OPERATOR STATION
CONTROL GP-ELECTROHYDRAULICCONTROL GP-HANDLE
CONTROL GP-JOYSTICK
MONITOR GP
CONTROL GP-STEERING
OPERATOR STATION
CONTROL GP-ELECTROHYDRAULIC
#SEBP54220810
319-8253: CONTROL GP-ELECTROHYDRAULIC
319-8253 CONTROL GP-ELECTROHYDRAULIC -JOYSTICK, 3-FUNCTION
S/N JAD1-UP
S/N JAD1-UP
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-8722 | [4] | NUT (RETAINER) | |
| 2. | 7K-1181 | [5] | STRAP-CABLE | |
| 3. | 112-6646 M | [4] | LOCKNUT (M6X1-THD) | |
| 4. | 140-5945 | [1] | FILM-IDENTIFICATION (HORN) | |
| 5. | 170-1821 | [1] | SWITCH AS-PUSH BUTTON (HORN) | |
| 6F-0253 | [1] | LOCKWASHER | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 172-3511 | [1] | NUT (5/8-24-THD) | ||
| 6. | 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 7. | 228-6089 | [1] | PLUG (ROCKER SWITCH) | |
| 8. | 245-6447 | [1] | CUSHION AS | |
| 9. | 247-4969 | [1] | PLATE | |
| 10. | 345-2046 | [1] | FILM-IDENTIFICATION (JOYSTICK CONTROL) | |
| 11. | 262-5238 | [1] | COVER | |
| 12. | 262-5239 | [1] | HOUSING AS | |
| 13. | 263-1995 | [1] | PLATE AS | |
| 14. | 265-6696 | [1] | SWITCH GP-ROCKER (THIRD FUNCTION SELECT) | |
| 256-7822 | [1] | SWITCH AS-ROCKER (24-VOLT) | ||
| 15. | 277-3281 Y | [1] | CONTROL GP-JOYSTICK (3-FUNCTION, W/FNR, DOWNSHIFT) | |
| 16. | 316-8507 | [1] | HARNESS AS-CONTROL | |
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 8T-8737 | [7] | PLUG-SEAL | ||
| 9X-3402 | [42] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [42] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 218-4935 | [1] | SUPPRESSOR-ARC | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 155-2258 | [2] | WEDGE-PLUG LOCK (12-PIN) | ||
| 155-2259 | [1] | WEDGE-PLUG LOCK (8-PIN) | ||
| 17. | 156-6175 | [1] | CLIP (LADDER) | |
| 18. | 198-4775 | [1] | WASHER-HARD (6.6X15X6-MM THK) | |
| 19. | 6R-7653 M | [2] | SCREW (M6X1X15-MM) | |
| 20. | 8R-3695 | [2] | GROMMET | |
| 21. | 8T-4138 M | [1] | BOLT (M6X1X20-MM) | |
| 22. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 23. | 8T-4970 M | [2] | BOLT (M6X1X14-MM) | |
| 24. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 25. | 9X-2044 M | [9] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 26. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 27. | 6V-3987 D | [2] | SEAL (0.062-M EACH) | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP54220811
319-8254: CONTROL GP-ELECTROHYDRAULIC
319-8254 CONTROL GP-ELECTROHYDRAULIC -JOYSTICK, 2-FUNCTION
S/N JAD1-UP
S/N JAD1-UP
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-8722 | [4] | NUT (RETAINER) | |
| 2. | 7K-1181 | [5] | STRAP-CABLE | |
| 3. | 112-6646 M | [4] | LOCKNUT (M6X1-THD) | |
| 4. | 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 5. | 228-6089 | [1] | PLUG (ROCKER SWITCH) | |
| 6. | 245-6447 | [1] | CUSHION AS | |
| 7. | 247-4969 | [1] | PLATE | |
| 8. | 345-2045 | [1] | FILM-INFORMATION (JOYSTICK) | |
| 9. | 262-5238 | [1] | COVER | |
| 10. | 262-5239 | [1] | HOUSING AS | |
| 11. | 263-1995 | [1] | PLATE AS | |
| 12. | 274-2371 Y | [1] | CONTROL GP-JOYSTICK | |
| 13. | 316-8507 | [1] | HARNESS AS-CONTROL | |
| 14. | 156-6175 | [1] | CLIP (LADDER) | |
| 15. | 198-4775 | [1] | WASHER-HARD (6.6X15X6-MM THK) | |
| 16. | 6R-7653 M | [2] | SCREW (M6X1X15-MM) | |
| 17. | 8R-3695 | [3] | GROMMET | |
| 18. | 8T-4138 M | [1] | BOLT (M6X1X20-MM) | |
| 19. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 20. | 8T-4970 M | [2] | BOLT (M6X1X14-MM) | |
