AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

477-8794 PUMP GP-MAIN HYDRAULIC S/N PRF1-UP; KKT1-UP FIELD REPLACEMENT FOR @@@@@434-8188@@@@@ 336D EXCAVATOR


HYDRAULIC SYSTEM
PUMP GP
MOTOR GP
PUMP GP
FILTER GP
SWIVEL GP
TANK GP

EXCAVATOR 336D EXCAVATOR KKT
 336D & 336D L Excavators KKT00001-UP (MACHINE) POWERED BY C9 Engine SEBP5385 336D KKT   (2008)

HYDRAULIC SYSTEM

PUMP GP
PUMP GP-MAIN HYDRAULIC
322-8733 PUMP GP-MAIN HYDRAULIC
PUMP GP-MAIN HYDRAULIC
434-8188 PUMP GP-MAIN HYDRAULIC
PUMP GP-MAIN HYDRAULIC
477-8794 PUMP GP-MAIN HYDRAULIC
PUMP GP-PISTON
259-0815 PUMP GP-PISTON
PUMP GP-PISTON
259-0815 PUMP GP-PISTON
ROTATING GP-PUMP
266-7833 ROTATING GP-PUMP
 

#SEBP53851140
 

477-8794: PUMP GP-MAIN HYDRAULIC

477-8794 PUMP GP-MAIN HYDRAULIC
S/N PRF1-UP; KKT1-UP
FIELD REPLACEMENT FOR @@@@@434-8188@@@@@
i06630341 SEBP5385
4778794 PUMP GP-MAIN HYDRAULIC Parts scheme 4778794 PUMP GP-MAIN HYDRAULIC Parts scheme 4778794 PUMP GP-MAIN HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 336D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 342-1882 [1] PUMP GP-GEAR  
  246-9867 [1] SEAL-O-RING  
  247-8841 M [2] BOLT (M10X1.5X30-MM)  
2. 252-9167 M [8] BOLT-SOCKET HEAD (M8X1.25X30-MM)  
3. 247-8985 [4] DOWEL  
4. 247-8729 [2] COVER  
5. 242-6919 M [2] SETSCREW (M20X2.5X56-MM)  
6. 451-2184 M [2] NUT (M20X2.5-THD)  
7. 6V-8200 M [8] BOLT-SOCKET HEAD (M12X1.75X35-MM)  
8. 7I-8166 [2] STOPPER  
9. 109-1296 [2] SEAL-O-RING  
10. 7I-8172 [2] RING-BACKUP  
11. 242-6914 [2] PISTON-SERVO  
12. 247-8712 [2] PIN AS  
13. 7I-8152 [18] SPRING-CYLINDER  
14. 109-1294 [2] SEAL-O-RING  
15. 7I-8171 [2] RING-BACKUP  
16. 242-6915 [2] STOPPER  
17. 095-0965 [11] PLUG  
18. 095-0966 [2] PLUG  
19. 242-6918 M [2] NUT (M20X2.5-THD)  
20. 200-3292 M [2] SETSCREW (M20X2.5X90-MM)  
21. 264-8266 M [1] BOLT-SOCKET HEAD (M22X2.5X130-MM)  
22. 234-4539 [2] DOWEL  
23. 249-1306 M [10] BOLT-SOCKET HEAD (M22X2.5X60-MM)  
24. 326-4415 [2] GASKET  
25. 110-5525 [4] PLUG  
26. 214-7568 [4] SEAL-O-RING  
27. 295-9656 [2] PISTON AS  
28. 7I-8154 [2] PLATE  
29. 242-6912 [2] PLATE  
30. 242-6913 [2] RETAINER-BALL  
31. 289-8172 [2] SWASHPLATE AS  
32. 7I-8084 [21] PLUG  
33. 311-9548 [4] PLUG  
34. 247-8725 [2] PLATE  
35. 095-0882 [4] PIN-SPRING  
36. 247-8786 [2] DOWEL  
37. 347-6530 [9] SEAL-RECTANGULAR  
38. 295-9695 [1] SEAL-LIP TYPE  
39. 095-0944 [1] RING-RETAINING  
40. 249-6657 [1] SEAL-O-RING  
41. 289-8174 [1] GEAR-DRIVE  
42. 289-8175 [1] GEAR-DRIVEN  
43. 6V-5204 [1] RING-RETAINING  
44. 247-8718 [1] SPACER (44.5X68X3-MM THK)  
45. 289-8173 [1] FLANGE  
46. 8T-0343 M [11] BOLT-SOCKET HEAD (M12X1.75X55-MM)  
47. 8T-4241 [3] RING-RETAINING  
48. 247-8787 [2] RING-RETAINING  
49. 247-8719 [3] SPACER (50X64X3-MM THK)  
50. 322-8734 [1] BODY  
51. 295-9658 [1] BARREL AS  
52. 259-0832 [1] SHAFT-DRIVEN  
53. 247-8715 [2] BEARING-NEEDLE  
54. 295-9659 [1] BLOCK-PORT  
55. 295-9657 [1] BARREL AS  
56. 249-1307 M [2] BOLT-SOCKET HEAD (M22X2.5X95-MM)  
57. 247-8713 [2] BEARING-ROLLER  
58. 8T-9080 M [8] BOLT-SOCKET HEAD (M12X1.75X20-MM)  
59. 295-9512 [1] COVER  
60. 249-6670 [1] SEAL-O-RING  
61. 247-8720 [2] SPACER (95X110X3.2-MM THK)  
62. 247-8717 [2] SPACER (65X90X1-MM THK)  
63. 095-0929 [2] RING-RETAINING  
64. 247-8726 [1] COVER  
65. 259-0831 [1] SHAFT-DRIVE  
66. 206-9291 [2] SEAL-O-RING  
67. 295-9660 Y [2] HEAD GP-PUMP  
68. 225-4518 Y [1] VALVE GP-SOLENOID (PUMP CONTROL)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP53851141
 

