AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

337-1477 FRAME GP-UPPER S/N SKA1-272 PART OF 343-1107 CHASSIS AR 312D L EXCAVATOR


FRAME AND BODY
FRAME GP
GEAR & BEARING GP

EXCAVATOR 312D L EXCAVATOR SKA
 312D L Excavator SKA00001-UP (MACHINE) POWERED BY C4.2 Engine SEBP5457 312D L SKA   (2009)

FRAME AND BODY

FRAME GP
FRAME GP-UPPER
337-1477 FRAME GP-UPPER
FRAME GP-UPPER
337-1477 FRAME GP-UPPER
FRAME GP-UPPER
344-6831 FRAME GP-UPPER
FRAME GP-UPPER
344-6831 FRAME GP-UPPER
 

#SEBP54570230
 

337-1477: FRAME GP-UPPER

337-1477 FRAME GP-UPPER
S/N SKA1-272
PART OF 343-1107 CHASSIS AR
i04255350 SEBP5457
3371477 FRAME GP-UPPER Parts scheme
  For full view, you need register

Parts for your 312D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1R-6229 [2] PIN AS  
2. 093-0065 B [2] SHIM (1-MM THK)  
3. 093-0083 B [1] SHIM (1-MM THK)  
4. 093-0097 B [2] SHIM (2-MM THK)  
5. 093-0115 B [1] SHIM (2-MM THK)  
6. 093-0357 [2] WASHER (63X100X9-MM THK)  
7. 093-0363 [1] SPACER (83X120X12-MM THK)  
8. 133-2425 B [2] SHIM (0.5-MM THK)  
9. 133-2717 B [4] SHIM (0.5-MM THK)  
10. 212-2837 [2] SHIM (2-MM THK)  
11. 282-4464 [1] PIN AS  
12. 352-9640 C [1] FRAME AS-UPPER  
12A. 7Y-0633 [1] BOSS  
12B. 186-5639 [1] STEP AS  
13. 086-0297 [2] WASHER (13X50X6-MM THK)  
14. 086-0299 [1] WASHER (22X60X9-MM THK)  
15. 8T-4179 M [2] BOLT (M12X1.75X20-MM)  
16. 8T-4780 M [1] BOLT (M20X2.5X30-MM)  
   
    THE FOLLOWING REPAIR PART(S) ARE AVAILABLE FOR REPAIR OF DAMAGED SKIRTS
  180-7614 F [1] PLATE-SKIRT (1100-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP54570231
 

337-1477: FRAME GP-UPPER

337-1477 FRAME GP-UPPER
S/N SKA273-UP
PART OF 343-1107 CHASSIS AR
i04977849 SEBP5457
3371477 FRAME GP-UPPER Parts scheme
  For full view, you need register

Parts for your 312D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1R-6229 [2] PIN AS  
2. 093-0065 B [2] SHIM (1-MM THK)  
3. 093-0083 B [1] SHIM (1-MM THK)  
4. 093-0097 B [2] SHIM (2-MM THK)  
5. 093-0115 B [1] SHIM (2-MM THK)  
6. 093-0357 [2] WASHER (63X100X9-MM THK)  
8. 133-2425 B [2] SHIM (0.5-MM THK)  
9. 133-2717 B [4] SHIM (0.5-MM THK)  
10. 212-2837 [2] SHIM (2-MM THK)  
11. 348-0629 C [1] PIN AS  
12. 385-3258 C [1] FRAME AS-UPPER  
12A. 186-5639 [1] STEP AS  
13. 086-0297 [2] WASHER (13X50X6-MM THK)  
14. 086-0299 [1] WASHER (22X60X9-MM THK)  
15. 8T-4179 M [2] BOLT (M12X1.75X20-MM)  
16. 453-2844 M [1] BOLT (M20X2.5X30-MM)  
   
    THE FOLLOWING REPAIR PART(S) ARE AVAILABLE FOR REPAIR OF DAMAGED SKIRTS
  180-7614 F [1] PLATE-SKIRT (1100-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP54570232
 

344-6831: FRAME GP-UPPER

344-6831 FRAME GP-UPPER -ACCUGRADE
S/N SKA1-UP
PART OF 346-4472 SPECIAL AR
Type 1
AN ATTACHMENT
i04310149 SEBP5457
3446831 FRAME GP-UPPER Parts scheme
  For full view, you need register

Parts for your 312D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1R-6229 [2] PIN AS  
2. 093-0065 B [2] SHIM (1-MM THK)  
3. 093-0083 B [1] SHIM (1-MM THK)  
4. 093-0097 B [2] SHIM (2-MM THK)  
5. 093-0115 B [1] SHIM (2-MM THK)  
6. 093-0349 [1] WASHER (22X60X6-MM THK)  
7. 093-0357 [2] WASHER (63X100X9-MM THK)  
8. 093-0363 [1] SPACER (83X120X12-MM THK)  
9. 133-2425 B [2] SHIM (0.5-MM THK)  
10. 133-2717 B [4] SHIM (0.5-MM THK)  
11. 212-2837 [2] SHIM (2-MM THK)  
12. 308-8807 [1] PIN AS  
13. 308-8914 [1] PLATE  
14. 352-9640 C [1] FRAME AS-UPPER  
14A. 7Y-0633 [1] BOSS  
14B. 186-5639 [1] STEP AS  
15. 086-0297 [2] WASHER (13X50X6-MM THK)  
16. 096-4883 M [2] LOCKNUT (M10X1.5-THD)  
17. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
18. 8T-4179 M [2] BOLT (M12X1.75X20-MM)  
19. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
20. 8T-6430 M [1] BOLT (M20X2.5X50-MM)  
   
