FUEL SYSTEM
TANK GP-FUELELECTRICAL AND STARTING SYSTEM
ALARM GPALTERNATOR GP-CHARGING
BATTERY GP
FUEL SYSTEM
TANK GP-FUEL
#SEBP54230170
240-5150: TANK GP-FUEL
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1H-8306 | [1] | SCREW-PURGE (1/2-20X1.625-IN) | |
| 2. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 3. | 180-3730 | [1] | STRAINER-FUEL (FILLER NECK SCREEN) | |
| 4. | 187-7331 | [8] | MOUNT-RUBBER | |
| 5. | 188-8844 | [1] | VALVE-BREAKER RELIEF | |
| 6. | 304-0472 | [1] | TANK AS-FUEL | |
| 7. | 322-7452 | [1] | SENDER AS-FUEL LEVEL | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8. | 304-0473 | [1] | TUBE AS | |
| 9. | 338-0912 | [1] | CAP AS-FUEL (DEBRIS BOOT) | |
| 10. | 3D-2824 | [1] | SEAL-O-RING | |
| 11. | 7M-8485 | [1] | SEAL-O-RING | |
| 12. | 7X-0607 | [4] | WASHER-HARD (20X55X8-MM THK) | |
| 13. | 7X-2554 M | [4] | BOLT (M16X2X70-MM) | |
| 14. | 8C-3210 M | [5] | BOLT (M6X1X16-MM) | |
| 15. | 8C-5172 | [1] | SEAL-RECTANGULAR | |
| 16. | 8T-4136 M | [3] | BOLT (M10X1.5X25-MM) | |
| 17. | 9S-9334 | [1] | PLUG | |
| 18. | 9X-8256 | [5] | WASHER (6.6X12X2-MM THK) | |
| 19. | 9X-8257 | [4] | WASHER (17.5X30X3.5-MM THK) | |
| 20. | 8C-8422 | [1] | SEALANT | |
| 21. | 304-0475 I | [1] | HOSE AS | |
| 22. | 7K-1181 | [1] | STRAP-CABLE | |
| 23. | 148-8347 | [2] | ELBOW AS | |
| (EACH INCLUDES) | ||||
| 3D-2824 | [1] | SEAL-O-RING | ||
| 6V-9007 | [1] | ELBOW | ||
| 6V-9746 | [1] | SEAL-O-RING | ||
| 24. | 6V-1889 | [2] | CLIP (LOOP) | |
| 25. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 26. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP54230171
240-5150: TANK GP-FUEL
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1H-8306 | [1] | SCREW-PURGE (1/2-20X1.625-IN) | |
| 2. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 3. | 180-3730 | [1] | STRAINER-FUEL (FILLER NECK SCREEN) | |
| 4. | 187-7331 | [8] | MOUNT-RUBBER | |
| 5. | 7C-4354 C | [1] | CLIP | |
| 6. | 304-0472 | [1] | TANK AS-FUEL | |
| 7. | 322-7452 | [1] | SENDER AS-FUEL LEVEL | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8. | 304-0473 | [1] | TUBE AS | |
| 9. | 338-0912 | [1] | CAP AS-FUEL (DEBRIS BOOT) | |
| 10. | 3D-2824 | [1] | SEAL-O-RING | |
| 11. | 7M-8485 | [1] | SEAL-O-RING | |
| 12. | 7X-0607 | [4] | WASHER-HARD (20X55X8-MM THK) | |
| 13. | 7X-2554 M | [4] | BOLT (M16X2X70-MM) | |
| 14. | 8C-3210 M | [5] | BOLT (M6X1X16-MM) | |
| 15. | 8C-5172 | [1] | SEAL-RECTANGULAR | |
| 16. | 8T-4136 M | [3] | BOLT (M10X1.5X25-MM) | |
| 17. | 9S-9334 | [1] | PLUG | |
| 18. | 9X-8256 | [5] | WASHER (6.6X12X2-MM THK) | |
| 19. | 9X-8257 | [4] | WASHER (17.5X30X3.5-MM THK) | |
| 20. | 1U-8846 B | [1] | SEALANT-GASKET | |
| 21. | 136-1955 CE | HOSE (50-CM) | ||
| 22. | 7K-1181 | [1] | STRAP-CABLE | |
| 23. | 153-9910 C | [2] | ELBOW AS | |
| (EACH INCLUDES) | ||||
| 3D-2824 | [1] | SEAL-O-RING | ||
| 032-8487 | [1] | ELBOW | ||
| 24. | 6V-1889 C | [1] | CLIP (LOOP) | |
| 25. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 26. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 27. | 124-6258 C | [2] | CLAMP-HOSE | |
| 28. | 9S-8008 C | [1] | PLUG (1-1/16-12-THD) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP54230172
240-5150: TANK GP-FUEL
