242-1934 ELBOW GP-AIR INLET S/N TXD101-UP; THX5497-UP PART OF 224-9843 ENGINE AR, 290-0760, 391-1071, 391-1075 ENGINE AR-COMPLETE ALSO AN ATTACHMENT 336D

242-1934 ELBOW GP-AIR INLET
S/N TXD101-UP; THX5497-UP
PART OF 224-9843 ENGINE AR, 290-0760, 391-1071, 391-1075 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT

i02373657 SEBP5385

For full view, you need register

Parts for your 336D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	131-0353 M	[2]	STUD (M8X1.25X82.75-MM)
2.	221-6809	[1]	ELBOW
3.	3E-4352	[2]	WASHER-HARD (8.8X20.5X2.5-MM THK)
4.	8C-5748 M	[5]	BOLT (M8X1.25X55-MM)
5.	8T-0100 M	[1]	BOLT (M8X1.25X60-MM)
6.	9M-1974	[6]	WASHER-HARD (8.8X16X2-MM THK)
7.	1U-8846 B		SEALANT-GASKET
8.	398-5601	[1]	PLUG AS
	238-5081	[1]	SEAL-O-RING
	360-3681	[1]	PLUG (7/8-14-THD)
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP53850291

437-3321: KIT-TURBOCHARGER GASKET

KIT-TURBOCHARGER GASKET

437-3321 KIT-TURBOCHARGER GASKET
S/N PRF1-UP; KKT1-UP
CONTAINS THE GASKETS & SEALS TO REINSTALL THE TURBO(S) & ATTACHING LINES. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS. APPLIES TO TURBO KIT PART NUMBERS 317-8751-UP
FIELD REPLACEMENT FOR 338-3577 KIT-GASKET
FOR USE WITH @@@@@290-0760@@@@@
FIELD INSTALLATION

i05525527 SEBP5385

For full view, you need register

Parts for your 336D EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
1P-0451	[1]	GASKET (TURBOCHARGER)
197-8419	[1]	GASKET (TURBOCHARGER)
3E-8017 M	[4]	LOCKNUT (M10X1.5-THD)
3K-0360	[4]	SEAL-O-RING
5P-7530	[1]	SEAL-O-RING
6V-5048	[1]	SEAL-O-RING
6V-6609	[8]	SEAL-O-RING
214-7568	[2]	SEAL-O-RING
228-7089	[3]	SEAL-O-RING
238-5080	[1]	SEAL-O-RING
418-6781 M	[4]	STUD-TAPERLOCK (M10X1.5X40-MM)

		FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSISST, PLEASE VISIT

		HTTPS://DEALER.CAT.COM/RELATED
M		METRIC PART

#SEBP53850292

230-2898: LINES GP-AIR

LINES GP-AIR

230-2898 LINES GP-AIR -AFTERCOOLER TO TURBOCHARGER
S/N PRF1-UP; KKT1-UP
PART OF 239-6405, 279-7825 INSTALLATION AR-ENGINE

i02648898 SEBP5385

For full view, you need register

Parts for your 336D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	144-0367	[12]	CLAMP-HOSE
2.	230-2933	[1]	HOSE
3.	230-2866 C	[1]	HOSE
4.	375-5658 C	[1]	TUBE AS
5.	230-2939	[1]	BRACKET
6.	230-2940	[1]	HOSE
7.	281-3515 C	[1]	HOSE
8.	281-3512 C	[1]	TUBE AS
9.	265-3561	[1]	SEAL
10.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
11.	8T-4136 M	[7]	BOLT (M10X1.5X25-MM)
12.	7X-7729	[6]	WASHER (11X25X3-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP53850293

239-6406: LINES GP-AIR

LINES GP-AIR

239-6406 LINES GP-AIR -AIR CLEANER TO TURBOCHARGER
S/N PRF1-UP; KKT1-UP
PART OF 239-6405, 279-7825 INSTALLATION AR-ENGINE

i02415198 SEBP5385

For full view, you need register

Parts for your 336D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5L-3233	[1]	FITTING-CONNECTOR
2.	8T-4986	[3]	CLAMP-HOSE
3.	8T-4987	[1]	CLAMP-HOSE
4.	255-2966	[1]	INDICATOR AS-AIR FILTER CHANGE (AIR RESTRICTION)
5.	324-4169	[1]	HOSE
6.	266-6217	[1]	HOSE

#SEBP53850294

255-2915: LINES GP-MUFFLER DRAIN

LINES GP-MUFFLER DRAIN

255-2915 LINES GP-MUFFLER DRAIN
S/N PRF1-397; KKT1-145
PART OF 239-6405 INSTALLATION AR-ENGINE

i02415199 SEBP5385

2552915 LINES GP-MUFFLER DRAIN Parts scheme

For full view, you need register

Parts for your 336D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-4961	[1]	CLAMP-HOSE
2.	7K-1181	[3]	STRAP-CABLE
3.	171-9073	[1]	CLIP
4.	205-6781	[1]	PIPE AS
5.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
6.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
7.	5P-1442 E		HOSE (113-CM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP53850295