| 21. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 22. | 9X-2044 M | [9] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 23. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 24. | 6V-3987 D | SEAL (0.07-M EACH) | ||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP54220812
332-9284: CONTROL GP-ELECTROHYDRAULIC
332-9284 CONTROL GP-ELECTROHYDRAULIC
S/N JAD1-UP
PART OF 243-1940 CONTROL GP-ELECTROHYDRAULIC
S/N JAD1-UP
PART OF 243-1940 CONTROL GP-ELECTROHYDRAULIC
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-8722 | [4] | NUT (RETAINER) | |
| 3. | 189-2077 | [1] | FILM-IDENTIFICATION (LIFT, FLOAT, LOWER) | |
| 4. | 189-2078 | [1] | FILM-IDENTIFICATION (DUMP, TILT BACK) | |
| 5. | 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 6. | 201-5563 | [1] | FILM-IDENTIFICATION (AUXILIARY HYDRAULIC) | |
| 7. | 245-6447 | [1] | CUSHION AS | |
| 9. | 247-4969 | [1] | PLATE | |
| 10. | 262-5237 | [1] | COVER | |
| 11. | 262-5239 | [1] | HOUSING AS | |
| 12. | 262-5240 | [1] | PLATE AS | |
| 13. | 265-6696 | [1] | SWITCH GP-ROCKER (THIRD FUNCTION SELECT) | |
| 256-7822 | [1] | SWITCH AS-ROCKER (24-VOLT)(THIRD FUNCTION SELECT) | ||
| 14. | 307-4671 Y | [3] | CONTROL GP-HANDLE (PILOT CONTROL) | |
| 15. | 6R-7653 M | [2] | SCREW (M6X1X15-MM) | |
| 16. | 8R-3695 | [2] | GROMMET | |
| 17. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 18. | 8T-4970 M | [2] | BOLT (M6X1X14-MM) | |
| 19. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 20. | 9X-2044 M | [21] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 21. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 22. | 6V-3987 D | SEAL (0.1-M EACH) | ||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP54220813
307-4671: CONTROL GP-HANDLE
307-4671 CONTROL GP-HANDLE -BUCKET
S/N JAD1-UP
PART OF 243-1089, 332-9284 CONTROL GP-ELECTROHYDRAULIC
FIELD REPLACEMENT ORDER @@@@@361-6015@@@@@
S/N JAD1-UP
PART OF 243-1089, 332-9284 CONTROL GP-ELECTROHYDRAULIC
FIELD REPLACEMENT ORDER @@@@@361-6015@@@@@
For full view, you need register
#SEBP54220814
361-6015: CONTROL GP-HANDLE
361-6015 CONTROL GP-HANDLE
S/N JAD1-UP
SINGLE AXIS LEVER
FIELD REPLACEMENT FOR @@@@@307-4671@@@@@
S/N JAD1-UP
SINGLE AXIS LEVER
FIELD REPLACEMENT FOR @@@@@307-4671@@@@@
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS#SEBP54220815
274-2371: CONTROL GP-JOYSTICK
274-2371 CONTROL GP-JOYSTICK -2-FUNCTION, WITH FNR, DOWNSHIFT
S/N JAD1-UP
PART OF 319-8254 CONTROL GP-ELECTROHYDRAULIC
S/N JAD1-UP
PART OF 319-8254 CONTROL GP-ELECTROHYDRAULIC
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 277-7570 | [1] | BASE AS-JOYSTICK | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 280-0440 M | [4] | STUD-MOUNTING (M6X1-THD) | ||
| 2. | 279-6641 | [1] | BOOT | |
| 3. | 277-3279 | [1] | CONTROL GP-HANDLE (LIFT, TILT, FNR, DOWNSHIFT) | |
| 8T-8737 | [4] | PLUG-SEAL | ||
| 144-0331 | [1] | CAP-PUSH BUTTON (YELLOW) | ||
| 174-3091 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 4. | 213-7489 M | [3] | SCREW (M4X0.7X25-MM) | |
| 5. | 178-9983 M | [3] | LOCKNUT (M4X0.7-THD) | |
| 6. | 174-3091 | [1] | KIT-RECEPTACLE (12-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7. | 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8. | 8T-8729 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 9. | 8T-8737 | [4] | PLUG-SEAL | |
| M | METRIC PART | |||
#SEBP54220816
277-3281: CONTROL GP-JOYSTICK
277-3281 CONTROL GP-JOYSTICK -3-FUNCTION, WITH FNR, DOWNSHIFT
S/N JAD1-UP
PART OF 319-8253 CONTROL GP-ELECTROHYDRAULIC
S/N JAD1-UP
PART OF 319-8253 CONTROL GP-ELECTROHYDRAULIC
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 277-7570 | [1] | BASE AS-JOYSTICK | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 280-0440 M | [4] | STUD-MOUNTING (M6X1-THD) | ||
