AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

421-3458 DOOR GP-ACCESS -PUMP COMPARTMENT S/N DWR254-UP PART OF 283-3864 DOOR & MTG GP-ACCESS 311D LRR


FRAME AND BODY
DOOR GP
FENDER GP
FIREWALL GP
FRAME GP
GEAR & BEARING GP

EXCAVATOR 311D LRR EXCAVATOR DWR
 311D LRR Excavator DWR00001-UP (MACHINE) POWERED BY C4.2 Engine SEBP5455 311D LRR DWR   (2009)

FRAME AND BODY

DOOR GP
DOOR & MTG GP-ACCESS
283-3864 DOOR & MTG GP-ACCESS
DOOR & MTG GP-ACCESS
283-3864 DOOR & MTG GP-ACCESS
DOOR & MTG GP-ACCESS
283-3864 DOOR & MTG GP-ACCESS
DOOR GP-ACCESS
283-3881 DOOR GP-ACCESS
DOOR GP-ACCESS
293-6658 DOOR GP-ACCESS
DOOR GP-ACCESS
358-9854 DOOR GP-ACCESS
DOOR GP-ACCESS
358-9855 DOOR GP-ACCESS
DOOR GP-ACCESS
421-3456 DOOR GP-ACCESS
DOOR GP-ACCESS
421-3458 DOOR GP-ACCESS
 

#SEBP54550290
 

421-3458: DOOR GP-ACCESS

421-3458 DOOR GP-ACCESS -PUMP COMPARTMENT
S/N DWR254-UP
PART OF 283-3864 DOOR & MTG GP-ACCESS
i05255058 SEBP5455
4213458 DOOR GP-ACCESS Parts scheme
  For full view, you need register

Parts for your 311D LRR EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 099-6418 M [4] NUT (M6X1-THD)  
2. 184-8862 [1] COVER  
3. 283-3882 [1] LINER  
4. 283-3883 [1] LINER  
5. 142-0963 [2] HINGE  
6. 505-5963 [1] LATCH AS  
  385-3458 J [1] LOCK AS  
7. 184-8874 [1] ROD  
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

#SEBP54550291
 

293-6989: FENDER GP

293-6989 FENDER GP
S/N DWR1-UP
PART OF 340-3782 CHASSIS AR
i02794266 SEBP5455
2936989 FENDER GP Parts scheme
  For full view, you need register

Parts for your 311D LRR EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 135-8573 [3] BOLT AS  
2. 135-8577 [2] BOLT AS  
3. 195-0035 M [4] BOLT-SPECIAL  
4. 199-0314 [1] LINER  
6. 293-7060 [1] COVER AS  
  5P-9205 D SEAL (0.4-M)  
7. 304-0080 [1] COVER AS  
8. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP54550292
 

283-3867: FIREWALL GP

283-3867 FIREWALL GP
S/N DWR1-UP
PART OF 283-3664 HOOD & GUARD GP
i02794445 SEBP5455
2833867 FIREWALL GP Parts scheme
  For full view, you need register

Parts for your 311D LRR EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 135-8572 [13] BOLT AS  
2. 135-8573 [22] BOLT AS  
3. 283-3994 [1] SHEET AS  
4. 283-3996 [1] SHEET AS  
  101-9848 D SEAL (0.4-M)  
5. 283-3997 [1] SHEET AS  
  101-9848 D SEAL (0.23-M)  
  4I-7924 [3] WASHER (4.5X40X1.2-MM THK)  
  6P-2216 [3] CAP (PUSH ON)  
  307-7817 [1] INSULATION  
6. 283-3999 Y [1] SHEET AS-SOUND SUPPRESSION  
7. 283-4002 Y [1] SHEET AS-SOUND SUPPRESSION  
8. 283-4004 Y [1] SHEET AS-SOUND SUPPRESSION  
9. 283-4008 [1] SHEET AS  
10. 303-9666 [1] SHEET AS  
  303-9667 [1] LINER  
11. 307-7966 [1] SHEET AS  
  4I-7924 [2] WASHER (4.5X40X1.2-MM THK)  
  6P-2216 [2] CAP (PUSH ON)  
  307-7968 [1] INSULATION  
  D   ORDER BY THE METER
  Y   SEPARATE ILLUSTRATION
 

#SEBP54550293
 

337-1473: FRAME GP-UPPER

337-1473 FRAME GP-UPPER
S/N DWR1-163
PART OF 340-3782 CHASSIS AR
i03634925 SEBP5455
3371473 FRAME GP-UPPER Parts scheme
  For full view, you need register