    THE FOLLOWING REPAIR PARTS ARE AVAILABLE FOR REPAIR OF DAMAGED SKIRTS
  180-7614 F [1] PLATE-SKIRT (1100-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP54570233
 

344-6831: FRAME GP-UPPER

344-6831 FRAME GP-UPPER -ACCUGRADE
S/N SKA1-UP
PART OF 346-4472 SPECIAL AR
Type 2
AN ATTACHMENT
i04977749 SEBP5457
3446831 FRAME GP-UPPER Parts scheme
  For full view, you need register

Parts for your 312D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1R-6229 [2] PIN AS  
2. 093-0065 B [2] SHIM (1-MM THK)  
3. 093-0083 B [1] SHIM (1-MM THK)  
4. 093-0097 B [2] SHIM (2-MM THK)  
5. 093-0115 B [1] SHIM (2-MM THK)  
6. 093-0349 [1] WASHER (22X60X6-MM THK)  
7. 093-0357 [2] WASHER (63X100X9-MM THK)  
9. 133-2425 B [2] SHIM (0.5-MM THK)  
10. 133-2717 B [4] SHIM (0.5-MM THK)  
11. 212-2837 [2] SHIM (2-MM THK)  
12. 385-3225 C [1] PIN AS  
13. 308-8914 [1] PLATE  
14. 385-3258 C [1] FRAME AS-UPPER  
14A. 186-5639 [1] STEP AS  
15. 086-0297 [2] WASHER (13X50X6-MM THK)  
16. 096-4883 M [2] LOCKNUT (M10X1.5-THD)  
17. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
18. 8T-4179 M [2] BOLT (M12X1.75X20-MM)  
19. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
20. 453-2845 CM [1] BOLT (M20X2.5X40-MM)  
   
  180-7614 F [1] PLATE-SKIRT (1100-MM)  
   
    THE FOLLOWING REPAIR PARTS ARE AVAILABLE FOR REPAIR OF DAMAGED SKIRTS
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP54570234
 

169-5567: GEAR & BEARING GP-SWING

169-5567 GEAR & BEARING GP-SWING
S/N SKA1-UP
PART OF 283-9040 FRAME AR-UNDERCARRIAGE
Type 1
i01441479 SEBP5457
1695567 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 312D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-7511 [1] RETAINER  
2. 4I-7512 [1] CLAMP-HOSE  
3. 4I-7444 [1] BOOT  
4. 8T-4136 M [12] BOLT (M10X1.5X25-MM)  
5. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
6. 5K-9243 [2] ELBOW-FLARED  
7. 7X-2555 M [34] BOLT (M16X2X80-MM)  
8. 095-1299 [1] DOWEL  
9. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
10. 4N-9170 [2] CLIP  
11. 3B-8489 [1] FITTING-GREASE  
12. 4I-7446 [1] GASKET  
13. 4I-7326 [1] STRIP  
14. 169-5568 [1] TUBE AS  
15. 229-1077 Y [1] GEAR & BEARING GP-SWING (127-BEARING)  
16. 8T-0357 M [38] BOLT (M16X2X70-MM)  
17. 085-9310 [38] SPACER (16.6X32X26-MM THK)  
18. 1U-8846 B SEALANT-GASKET  
19. 191-2544 [34] WASHER (16.6X32X5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP54570235
 

169-5567: GEAR & BEARING GP-SWING

169-5567 GEAR & BEARING GP-SWING
S/N SKA1-UP
PART OF 283-9040 FRAME AR-UNDERCARRIAGE
Type 2
i04886985 SEBP5457
1695567 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 312D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-7511 [1] RETAINER  
2. 4I-7512 [1] CLAMP-HOSE  
3. 4I-7444 [1] BOOT  
4. 8T-4136 M [12] BOLT (M10X1.5X25-MM)  
5. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
6. 5K-9243 [2] ELBOW-FLARED  
7. 447-1708 M [34] BOLT (M16X2X80-MM)  
8. 095-1299 [1] DOWEL  
9. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
10. 4N-9170 [2] CLIP  
11. 3B-8489 [1] FITTING-GREASE  
12. 4I-7446 [1] GASKET  
13. 4I-7326 [1] STRIP  
14. 169-5568 [1] TUBE AS  
15. 378-9588 CY [1] GEAR & BEARING GP-SWING  
16. 8T-0357 M [38] BOLT (M16X2X70-MM)  
17. 085-9310 [38] SPACER (16.6X32X26-MM THK)  
18. 191-2544 [34] WASHER (16.6X32X5-MM THK)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP54570236
 

