294-1507 STICK GP-HOE S/N DTS1-UP 3.2-M (10.5-FT) PART OF 290-1829 STICK AR-HOE Type 2 AN ATTACHMENT 336D L

IMPLEMENTS

STICK GP

0. 294-1507 STICK GP-H

WORK TOOLS

BUCKET GP

1. 250-6430 ADJUSTER G
2. 4I-4070 ADJUSTER G
3. 7Y-2219 ADJUSTER G
4. 251-3871 BUCKET & A
5. 251-3875 BUCKET & A
6. 270-1282 BUCKET & A
7. 270-1283 BUCKET & A
8. 270-1284 BUCKET & A
9. 270-1285 BUCKET & A
0. INFORMATION

EXCAVATOR 336D L EXCAVATOR DTS
336D L Excavator DTS00001-UP (MACHINE) POWERED BY C9 Engine SEBP5389 336D L DTS (2008)

IMPLEMENTS

STICK GP

290-9318 STICK GP-HOE

294-1507 STICK GP-HOE

#SEBP53890690

294-1507: STICK GP-HOE

STICK GP-HOE

294-1507 STICK GP-HOE
S/N DTS1-UP
3.2-M (10.5-FT)
PART OF 290-1829 STICK AR-HOE
Type 2
AN ATTACHMENT

i04593270 SEBP5389

For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-8489	[3]	FITTING-GREASE (1/8-27 PTF)
2.	5I-3299	[1]	PIN AS
3.	093-0349	[2]	WASHER (22X60X6-MM THK)
4.	093-0363	[1]	SPACER (83X120X12-MM THK)
5.	166-1496	[2]	SEAL-LIP TYPE
6.	235-7679	[2]	SEAL-LIP TYPE
7.	376-5612 C	[1]	STICK & BEARING AS
7A.	228-5617	[2]	BUSHING
7B.	236-8561	[2]	BUSHING
			-OR-
	228-5621	[2]	BUSHING
7C.	241-7231	[2]	BUSHING
8.	093-0366	[1]	SPACER (93X130X12-MM THK)
9.	113-2963	[1]	PIN AS
10.	166-1487	[2]	SHIM (2-MM THK)
11.	166-1498	[2]	SEAL-LIP TYPE
12.	451-2176	[2]	WASHER-HARD (22X35X3.5-MM THK)
13.	453-2844 M	[2]	BOLT (M20X2.5X30-MM)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP53890691

250-6430: ADJUSTER GP-BUCKET

ADJUSTER GP-BUCKET

250-6430 ADJUSTER GP-BUCKET -DB-FAMILY
S/N DTS1-UP
PART OF 270-1282, 270-1283, 270-1284, 270-1285, 270-1286, 270-1292, 270-1295, 270-1303, 270-1304, 270-1307, 270-1309, 270-1310, 270-1312, 270-1313, 292-0404, 294-9980, 299-8470 BUCKET & ADJUSTER GP
AN ATTACHMENT

i02421903 SEBP5389

For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4I-6605 B	[6]	SHIM (1-MM THK)
2.	4I-6604 B	[4]	SHIM (0.5-MM THK)
3.	4I-6626	[1]	PIN
4.	134-8951	[1]	PLATE
5.	7X-2563 M	[5]	BOLT (M20X2.5X60-MM)
6.	8T-4123	[5]	WASHER (3.62X5.75X0.375-MM THK)
7.	250-6457	[1]	FLANGE
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP53890692

4I-4070: ADJUSTER GP-BUCKET

ADJUSTER GP-BUCKET

4I-4070 ADJUSTER GP-BUCKET -G/U/V/TB-FAMILY
S/N DTS1-UP
PART OF 276-1600, 276-1602, 276-1604, 276-1606, 310-8307, 332-8869, 345-3176 BUCKET & ADJUSTER GP
AN ATTACHMENT

i00368919 SEBP5389

For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4I-6626	[1]	PIN
2.	134-8952	[1]	PLATE
3.	250-6448	[1]	FLANGE
4.	4I-4039 B	[6]	SHIM (1-MM THK)
5.	4I-4043 B	[4]	SHIM (0.5-MM THK)
6.	7X-2563 M	[6]	BOLT (M20X2.5X60-MM)
7.	8T-4123	[6]	WASHER (3.62X5.75X0.375-MM THK)
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP53890693

