AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

449-3900 SENSOR GP-TEMPERATURE -THERMOCOUPLE S/N SCK1-UP PART OF 120-4498 THERMOCOUPLE GP FIELD REPLACEMENT ORDER 1-449-3985 SENSOR GP-TEMPERATURE AN ATTACHMENT 3516C


ELECTRICAL AND STARTING SYSTEM
SENSOR GP
STARTING MOTOR GP

GENERATOR SET 3516C GENERATOR SET SCK
 3516C Generator Set SCK00001-UP SEBP5436 3516C SCK   (2011)

ELECTRICAL AND STARTING SYSTEM

SENSOR GP
SENSOR GP-TEMPERATURE
363-2921 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
363-2922 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
449-3900 SENSOR GP-TEMPERATURE
 

#SEBP54360980
 

449-3900: SENSOR GP-TEMPERATURE

449-3900 SENSOR GP-TEMPERATURE -THERMOCOUPLE
S/N SCK1-UP
PART OF 120-4498 THERMOCOUPLE GP
FIELD REPLACEMENT ORDER 1-449-3985 SENSOR GP-TEMPERATURE
AN ATTACHMENT
i05702369 SEBP5436
4493900 SENSOR GP-TEMPERATURE Parts scheme
  For full view, you need register

Parts for your 3516C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 449-3985 [1] SENSOR GP-TEMPERATURE (THERMOCOUPLE)  
 

#SEBP54360981
 

375-2608: STARTING MOTOR GP-AIR

375-2608 STARTING MOTOR GP-AIR -MOUNTED, LH
S/N SCK1-UP
AN ATTACHMENT
i04557047 SEBP5436
3752608 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your 3516C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-7869 [1] GASKET  
2. 4N-3411 J [1] VALVE GP-RELAY (AIR STARTING MOTOR)  
3. 6F-5985 BI [1] HOSE AS  
5. 7C-2946 [1] BRACKET  
6. 7N-2539 I [2] HOSE AS  
7. 8N-8446 [1] ELBOW  
8. 9S-9238 [2] SPACER (13.49X23.88X16.13-MM THK)  
9. 107-8769 [1] SILENCER-AIR STARTING  
10. 119-6284 Y [1] LUBRICATOR GP-AIR MOTOR  
11. 7C-3372 Y [1] STARTING MOTOR GP-AIR  
12. 143-5177 [1] NIPPLE-PIPE  
13. 375-5814 Y [1] VALVE AS-SOLENOID (AIR START)  
14. 030-7961 [2] ELBOW  
15. 141-8596 [4] BOLT-SOCKET HEAD (1/2-13X1.25-IN)  
16. 0S-1566 [3] BOLT (5/8-11X1.5-IN)  
17. 1D-4566 [2] BOLT (1/2-13X3.5-IN)  
18. 4S-6399 [1] CONNECTOR  
19. 5B-7643 [1] NIPPLE-PIPE  
20. 5B-7666 [2] ELBOW  
21. 5H-7598 [1] NIPPLE-PIPE  
22. 5L-2534 [1] U-BOLT  
23. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
24. 6K-1972 [3] ELBOW-FLARED  
25. 7J-8611 [1] ELBOW-PIPE  
26. 7K-9197 [1] ELBOW  
27. 8N-8451 [1] GASKET  
28. 8N-8452 [1] GASKET  
29. 8S-9089 [2] BOLT (1/2-13X4.5-IN)  
30. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
31. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
32. 9X-6458 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
33. 5B-7666 B [1] ELBOW  
   
    AVAILABLE REPAIR KIT(S):
  7C-5105 J [1] KIT-VALVE SEAL (AIR STARTING)  
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   KIT MARKED J SERVICES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP54360982
 

