OPERATOR STATION
CONSOLE GPELECTRICAL AND STARTING SYSTEM
RADIO GPSENSOR GP
OPERATOR STATION
CONSOLE GP
#SEBP54640220
251-0544: PANEL GP-SWITCH
251-0544 PANEL GP-SWITCH -ENGINE SPEED, START
S/N BZN1-UP
PART OF 227-7581 INSTALLATION GP-SECURITY
Type 1
AN ATTACHMENT
S/N BZN1-UP
PART OF 227-7581 INSTALLATION GP-SECURITY
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 315D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [5] | STRAP-CABLE | |
| 2. | 9G-7641 Y | [1] | SWITCH GP-START (ENGINE, KEY) | |
| 3. | 319-4420 CY | [1] | SWITCH GP-ROTARY (THROTTLE POSITION) | |
| 4. | 185-9208 | [1] | KNOB AS | |
| 5. | 205-0826 | [1] | FILM-INSTRUCTION (MACHINE SECURITY, CONSOLE) | |
| 6. | 206-5208 | [1] | COIL AS (EXCITER) | |
| 7. | 234-1156 | [1] | COVER | |
| 8. | 267-7977 | [1] | PANEL | |
| 9. | 328-0021 C | [1] | HARNESS AS-CONSOLE | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3S-2093 | [3] | STRAP-CABLE | ||
| 7Y-3951 | [2] | TERMINAL-BLADE (14-GA) | ||
| 7Y-3952 | [1] | PLUG-CONNECTOR (2-PIN) | ||
| 7Y-3962 | [1] | TERMINAL-BULLET (MALE) | ||
| 7Y-3963 | [1] | TERMINAL-BULLET (FEMALE) | ||
| 8T-8737 | [3] | PLUG-SEAL | ||
| 121-1168 | [1] | CONNECTOR-RECEPTACLE | ||
| 121-1173 | [14] | TERMINAL (MALE) | ||
| 9X-3402 | [7] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 2L-8075 | [4] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 153-2540 | [10] | TERMINAL (FEMALE) | ||
| 153-2541 | [1] | PLUG-CONNECTOR (10-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 238-2366 | [7] | TERMINAL (MALE) | ||
| 10. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 11. | 119-5026 | [4] | SCREW-PAN HEAD (10-16X0.63-IN) | |
| 12. | 6V-9491 M | [4] | SCREW-MACHINE (M4X0.7X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP54640221
251-0544: PANEL GP-SWITCH
251-0544 PANEL GP-SWITCH -ENGINE SPEED, START
S/N BZN1-UP
PART OF 227-7581 INSTALLATION GP-SECURITY
Type 2
AN ATTACHMENT
S/N BZN1-UP
PART OF 227-7581 INSTALLATION GP-SECURITY
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 315D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [5] | STRAP-CABLE | |
| 2. | 255-2751 CJY | [1] | SWITCH GP-START (ENGINE, KEY) | |
| 3. | 319-4420 Y | [1] | SWITCH GP-ROTARY (THROTTLE POSITION) | |
| 4. | 185-9208 | [1] | KNOB AS | |
| 5. | 205-0826 | [1] | FILM-INSTRUCTION (MACHINE SECURITY, CONSOLE) | |
| 6. | 206-5208 | [1] | COIL AS (EXCITER) | |
| 7. | 234-1156 | [1] | COVER | |
| 8. | 267-7977 | [1] | PANEL | |
| 9. | 328-0021 | [1] | HARNESS AS-CONSOLE | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3S-2093 | [3] | STRAP-CABLE | ||
| 7Y-3951 | [2] | TERMINAL-BLADE (14-GA) | ||
| 7Y-3952 | [1] | PLUG-CONNECTOR (2-PIN) | ||
| 7Y-3962 | [1] | TERMINAL-BULLET (MALE) | ||
| 7Y-3964 | [1] | TUBE (CONNECTOR TERMINAL) | ||
| 7Y-3963 | [1] | TERMINAL-BULLET (FEMALE) | ||
| 7Y-3965 | [1] | TUBE (RECEPTACLE TERMINAL) | ||
| 8T-8737 | [3] | PLUG-SEAL | ||
| 121-1168 | [1] | CONNECTOR-RECEPTACLE | ||
| 121-1173 | [14] | TERMINAL (MALE) | ||
| 9X-3402 | [7] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 2L-8075 | [4] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 153-2540 | [10] | TERMINAL (FEMALE) | ||
| 153-2541 | [1] | PLUG-CONNECTOR (10-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 238-2366 | [7] | TERMINAL (MALE) | ||
| 10. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 11. | 119-5026 | [4] | SCREW-PAN HEAD (10-16X0.63-IN) | |
| 12. | 6V-9491 M | [4] | SCREW-MACHINE (M4X0.7X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | REQUIRES CORPORATE KEY | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP54640222
251-0544: PANEL GP-SWITCH
251-0544 PANEL GP-SWITCH -ENGINE SPEED, START
S/N BZN1-UP
PART OF 227-7581 INSTALLATION GP-SECURITY
