236-6226 WIRING GP-ELECTRONIC CONTROL S/N THY1-7204 PART OF 224-9843 ENGINE AR 336D L EXCAVATOR

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 236-6226 WIRING GP-
1. 238-1568 WIRING GP-
2. 259-5062 WIRING GP-
3. 269-3410 WIRING GP-
4. 259-4964 WIRING GP-
5. 251-0430 WIRING GP-
6. 238-1570 WIRING GP-

POWER TRAIN

DRIVE GP-FINAL

7. 296-6217 DRIVE GP-F
8. 296-6218 DRIVE GP-F

POWER TRAIN AR

9. 191-2576 POWER TRAI
0. INFORMATION

EXCAVATOR 336D L EXCAVATOR DTS
336D L Excavator DTS00001-UP (MACHINE) POWERED BY C9 Engine SEBP5389 336D L DTS (2008)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

251-0482 WIRING GP-CONVERTER

251-0485 WIRING GP-CONVERTER

236-6226 WIRING GP-ELECTRONIC CONTROL

238-1568 WIRING GP-FINE SWING

259-5062 WIRING GP-FUEL SYSTEM

269-3410 WIRING GP-HEATER

#SEBP53890250

236-6226: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

236-6226 WIRING GP-ELECTRONIC CONTROL
S/N THY1-7204
PART OF 224-9843 ENGINE AR

i02676099 SEBP5389

2366226 WIRING GP-ELECTRONIC CONTROL Parts scheme

For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[19]	STRAP-CABLE
3.	215-3249	[1]	HARNESS AS-ENGINE (UNIT INJECTOR)
	3S-2093	[5]	STRAP-CABLE
	105-1797	[5]	MOUNT
	144-1636	[12]	PIN-CONNECTOR (14-GA TO 18-GA)
	191-7823	[1]	RECEPTACLE AS
	307-8428	[1]	GASKET
4.	235-8202	[1]	HARNESS AS-ENGINE (ELECTRONIC CONTROL MODULE)
	305-5362	[4]	TERMINAL AS (18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[83]	PLUG-SEAL
	100-3320	[1]	PLUG AS-CONNECTOR (2-PIN)
	111-2416	[1]	PLUG AS-CONNECTOR (2-PIN)
			(EACH PLUG AS INCLUDES)
	126-5011	[1]	SEAL-CONNECTOR
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(33-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[3]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	172-6062	[1]	PLUG AS-CONNECTOR (18-PIN)
	180-9339	[3]	PIN-CONNECTOR (14-GA TO 18-GA)
	126-1767	[1]	PIN-CONNECTOR (14-GA TO 16-GA)
	180-9340	[72]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	211-6807	[1]	COVER-CONNECTOR
	8T-8737	[12]	PLUG-SEAL
	264-5732	[1]	PLUG AS-CONNECTOR (120-PIN)
	288-7324	[1]	SEAL-CONNECTOR
5.	4P-7581 C	[6]	CLIP (LADDER)
6.	4P-8134	[2]	CLIP (LADDER)
7.	5P-7970 M	[3]	NUT (M8X1.25-THD)
8.	6V-4369	[1]	CLIP
9.	6V-5217 M	[1]	BOLT (M8X1.25X20-MM)
10.	6V-5839	[3]	WASHER (11X21X2.5-MM THK)
11.	6V-6317 M	[2]	BOLT (M10X1.5X20-MM)
12.	7I-2272 M	[2]	BOLT (M5X0.8X12-MM)
13.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
14.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
15.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
16.	8T-5451 M	[1]	BOLT (M6X1X12-MM)
17.	9M-1974	[3]	WASHER-HARD (8.8X16X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP53890251

238-1568: WIRING GP-FINE SWING

WIRING GP-FINE SWING

238-1568 WIRING GP-FINE SWING
S/N DTS1-UP
PART OF 333-7941 CHASSIS AR

i02373367 SEBP5389

2381568 WIRING GP-FINE SWING Parts scheme

For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	111-4836	[4]	CLIP
2.	111-4837	[3]	CLIP
3.	275-6865	[1]	HARNESS AS-SOLENOID (FINE SWING)
4.	238-2171	[1]	BRACKET AS
5.	8T-4121	[7]	WASHER-HARD (11X21X2.5-MM THK)
6.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
7.	8T-4137 M	[6]	BOLT (M10X1.5X20-MM)
	M		METRIC PART