| 2. | 279-6641 | [1] | BOOT | |
| 3. | 277-3282 | [1] | CONTROL GP-HANDLE (LIFT, TILT, AUX, FNR, DNSFT) | |
| 8T-8737 | [2] | PLUG-SEAL | ||
| 174-3091 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [10] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 4. | 213-7489 M | [3] | SCREW (M4X0.7X25-MM) | |
| 5. | 178-9983 M | [3] | LOCKNUT (M4X0.7-THD) | |
| 6. | 174-3091 | [1] | KIT-RECEPTACLE (12-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7. | 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8. | 186-3735 | [10] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 9. | 8T-8737 | [2] | PLUG-SEAL | |
| M | METRIC PART | |||
#SEBP54220817
103-5526: CONTROL GP-MONITOR
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS#SEBP54220818
141-8802: CONTROL GP-STEERING
141-8802 CONTROL GP-STEERING -HMU STEERING
S/N JAD1-UP
PART OF 243-1080, 373-7788 CAB AR-ENCLOSED ROPS
S/N JAD1-UP
PART OF 243-1080, 373-7788 CAB AR-ENCLOSED ROPS
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2T-3360 | [1] | BUTTON AS-HORN | |
| 2. | 8R-2918 | [1] | KNOB AS | |
| 3. | 105-3477 M | [1] | BOLT-SOCKET HEAD (M10X1.5X45-MM) | |
| 4. | 123-6713 | [1] | WEDGE | |
| 5. | 124-0065 | [1] | BLOCK | |
| 6. | 141-8808 | [1] | COVER AS (RH) | |
| 7. | 141-8811 | [1] | COVER AS (LH) | |
| 8. | 144-0896 | [1] | BRACKET AS | |
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| 9. | 146-3793 | [1] | STEERING WHEEL | |
| 10. | 297-4926 Y | [1] | STEERING COLUMN GP-ADJUSTABLE | |
| 11. | 255-8545 | [2] | WASHER-RUBBER (21.5X55X2-MM THK) | |
| 12. | 291-5392 | [1] | BOOT (HMU) | |
| 13. | 099-7241 | [1] | WASHER-HARD (19X34X3-MM THK) | |
| 14. | 6V-5683 M | [4] | BOLT (M6X1X16-MM) | |
| 15. | 8T-1159 M | [4] | BOLT-SOCKET HEAD (M10X1.5X25-MM) | |
| 16. | 8T-4121 | [10] | WASHER-HARD (11X21X2.5-MM THK) | |
| 17. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 18. | 8T-4185 M | [2] | BOLT (M10X1.5X50-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP54220819
219-7619: CONTROL GP-STEERING
219-7619 CONTROL GP-STEERING -COMMAND CONTROL STEERING
S/N JAD1-UP
PART OF 243-1081 CAB AR-ENCLOSED ROPS
S/N JAD1-UP
PART OF 243-1081 CAB AR-ENCLOSED ROPS
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 105-3477 M | [1] | BOLT-SOCKET HEAD (M10X1.5X45-MM) | |
| 3. | 112-2014 | [1] | CLAMP | |
| 4. | 112-9716 | [1] | LEVER | |
| 5. | 114-5309 | [1] | COVER AS (RH) | |
| 6. | 114-5312 | [1] | COVER AS (LH) | |
| 7. | 118-8078 | [2] | CLIP | |
| 8. | 123-6713 | [1] | WEDGE | |
| 9. | 124-0065 | [1] | BLOCK | |
| 10. | 155-6526 | [1] | SLEEVE | |
| 11. | 297-4928 Y | [1] | STEERING COLUMN GP | |
| 12. | 1B-8705 | [1] | KEY-WOODRUFF | |
| 13. | 218-0654 Y | [1] | STEERING WHEEL GP (COMMAND CONTROL STEERING) | |
| 14. | 4D-9517 | [1] | CLIP | |
| 15. | 6V-5683 M | [4] | BOLT (M6X1X16-MM) | |
| 16. | 7X-2619 M | [3] | BOLT (M6X1X10-MM) | |
| 17. | 8T-1159 M | [4] | BOLT-SOCKET HEAD (M10X1.5X25-MM) | |
| 18. | 8T-4121 | [10] | WASHER-HARD (11X21X2.5-MM THK) | |
| 19. | 8T-4185 M | [2] | BOLT (M10X1.5X50-MM) | |
| 20. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 21. | 8T-4195 M | [5] | BOLT (M10X1.5X30-MM) | |
| 22. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 23. | 6V-5219 M | [1] | BOLT (M8X1.25X40-MM) | |
| 24. | 8T-7963 M | [1] | LOCKNUT (M8X1.25-THD) | |
| 25. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 26. | 255-8545 | [2] | WASHER-RUBBER (21.5X55X2-MM THK) | |
| 27. | 297-4929 | [1] | ADAPTER AS | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