7C-3372: STARTING MOTOR GP-AIR

7C-3372 STARTING MOTOR GP-AIR
S/N SCK1-UP
PART OF 375-2608 STARTING MOTOR GP-AIR
AN ATTACHMENT
i00091625 SEBP5436
7C3372 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your 3516C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 096-4833 M [1] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
2. 5N-8363 [1] COVER AS  
2A. 4D-3118 [3] PLUG-PIPE  
3. 039-4317 [2] WASHER-SPRING  
4. 5N-8383 [1] CYLINDER  
5. 6V-3916 [1] BALL BEARING  
6. 5N-8375 [1] CUP-SPRING  
7. 5N-8381 [1] SPRING-CLUTCH  
8. 2W-6081 [1] GEAR AS-DRIVE (37-TEETH)  
9. 5N-9574 [1] JAW AS-CLUTCH  
10. 5N-8387 [1] CASE-GEAR  
11. 5N-8424 [1] BULKHEAD  
12. 6V-3940 M [8] BOLT (M8X1.25X25-MM)  
13. 3J-7719 [1] RING-RETAINING (INNER)  
14. 7F-8671 [1] BALL BEARING  
15. 5N-8428 [1] WASHER-GEAR (10.1X34X15.5-MM THK)  
16. 5N-8427 M [4] BOLT-MOTOR (M10X1.5X180-MM)  
17. 7X-0796 [5] LOCKWASHER (10.2X18.4X2.5-MM THK)  
18. 5N-8403 M [1] SCREW-PINION (M12X1.25X70-MM)  
19. 2W-6078 [1] PINION-DRIVE (12-TEETH)  
20. 5N-8380 [1] SPRING-PINION  
21. 2W-6082 [1] KIT-DRIVE (AIR STARTING MOTOR)  
    (INCLUDES O-RING, HOUSING, BEARING, SEAL & VENT)
22. 8B-7624 [1] BALL BEARING  
23. 5N-8379 [1] SEAT-SPRING  
24. 5N-8372 [1] SPRING-RETURN  
25. 5N-8384 [1] SHAFT-DRIVE  
26. 6V-3938 M [1] BOLT (M10X1.5X20-MM)  
27. 5P-9514 [1] BALL BEARING  
28. 5N-8377 [1] BEARING-DRIVE SHAFT  
29. 5N-8373 [1] PISTON  
30. 6V-3939 M [1] BOLT (M12X1.75X60-MM)  
31. 5N-8368 [1] PINION-ROTOR (17-TEETH)  
32. 6V-1394 [1] BALL BEARING  
33. 5N-8365 [1] PLATE-FRONT END  
34. 111-4399 [1] HOUSING-MOTOR  
35. 5N-8388 [1] ROTOR  
36. 5N-8367 [1] PLATE-REAR END  
37. 5N-8378 [1] NUT-ROTOR CLAMP (M5X0.8-THD)  
38. 1L-8497 [1] RING-SNAP  
39. 6J-7855 [1] RING-RETAINING  
40. 6V-3935 [1] RING-RETAINING  
41. 3B-4505 [8] LOCKWASHER  
42. 5N-8425 [1] WASHER (12.2X41.5X4.5-MM THK)  
43. 6V-3971 [1] RING-RETAINING (OUTER)  
44. 5N-8374 [1] SLEEVE-SPRING  
   
    AVAILABLE REPAIR KIT(S):
  5N-8390 [1] KIT-SEAL & VANE (AIR STARTING MOTOR)  
    (INCLUDES PINS, O-RINGS, SEALS, VANE, RETAINER & PISTON BUMPERS)
  M   METRIC PART
 

#SEBP54360983
 

335-4149: STARTING MOTOR GP-ELECTRIC

335-4149 STARTING MOTOR GP-ELECTRIC -LH
S/N SCK1-UP
24-VOLT
Type 1
AN ATTACHMENT
i04536580 SEBP5436
3354149 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3516C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-0927 Y [2] STARTING MOTOR GP-ELECTRIC  
2. 9Y-6089 [2] GASKET  
3. 7J-8902 [6] BOLT-12 POINT HEAD (5/8-11X1.5-IN)  
4. 7L-5887 [1] CABLE AS (0000-GA)  
  3L-7634 [2] TERMINAL-RING (0000-GA, 1/2-IN SCREW)  
5. 3L-7604 [4] SHIELD-TERMINAL  
6. 4L-6155 [1] CABLE AS (0000-GA)  
  3L-7634 [2] TERMINAL-RING (0000-GA, 1/2-IN SCREW)  
7. 3L-6836 [1] SPACER (0.5X0.75X0.56-IN THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP54360984
 