Type 3
AN ATTACHMENT
S/N BZN1-UP
PART OF 227-7581 INSTALLATION GP-SECURITY
Type 3
AN ATTACHMENT
For full view, you need register
Parts for your 315D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [5] | STRAP-CABLE | |
| 2. | 255-2751 JY | [1] | SWITCH GP-START (ENGINE, KEY) | |
| 3. | 319-4420 Y | [1] | SWITCH GP-ROTARY (THROTTLE POSITION) | |
| 4. | 185-9208 | [1] | KNOB AS | |
| 5. | 205-0826 | [1] | FILM-INSTRUCTION (MACHINE SECURITY, CONSOLE) | |
| 6. | 206-5208 | [1] | COIL AS (EXCITER) | |
| 7. | 234-1156 | [1] | COVER | |
| 8. | 267-7977 | [1] | PANEL | |
| 9. | 495-9718 CY | [1] | HARNESS AS-PANEL | |
| 10. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 11. | 119-5026 | [4] | SCREW-PAN HEAD (10-16X0.63-IN) | |
| 12. | 123-0707 M | [4] | SCREW-HEX SOCKET (M4X0.7X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | REQUIRES CORPORATE KEY | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP54640223
336-3545: RADIO GP-COMMUNICATION
336-3545 RADIO GP-COMMUNICATION -PRODUCT LINK 121SR
S/N BZN1-UP
PART OF 338-6886 CONTROL & MTG GP-COMMUNICATION
AN ATTACHMENT
S/N BZN1-UP
PART OF 338-6886 CONTROL & MTG GP-COMMUNICATION
AN ATTACHMENT
For full view, you need register
Parts for your 315D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 434-1356 | [1] | SOFTWARE GP-COMMUNICATION (PRODUCT LINK 121SR) |
#SEBP54640224
297-4469: SENSOR & MTG GP-POSITION
297-4469 SENSOR & MTG GP-POSITION -BOOM
S/N BZN1-UP
PART OF 343-1174 GRADE CONTROL AR
Type 1
AN ATTACHMENT
S/N BZN1-UP
PART OF 343-1174 GRADE CONTROL AR
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 315D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 169-0417 Y | [1] | SENSOR GP-POSITION (BOOM) | |
| 2. | 196-3273 | [1] | SPACER (10.9X17.3X90-MM THK) | |
| 3. | 297-4479 | [1] | LEVER AS | |
| 4. | 309-5694 | [1] | PLATE | |
| 5. | 131-3983 M | [4] | BOLT-SOCKET HEAD (M8X1.25X35-MM) | |
| 6. | 7X-2543 M | [1] | BOLT (M10X1.5X120-MM) | |
| 7. | 8C-8451 M | [2] | BOLT (M6X1X40-MM) | |
| 8. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 10. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP54640225
297-4469: SENSOR & MTG GP-POSITION
297-4469 SENSOR & MTG GP-POSITION -BOOM
S/N BZN1-UP
PART OF 343-1174 GRADE CONTROL AR
Type 2
AN ATTACHMENT
S/N BZN1-UP
PART OF 343-1174 GRADE CONTROL AR
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 315D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 361-4360 CY | [1] | SENSOR GP-POSITION (ROTARY)(BOOM) | |
| 2. | 196-3273 | [1] | SPACER (10.9X17.3X90-MM THK) | |
| 3. | 297-4479 | [1] | LEVER AS | |
| 4. | 309-5694 | [1] | PLATE | |
| 5. | 131-3983 M | [4] | BOLT-SOCKET HEAD (M8X1.25X35-MM) | |
| 6. | 7X-2543 M | [1] | BOLT (M10X1.5X120-MM) | |
| 7. | 8C-8451 M | [2] | BOLT (M6X1X40-MM) | |
| 8. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 10. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP54640226
297-4469: SENSOR & MTG GP-POSITION
297-4469 SENSOR & MTG GP-POSITION -BOOM
S/N BZN1-UP
PART OF 343-1174 GRADE CONTROL AR
Type 3
AN ATTACHMENT
S/N BZN1-UP
PART OF 343-1174 GRADE CONTROL AR
Type 3
AN ATTACHMENT
For full view, you need register
Parts for your 315D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 361-4360 Y | [1] | SENSOR GP-POSITION (ROTARY)(BOOM) | |
| 2. | 196-3273 | [1] | SPACER (10.9X17.3X90-MM THK) | |
| 3. | 383-5091 | [1] | LEVER AS | |
| 4. | 309-5694 | [1] | PLATE | |
| 5. | 131-3983 M | [4] | BOLT-SOCKET HEAD (M8X1.25X35-MM) | |
| 6. | 7X-2543 M | [1] | BOLT (M10X1.5X120-MM) | |
| 7. | 7X-2533 CM | [2] | BOLT (M6X1X35-MM) | |
| 8. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 10. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP54640227
297-4470: SENSOR & MTG GP-POSITION