259-0815: PUMP GP-PISTON

259-0815 PUMP GP-PISTON
S/N PRF1-UP; KKT1-UP
PART OF 295-9674 PUMP GP-MAIN HYDRAULIC
Type 1
i02407679 SEBP5385
2590815 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your 336D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 191-7581 [1] SHAFT  
2. 8T-9597 [1] RING-RETAINING  
3. 194-9473 [1] RING  
4. 155-9125 [1] BEARING AS-ROLLER  
5. 213-9250 [4] SEAL-O-RING  
6. 9X-6032 M [4] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
7. 191-7583 [1] BEARING-TAPERED  
8. 213-9248 [1] SEAL-O-RING  
9. 191-7582 [1] SHIM (2.5-MM THK)  
10. 266-7833 Y [1] ROTATING GP-PUMP  
11. 9S-8005 [1] PLUG (3/4-16-THD)  
12. 3K-0360 [1] SEAL-O-RING  
13. 155-9134 [2] PLATE  
14. 155-9127 [1] SEAL  
15. 155-9131 [1] SWASHPLATE  
16. 209-5982 Y [1] ACTUATOR GP  
17. 266-7835 [1] COVER  
18. 120-4394 [1] PLUG-BREAK OFF  
19. 137-3780 [2] PLUG  
20. 259-0908 [2] SEAL  
21. 204-2799 [1] DOWEL  
22. 266-7834 [1] HOUSING  
23. 9X-7680 [3] SEAL-O-RING  
24. 8T-8442 M [4] BOLT-SOCKET HEAD (M6X1X30-MM)  
25. 259-0907 Y [1] VALVE GP-PUMP CONTROL (HYDRAULIC FAN)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP53851142
 

259-0815: PUMP GP-PISTON

259-0815 PUMP GP-PISTON
S/N PRF1-UP; KKT1-UP
PART OF 295-9674 PUMP GP-MAIN HYDRAULIC
Type 2
i04807878 SEBP5385
2590815 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your 336D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 191-7581 [1] SHAFT  
2. 8T-9597 [1] RING-RETAINING  
3. 194-9473 [1] RING  
4. 155-9125 [1] BEARING AS-ROLLER  
5. 213-9250 [4] SEAL-O-RING  
6. 9X-6032 M [4] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
7. 191-7583 [1] BEARING-TAPERED  
8. 213-9248 [1] SEAL-O-RING  
9. 191-7582 [1] SHIM (2.5-MM THK)  
10. 266-7833 Y [1] ROTATING GP-PUMP  
11. 9S-8005 [1] PLUG (3/4-16-THD)  
12. 3K-0360 [1] SEAL-O-RING  
13. 155-9134 [2] PLATE  
14. 155-9127 [1] SEAL  
15. 155-9131 [1] SWASHPLATE  
16. 209-5982 Y [1] ACTUATOR GP (HYDRAULIC FAN PUMP)  
17. 266-7835 [1] COVER  
18. 120-4394 [1] PLUG-BREAK OFF  
19. 137-3780 [2] PLUG  
20. 259-0908 [2] SEAL  
21. 204-2799 [1] DOWEL  
22. 266-7834 [1] HOUSING  
24. 8T-8442 M [4] BOLT-SOCKET HEAD (M6X1X30-MM)  
25. 259-0907 Y [1] VALVE GP-PUMP CONTROL (HYDRAULIC FAN)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP53851143
 