335-4149: STARTING MOTOR GP-ELECTRIC

335-4149 STARTING MOTOR GP-ELECTRIC -LH
S/N SCK1-UP
24-VOLT
Type 2
AN ATTACHMENT
i05069217 SEBP5436
3354149 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3516C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 352-9766 CY [2] STARTING MOTOR GP-ELECTRIC (24-VOLT)  
2. 9Y-6089 [2] GASKET  
3. 7J-8902 [6] BOLT-12 POINT HEAD (5/8-11X1.5-IN)  
4. 7L-5887 [1] CABLE AS (0000-GA)  
  3L-7634 [2] TERMINAL-RING (0000-GA, 1/2-IN SCREW)  
5. 294-2318 C [2] COVER-TERMINAL (RED)  
6. 4L-6155 [1] CABLE AS (0000-GA)  
  3L-7634 [2] TERMINAL-RING (0000-GA, 1/2-IN SCREW)  
7. 3L-6836 [1] SPACER (0.5X0.75X0.56-IN THK)  
8. 294-2319 C [2] COVER-TERMINAL (BLACK)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP54360985
 

338-3454: STARTING MOTOR GP-ELECTRIC

338-3454 STARTING MOTOR GP-ELECTRIC
S/N SCK1-UP
24-VOLT
FIELD REPLACEMENT FOR @@@@@352-9766@@@@@, @@@@@6V-0927@@@@@
i03784531 SEBP5436
3383454 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3516C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
  3T-3423 [1] CUP  
  3T-3424 [1] PLUG-FELT  
  9G-4101 [1] BUSHING-END  
8. 3T-9525 Y [1] PLATE AS-BRUSH (STARTING MOTOR)  
9. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
10. 3T-3422 [1] WIRE AS  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 125-6535 [1] COVER-STARTING MOTOR  
14. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
15. 3L-3380 [1] BUSHING-TERMINAL  
16. 8C-3089 [1] SEAL-O-RING  
17. 4M-1853 [1] LEVER AS-SHIFT  
18. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
19. 7L-2894 [4] GASKET  
20. 4M-1831 [4] PLUG-LEVER HOUSING  
21. 4M-1854 [1] SHAFT-LEVER  
22. 1H-1023 [1] SEAL-O-RING  
23. 2D-6392 [1] SEAL-O-RING  
24. 494-6475 [1] HOUSING AS-DRIVE  
25. 6N-3826 [1] DRIVE AS-MOTOR  
26. 2H-3429 [1] RING-RETAINING  
27. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
28. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
29. 6N-3279 [1] INSULATOR  
30. 0S-1597 [13] BOLT (1/4-28X1-IN)  
31. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
32. 1H-2629 [3] STRIP-INSULATION  
33. 7M-0324 [1] COIL AS-FIELD  
34. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
35. 7F-3488 [6] SHOE-POLE  
36. 7M-8651 [1] ARMATURE AS  
37. 7M-0325 [1] INSULATOR  
38. 3T-9524 [6] BRUSH AS  
39. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & WASHERS)
40. 338-3453 [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
40A. 3R-8801 [1] CLAMP  
42. 8F-1434 [2] LOCKWASHER  
43. 6V-8188 [6] NUT (1/2-13-THD)  
44. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
45. 4B-2049 [6] NUT (10-32-THD)  
46. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
47. 3T-9494 [6] SPRING  
48. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
49. 9G-4101 [1] BUSHING-END  
50. 3T-3424 [3] PLUG-FELT  
51. 3T-3423 [3] CUP  
52. 1M-9968 [1] BUSHING  
53. 2F-6678 [1] SEAL-LIP TYPE  
54. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
55. 4M-1896 [1] BUSHING-TERMINAL  
56. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP54360986
 