297-4470 SENSOR & MTG GP-POSITION -STICK
S/N BZN1-UP
PART OF 330-8777 BOOM AR
Type 1
AN ATTACHMENT
S/N BZN1-UP
PART OF 330-8777 BOOM AR
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 315D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 169-0417 Y | [1] | SENSOR GP-POSITION (STICK) | |
| 2. | 309-5693 | [1] | LEVER AS | |
| 3. | 309-5694 | [1] | PLATE | |
| 4. | 309-5695 | [1] | ROD AS | |
| 8T-4133 M | [1] | NUT (M10X1.5-THD) | ||
| 9X-2065 M | [1] | NUT (M10X1.5-THD, LH) | ||
| 5. | 309-5733 | [1] | ROLLER | |
| 6. | 309-5734 | [1] | SPACER (10.8X17.3X12-MM THK) | |
| 7. | 131-3983 M | [4] | BOLT-SOCKET HEAD (M8X1.25X35-MM) | |
| 8. | 8T-1160 M | [1] | BOLT-SOCKET HEAD (M10X1.5X50-MM) | |
| 9. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 11. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 12. | 8T-4971 M | [2] | BOLT (M6X1X30-MM) | |
| 13. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP54640228
297-4470: SENSOR & MTG GP-POSITION
297-4470 SENSOR & MTG GP-POSITION -STICK
S/N BZN1-UP
PART OF 330-8777, 385-4132 BOOM AR
Type 2
AN ATTACHMENT
S/N BZN1-UP
PART OF 330-8777, 385-4132 BOOM AR
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 315D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 361-4360 CY | [1] | SENSOR GP-POSITION (ROTARY)(STICK) | |
| 2. | 309-5693 | [1] | LEVER AS | |
| 3. | 309-5694 | [1] | PLATE | |
| 4. | 309-5695 | [1] | ROD AS | |
| 8T-4133 M | [1] | NUT (M10X1.5-THD) | ||
| 9X-2065 M | [1] | NUT (M10X1.5-THD, LH) | ||
| 5. | 309-5733 | [1] | ROLLER | |
| 6. | 309-5734 | [1] | SPACER (10.8X17.3X12-MM THK) | |
| 7. | 131-3983 M | [4] | BOLT-SOCKET HEAD (M8X1.25X35-MM) | |
| 8. | 8T-1160 M | [1] | BOLT-SOCKET HEAD (M10X1.5X50-MM) | |
| 9. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 11. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 12. | 8T-4971 M | [2] | BOLT (M6X1X30-MM) | |
| 13. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP54640229
296-4802: SENSOR GP-ENGINE
296-4802 SENSOR GP-ENGINE
S/N JKH1-UP
PART OF 272-4817 ENGINE AR, 420-2181 ENGINE AR-CORE
S/N JKH1-UP
PART OF 272-4817 ENGINE AR, 420-2181 ENGINE AR-CORE
For full view, you need register
Parts for your 315D L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 238-0112 | [1] | SENSOR GP-TEMPERATURE (ENGINE COOLANT) | |
| 1A. | 238-0112 | [1] | SENSOR GP-TEMPERATURE (AIR INLET) | |
| 1B. | 238-0112 | [1] | SENSOR GP-TEMPERATURE (FUEL) | |
| 2. | 238-0118 | [1] | SENSOR GP-PRESSURE (FUEL MANIFOLD) | |
| 3. | 296-4631 | [1] | WASHER (6.06X9.5X1-MM THK) | |
| 4. | 274-6720 | [1] | SENSOR GP-PRESSURE (AIR INLET MANIFOLD) | |
| 5. | 274-6721 | [1] | SENSOR GP-PRESSURE (FUEL) | |
| 5A. | 274-6721 | [1] | SENSOR GP-PRESSURE (ENGINE OIL) | |
| 6. | 238-0120 | [1] | SENSOR GP-SPEED (ENGINE) | |
| 7. | 324-4131 | [1] | SENSOR GP-SPEED (ENGINE) | |
| 8. | 294-1804 | [5] | SEAL-O-RING | |
| 9. | 296-4633 | [1] | SEAL-O-RING | |
| 10. | 266-0136 | [1] | SENSOR GP-PRESSURE (FUEL) | |
| 9X-1813 E | SLEEVE (8-CM) | |||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 237-0228 | [1] | RECEPTACLE AS-CONNECTOR | ||
| 11. | 296-4621 | [2] | BOLT (M8X1.25-THD) | |
| E | ORDER BY THE CENTIMETER | |||
Information:
OPERATOR STATION
CONSOLE GP
Operation and Maintenance Manual
Special Instruction
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
Specifications
Caterpillar Parts SIS Catalog 315D L :
Truck sale:
34.204
Caterpillar 315DL, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler excavators
WILLIAM ADAMS PTY. LTD.
- Crawler excavators
WILLIAM ADAMS PTY. LTD.
89.750
Caterpillar 315DL, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler Excavators
CARTER MACHINERY COMPANY, INC.
- Crawler Excavators
CARTER MACHINERY COMPANY, INC.