233-2530: ROTATING GP-MOTOR

233-2530 ROTATING GP-MOTOR -HYDRAULIC FAN
S/N PRF1-UP; KKT1-UP
PART OF 234-4638, 242-6776 MOTOR GP-PISTON
ALSO AN ATTACHMENT
i02710246 SEBP5385
2332530 ROTATING GP-MOTOR Parts scheme
  For full view, you need register

Parts for your 336D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 259-5501 [9] PISTON AS (ROTATING)  
2. 233-4885 [1] BARREL  
3. 233-2535 [1] PLATE (VALVE)  
4. 259-5503 [1] PLATE  
5. 295-9540 [1] RETAINER-BALL  
6. 233-5125 [1] SPRING  
7. 194-9479 [3] PIN  
8. 194-9480 [1] RING-RETAINING  
9. 194-9481 [1] DISC-THRUST  
 

#SEBP53851144
 

266-7833: ROTATING GP-PUMP

266-7833 ROTATING GP-PUMP
S/N PRF1-UP; KKT1-UP
PART OF 259-0815 PUMP GP-PISTON
i02407730 SEBP5385
2667833 ROTATING GP-PUMP Parts scheme
  For full view, you need register

Parts for your 336D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 155-9137 [1] PLATE  
2. 194-9480 [1] RING-RETAINING  
3. 266-7836 [1] BARREL  
4. 155-9117 [1] SPRING  
5. 194-9481 [1] DISC-THRUST  
6. 194-9479 [3] PIN  
7. 233-4880 [9] PISTON AS  
8. 266-7837 [1] PLATE  
9. 266-7838 [1] GUIDE  
 

#SEBP53851145
 

259-0922: SCREEN GP-HYDRAULIC

259-0922 SCREEN GP-HYDRAULIC -TANK
S/N PRF1-UP; KKT1-UP
PART OF 289-5565 TANK GP-HYDRAULIC
i02292934 SEBP5385
2590922 SCREEN GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 336D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 259-0918 [1] GUIDE  
2. 095-6639 [1] SPRING  
3. 8T-4133 M [2] NUT (M10X1.5-THD)  
4. 129-7784 [1] ROD  
5. 209-6000 [1] SCREEN AS (HYDRAULIC TANK)  
6. 5H-5672 [1] SEAL-O-RING  
  M   METRIC PART
 

#SEBP53851146
 

387-3783: SCREEN GP-HYDRAULIC

387-3783 SCREEN GP-HYDRAULIC -TANK
S/N PRF1-UP; KKT1-UP
PART OF 395-3376 TANK GP-HYDRAULIC
i05097129 SEBP5385
3873783 SCREEN GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 336D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 129-7784 [1] ROD  
2. 209-6000 [1] SCREEN AS (HYDRAULIC TANK)  
3. 259-0918 [1] GUIDE  
4. 095-6639 [1] SPRING  
5. 5H-5672 [1] SEAL-O-RING  
6. 8T-4133 M [2] NUT (M10X1.5-THD)  
  M   METRIC PART
 

#SEBP53851147
 

234-4440: SWIVEL GP

234-4440 SWIVEL GP
S/N PRF1-UP; KKT1-UP
PART OF 239-1617, 239-1618 LINES GP-TRAVEL MOTOR
i02346965 SEBP5385
2344440 SWIVEL GP Parts scheme
  For full view, you need register

Parts for your 336D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7I-7131 [1] RETAINER  
2. 7Y-4817 [1] COVER  
3. 159-7782 [5] SEAL  
4. 225-4548 [1] HOUSING  
5. 225-4549 [1] ROTOR  
6. 095-1625 [3] SEAL-O-RING  
7. 095-1716 [1] SEAL-O-RING  
8. 453-3454 [2] WASHER-HARD (11X21X2.5-MM THK)  
9. 455-3798 M [6] BOLT (M10X1.5X25-MM)  
10. 8T-6759 [1] PLUG-PIPE  
  M   METRIC PART
 