#SEBP53890252

259-5062: WIRING GP-FUEL SYSTEM

WIRING GP-FUEL SYSTEM

259-5062 WIRING GP-FUEL SYSTEM -PRIMING PUMP
S/N DTS1-UP
PART OF 247-7501 PUMP GP-FUEL PRIMING
AN ATTACHMENT

i02487024 SEBP5389

2595062 WIRING GP-FUEL SYSTEM Parts scheme

For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093 C	[10]	STRAP-CABLE
2.	7K-1181	[16]	STRAP-CABLE
3.	137-6606	[1]	FILM-IDENTIFICATION (FUEL)
4.	165-5970 Y	[1]	SWITCH GP-TOGGLE (FUEL PRIMING PUMP)
5.	275-6938 C	[1]	HARNESS AS-PUMP (FUEL PRIMING)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS,WEDGE & INTERFACE SEAL)
	243-4507	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP53890253

269-3410: WIRING GP-HEATER

WIRING GP-HEATER

269-3410 WIRING GP-HEATER -AIR INLET MANIFOLD
S/N THY1-UP
PART OF 224-9843 ENGINE AR

i02404833 SEBP5389

For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[1]	STRAP-CABLE
2.	398-0940 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(AIR INLET HEATER RELAY)
3.	224-1377	[1]	CABLE AS
4.	283-1226	[1]	BRACKET AS
5.	208-9277 M	[2]	BOLT-FLANGE HEAD (M6X1X20-MM)
6.	6V-5839	[2]	WASHER (11X21X2.5-MM THK)
7.	6V-6317 M	[1]	BOLT (M10X1.5X20-MM)
8.	6V-4248 M	[1]	BOLT (M10X1.5X25-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP53890254

259-4964: WIRING GP-MEDIUM PRESSURE

WIRING GP-MEDIUM PRESSURE

259-4964 WIRING GP-MEDIUM PRESSURE
S/N DTS1-UP
PART OF 255-5822 CONTROL AR-AUXILIARY
AN ATTACHMENT

i02389279 SEBP5389

2594964 WIRING GP-MEDIUM PRESSURE Parts scheme

For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[6]	STRAP-CABLE
2.	7K-1181	[3]	STRAP-CABLE
3.	102-7886	[1]	SPACER (11X20X80-MM THK)
4.	204-1611	[1]	STRAP (DUAL)
5.	259-5125	[1]	HARNESS AS-CONTROL
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	243-4508	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
6.	132-5789	[1]	CLIP (LADDER)
7.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
8.	8T-4198 M	[1]	BOLT (M10X1.5X100-MM)
	M		METRIC PART