324-4134: LINES GP-MUFFLER DRAIN

LINES GP-MUFFLER DRAIN

324-4134 LINES GP-MUFFLER DRAIN
S/N PRF398-1104; KKT146-1055
PART OF 239-6405 INSTALLATION AR-ENGINE

i03596360 SEBP5385

3244134 LINES GP-MUFFLER DRAIN Parts scheme

For full view, you need register

Parts for your 336D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[2]	STRAP-CABLE
2.	7Y-1229	[1]	CONNECTOR
3.	324-4115	[1]	TUBE AS
4.	096-4841	[1]	CLAMP-HOSE
5.	7X-7729	[2]	WASHER (11X25X3-MM THK)
6.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
7.	5P-0767 E		HOSE (82-CM)
8.	225-5714 E		GUARD (20-CM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP53850296

324-4134: LINES GP-MUFFLER DRAIN

LINES GP-MUFFLER DRAIN

324-4134 LINES GP-MUFFLER DRAIN
S/N PRF1105-UP; KKT1056-UP
PART OF 239-6405 INSTALLATION AR-ENGINE

i05340667 SEBP5385

For full view, you need register

Parts for your 336D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[2]	STRAP-CABLE
2.	7Y-1229	[1]	CONNECTOR
3.	385-1353 C	[1]	TUBE AS
4.	096-4841	[1]	CLAMP-HOSE
5.	7X-7729 C	[4]	WASHER (11X25X3-MM THK)
6.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
7.	5P-0767 E		HOSE (82-CM)
8.	225-5714 E		GUARD (20-CM)
9.	385-1351 C	[1]	PLATE AS
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP53850297

165-4444: MANIFOLD GP-EXHAUST

MANIFOLD GP-EXHAUST

165-4444 MANIFOLD GP-EXHAUST
S/N TXD101-UP; THX5497-UP
45 DEGREE DRY EXHAUST MANIFOLD WITH REAR TURBOCHARGER EXHAUST
PART OF 224-9843 ENGINE AR, 290-0760, 391-1071, 391-1075 ENGINE AR-COMPLETE
FOR USE WITH @@@@@165-4465@@@@@
ALSO AN ATTACHMENT

i01881551 SEBP5385

1654444 MANIFOLD GP-EXHAUST Parts scheme

For full view, you need register

Parts for your 336D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9X-6620 M	[12]	LOCKNUT (M10X1.5-THD)
2.	161-3398	[1]	MANIFOLD-EXHAUST
3.	161-3411	[6]	GASKET
4.	192-4697	[1]	MANIFOLD-EXHAUST
5.	203-7775	[1]	MANIFOLD-EXHAUST
6.	116-3715 M	[12]	STUD-TAPERLOCK (M10X1.5X85-MM)
7.	4P-4369	[6]	SPACER (12X19X23.5-MM THK)
8.	6V-5839	[12]	WASHER (11X21X2.5-MM THK)
9.	8T-7044 M	[4]	STUD-TAPERLOCK (M10X1.5X40-MM)
	M		METRIC PART

#SEBP53850298

222-8300: MUFFLER GP

MUFFLER GP

222-8300 MUFFLER GP
S/N PRF1-UP; KKT1-UP
PART OF 266-6263 ENGINE AR

i02377929 SEBP5385

For full view, you need register

Parts for your 336D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	119-5708	[1]	CLIP
2.	193-2839	[1]	PIPE AS
4.	310-9725	[1]	PLATE
5.	205-6642	[1]	MUFFLER AS
6.	239-6494	[1]	SUPPORT AS
7.	488-9787	[1]	BRACKET AS
8.	131-8847	[2]	U-BOLT
9.	241-9265	[1]	CLAMP-MUFFLER
11.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
12.	453-8033	[3]	WASHER-HARD (13.5X30X4-MM THK)
13.	453-3455	[5]	WASHER-HARD (11X25X3-MM THK)
15.	453-3454	[5]	WASHER-HARD (11X21X2.5-MM THK)
16.	455-3798 M	[2]	BOLT (M10X1.5X25-MM)
17.	453-3448 M	[3]	BOLT (M12X1.75X45-MM)
18.	453-3441 M	[5]	BOLT (M10X1.5X50-MM)
19.	457-5821 M	[2]	BOLT (M10X1.5X35-MM)
20.	451-2182	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
21.	8T-4244 M	[8]	NUT (M12X1.75-THD)
22.	453-3446 M	[3]	BOLT (M12X1.75X35-MM)
23.	282-8228	[1]	CLAMP
24.	255-2900	[1]	PIPE AS-EXHAUST
25.	388-7017	[1]	CLAMP-BENT BOLT
	M		METRIC PART