7Y-2219: ADJUSTER GP-BUCKET

ADJUSTER GP-BUCKET

7Y-2219 ADJUSTER GP-BUCKET -B-FAMILY
S/N DTS1-UP
PART OF 251-3871, 251-3875 BUCKET & ADJUSTER GP
AN ATTACHMENT

i00424489 SEBP5389

For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	086-0322 B	[6]	SHIM (1-MM THK)
2.	086-0321 B	[4]	SHIM (0.5-MM THK)
3.	193-5014	[1]	PIN
4.	134-8948	[1]	PLATE
5.	8T-4193 M	[4]	BOLT (M16X2X50-MM)
6.	9X-8257	[4]	WASHER (17.5X30X3.5-MM THK)
7.	193-5015	[1]	FLANGE
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP53890694

251-3871: BUCKET & ADJUSTER GP

BUCKET & ADJUSTER GP

251-3871 BUCKET & ADJUSTER GP -EXCAVATION, B-FAMILY
S/N DTS1-UP
1200-MM (47-IN) WIDE X 1.08-CU M (1.4-CU YD) CAPACITY. K-80 ADAPTERS, (5X)
AN ATTACHMENT

i02434500 SEBP5389

2513871 BUCKET & ADJUSTER GP Parts scheme

For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	251-8663	[1]	EDGE AS
1A.	220-9086	[1]	ADAPTER-TIP (K-80, 2-STRAP, LH)
1B.	220-9084	[3]	ADAPTER-TIP (K-80, 2-STRAP, CENTER)
1C.	220-9085	[1]	ADAPTER-TIP (K-80, 2-STRAP, RH)
1D.	8P-9770	[1]	PLATE
2.	251-8684	[1]	PLATE AS-BOX
3.	251-3523	[2]	PLATE-WEAR
4.	251-8674	[6]	PLATE-WEAR
5.	2C-9259	[2]	PLATE-IDENTIFICATION (CAT)
6.	7Y-2219 Y	[1]	ADJUSTER GP-BUCKET (B-FAMILY)
	Y		SEPARATE ILLUSTRATION

#SEBP53890695

251-3875: BUCKET & ADJUSTER GP

BUCKET & ADJUSTER GP

251-3875 BUCKET & ADJUSTER GP -EXCAVATION, B-FAMILY
S/N DTS1-UP
1500-MM (59-IN) WIDE X 1.41-CU M (1.84-CU YD) CAPACITY. K-80 ADAPTERS, QTY OF 5
AN ATTACHMENT

i02434690 SEBP5389

For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
7Y-2219 Y	[1]	ADJUSTER GP-BUCKET (B-FAMILY)
251-3927 Y	[1]	BUCKET AS-EXCAVATION (B-FAMILY)

2C-9259	[2]	PLATE-IDENTIFICATION (CAT)
		(NAMEPLATE, ONE EACH ON RH & LH SIDES OF BUCKET)
Y		SEPARATE ILLUSTRATION

#SEBP53890696

270-1282: BUCKET & ADJUSTER GP

BUCKET & ADJUSTER GP

270-1282 BUCKET & ADJUSTER GP -EXCAVATION, DB-FAMILY
S/N DTS1-UP
1000-MM (39-IN) WIDE X 1.11-CU M (1.5-CU YD) CAPACITY. K-100 ADAPTERS, QTY OF 4
AN ATTACHMENT

i02421251 SEBP5389

2701282 BUCKET & ADJUSTER GP Parts scheme

For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	264-2663	[1]	EDGE AS
1A.	220-9106	[1]	ADAPTER-TIP (K-100, 2-STRAP, LH)
1B.	220-9104	[2]	ADAPTER-TIP (K-100, 2-STRAP, CENTER)
1C.	220-9105	[1]	ADAPTER-TIP (K-100, 2-STRAP, RH)
1D.	8P-9770	[1]	PLATE
2.	270-1319	[1]	PLATE AS-BOX
3.	264-2703	[2]	PLATE-WEAR
4.	264-2691	[6]	PLATE-WEAR
5.	2C-9259	[2]	PLATE-IDENTIFICATION (CAT)
6.	250-6430 Y	[1]	ADJUSTER GP-BUCKET (DB-FAMILY)
	Y		SEPARATE ILLUSTRATION