#SEBP53890255

251-0430: WIRING GP-PLATFORM

WIRING GP-PLATFORM

251-0430 WIRING GP-PLATFORM
S/N DTS1-UP
PART OF 229-9072 OPERATOR AR

i02296219 SEBP5389

For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[6]	STRAP-CABLE
2.	7G-1060	[1]	STRAP AS-GROUND
3.	7K-1181	[16]	STRAP-CABLE
4.	111-4836	[4]	CLIP
5.	111-4838	[2]	CLIP
6.	111-4839	[2]	STRAP
7.	116-0118	[14]	CLIP
8.	234-1122	[1]	COVER
9.	251-0299	[1]	HARNESS AS-SWITCH (SECONDARY SHUTDOWN)
	2L-8074	[2]	TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
10.	264-7095	[1]	HARNESS AS-PLATFORM
	102-8802	[5]	KIT-RECEPTACLE (2-PIN)
	8T-8729	[13]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[25]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[23]	STRAP-CABLE
	8T-8737	[39]	PLUG-SEAL
	102-7964	[1]	PLUG-CONNECTOR (16-PIN)
	102-7965	[14]	TERMINAL (FEMALE)
	9W-0852	[7]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[2]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	116-0255	[1]	TERMINAL-BLADE (10-GA TO 20-GA)
	119-3662 BE		TUBE-HEAT SHRINK (10.85-MM DIA)
	121-1039	[1]	TERMINAL (MALE)
	121-1168	[2]	CONNECTOR-RECEPTACLE
	121-1173	[32]	TERMINAL (MALE)
	125-4766	[1]	PLUG-CONNECTOR (17-PIN)
	125-4841	[1]	WEDGE-PLUG LOCK (21-PIN)
	125-7874 BE		TUBE-HEAT SHRINK (5.72-MM DIA)
	125-7875 BE		TUBE-HEAT SHRINK (7.44-MM DIA)
	9X-3402	[97]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[97]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	126-1768	[10]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	2L-8050	[2]	TERMINAL-RING (6-GA, 1/4-IN SCREW)
			-OR-
	2L-8058	[2]	TERMINAL-RING (8-GA, 1/4-IN SCREW)
	2L-8052	[1]	TERMINAL-RING (6-GA, 3/8-IN SCREW)
			-OR-
	2L-8060	[1]	TERMINAL-RING (8-GA, 3/8-IN SCREW)
	2L-8069	[4]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	134-3296	[1]	HOUSING-PLUG
	134-3297	[2]	SEAL
	9X-3401	[25]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[25]	PIN-CONNECTOR (14-GA TO 16-GA)
	153-2620	[1]	PLUG AS-CONNECTOR (54-PIN, BLACK)
	155-2270	[12]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[2]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	197-4385	[3]	DIODE
	230-4009	[3]	PLUG AS-CONNECTOR (12-PIN)
	230-4011	[4]	PLUG AS-CONNECTOR (2-PIN)
	230-5010	[3]	PLUG AS-CONNECTOR (6-PIN)
	238-2363	[10]	TERMINAL (FEMALE)
	238-2366	[7]	TERMINAL (MALE)
	243-4505	[2]	RECEPTACLE AS-CONNECTOR (2-PIN)
	243-4507	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
	243-4508	[4]	RECEPTACLE AS-CONNECTOR (6-PIN)
	243-4509	[1]	RECEPTACLE AS-CONNECTOR (8-PIN)
	243-4510	[2]	RECEPTACLE AS-CONNECTOR (12-PIN)
11.	095-0728 M	[2]	SCREW-MACHINE (M4X0.7X12-MM)
12.	096-6166	[2]	WASHER-HARD (4.5X9X1-MM THK)
13.	3E-5169	[1]	GUARD-SWITCH
14.	4D-1836	[1]	SWITCH-TOGGLE (SECONDARY SHUTDOWN)
15.	7X-2621 M	[7]	BOLT (M10X1.5X12-MM)
16.	8T-4121	[14]	WASHER-HARD (11X21X2.5-MM THK)
17.	8T-4137 M	[7]	BOLT (M10X1.5X20-MM)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP53890256

238-1570: WIRING GP-REFUELING PUMP

WIRING GP-REFUELING PUMP

238-1570 WIRING GP-REFUELING PUMP
S/N DTS1-UP
PART OF 229-1784 PUMP AR-FUEL TRANSFER
AN ATTACHMENT

i03161300 SEBP5389

2381570 WIRING GP-REFUELING PUMP Parts scheme

For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[16]	STRAP-CABLE
2.	9X-3495	[1]	CLIP AS
3.	149-5050	[1]	RELAY (24-VOLT)(REFUELING PUMP, STOP)
3A.	149-5050	[1]	RELAY (24-VOLT)(REFUELING PUMP, START)
4.	213-0772	[1]	SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)
5.	238-1579	[1]	HARNESS AS-PUMP (REFUELING)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[3]	STRAP-CABLE
	8T-8737	[1]	PLUG-SEAL
	116-0126	[1]	HOUSING-PLUG
	116-0128	[2]	SEAL
	116-0255	[2]	TERMINAL-BLADE (10-GA TO 20-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	121-1038	[1]	HOUSING-RECEPTACLE
	121-1039	[2]	TERMINAL (MALE)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	2L-8065	[1]	TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)
	2L-8067	[2]	TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)
	2L-8075	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
	149-5051	[2]	CONNECTOR-RECEPTACLE
	149-5069	[4]	TERMINAL-BLADE (14-GA TO 20-GA)
	149-5070	[4]	TERMINAL-BLADE (16-GA TO 20-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	197-4385	[1]	DIODE
	230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
6.	319-1335 C	[1]	HARNESS AS-WIRING
	8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
7.	238-1594 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)
8.	238-1596 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)
9.	096-2591 M	[2]	SCREW-MACHINE (M5X0.8X35-MM)
10.	7X-2619 M	[2]	BOLT (M6X1X10-MM)
11.	8T-0328 C	[2]	WASHER-HARD (5.5X10X1-MM THK)
12.	8T-4199 M	[1]	BOLT (M8X1.25X12-MM)
13.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
14.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
15.	275-6993	[1]	COVER
16.	7K-1181 C	[11]	STRAP-CABLE
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP53890257