352-9766: STARTING MOTOR GP-ELECTRIC

352-9766 STARTING MOTOR GP-ELECTRIC
S/N SCK1-UP
24-VOLT
PART OF 335-4149, 8N-3896 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
i04040907 SEBP5436
3529766 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3516C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
  3T-3423 [1] CUP  
  3T-3424 [1] PLUG-FELT  
  9G-4101 [1] BUSHING-END  
8. 3T-9525 Y [1] PLATE AS-BRUSH (STARTING MOTOR)  
9. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
10. 3T-3422 [1] WIRE AS  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 3T-3434 [6] PLUG (FELT)  
14. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
15. 3L-3380 [1] BUSHING-TERMINAL  
16. 8C-3089 [1] SEAL-O-RING  
17. 4M-1853 [1] LEVER AS-SHIFT  
18. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
19. 7L-2894 [4] GASKET  
20. 4M-1831 [4] PLUG-LEVER HOUSING  
21. 4M-1854 [1] SHAFT-LEVER  
22. 1H-1023 [1] SEAL-O-RING  
23. 2D-6392 [1] SEAL-O-RING  
24. 528-6787 [1] HOUSING AS-DRIVE  
25. 6N-3826 [1] DRIVE AS-MOTOR  
26. 2H-3429 [1] RING-RETAINING  
27. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
28. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
29. 6N-3279 [1] INSULATOR  
30. 0S-1597 [13] BOLT (1/4-28X1-IN)  
31. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
32. 1H-2629 [3] STRIP-INSULATION  
33. 7M-0324 [1] COIL AS-FIELD  
34. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
35. 7F-3488 [6] SHOE-POLE  
36. 7M-8651 [1] ARMATURE AS  
37. 7M-0325 [1] INSULATOR  
38. 3T-9524 [6] BRUSH AS  
39. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & WASHERS)
40. 338-3453 [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
  3R-8801 [1] CLAMP  
41. 3R-8801 [1] CLAMP  
42. 8F-1434 [2] LOCKWASHER  
43. 6V-8188 [6] NUT (1/2-13-THD)  
44. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
45. 4B-2049 [6] NUT (10-32-THD)  
46. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
47. 3T-9494 [6] SPRING  
48. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
49. 9G-4101 [1] BUSHING-END  
50. 3T-3424 [3] PLUG-FELT  
51. 3T-3423 [3] CUP  
52. 1M-9968 [1] BUSHING  
53. 2F-6678 [1] SEAL-LIP TYPE  
54. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
55. 4M-1896 [1] BUSHING-TERMINAL  
56. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
57. 351-8955 [1] SEAL-O-RING  
58. 125-6535 [1] COVER-STARTING MOTOR  
  Y   SEPARATE ILLUSTRATION
 

#SEBP54360987
 

6V-0927: STARTING MOTOR GP-ELECTRIC

6V-0927 STARTING MOTOR GP-ELECTRIC
S/N SCK1-UP
24-VOLT
PART OF 335-4149, 8N-3896 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@338-3454@@@@@
AN ATTACHMENT
i00068501 SEBP5436
6V0927 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3516C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
  3T-3423 [1] CUP  
  9G-4101 [1] BUSHING-END  
  3T-3424 [1] PLUG-FELT  
8. 3T-9525 Y [1] PLATE AS-BRUSH (STARTING MOTOR)  
9. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
10. 3T-3422 [1] WIRE AS  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 3T-3434 B [6] PLUG  
14. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
15. 3L-3380 [1] BUSHING-TERMINAL  
16. 036-9821 [1] WASHER  
17. 4M-1828 [1] RETAINER-SPRING  
18. 306-3998 [1] BOOT-RUBBER  
19. 4M-1827 [1] RETAINER-SPRING  
20. 9M-7609 [1] SPRING (SHIFT LEVER)  
21. 8C-3089 [1] SEAL-O-RING  
22. 4M-1853 [1] LEVER AS-SHIFT  
23. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
24. 7L-2894 [4] GASKET  
25. 4M-1831 [4] PLUG-LEVER HOUSING  
26. 4M-1854 [1] SHAFT-LEVER  
27. 1H-1023 [1] SEAL-O-RING  
28. 2D-6392 [1] SEAL-O-RING  
29. 7T-3974 [1] HOUSING AS-DRIVE  
30. 6N-3826 [1] DRIVE AS-MOTOR  
31. 2H-3429 [2] RING-RETAINING (EXTERNAL)  
32. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
33. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
34. 6N-3279 [1] INSULATOR  
35. 0S-1597 [13] BOLT (1/4-28X1-IN)  
36. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
37. 1H-2629 [3] STRIP-INSULATION  
38. 7M-0324 [1] COIL AS-FIELD  
39. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
40. 7F-3488 [6] SHOE-POLE  
41. 7M-8651 [1] ARMATURE AS  
42. 7M-0325 [1] INSULATOR  
43. 3T-9524 [6] BRUSH AS (STARTING MOTOR)  
44. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & WASHERS)
46. 3R-8801 [1] CLAMP  
47. 8F-1434 [2] LOCKWASHER  
48. 6V-8188 [6] NUT (1/2-13-THD)  
49. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
50. 4B-2049 [6] NUT (10-32-THD)  
51. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
52. 3T-9494 [6] SPRING (STARTING MOTOR BRUSH)  
53. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
54. 9G-4101 [1] BUSHING-END  
55. 3T-3424 [3] PLUG-FELT  
56. 3T-3423 [3] CUP  
57. 1M-9968 [1] BUSHING  
58. 2F-6678 [1] SEAL-LIP TYPE  
59. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
60. 4M-1896 [1] BUSHING-TERMINAL  
61. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
62. 125-6535 [1] COVER-STARTING MOTOR  
63. 7T-9123 [1] GASKET-PLATE  
64. 125-6536 [1] TERMINAL AS  
65. 338-3453 [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
  3R-8801 [1] CLAMP  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP54360988
 