Parts for your 311D LRR EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1R-6229 [2] PIN AS  
2. 093-0065 B [2] SHIM (1-MM THK)  
3. 093-0083 B [1] SHIM (1-MM THK)  
4. 093-0097 B [2] SHIM (2-MM THK)  
5. 093-0115 B [1] SHIM (2-MM THK)  
6. 093-0357 [2] SPACER (63X100X9-MM THK)  
7. 133-2425 B [2] SHIM (0.5-MM THK)  
8. 133-2717 B [2] SHIM (0.5-MM THK)  
9. 212-2837 [2] SHIM (2-MM THK)  
10. 245-7900 J [1] CAP  
11. 245-7901 J [1] CAP  
12. 282-4502 [1] PIN AS  
13. 337-1474 [1] FRAME AS-UPPER  
13A. 7Y-0633 [1] BOSS  
13B. 321-2071 [1] STEP AS  
14. 086-0297 [2] WASHER (13X50X6-MM THK)  
15. 086-0299 [1] WASHER (22X60X9-MM THK)  
16. 8T-4179 M [2] BOLT (M12X1.75X20-MM)  
17. 8T-4780 M [1] BOLT (M20X2.5X30-MM)  
  B   USE AS REQUIRED
  J   USE ONLY ON MACHINE WITHOUT LOWER WIPER
  M   METRIC PART
 

#SEBP54550294
 

337-1473: FRAME GP-UPPER

337-1473 FRAME GP-UPPER
S/N DWR164-UP
PART OF 340-3782 CHASSIS AR
i04630141 SEBP5455
3371473 FRAME GP-UPPER Parts scheme
  For full view, you need register

Parts for your 311D LRR EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1R-6229 [2] PIN AS  
2. 093-0065 B [2] SHIM (1-MM THK)  
3. 093-0083 B [1] SHIM (1-MM THK)  
4. 093-0097 B [2] SHIM (2-MM THK)  
5. 093-0115 B [1] SHIM (2-MM THK)  
6. 093-0357 [2] SPACER (63X100X9-MM THK)  
7. 133-2425 B [2] SHIM (0.5-MM THK)  
8. 133-2717 B [2] SHIM (0.5-MM THK)  
9. 212-2837 [2] SHIM (2-MM THK)  
10. 245-7900 J [1] CAP  
11. 245-7901 J [1] CAP  
12. 282-4502 [1] PIN AS  
13. 352-9618 C [1] FRAME AS-UPPER  
13A. 7Y-0633 [1] BOSS  
13B. 321-2071 [1] STEP AS  
14. 086-0297 [2] WASHER (13X50X6-MM THK)  
15. 086-0299 [1] WASHER (22X60X9-MM THK)  
16. 8T-4179 M [2] BOLT (M12X1.75X20-MM)  
17. 8T-4780 M [1] BOLT (M20X2.5X30-MM)  
   
    THE FOLLOWING REPAIR PART IS AVAILABLE FOR REPAIR OF DAMAGED SKIRTS
  180-7614 F [1] PLATE-SKIRT (1100-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  J   USE ONLY ON MACHINE WITHOUT LOWER WIPER
  M   METRIC PART
 

#SEBP54550295
 

344-6830: FRAME GP-UPPER

344-6830 FRAME GP-UPPER -ACCUGRADE
S/N DWR1-UP
PART OF 346-4469, 346-4470 SPECIAL AR
Type 1
AN ATTACHMENT
i03635342 SEBP5455
3446830 FRAME GP-UPPER Parts scheme
  For full view, you need register

Parts for your 311D LRR EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1R-6229 [2] PIN AS  
2. 093-0065 B [2] SHIM (1-MM THK)  
3. 093-0083 B [1] SHIM (1-MM THK)  
4. 093-0097 B [2] SHIM (2-MM THK)  
5. 093-0115 B [1] SHIM (2-MM THK)  
6. 093-0349 [1] WASHER (22X60X6-MM THK)  
7. 093-0357 [2] SPACER (63X100X9-MM THK)  
8. 133-2425 B [2] SHIM (0.5-MM THK)  
9. 133-2717 B [2] SHIM (0.5-MM THK)  
10. 212-2837 [2] SHIM (2-MM THK)  
11. 245-7900 J [1] CAP  
12. 245-7901 J [1] CAP  
13. 308-8823 [1] PIN AS  
14. 308-8914 [1] PLATE  
15. 337-1474 [1] FRAME AS-UPPER  
15A. 7Y-0633 [1] BOSS  
15B. 321-2071 [1] STEP AS  
16. 086-0297 [2] WASHER (13X50X6-MM THK)  
17. 096-4883 M [2] LOCKNUT (M10X1.5-THD)  
18. 7X-2561 M [1] BOLT (M20X2.5X35-MM)  
19. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
20. 8T-4179 M [2] BOLT (M12X1.75X20-MM)  
21. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
  B   USE AS REQUIRED
  J   USE ONLY ON MACHINE WITHOUT LOWER WIPER
  M   METRIC PART
 

