AVSPARE.COM
parts catalog

169-3105 PLUG GP-ENGINE S/N TXD101-4715; THX5497-UP REQUIRED WHEN NO AIR COMPRESSOR IS USED PART OF 224-9843 ENGINE AR, 290-0760, 391-1071, 391-1075 ENGINE AR-COMPLETE ALSO AN ATTACHMENT 336D




BASIC ENGINE

CYLINDER BLOCK GP
 

#SEBP53850240
 

169-3105: PLUG GP-ENGINE

169-3105 PLUG GP-ENGINE
S/N TXD101-4715; THX5497-UP
REQUIRED WHEN NO AIR COMPRESSOR IS USED
PART OF 224-9843 ENGINE AR, 290-0760, 391-1071, 391-1075 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i01534247 SEBP5385
  For full view, you need register

Parts for your 336D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 389-3709 [1] PLUG AS  
  238-5082 [1] SEAL-O-RING  
  360-3682 [1] PLUG-O-RING  
2. 389-3708 [2] PLUG AS  
    (EACH INCLUDES)
  214-7568 [1] SEAL-O-RING  
  360-3679 [1] PLUG-CONNECTOR (9/16-18-THD)  
3. 398-5596 [2] PLUG AS  
    (EACH INCLUDES)
  238-5080 [1] SEAL-O-RING  
  360-3680 [1] PLUG  
 

#SEBP53850241
 

469-0624: PLUG GP-ENGINE

469-0624 PLUG GP-ENGINE
S/N TXD4716-UP
PART OF 391-1071, 391-1075 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i05942378 SEBP5385
  For full view, you need register

Parts for your 336D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 389-3709 [1] PLUG AS  
  238-5082 [1] SEAL-O-RING  
  360-3682 [1] PLUG-O-RING  
2. 389-3708 [2] PLUG AS  
    (EACH INCLUDES)
  214-7568 [1] SEAL-O-RING  
  360-3679 [1] PLUG-CONNECTOR (9/16-18-THD)  
3. 398-5596 [2] PLUG AS  
    (EACH INCLUDES)
  238-5080 [1] SEAL-O-RING  
  360-3680 [1] PLUG  
 

#SEBP53850242
 

213-9320: ROCKER ARM GP

213-9320 ROCKER ARM GP -EXHAUST
S/N TXD101-UP; THX5497-UP
PART OF 212-8926 VALVE MECHANISM GP
ALSO AN ATTACHMENT
i01638866 SEBP5385
  For full view, you need register

Parts for your 336D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 544-0520 [1] ROCKER ARM AS (EXHAUST)  
2. 260-7524 M [1] SCREW-VALVE ADJUSTMENT (M10X1.5-THD)  
3. 2Y-5829 M [1] NUT (M10X1.5-THD)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP53850243
 

242-0329: ROCKER ARM GP

242-0329 ROCKER ARM GP -INLET
S/N TXD101-UP; THX5497-UP
PART OF 212-8926 VALVE MECHANISM GP
ALSO AN ATTACHMENT
i02376584 SEBP5385
  For full view, you need register

Parts for your 336D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 260-7524 M [1] SCREW-VALVE ADJUSTMENT (M10X1.5-THD)  
2. 544-0521 [1] ROCKER ARM AS  
3. 2Y-5829 M [1] NUT (M10X1.5-THD)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP53850244
 

178-3899: SEAL GP-CRANKSHAFT

178-3899 SEAL GP-CRANKSHAFT
S/N TXD101-UP; THX5497-UP
PART OF 224-9843 ENGINE AR, 290-0760, 391-1071, 391-1075 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i01533639 SEBP5385
  For full view, you need register

Parts for your 336D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4R-9999 [1] EXCLUDER-CRANKSHAFT SEAL  
2. 206-3719 M [9] BOLT AS  
3. 245-7339 [1] SEAL-CRANKSHAFT (FRONT)  
4. 285-4073 [1] SEAL GP-CRANKSHAFT (REAR)  
  M   METRIC PART
 