8N-3896: STARTING MOTOR GP-ELECTRIC

8N-3896 STARTING MOTOR GP-ELECTRIC -DUAL
S/N SCK1-UP
24-VOLT
Type 1
AN ATTACHMENT
i00430702 SEBP5436
8N3896 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3516C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-0927 Y [2] STARTING MOTOR GP-ELECTRIC  
2. 9Y-6089 C [2] GASKET  
3. 7J-8902 [6] BOLT-12 POINT HEAD (5/8-11X1.5-IN)  
4. 7L-5887 [1] CABLE AS (0000-GA)  
  5P-0745 BE CABLE (0000-GA)  
  3L-7634 [2] TERMINAL-RING (0000-GA, 1/2-IN SCREW)  
5. 3L-7604 [4] SHIELD-TERMINAL  
6. 4L-6155 [1] CABLE AS (0000-GA)  
  5P-0745 BE CABLE (0000-GA)  
  3L-7634 [2] TERMINAL-RING (0000-GA, 1/2-IN SCREW)  
7. 3L-6836 [1] SPACER (0.5X0.75X0.56-IN THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#SEBP54360989
 

8N-3896: STARTING MOTOR GP-ELECTRIC

8N-3896 STARTING MOTOR GP-ELECTRIC -DUAL
S/N SCK1-UP
24-VOLT
Type 2
AN ATTACHMENT
i05261410 SEBP5436
8N3896 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3516C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 352-9766 CY [2] STARTING MOTOR GP-ELECTRIC (24-VOLT)  
2. 9Y-6089 [2] GASKET  
3. 7J-8902 [6] BOLT-12 POINT HEAD (5/8-11X1.5-IN)  
4. 7L-5887 [1] CABLE AS (0000-GA)  
  3L-7634 [2] TERMINAL-RING (0000-GA, 1/2-IN SCREW)  
5. 294-2319 C [4] COVER-TERMINAL (BLACK)  
6. 4L-6155 [1] CABLE AS (0000-GA)  
7. 3L-6836 [1] SPACER (0.5X0.75X0.56-IN THK)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Caterpillar Parts SIS Catalog 3516C :

SENSOR GP-TEMPERATURE
363-2922 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
363-2921 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
326-8059 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
326-8058 SENSOR GP-TEMPERATURE
284-3541 SENSOR GP-TEMPERATURE
271-0185 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
259-2168 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
259-2168 SENSOR GP-TEMPERATURE
STARTING MOTOR GP-AIR
375-2608 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
7C-3372 STARTING MOTOR GP-AIR
STARTING MOTOR GP-ELECTRIC
335-4149 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
335-4149 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
338-3454 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
352-9766 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
6V-0927 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
8N-3896 STARTING MOTOR GP-ELECTRIC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.