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS#SEBP54230173
365-4341: TANK GP-FUEL
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1H-8306 | [1] | SCREW-PURGE (1/2-20X1.625-IN) | |
| 2. | 7K-1181 | [1] | STRAP-CABLE | |
| 3. | 153-9910 | [2] | ELBOW AS | |
| (EACH INCLUDES) | ||||
| 6V-5063 | [1] | SEAL-O-RING | ||
| 032-8487 | [1] | ELBOW | ||
| 4. | 180-3730 | [1] | STRAINER-FUEL (FILLER NECK SCREEN) | |
| 5. | 304-0473 | [1] | TUBE AS | |
| 6. | 322-7452 | [1] | SENDER AS-FUEL LEVEL | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 7. | 338-0912 | [1] | CAP AS-FUEL (DEBRIS BOOT) | |
| 284-9039 | [1] | CAP-FUEL (VENTED) | ||
| 355-8947 | [1] | BOOT-FUEL CAP | ||
| 8. | 362-1168 | [1] | TANK AS | |
| 9. | 124-6258 | [2] | CLAMP-HOSE | |
| 10. | 3D-2824 | [2] | SEAL-O-RING | |
| 11. | 7M-8485 | [1] | SEAL-O-RING | |
| 12. | 8C-3210 M | [5] | BOLT (M6X1X16-MM) | |
| 13. | 8C-5172 | [1] | SEAL-RECTANGULAR | |
| 14. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 15. | 8T-4136 M | [3] | BOLT (M10X1.5X25-MM) | |
| 16. | 9S-8008 | [2] | PLUG (1-1/16-12-THD) | |
| 17. | 9S-9334 | [1] | PLUG | |
| 18. | 9X-8256 | [5] | WASHER (6.6X12X2-MM THK) | |
| 19. | 136-1955 E | HOSE (50-CM) | ||
| 20. | 1U-8846 B | SEALANT-GASKET | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP54230174
132-1829: ALARM GP
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS#SEBP54230175
3E-6328: ALARM GP
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS#SEBP54230176
177-9953: ALTERNATOR GP-CHARGING
177-9953 ALTERNATOR GP-CHARGING
S/N MAL1-UP
24-VOLT, 80-AMPERE
PART OF 237-4847 ALTERNATOR GP-CHARGING
S/N MAL1-UP
24-VOLT, 80-AMPERE
PART OF 237-4847 ALTERNATOR GP-CHARGING
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 185-2653 | [1] | FRAME | |
| 2. | 5S-7349 | [1] | BOLT (1/4-20X0.5-IN) | |
| 3. | 185-2639 | [1] | FAN AS (ALTERNATOR) | |
| 4. | 1H-3244 | [1] | LOCKWASHER | |
| 5. | 185-2645 | [1] | FRAME | |
| 6. | 2K-4821 | [1] | LOCKNUT (5/8-18-THD) | |
| 7. | 5P-8247 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 8. | 228-9657 | [1] | COVER AS | |
| 9. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 10. | 185-2647 | [1] | GROMMET | |
| 11. | 9L-6770 | [1] | CAP-DUST | |
| 12. | 423-2775 | [1] | STATOR AS (24-VOLT, 95-AMPERE)(ALTERNATOR) | |
| 13. | 185-2638 | [2] | COLLAR | |
| 14. | 185-2654 | [1] | PLATE | |
| 15. | 185-2650 | [1] | ROTOR AS (ALTERNATOR) | |
| 16. | 185-2644 | [1] | COIL AS | |
| 17. | 185-2648 | [1] | REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR) | |
| 18. | 6V-8189 J | [1] | NUT (5/16-18-THD) | |
| 19. | 8T-4224 J | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 20. | 3F-9556 J | [1] | LOCKWASHER | |
| AVAILABLE REPAIR KIT(S): | ||||
| 199-7891 J | [1] | KIT-TERMINAL (ALTERNATOR AIR) | ||
| (INCLUDES INSULATORS, WASHERS, NUT & STEP NUT) | ||||
| 185-2655 | [1] | KIT-BEARING (ALTERNATOR) | ||
| (INCLUDES 3 BEARINGS) | ||||
| 199-8436 | [1] | KIT-TERMINAL (ALTERNATOR AIR) | ||
| (INCLUDES HOLDER AS, PLATE, INSULATOR, PIN, BOLT, GROMMET & NUT) | ||||
| 185-2658 | [1] | KIT-HARDWARE (ALTERNATOR AIR) | ||
| (INCLUDES BOLTS) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
#SEBP54230177