199-4573: GEAR & BEARING GP-SWING

199-4573 GEAR & BEARING GP-SWING
S/N SKA1-UP
PART OF 346-4639, 346-4641 INSTALLATION AR-BLADE
AN ATTACHMENT
i01678913 SEBP5457
1994573 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 312D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 121-5204 [1] RETAINER  
2. 099-0913 [1] CLAMP-HOSE  
3. 121-5203 [1] BOOT  
4. 8T-4136 M [12] BOLT (M10X1.5X25-MM)  
5. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
6. 5K-9243 [2] ELBOW-FLARED  
7. 7X-2555 M [34] BOLT (M16X2X80-MM)  
8. 095-1299 [1] DOWEL  
9. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
10. 4N-9170 [2] CLIP  
11. 3B-8489 [1] FITTING-GREASE  
12. 4I-7446 [1] GASKET  
13. 4I-7326 [1] STRIP  
14. 169-5568 [1] TUBE AS  
15. 229-1077 Y [1] GEAR & BEARING GP-SWING (127-BEARING)  
16. 8T-0357 M [38] BOLT (M16X2X70-MM)  
17. 085-9310 [38] SPACER (16.6X32X26-MM THK)  
18. 1U-8846 B SEALANT-GASKET  
19. 191-2544 [34] WASHER (16.6X32X5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP54570237
 

229-1077: GEAR & BEARING GP-SWING

229-1077 GEAR & BEARING GP-SWING
S/N SKA1-UP
PART OF 169-5567, 199-4573 GEAR & BEARING GP-SWING
ALSO AN ATTACHMENT
i04861899 SEBP5457
2291077 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 312D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE  
2. 229-1078 [1] SEAL-DUST  
3. 148-4685 E SEAL ((309-CM))  
  E   ORDER BY THE CENTIMETER
 

#SEBP54570238
 

378-9588: GEAR & BEARING GP-SWING

378-9588 GEAR & BEARING GP-SWING
S/N SKA1-UP
PART OF 169-5567 GEAR & BEARING GP-SWING
i04862049 SEBP5457
3789588 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 312D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE  
2. 229-1078 [1] SEAL-DUST  
3. 148-4685 E SEAL (309-CM)  
  E   ORDER BY THE CENTIMETER
 

#SEBP54570239
 

378-9596: GEAR & BEARING GP-SWING

378-9596 GEAR & BEARING GP-SWING
S/N SKA273-UP
PART OF 283-9040 FRAME AR-UNDERCARRIAGE
i04937380 SEBP5457
3789596 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 312D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-7444 [1] BOOT  
2. 4I-7446 [1] GASKET  
3. 4I-7511 [1] RETAINER  
4. 191-2544 [34] WASHER (16.6X32X5-MM THK)  
5. 378-9598 Y [1] GEAR & BEARING GP-SWING  
6. 227-6186 [38] SPACER (16.6X32X26-MM THK)  
7. 095-1299 [1] DOWEL  
8. 4I-7326 [1] STRIP  
9. 4I-7512 [1] CLAMP-HOSE  
10. 447-1708 M [34] BOLT (M16X2X80-MM)  
11. 8T-0357 M [38] BOLT (M16X2X70-MM)  
12. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4136 M [12] BOLT (M10X1.5X25-MM)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 312D L :

FENDER & COVER GP
330-1163 FENDER & COVER GP
FENDER & COVER GP
244-8041 FENDER & COVER GP
DOOR GP-ACCESS
421-3699 DOOR GP-ACCESS
DOOR GP-ACCESS
421-3699 DOOR GP-ACCESS
DOOR GP-ACCESS
375-3044 DOOR GP-ACCESS
DOOR GP-ACCESS
374-4948 DOOR GP-ACCESS
DOOR GP-ACCESS
355-8270 DOOR GP-ACCESS
DOOR GP-ACCESS
355-8251 DOOR GP-ACCESS
FRAME GP-UPPER
337-1477 FRAME GP-UPPER
FRAME GP-UPPER
344-6831 FRAME GP-UPPER
FRAME GP-UPPER
344-6831 FRAME GP-UPPER
GEAR & BEARING GP-SWING
169-5567 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
169-5567 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
199-4573 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
229-1077 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
378-9588 GEAR & BEARING GP-SWING

Truck sale:

 
68,998 
Caterpillar 312DL, Construction
- Crawler Excavators
GOUGH
New Zealand
Caterpillar 312DL, Construction
52,816 
Caterpillar 312DL, Construction
- Crawler Excavators
TOROMONT CAT
Canada
CATERPILLAR 312DL 2011
 
CATERPILLAR 312DL 2011
- TRACK EXCAVATORS
PESA
CATERPILLAR 312DL 2013
 
CATERPILLAR 312DL 2013
- TRACK EXCAVATORS
GOUGH CAT
16 Branston Street - Christchurch -
CATERPILLAR 312DL 2011
$44,000 USD 
CATERPILLAR 312DL 2011
- TRACK EXCAVATORS
UNIMAQ S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.