#SEBP53890697

270-1283: BUCKET & ADJUSTER GP

BUCKET & ADJUSTER GP

270-1283 BUCKET & ADJUSTER GP -EXCAVATION, DB-FAMILY
S/N DTS1-UP
1350-MM (53-IN) WIDE X 1.62-CU M (2.1-CU YD) CAPACITY. K-100 ADAPTERS, QTY OF 4
AN ATTACHMENT

i02421504 SEBP5389

2701283 BUCKET & ADJUSTER GP Parts scheme

For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	250-9679	[1]	EDGE AS
1A.	220-9106	[1]	ADAPTER-TIP (K-100, 2-STRAP, LH)
1B.	220-9104	[2]	ADAPTER-TIP (K-100, 2-STRAP, CENTER)
1C.	220-9105	[1]	ADAPTER-TIP (K-100, 2-STRAP, RH)
1D.	8P-9770	[1]	PLATE
2.	270-1320	[1]	PLATE AS-BOX
3.	264-2703	[2]	PLATE-WEAR
4.	264-2692	[6]	PLATE-WEAR
5.	2C-9259	[2]	PLATE-IDENTIFICATION (CAT)
6.	250-6430 Y	[1]	ADJUSTER GP-BUCKET (DB-FAMILY)
	Y		SEPARATE ILLUSTRATION

#SEBP53890698

270-1284: BUCKET & ADJUSTER GP

BUCKET & ADJUSTER GP

270-1284 BUCKET & ADJUSTER GP -EXCAVATION, DB-FAMILY
S/N DTS1-UP
1500-MM (59-IN) WIDE X 1.84-CU M (2.4-CU YD) CAPACITY. K-100 ADAPTERS, QTY OF 4
AN ATTACHMENT

i02421738 SEBP5389

2701284 BUCKET & ADJUSTER GP Parts scheme

For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	250-9681	[1]	EDGE AS
1A.	220-9106	[1]	ADAPTER-TIP (K-100, 2-STRAP, LH)
1B.	220-9104	[3]	ADAPTER-TIP (K-100, 2-STRAP, CENTER)
1C.	220-9105	[1]	ADAPTER-TIP (K-100, 2-STRAP, RH)
1D.	8P-9770	[1]	PLATE
2.	270-1321	[1]	PLATE AS-BOX
3.	264-2703	[2]	PLATE-WEAR
4.	264-2693	[6]	PLATE-WEAR
5.	2C-9259	[2]	PLATE-IDENTIFICATION (CAT)
6.	250-6430 Y	[1]	ADJUSTER GP-BUCKET (DB-FAMILY)
	Y		SEPARATE ILLUSTRATION

#SEBP53890699

270-1285: BUCKET & ADJUSTER GP

BUCKET & ADJUSTER GP

270-1285 BUCKET & ADJUSTER GP -EXCAVATION, DB-FAMILY
S/N DTS1-UP
1600-MM (63-IN) WIDE X 1.99-CU M (2.6-CU YD) CAPACITY. K-100 ADAPTERS, QTY OF 5
AN ATTACHMENT

i02421872 SEBP5389

2701285 BUCKET & ADJUSTER GP Parts scheme

For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	250-9682	[1]	EDGE AS
1A.	220-9106	[1]	ADAPTER-TIP (K-100, 2-STRAP, LH)
1B.	220-9104	[3]	ADAPTER-TIP (K-100, 2-STRAP, CENTER)
1C.	220-9105	[1]	ADAPTER-TIP (K-100, 2-STRAP, RH)
1D.	8P-9770	[1]	PLATE
2.	270-1322	[1]	PLATE AS-BOX
3.	264-2703	[2]	PLATE-WEAR
4.	264-2694	[6]	PLATE-WEAR
5.	2C-9259	[2]	PLATE-IDENTIFICATION (CAT)
6.	250-6430 Y	[1]	ADJUSTER GP-BUCKET (DB-FAMILY)
	Y		SEPARATE ILLUSTRATION