237-4847: ALTERNATOR GP-CHARGING
237-4847 ALTERNATOR GP-CHARGING
S/N MAL1-UP
PART OF 237-3995 INSTALLATION AR-ENGINE
Type 1
S/N MAL1-UP
PART OF 237-3995 INSTALLATION AR-ENGINE
Type 1
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-8329 | [1] | SPACER (10.5X16.545X34-MM THK) | |
| 2. | 129-5096 | [1] | PULLEY-ALTERNATOR (8-GROOVE) | |
| 3. | 172-4211 | [1] | SPACER (10.5X22X50.8-MM THK) | |
| 4. | 173-1498 | [1] | PULLEY AS-IDLER (8-GROOVE) | |
| 151-2900 M | [1] | BOLT (M10X1.5X54.25-MM) | ||
| 166-6358 | [1] | COVER-DUST | ||
| 5. | 177-9953 Y | [1] | ALTERNATOR GP-CHARGING (24-VOLT, 80-AMPERE) | |
| 6. | 238-1074 | [1] | BRACKET | |
| 7. | 337-3023 | [1] | BELT-SERPENTINE | |
| 8. | 262-4561 | [1] | SHIELD AS-HEAT | |
| 9. | 5P-2566 | [1] | BOLT (1/2-13X1.5-IN) | |
| 10. | 6V-8188 | [1] | NUT (1/2-13-THD) | |
| 11. | 7X-0338 | [1] | BOLT (1/2-13X6-IN) | |
| 12. | 8T-3647 M | [2] | BOLT (M8X1.25X80-MM) | |
| 13. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 14. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 15. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 16. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 17. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 18. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 19. | 8T-7934 | [2] | WASHER-HARD (11X21X5-MM THK) | |
| 20. | 9S-2396 | [1] | BUSHING-TERMINAL | |
| 21. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP54230178
237-4847: ALTERNATOR GP-CHARGING
237-4847 ALTERNATOR GP-CHARGING
S/N MAL1-UP
PART OF 237-3995 INSTALLATION AR-ENGINE
Type 2
S/N MAL1-UP
PART OF 237-3995 INSTALLATION AR-ENGINE
Type 2
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-8329 | [1] | SPACER (10.5X16.545X34-MM THK) | |
| 2. | 129-5096 | [1] | PULLEY-ALTERNATOR (8-GROOVE) | |
| 3. | 172-4211 | [1] | SPACER (10.5X22X50.8-MM THK) | |
| 5. | 177-9953 Y | [1] | ALTERNATOR GP-CHARGING (24-VOLT, 80-AMPERE) | |
| 6. | 238-1074 | [1] | BRACKET | |
| 8. | 262-4561 | [1] | SHIELD AS-HEAT | |
| 9. | 5P-2566 | [1] | BOLT (1/2-13X1.5-IN) | |
| 10. | 6V-8188 | [1] | NUT (1/2-13-THD) | |
| 11. | 7X-0338 | [1] | BOLT (1/2-13X6-IN) | |
| 12. | 8T-3647 M | [2] | BOLT (M8X1.25X80-MM) | |
| 13. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 14. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 15. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 16. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 17. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 18. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 19. | 8T-7934 | [2] | WASHER-HARD (11X21X5-MM THK) | |
| 20. | 9S-2396 | [1] | BUSHING-TERMINAL | |
| 21. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP54230179
324-0679: BATTERY & WIRING GP
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-8320 | [1] | PLATE-INSTRUCTION (BATTERY) | |
| 2. | 3S-2093 | [8] | STRAP-CABLE | |
| 3. | 8V-0622 | [1] | CABLE AS-BATTERY | |
| 8C-5917 | [1] | TERMINAL AS-BATTERY (POSITIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 1M-6119 | [2] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [2] | NUT (5/16-18-THD) | ||
| 5P-0761 E | CABLE (00-GA, RED)(16-CM) | |||
| 8T-9757 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 9G-0003 | [1] | COVER AS-TERMINAL (BLACK) | ||