#SEBP54550296
 

344-6830: FRAME GP-UPPER

344-6830 FRAME GP-UPPER -ACCUGRADE
S/N DWR1-UP
PART OF 346-4469, 346-4470 SPECIAL AR
Type 2
AN ATTACHMENT
i04310129 SEBP5455
3446830 FRAME GP-UPPER Parts scheme
  For full view, you need register

Parts for your 311D LRR EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1R-6229 [2] PIN AS  
2. 093-0065 B [2] SHIM (1-MM THK)  
3. 093-0083 B [1] SHIM (1-MM THK)  
4. 093-0097 B [2] SHIM (2-MM THK)  
5. 093-0115 B [1] SHIM (2-MM THK)  
6. 093-0349 [1] WASHER (22X60X6-MM THK)  
7. 093-0357 [2] SPACER (63X100X9-MM THK)  
8. 133-2425 B [2] SHIM (0.5-MM THK)  
9. 133-2717 B [2] SHIM (0.5-MM THK)  
10. 212-2837 [2] SHIM (2-MM THK)  
11. 245-7900 J [1] CAP  
12. 245-7901 J [1] CAP  
13. 308-8823 [1] PIN AS  
14. 308-8914 [1] PLATE  
15. 352-9618 C [1] FRAME AS-UPPER  
15A. 7Y-0633 [1] BOSS  
15B. 321-2071 [1] STEP AS  
16. 086-0297 [2] WASHER (13X50X6-MM THK)  
17. 096-4883 M [2] LOCKNUT (M10X1.5-THD)  
18. 7X-2561 M [1] BOLT (M20X2.5X35-MM)  
19. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
20. 8T-4179 M [2] BOLT (M12X1.75X20-MM)  
21. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
   
    THE FOLLOWING REPAIR PART IS AVAILABLE FOR REPAIR OF DAMAGED SKIRTS
  180-7614 F [1] PLATE-SKIRT (1100-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  J   USE ONLY ON MACHINE WITHOUT LOWER WIPER
  M   METRIC PART
 

#SEBP54550297
 

344-6830: FRAME GP-UPPER

344-6830 FRAME GP-UPPER -ACCUGRADE
S/N DWR1-UP
PART OF 346-4469, 346-4470 SPECIAL AR
Type 3
AN ATTACHMENT
i05248961 SEBP5455
3446830 FRAME GP-UPPER Parts scheme
  For full view, you need register

Parts for your 311D LRR EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1R-6229 [2] PIN AS  
2. 093-0065 B [2] SHIM (1-MM THK)  
3. 093-0083 B [1] SHIM (1-MM THK)  
4. 093-0097 B [2] SHIM (2-MM THK)  
5. 093-0115 B [1] SHIM (2-MM THK)  
6. 093-0349 [1] WASHER (22X60X6-MM THK)  
7. 093-0357 [2] SPACER (63X100X9-MM THK)  
8. 133-2425 B [2] SHIM (0.5-MM THK)  
9. 133-2717 B [2] SHIM (0.5-MM THK)  
10. 212-2837 [2] SHIM (2-MM THK)  
11. 245-7900 J [1] CAP  
12. 245-7901 J [1] CAP  
13. 308-8823 [1] PIN AS  
14. 308-8914 [1] PLATE  
15. 385-3255 C [1] FRAME AS-UPPER  
15A. 321-2071 [1] STEP AS  
16. 086-0297 [2] WASHER (13X50X6-MM THK)  
17. 096-4883 M [2] LOCKNUT (M10X1.5-THD)  
18. 453-4174 M [1] BOLT (M20X2.5X35-MM)  
19. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
20. 8T-4179 M [2] BOLT (M12X1.75X20-MM)  
21. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
   
  180-7614 F [1] PLATE-SKIRT (1100-MM)  
   
    THE FOLLOWING REPAIR PART IS AVAILABLE FOR REPAIR OF DAMAGED SKIRTS
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  J   USE ONLY ON MACHINE WITHOUT LOWER WIPER
  M   METRIC PART
 