296-6217: DRIVE GP-FINAL

DRIVE GP-FINAL

296-6217 DRIVE GP-FINAL -WITH MOTOR
S/N DTS1-UP
PART OF 191-2576 POWER TRAIN AR

i02946278 SEBP5389

For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
296-6218 Y	[1]	DRIVE GP-FINAL (WITHOUT MOTOR)
191-5606 Y	[1]	MOTOR & MTG GP-TRAVEL
Y		SEPARATE ILLUSTRATION

#SEBP53890258

296-6218: DRIVE GP-FINAL

DRIVE GP-FINAL

296-6218 DRIVE GP-FINAL -WITHOUT MOTOR
S/N DTS1-UP
PART OF 296-6217 DRIVE GP-FINAL

i02946635 SEBP5389

For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-2338	[2]	PLUG-PIPE
2.	7Y-0639	[1]	GEAR-SUN (21-TEETH)
3.	7Y-0642	[1]	GEAR-RING (63-TEETH)
4.	7Y-0643	[1]	CARRIER
5.	7Y-0645	[1]	CARRIER
6.	7Y-0659	[3]	GEAR-PLANETARY (22-TEETH)
7.	7Y-0661	[3]	SHAFT-PLANETARY
8.	7Y-0662	[4]	SHAFT-PLANETARY
9.	7Y-0663	[4]	GEAR-PLANETARY (20-TEETH)
10.	7Y-0667	[1]	RING-RETAINING
11.	7Y-0673	[1]	GEAR-RING (73-TEETH)
12.	7Y-0676	[3]	GEAR-PLANETARY (24-TEETH)
13.	7Y-0731	[1]	CARRIER AS
13A.	7Y-0656	[3]	SHAFT-PLANETARY
14.	7Y-1056 BJ	[1]	SHIM (0.8-MM THK)
	7Y-1057 BJ	[1]	SHIM (1-MM THK)
	267-6809 BJ	[1]	SHIM (0.75-MM THK)
	267-6810 BJ	[1]	SHIM (0.85-MM THK)
	267-6811 BJ	[1]	SHIM (0.9-MM THK)
	267-6812 BJ	[1]	SHIM (0.95-MM THK)
	267-6813 BJ	[1]	SHIM (1.2-MM THK)
	267-6814 BJ	[1]	SHIM (1.4-MM THK)
	267-6815 BJ	[1]	SHIM (1.8-MM THK)
	267-6816 BJ	[1]	SHIM (2-MM THK)
	267-6817 BJ	[1]	SHIM (2.3-MM THK)
16.	7Y-1094 M	[14]	WASHER (66X102X1-MM THK)
17.	7Y-5235 M	[20]	BOLT (M24X3X190-MM)
18.	094-0577	[1]	PLATE (7-MM THK)
19.	094-0578	[1]	PLATE (8-MM THK)
20.	094-0579	[1]	PLATE (9-MM THK)
21.	094-0580	[1]	PLATE (10-MM THK)
22.	110-7231	[1]	GEAR-SUN (18-TEETH)
23.	114-1541 J	[6]	PIN-DOWEL
24.	191-2521	[1]	GEAR-SUN (23-TEETH)
25.	191-2526	[1]	COVER
26.	199-4582	[3]	BEARING AS
27.	199-4583	[11]	BEARING AS
28.	227-6190 J	[1]	HOUSING-MOTOR
29.	227-6191 J	[1]	HOUSING (SPROCKET)
30.	227-6192 J	[1]	GEAR-COUPLING (66-TEETH)
31.	255-2272 J	[1]	SEAL GP-DUO-CONE
	205-9114	[2]	RING-TORIC
41.	279-0344 J	[2]	BEARING AS-TAPERED ROLLER
42.	093-1731	[1]	RING-RETAINING
43.	094-0584	[6]	WASHER (40.3X72X1-MM THK)
44.	095-0891	[7]	PIN-SPRING
45.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)
46.	191-2645	[1]	COUPLING
47.	2P-3628	[1]	SEAL-O-RING
48.	6V-8133 JM	[10]	BOLT (M24X3X80-MM)
49.	6V-8237 J	[10]	WASHER (26X44X4-MM THK)
50.	7M-8485	[2]	SEAL-O-RING
51.	7Y-0595	[2]	SPACER (58X79.6X6-MM THK)
52.	7Y-0644	[1]	SPACER (163X190X8-MM THK)
53.	8T-4167	[20]	WASHER-HARD (26X44X4-MM THK)
54.	8T-4240	[3]	RING-RETAINING
55.	9X-6032 M	[12]	BOLT-SOCKET HEAD (M10X1.5X30-MM)
56.	1U-8846 B		SEALANT-GASKET