| 8L-8413 | [1] | STRAP-CABLE (WHITE) | ||
| 9G-0004 | [1] | COVER AS-TERMINAL (RED) | ||
| 8L-8413 | [1] | STRAP-CABLE (WHITE) | ||
| 4. | 124-3019 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 5. | 134-2636 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 6. | 153-5710 | [2] | BATTERY GP (12-VOLT, MAINTENANCE FREE, WET) | |
| 7. | 153-6281 | [1] | HOLD-DOWN-BATTERY | |
| 8. | 9R-5383 | [1] | BOSS | |
| 9. | 290-6516 | [1] | RECEPTACLE AS | |
| 351-9309 E | TUBE-HEAT SHRINK (32-MM DIA)(5-CM) | |||
| 9X-9825 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 159-8049 E | CABLE (00-GA, RED)(55-CM) | |||
| 159-8050 E | CABLE (00-GA, BLACK)(24-CM) | |||
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 10. | 108-2949 M | [2] | STUD (M10X1.5X270-MM) | |
| 11. | 315-5390 M | [2] | NUT (M40X1.5-THD) | |
| 12. | 322-3305 Y | [1] | BLOCK GP-JUNCTION (BATTERY) | |
| 13. | 324-0680 | [1] | CABLE AS | |
| 9G-0005 | [1] | COVER AS-TERMINAL (BLACK) | ||
| 8L-8413 | [1] | STRAP-CABLE (WHITE) | ||
| 8C-5918 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 159-8050 E | CABLE (00-GA, BLACK)(44-CM) | |||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 315-0180 | [1] | TERMINAL-RING (00-GA, 3/8-IN SCREW) | ||
| 14. | 324-0681 | [1] | CABLE AS | |
| 159-8050 E | CABLE (00-GA, BLACK)(47-CM) | |||
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 315-0180 | [1] | TERMINAL-RING (00-GA, 3/8-IN SCREW) | ||
| 15. | 324-0682 | [1] | CABLE AS | |
| 8C-5917 | TERMINAL AS-BATTERY (POSITIVE) | |||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 9X-5632 | [1] | COVER-TERMINAL (RED, RH POS) | ||
| 159-8049 E | CABLE (00-GA, RED)(58-CM) | |||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 16. | 324-0683 | [1] | CABLE AS | |
| 8N-0869 | [2] | COVER-TERMINAL (RED) | ||
| 159-8049 E | CABLE (00-GA, RED)(171-CM) | |||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 17. | 324-0684 | [1] | CABLE AS | |
| 159-8050 E | CABLE (00-GA, BLACK)(67-CM) | |||
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 18. | 325-9438 | [2] | GROMMET AS | |
| 19. | 132-7551 | [1] | SPACER (11X19X6-MM THK) | |
| 20. | 2V-1771 | [11] | GROMMET | |
| 21. | 2W-7940 | [1] | BRACKET | |
| 22. | 5C-7261 M | [4] | NUT (M8X1.25-THD) | |
| 23. | 1S-0994 | [11] | CLIP (LOOP) | |
| 24. | 7N-0718 Y | [1] | SWITCH GP-DISCONNECT (BATTERY) | |
| 25. | 7X-7729 | [2] | WASHER (11X25X3-MM THK) | |
| 26. | 8S-2634 | [1] | COVER AS | |
| 27. | 8T-0389 M | [2] | LOCKNUT (M10X1.5-THD) | |
| 28. | 8T-4121 | [11] | WASHER-HARD (11X21X2.5-MM THK) | |
| 29. | 8T-4133 M | [3] | NUT (M10X1.5-THD) | |
| 30. | 8T-4137 M | [8] | BOLT (M10X1.5X20-MM) | |
| 31. | 8T-4185 M | [1] | BOLT (M10X1.5X50-MM) | |
| 32. | 8T-4192 M | [3] | BOLT (M12X1.75X25-MM) | |
| 33. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 34. | 8T-4223 | [5] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 35. | 8T-4224 | [8] | WASHER-HARD (8.8X16X2-MM THK) | |
| 36. | 8T-4244 M | [2] | NUT (M12X1.75-THD) | |
| 37. | 8T-7547 M | [4] | BOLT (M8X1.25X30-MM) | |
| 38. | 4H-1225 | [4] | WASHER (11X22X6-MM THK) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