#SEBP53850245
 

212-8926: VALVE MECHANISM GP

212-8926 VALVE MECHANISM GP
S/N TXD101-UP; THX5497-UP
PART OF 242-0447 VALVE MECHANISM GP
ALSO AN ATTACHMENT
i02376576 SEBP5385
  For full view, you need register

Parts for your 336D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 163-2445 [1] SHAFT AS-ROCKER ARM  
  8F-6575 [2] PLUG-CUP  
2. 163-2459 [6] SPRING  
3. 164-5669 [2] STAND (END)  
4. 176-5913 [4] STAND (MIDDLE)  
5. 176-5914 [1] STAND (OIL)  
6. 213-9320 Y [6] ROCKER ARM GP (EXHAUST)  
7. 242-0329 Y [6] ROCKER ARM GP (INLET)  
8. 5P-8245 [7] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 8T-0646 M [7] BOLT (M12X1.75X110-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP53850246
 

242-0447: VALVE MECHANISM GP

242-0447 VALVE MECHANISM GP
S/N THX5497-39615
PART OF 229-2665, 270-4216, 348-2746, 348-2747, 384-3426 ENGINE AR-CORE
ALSO AN ATTACHMENT
i02374653 SEBP5385
  For full view, you need register

Parts for your 336D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 304-5260 [12] SPRING-GUIDE  
2. 264-6156 [12] ROD-VALVE PUSH  
3. 163-2437 [12] LIFTER AS-VALVE  
4. 212-8926 Y [1] VALVE MECHANISM GP  
5. 244-5891 [6] BRIDGE-VALVE  
6. 255-8674 [6] BRIDGE-VALVE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP53850247
 

242-0447: VALVE MECHANISM GP

242-0447 VALVE MECHANISM GP
S/N TXD101-UP; THX39616-UP
PART OF 384-3426, 387-8534 ENGINE AR-CORE
ALSO AN ATTACHMENT
i05258755 SEBP5385
  For full view, you need register

Parts for your 336D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 467-4243 C [12] SPRING-GUIDE  
2. 264-6156 [12] ROD-VALVE PUSH  
3. 453-5998 C [12] LIFTER AS-VALVE  
4. 212-8926 Y [1] VALVE MECHANISM GP  
5. 244-5891 [6] BRIDGE-VALVE  
6. 255-8674 [6] BRIDGE-VALVE  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP53850248
 

187-0474: FILTER GP-ENGINE OIL

187-0474 FILTER GP-ENGINE OIL
S/N THX5497-UP
PART OF 224-9843 ENGINE AR, 290-0760 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i02869754 SEBP5385
  For full view, you need register

Parts for your 336D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-1493 [2] VALVE AS-BYPASS (ENGINE OIL FILTER BASE)  
2. 9M-1974 [12] WASHER-HARD (8.8X16X2-MM THK)  
3. 102-5828 [1] COVER  
4. 102-5829 [1] ADAPTER  
5. 209-7290 [1] GASKET  
6. 209-7291 [1] BASE AS-OIL FILTER (ENGINE)  
  2P-4304 [1] STUD-HOLLOW  
7. 8C-3445 [1] CAP-DUST  
8. 275-6631 [1] BASE AS-OIL FILTER (ENGINE)  
  2P-4304 [1] STUD-HOLLOW  
9. 307-6480 CI [1] HOSE AS  
10. 307-6481 CI [1] HOSE AS  
11. 377-9593 [2] PLUG AS  
    (EACH INCLUDES)
  9N-6152 [1] PLUG  
  238-5081 [1] SEAL-O-RING  
12. 377-9595 [1] TEE AS  
  228-7094 [1] SEAL-O-RING  
  238-5084 [1] SEAL-O-RING  
  297-7920 [1] TEE  
13. 145-2264 M [1] STUD (M8X1.25X35-MM)  
14. 1R-1808 [1] FILTER-ENGINE OIL (ADVANCED EFFICIENCY)  
15. 242-3864 [2] SPRING  
16. 6V-5218 M [11] BOLT (M8X1.25X35-MM)  
17. 396-0393 [1] PLUG AS  
  360-3677 [1] PLUG (7/16-20-THD)  
  214-7566 [1] SEAL-O-RING  
18. 309-5137 [2] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8635 [1] CONNECTOR  
  228-7093 [1] SEAL-O-RING  
  238-5084 [1] SEAL-O-RING  
19. 389-3728 [1] PLUG AS  
  360-3684 [1] PLUG  
  238-5084 [1] SEAL-O-RING  
20. 321-8649 [1] VALVE AS-FLUID SAMPLING (ENGINE OIL)  
  8C-3446 [1] VALVE-SAMPLING (ENGINE OIL)  
  214-7566 [1] SEAL-O-RING  
21. 329-5464 [1] CONNECTOR AS  
  8T-7927 [1] CONNECTOR  
  228-7094 [1] SEAL-O-RING  
  238-5084 [1] SEAL-O-RING  
22. 6V-3908 [2] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP53850249
 