#SEBP53851148
 

239-1611: TANK & FILTER GP-HYDRAULIC

239-1611 TANK & FILTER GP-HYDRAULIC
S/N PRF1-UP; KKT1-UP
310-L (81.89-US GAL)
PART OF 239-1610 TANK & MTG GP-HYDRAULIC
Type 2
i03694820 SEBP5385
2391611 TANK & FILTER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 336D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 337-1277 C [1] PLATE  
3. 289-5565 Y [1] TANK GP-HYDRAULIC  
4. 275-1362 [1] BRACKET  
5. 289-8194 Y [1] FILTER GP-OIL (HYDRAULIC, CASE DRAIN)  
6. 158-8987 Y [1] FILTER & VALVE GP-PILOT (HYDRAULIC OIL)  
7. 164-5567 [1] COUPLER AS-QUICK DISCONNECT (MALE)  
  3J-1907 [1] SEAL-O-RING  
  6V-3965 [1] FITTING (QUICK DISCONNECT)  
8. 164-5590 [1] VALVE AS-FLUID SAMPLING (PILOT OIL)  
  3J-7354 [1] SEAL-O-RING  
  8C-3446 [1] VALVE-SAMPLING  
9. 188-4140 Y [1] FILTER GP-OIL (HYDRAULIC RETURN)  
10. 8T-7971 [2] WASHER-HARD (13.5X25.5X5-MM THK)  
11. 6J-2680 [1] SEAL-O-RING  
12. 6V-0852 [1] CAP-DUST  
13. 8C-3451 [1] CAP-DUST (HYDRAULIC OIL)  
14. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
15. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
16. 8T-4183 M [6] BOLT (M12X1.75X40-MM)  
18. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
19. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
20. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
21. 8T-4908 M [4] BOLT (M8X1.25X25-MM)  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP53851149
 

239-1611: TANK & FILTER GP-HYDRAULIC

239-1611 TANK & FILTER GP-HYDRAULIC
S/N PRF1-UP; KKT1-UP
310-L (81.89-US GAL)
PART OF 239-1610 TANK & MTG GP-HYDRAULIC
Type 1
i02682536 SEBP5385
2391611 TANK & FILTER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 336D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 292-7299 C [1] SUPPORT AS  
3. 289-5565 Y [1] TANK GP-HYDRAULIC  
4. 275-1362 [1] BRACKET  
5. 289-8194 CY [1] FILTER GP-OIL (HYDRAULIC, CASE DRAIN)  
6. 158-8987 Y [1] FILTER & VALVE GP-PILOT (HYDRAULIC OIL)  
7. 164-5567 [1] COUPLER AS-QUICK DISCONNECT (MALE)  
  3J-1907 [1] SEAL-O-RING  
  6V-3965 [1] FITTING (QUICK DISCONNECT)  
8. 164-5590 [1] VALVE AS-FLUID SAMPLING (PILOT OIL)  
  3J-7354 [1] SEAL-O-RING  
  8C-3446 [1] VALVE-SAMPLING  
9. 188-4140 Y [1] FILTER GP-OIL (HYDRAULIC RETURN)  
10. 8T-7971 [2] WASHER-HARD (13.5X25.5X5-MM THK)  
11. 6J-2680 [1] SEAL-O-RING  
12. 6V-0852 [1] CAP-DUST  
13. 8C-3451 [1] CAP-DUST (HYDRAULIC OIL)  
14. 8T-4121 C [7] WASHER-HARD (11X21X2.5-MM THK)  
15. 8T-4136 CM [3] BOLT (M10X1.5X25-MM)  
16. 8T-4183 M [6] BOLT (M12X1.75X40-MM)  
18. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
19. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
20. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
21. 8T-4908 M [4] BOLT (M8X1.25X25-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Troubleshooting Oil Leakage on the Main Pump on Certain Excavators {5070}
Troubleshooting Oil Leakage on the Main Pump on Certain Excavators {5070}
Technical Information Bulletin
Delay of Travel Speed Shift to High Speed on 319D to 336D Excavators and 319E to 336E Excavators{5070, 7610, 7620}
Delay of Travel Speed Shift to High Speed on 319D to 336D Excavators and 319E to 336E Excavators{5070, 7610, 7620}
Wear on Swash Plate Support in Side By Side Pumps on Certain Excavators{5070}
Wear on Swash Plate Support in Side By Side Pumps on Certain Excavators{5070}
Oil Leakage After Main Pump Shaft Seal Replacement {0663, 5070}
Oil Leakage After Main Pump Shaft Seal Replacement {0663, 5070}
Specifications
Fan Drive Pump
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications
Fan Drive Pump
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications
Pump Control Valve (Hydraulic Fan) - Pressure Compensator
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications
Auxiliary Pump Drive and Mounting
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications
Pump Control Valve
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications
Gear Pump
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications
Main Hydraulic Pump
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications
Fan Drive Pump
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications
Main Hydraulic Pump
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Systems Operation
Pump Control (Main Hydraulic) - Main Pump Regulator
330D, 336D and 340D Excavators Hydraulic System
Gear Pump (Pilot)
330D, 336D and 340D Excavators Hydraulic System
Solenoid Valve (Proportional Reducing) - Power Shift System
330D, 336D and 340D Excavators Hydraulic System
Main Hydraulic Pump
330D, 336D and 340D Excavators Hydraulic System
Negative Flow Control System
330D, 336D and 340D Excavators Hydraulic System
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Specifications For Hydraulic Piston Pump And Motor Components {3083, 3203, 3221, 3222, 4351, 5058, 5069, 5070, 5117}
Specifications For Hydraulic Piston Pump And Motor Components {3083, 3203, 3221, 3222, 4351, 5058, 5069, 5070, 5117}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Information Release Memo
CAT REMAN EXPANDS HYD GEAR & PISTON PUMP & MOTOR OPTIONS
CAT REMAN EXPANDS HYD GEAR & PISTON PUMP & MOTOR OPTIONS
Testing and Adjusting
Main Hydraulic Pump Air - Purge
330D, 336D and 340D Excavators Hydraulic System
Swing Speed and Overswing on Level Ground - Check
330D, 336D and 340D Excavators Hydraulic System
Swing Speed and Swing Drift on a Slope - Check
330D, 336D and 340D Excavators Hydraulic System
Gear Pump (Pilot) - Test
330D, 336D and 340D Excavators Hydraulic System
Main Pump (Flow) - Test - Constant Horsepower Flow Control for Stage 2 Pump
330D, 336D and 340D Excavators Hydraulic System
Pump Control (Output Flow) - Adjust - Stage 2 Pump
330D, 336D and 340D Excavators Hydraulic System
Pump Control (Negative Flow) - Test - Stage 2 pump
330D, 336D and 340D Excavators Hydraulic System
Pump Control (Negative Flow) - Adjust
330D, 336D and 340D Excavators Hydraulic System
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Disassembly and Assembly
Fan Group (Includes Fan, Fan Guard, Fan Shroud, and Hydraulic Fan Motor) - Remove
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement
Fan Group (Includes Fan, Fan Guard, Fan Shroud, and Hydraulic Fan Motor) - Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement
Engine and Main Hydraulic Pump - Remove
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement
Engine and Main Hydraulic Pump - Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement
Service Magazine
New Plugs Are Now Used for the Main Pump Flange on Certain Excavators and Mobile Hydraulic Power Unit {5070}
2011/02/21
New Piston and Gear Pumps are Now Available for Certain Excavators and Mobile Hydraulic Power Units {5070}
New Piston and Gear Pumps are Now Available for Certain Excavators and Mobile Hydraulic Power Units {5070}
Key Differences Between Similar Double Piston Pump Offerings for Certain Excavators, Forest Machines, and Mobile Hydraulic Power Units {5070}
Key Differences Between Similar Double Piston Pump Offerings for Certain Excavators, Forest Machines, and Mobile Hydraulic Power Units {5070}