			AVAILABLE REPAIR KIT(S):
	296-6219 J	[1]	KIT-HOUSING (FINAL DRIVE)
			(ALSO INCLUDES HARD WASHER, BOLTS,COVER, & PLATE AS)
	B		USE AS REQUIRED
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

#SEBP53890259

191-2576: POWER TRAIN AR

POWER TRAIN AR

191-2576 POWER TRAIN AR
S/N DTS1-UP
PART OF 333-7940 GENERAL AR

i03648480 SEBP5389

For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
199-4538 Y	[1]	DRIVE GP-SWING (WITH MOTOR)
		S/N DTS1-99999
333-2958 Y	[1]	DRIVE GP-SWING (WITH MOTOR)
191-2577 Y	[1]	FASTENER GP-SWING & FINAL DR
296-6217 Y	[2]	DRIVE GP-FINAL (WITH MOTOR)
168-6727 Y	[2]	SPROCKET GP (NON-SEGMENTED)
Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Battery Disconnect Switch
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit

Battery or Battery Cable - Inspect/Replace
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit

Battery - Recycle
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit

SmartBoom Operation - If Equipped
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit

SmartBoom Control - If Equipped
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit

Power Receptacle - If Equipped
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit

Fuses - Replace
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}
Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}

Installation of the 270-6106 Auxiliary Control Ar {1408, 1435, 7405, 7553, 7557}
Installation of the 270-6106 Auxiliary Control Ar {1408, 1435, 7405, 7553, 7557}

Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Procedure to Properly Check Window Limiter Switch on Certain Large and Medium Hydraulic Excavators{1408, 7301}
Procedure to Properly Check Window Limiter Switch on Certain Large and Medium Hydraulic Excavators{1408, 7301}

Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Wrong Resistor May be Installed into <NOBR>176-9668</NOBR> Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Service Letter-China

Service Letter-Asia

Systems Operation

Relays
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Senders
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Sensors
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Switches
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Switches
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Sensors
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

Testing and Adjusting

Electrical Connector - Inspect
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Open Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Short Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

System Schematic
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Overload Warning - Set - If Equipped
330D and 336D Excavators Hydraulic System

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

System Schematic
Machine Security System (MSS3i) Integrated

Troubleshooting

Electrical Connectors - Inspect
C7 and C9 Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0164 FMI 03 Injector Actuation Pressure voltage high
C7 and C9 Engines for Caterpillar Built Machines

CID 0091 FMI 08 Throttle Position signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C7 and C9 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0164 FMI 04 Injector Actuation Pressure voltage low
C7 and C9 Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

Fuel Filter Differential Pressure Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Engine Wiring Information
C7 and C9 Engines for Caterpillar Built Machines

CID 2417 FMI 05 Ether Injection Control Solenoid current low
C7 and C9 Engines for Caterpillar Built Machines

CID 2417 FMI 06 Ether Injection Control Solenoid current high
C7 and C9 Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C7 and C9 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C7 and C9 Engines for Caterpillar Built Machines

Air Inlet Heater Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

MID 039 - CID 0096 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0096 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 12
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0588 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 08
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2280 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C7 and C9 Engines for Caterpillar Built Machines

Throttle Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Low Engine Oil Pressure Lamp Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Electrical Component and Connector Locations
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2300 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0600 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CID 0190 FMI 08 Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C7 and C9 Engines for Caterpillar Built Machines

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Investigation of the Liquid Level Switch on the Engine Oil Pan and on the Hydraulic Tank for Excavators {1302, 1408, 5056, 5068, 7422}
2009/08/31

New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
2009/04/13

Inspection Procedure for Switch Panel on Certain Excavators {1408, 7301, 7305, 7306, 7310}
2009/03/09

A New Harness Assembly for the Right Hand Console is Now Available {1408}
2011/04/04

The Connector for the Chassis Harness and the Platform Harness Should Be Tightened to the Specified Torque on Certain Excavators {1408}
2009/08/03

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12