385-3503: FILTER GP-ENGINE OIL

385-3503 FILTER GP-ENGINE OIL
S/N TXD101-UP; THX43008-UP
PART OF 391-1071, 391-1075 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i05185996 SEBP5385
  For full view, you need register

Parts for your 336D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-1367 [1] PLUNGER (RELIEF VALVE)  
2. 563-8152 [1] FILTER-ENGINE OIL (ADVANCED EFFICIENCY)  
3. 7C-1493 [1] VALVE AS-BYPASS (ENGINE OIL FILTER BASE)  
4. 209-7290 [1] GASKET (ENGINE OIL FILTER BASE)  
5. 211-3286 [1] BRACKET  
6. 242-3864 [1] SPRING  
7. 359-5999 [1] BASE  
8. 362-3515 [1] BASE AS-OIL FILTER (ENGINE)  
  6V-7604 [1] PLUG-CUP  
9. 377-9593 [1] PLUG AS  
  9N-6152 [1] PLUG  
9A. 238-5081 [1] SEAL-O-RING  
10. 2Y-5829 M [2] NUT (M10X1.5-THD)  
11. 398-5596 [1] PLUG AS  
  360-3680 [1] PLUG  
  238-5080 [1] SEAL-O-RING  
12. 389-3728 [1] PLUG AS  
  360-3684 [1] PLUG  
12A. 238-5084 [1] SEAL-O-RING  
13. 329-5455 [1] PLUG AS  
  9S-8010 [1] PLUG  
  228-7096 [1] SEAL-O-RING  
14. 4N-8150 [1] SPRING  
15. 5P-7970 M [2] NUT (M8X1.25-THD)  
16. 6V-2317 M [2] BOLT (M8X1.25X30-MM)  
17. 6V-3822 M [2] BOLT (M10X1.5X35-MM)  
18. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
19. 8T-0276 M [7] BOLT (M8X1.25X45-MM)  
20. 9M-1974 [12] WASHER-HARD (8.8X16X2-MM THK)  
21. 9X-2098 M [3] STUD-TAPERLOCK (M8X1.25X45-MM)  
  M   METRIC PART
 

Information:

Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Servicing the Pistons, Rings, and Liners in Certain C9 Engines{1213, 1215}
Servicing the Pistons, Rings, and Liners in Certain C9 Engines{1213, 1215}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Specifications
Cylinder Block
C9 Engines for Caterpillar Built Machines
Cylinder Liner
C9 Engines for Caterpillar Built Machines
Main Bearing Journal
C9 Engines for Caterpillar Built Machines
Cylinder Liner Projection
C9 Engines for Caterpillar Built Machines
Cylinder Block Cover Group
C9 Engines for Caterpillar Built Machines
Piston Cooling Jet
C9 Engines for Caterpillar Built Machines
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Cylinder Block - Inspect
C9 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
C9 Engines for Caterpillar Built Machines
Main Bearings - Inspect
C9 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C9 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C9 Engines for Caterpillar Built Machines
Cylinder Liner - Remove
C9 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement
Crankshaft Front Seal - Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement
Crankshaft Main Bearings - Remove
C9 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
C9 Engines for Caterpillar Built Machines
Cylinder Liner - Install
C9 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
C9 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
C9 Engines for Caterpillar Built Machines
Cylinder Block Cover - Remove and Install
C9 Engines for Caterpillar Built Machines
Service Magazine

Caterpillar Parts SIS Catalog 336D :

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.