Caterpillar Parts SIS Catalog 336D :

PUMP GP-MAIN HYDRAULIC
434-8188 PUMP GP-MAIN HYDRAULIC
PUMP GP-MAIN HYDRAULIC
322-8733 PUMP GP-MAIN HYDRAULIC
PUMP GP-MAIN HYDRAULIC
295-9674 PUMP GP-MAIN HYDRAULIC
PUMP GP-MAIN HYDRAULIC
295-9674 PUMP GP-MAIN HYDRAULIC
PUMP GP-GEAR
207-8236 PUMP GP-GEAR
PUMP GP-GEAR
207-8235 PUMP GP-GEAR
PUMP & MTG GP-MAIN HYDRAULIC
327-7263 PUMP & MTG GP-MAIN HYDRAULIC
PUMP & MTG GP-MAIN HYDRAULIC
310-9486 PUMP & MTG GP-MAIN HYDRAULIC
PUMP GP-PISTON
259-0815 PUMP GP-PISTON
PUMP GP-PISTON
259-0815 PUMP GP-PISTON
ROTATING GP-MOTOR
233-2530 ROTATING GP-MOTOR
ROTATING GP-PUMP
266-7833 ROTATING GP-PUMP
SCREEN GP-HYDRAULIC
259-0922 SCREEN GP-HYDRAULIC
SCREEN GP-HYDRAULIC
387-3783 SCREEN GP-HYDRAULIC
SWIVEL GP
234-4440 SWIVEL GP
TANK & FILTER GP-HYDRAULIC
239-1611 TANK & FILTER GP-HYDRAULIC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.