#SEBP54550298
 

169-5567: GEAR & BEARING GP-SWING

169-5567 GEAR & BEARING GP-SWING
S/N DWR1-UP
PART OF 283-8799 FRAME AR-UNDERCARRIAGE
i01441479 SEBP5455
1695567 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 311D LRR EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-7511 [1] RETAINER  
2. 4I-7512 [1] CLAMP-HOSE  
3. 4I-7444 [1] BOOT  
4. 8T-4136 M [12] BOLT (M10X1.5X25-MM)  
5. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
6. 5K-9243 [2] ELBOW-FLARED  
7. 7X-2555 M [34] BOLT (M16X2X80-MM)  
8. 095-1299 [1] DOWEL  
9. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
10. 4N-9170 [2] CLIP (LOOP)  
11. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
12. 4I-7446 [1] GASKET  
13. 4I-7326 [1] STRIP  
14. 169-5568 [1] TUBE AS  
15. 229-1077 Y [1] GEAR & BEARING GP-SWING (127-BEARING)  
16. 8T-0357 M [38] BOLT (M16X2X70-MM)  
17. 085-9310 [38] SPACER (16.6X32X26-MM THK)  
18. 1U-8846 B SEALANT-GASKET  
19. 191-2544 [34] WASHER (16.6X32X5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP54550299
 

169-5567: GEAR & BEARING GP-SWING

169-5567 GEAR & BEARING GP-SWING
S/N DWR1-226
PART OF 283-8799 FRAME AR-UNDERCARRIAGE
i04886985 SEBP5455
1695567 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 311D LRR EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-7511 [1] RETAINER  
2. 4I-7512 [1] CLAMP-HOSE  
3. 4I-7444 [1] BOOT  
4. 8T-4136 M [12] BOLT (M10X1.5X25-MM)  
5. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
6. 5K-9243 [2] ELBOW-FLARED  
7. 447-1708 M [34] BOLT (M16X2X80-MM)  
8. 095-1299 [1] DOWEL  
9. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
10. 4N-9170 [2] CLIP (LOOP)  
11. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
12. 4I-7446 [1] GASKET  
13. 4I-7326 [1] STRIP  
14. 169-5568 [1] TUBE AS  
15. 378-9588 CY [1] GEAR & BEARING GP-SWING  
16. 8T-0357 M [38] BOLT (M16X2X70-MM)  
17. 085-9310 [38] SPACER (16.6X32X26-MM THK)  
18. 191-2544 [34] WASHER (16.6X32X5-MM THK)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Service Magazine
A New Key Assembly is Available for Certain Excavators and Mobile Hydraulic Power Units {7251, 7273}
2011/06/20
Proper Maintenance Improves Performance of Lock Cylinders {0645, 7273, 7308}
Proper Maintenance Improves Performance of Lock Cylinders {0645, 7273, 7308}

Caterpillar Parts SIS Catalog 311D LRR :

DOOR GP-ACCESS
421-3456 DOOR GP-ACCESS
DOOR GP-ACCESS
358-9855 DOOR GP-ACCESS
DOOR GP-ACCESS
358-9854 DOOR GP-ACCESS
DOOR GP-ACCESS
293-6658 DOOR GP-ACCESS
DOOR GP-ACCESS
283-3881 DOOR GP-ACCESS
DOOR & MTG GP-ACCESS
283-3864 DOOR & MTG GP-ACCESS
DOOR & MTG GP-ACCESS
283-3864 DOOR & MTG GP-ACCESS
DOOR & MTG GP-ACCESS
283-3864 DOOR & MTG GP-ACCESS
FENDER GP
293-6989 FENDER GP
FIREWALL GP
283-3867 FIREWALL GP
FRAME GP-UPPER
337-1473 FRAME GP-UPPER
FRAME GP-UPPER
337-1473 FRAME GP-UPPER
FRAME GP-UPPER
344-6830 FRAME GP-UPPER
FRAME GP-UPPER
344-6830 FRAME GP-UPPER
FRAME GP-UPPER
344-6830 FRAME GP-UPPER
GEAR & BEARING GP-SWING
169-5567 GEAR & BEARING GP-SWING

Truck sale:

Caterpillar 311 D LRR, Construction
89,181 
Caterpillar 311 D LRR, Construction
- Crawler Excavators
WESTRAC
Western Australia, Australia
Caterpillar 311DLRR, Construction
90,000 
Caterpillar 311DLRR, Construction
- Crawler Excavators
MACALLISTER MACHINERY CO., INC
Caterpillar 311DLRR, Construction
98,500 
Caterpillar 311DLRR, Construction
- Crawler Excavators
OHIO CAT
Caterpillar 311DLRR, Construction
89,000 
Caterpillar 311DLRR, Construction
- Crawler Excavators
MACALLISTER MACHINERY CO., INC
CATERPILLAR 311DLRR 2011
$57,905 USD 
CATERPILLAR 311DLRR 2011
- TRACK EXCAVATORS
GOUGH CAT
16 Branston Street - Christchurch -
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.