Information:

IMPLEMENTS

STICK GP

Operation and Maintenance Manual

Boom, Stick and Bucket Operation
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit

Boom and Stick Linkage - Lubricate
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit

Boom and Stick Linkage - Lubricate
330D and 336D Excavators and 336D Mobile Hydraulic Power Units

Boom/Stick/Bucket Combinations
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit

Special Instruction

Procedure for the Repair of Cracks on Reach Sticks for Certain Excavators{6502}
Procedure for the Repair of Cracks on Reach Sticks for Certain Excavators{6502}

Installation Procedure For Mounting Blocks{0679, 6502}
Installation Procedure For Mounting Blocks{0679, 6502}

Rework Procedure to Repair Cracks from the Weld of the Support Plate for the Auxiliary Stop Valve of the Auxiliary Stick on Certain 330D and 336D Excavators{6502}
Rework Procedure to Repair Cracks from the Weld of the Support Plate for the Auxiliary Stop Valve of the Auxiliary Stick on Certain 330D and 336D Excavators{6502}

Specifications

Stick - 3.9 m (12.80 ft)
330D and 336D Excavators and 330D Material Handlers Machine System Specifications

Stick - 2.6 m (8.36 ft)
330D and 336D Excavators and 330D Material Handlers Machine System Specifications

Stick - 3.2 m (10.50 ft)
330D and 336D Excavators and 330D Material Handlers Machine System Specifications

Stick - 2.80 m (9.2 ft)
330D and 336D Excavators and 330D Material Handlers Machine System Specifications

Stick - 7.12 m (23.360 ft)
330D and 336D Excavators and 330D Material Handlers Machine System Specifications

Disassembly and Assembly

Stick Bearings and Seals - Remove
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems

Stick Bearings and Seals - Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems

Stick - Remove
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems

Stick - Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems

Service Magazine

Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}
Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}

An Improvement has been Made to Reduce the Amount of Radial Play of the Front Linkage Pin on Certain Excavators {6501, 6502, 6513}
2010/12/08

Improved Pin Assemblies and Bushings for the Boom, the Stick, and the Bucket Pin Joints Are Now Used on Certain Excavators and Mobile Hydraulic Power Units {5456, 5457, 5458, 6501, 6502, 6513}
2011/03/09

A New Procedure is Available to Improve the Durability of the Reach Sticks on Certain Excavators {6502}
2011/03/16

311D to 390D Excavator Front Linkage Bushing Diameter {6001, 6501, 6502, 6513, 6700}
2013/03/04

A New Stick and Bearing Assembly is Now Used on Certain 330D and 336D Excavators {6502}
2014/03/17

A New Steel Bushing for the Stick Nose is Now Available for Certain Excavators {6502}
2014/12/18

Caterpillar Parts SIS Catalog 336D L :

294-1507 STICK GP-HOE

290-9318 STICK GP-HOE

290-9287 STICK GP-HOE

290-9275 STICK GP-HOE

290-9263 STICK GP-HOE

290-9251 STICK GP-HOE

284-9712 STICK GP-HOE

250-6430 ADJUSTER GP-BUCKET

4I-4070 ADJUSTER GP-BUCKET

7Y-2219 ADJUSTER GP-BUCKET

251-3871 BUCKET & ADJUSTER GP

251-3875 BUCKET & ADJUSTER GP

270-1282 BUCKET & ADJUSTER GP

270-1283 BUCKET & ADJUSTER GP

270-1284 BUCKET & ADJUSTER GP

Truck sale:

Caterpillar 336D L
- Crawler Excavators
GREGORY POOLE EQUIPMENT CO.

74,767

Caterpillar 336DL, Crawler Excavators, Construction
- Crawler Excavators
WILLIAM ADAMS PTY. LTD.

31,260

Caterpillar 336DL, Crawler Excavators, Construction
- Crawler Excavators
SIME DARBY INDUSTRIAL SDN BHD

119,059

Caterpillar 336DL, Crawler Excavators, Construction
- Crawler Excavators
EMPIRE MACHINERY

57,256

Caterpillar 336DL, Crawler Excavators, Construction
- Crawler Excavators
WESTRAC PTY. LTD. (NSW)