Service Magazine
New Fractured Connecting Rod is Now Available for Certain Engines {1218}
New Fractured Connecting Rod is Now Available for Certain Engines {1218}

Caterpillar Parts SIS Catalog 329D :

PAN GP-OIL
176-9429 PAN GP-OIL
MOUNTING GP-STARTING MOTOR
435-4831 MOUNTING GP-STARTING MOTOR
MOUNTING GP-ENGINE
233-1120 MOUNTING GP-ENGINE
LIFTING GP-ENGINE
142-8100 LIFTING GP-ENGINE
LIFTER GP-VALVE
139-4081 LIFTER GP-VALVE
453-2206 KIT-FRONT COVER GASKET
439-8620 KIT-FRONT COVER GASKET
453-2204 KIT-ENGINE GASKET
PISTON & ROD GP
212-3652 PISTON & ROD GP
PLUG GP-CYLINDER BLOCK
159-0303 PLUG GP-CYLINDER BLOCK
PLUG GP-ENGINE
162-8068 PLUG GP-ENGINE
PULLEY GP
233-1125 PULLEY GP
PULLEY GP
263-1848 PULLEY GP
ROCKER ARM GP
256-3831 ROCKER ARM GP
ROCKER ARM GP
256-3834 ROCKER ARM GP
SEAL GP-CRANKSHAFT
115-4203 SEAL GP-CRANKSHAFT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.