AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

482-2083 KIT-ENGINE OVERHAUL S/N SPN1-UP FIELD INSTALLATION 320D L EXCAVATOR


SERVICE EQUIPMENT AND SUPPLIES
KIT-REBUILD
BASIC ENGINE
MOUNTING GP-ALTERNATOR
MOUNTING GP-ENGINE
MOUNTING GP-STARTING MOTOR
PAN GP-OIL
PISTON & ROD GP
PULLEY GP

EXCAVATOR 320D L EXCAVATOR SPN
 320D L Excavator SPN00001-UP (MACHINE) POWERED BY C6.4 Engine SEBP5472 320D L SPN   (2009)

SERVICE EQUIPMENT AND SUPPLIES

KIT-REBUILD
482-2083 KIT-ENGINE OVERHAUL
420-3862 KIT-FUEL PRIMING PUMP
489-5119 KIT-LIGHTING
489-5106 KIT-WINDOW GUARD
 

#SEBP54720060
 

482-2083: KIT-ENGINE OVERHAUL

482-2083 KIT-ENGINE OVERHAUL
S/N SPN1-UP
FIELD INSTALLATION
i06301894 SEBP5472
  For full view, you need register

Parts for your 320D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  310-9553 Y [1] KIT-GASKET (UPPER)  
  310-9554 Y [1] KIT-GASKET (LOWER)  
  294-1748 [12] BEARING  
  094-7154 [12] BOLT (M12X1.25X85-MM)  
  5I-7528 [2] BUSHING  
  5I-7529 [1] BUSHING  
  5I-8009 [1] BUSHING  
  096-3741 [7] CAP  
  094-9424 [12] GASKET  
  305-4885 [24] GUIDE  
  094-7516 [12] NUT (M12X1.25-THD)  
  199-2188 [48] PIN-COTTER  
  183-5916 [6] PIN-SPRING  
  5I-7654 [3] PLATE (STANDARD)  
  5I-7525 [1] PLUG  
  199-2187 [24] RETAINER  
  5I-7667 [12] RING  
  287-0189 [1] SEAL  
  294-1720 [2] SEAL  
  294-1788 [6] SEAL  
  324-4223 [1] SEAL  
  5I-7660 [1] SEAL AS  
  199-2189 [24] SEAL-VALVE STEM  
  305-4883 [12] SEAT  
  305-4884 [12] SEAT  
  5I-7588 [7] SET-BEARING (STANDARD)  
  178-6543 [6] SET-PISTON RING (STANDARD)  
  5I-7523 [6] SLEEVE  
  5I-7540 [1] SLEEVE  
  294-1685 [12] VALVE-EXHAUST  
  294-1684 [12] VALVE-INLET  
  Y   SEPARATE ILLUSTRATION
 

#SEBP54720061
 

296-4661: MOUNTING GP-ALTERNATOR

296-4661 MOUNTING GP-ALTERNATOR
S/N GDC1-UP
PART OF 272-4747, 327-7199 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
i02618471 SEBP5472
2964661 MOUNTING GP-ALTERNATOR Parts scheme
  For full view, you need register

Parts for your 320D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 178-6600 [1] PULLER  
2. 294-1859 [1] PLATE  
3. 5I-7750 [2] WASHER (12.5X25X8-MM THK)  
4. 294-1860 [1] BOLT  
5. 5I-5597 [1] BOLT (M10X1.5-THD)  
6. 294-1861 M [2] BOLT (M12X1.75X30-MM)  
7. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
8. 178-6598 M [1] BOLT (M12X1.25X135-MM)  
9. 178-6599 [1] WASHER  
10. 178-6601 [1] RING  
11. 212-8561 Y [1] ALTERNATOR GP-CHARGING  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP54720062
 

266-6297: MOUNTING GP-ENGINE

266-6297 MOUNTING GP-ENGINE
S/N SPN1-UP
PART OF 287-0132 INSTALLATION AR-ENGINE
i02417345 SEBP5472
2666297 MOUNTING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 320D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 109-9329 [4] WASHER (21.5X120X8-MM THK)  
2. 118-9784 [2] BRACKET-REAR  
3. 118-9785 [2] BRACKET-FRONT  
4. 118-9930 [4] SUPPORT AS  
5. 266-6298 [2] MOUNT-RUBBER  
6. 266-6299 [2] MOUNT-RUBBER  
7. 266-6300 [2] MOUNT-RUBBER  
8. 266-6301 [2] MOUNT-RUBBER  
9. 447-1712 M [4] BOLT (M20X2.5X130-MM)  
10. 451-2176 [8] WASHER-HARD (22X35X3.5-MM THK)  
11. 451-2181 M [8] BOLT (M12X1.75X30-MM)  
12. 453-3447 M [8] BOLT (M12X1.75X40-MM)  
13. 451-2182 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
 

#SEBP54720063
 

296-4637: MOUNTING GP-STARTING MOTOR

296-4637 MOUNTING GP-STARTING MOTOR
S/N GDC1-UP
PART OF 272-4747, 327-7199 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
i02618404 SEBP5472
2964637 MOUNTING GP-STARTING MOTOR Parts scheme
  For full view, you need register

Parts for your 320D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-7599 [1] SEAL-O-RING  
2. 135-2369 [1] COVER  
3. 135-2370 M [1] BOLT (M5X0.8X25-MM)  
4. 294-1850 [1] WASHER  
5. 294-1851 [1] WASHER  
6. 272-4774 Y [1] STARTING MOTOR GP-ELECTRIC  
7. 6V-8231 M [2] NUT (M10X1.25-THD)  
8. 7X-0796 [2] LOCKWASHER (10.2X18.4X2.5-MM THK)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP54720064
 

296-4640: PAN GP-OIL

296-4640 PAN GP-OIL
S/N GDC1-UP
PART OF 272-4747, 327-7199 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
i02618429 SEBP5472
2964640 PAN GP-OIL Parts scheme
  For full view, you need register

Parts for your 320D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 294-1741 [1] GUIDE  
2. 196-8366 [37] BOLT  
3. 199-2178 [1] BOLT (M10X1.25X20-MM)  
4. 125-2968 [1] SEAL  
5. 5I-8067 [1] WASHER-SEALING  
6. 7W-3556 [1] WASHER (14.27X20.57X1.5-MM THK)  
7. 183-8177 [1] PLUG  
8. 183-8176 [1] VALVE (ENGINE OIL PAN)  
9. 294-1742 [1] PAN AS  
  287-0187 [1] BOSS  
  287-0188 [1] PLATE  
  287-0189 [1] SEAL  
  287-0190 [1] BOLT (M8X1.25X16-MM)  
10. 213-0677 [1] SWITCH AS-LIQUID LEVEL (ENGINE OIL)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
11. 294-1743 [1] GAUGE AS-OIL LEVEL (DIPSTICK) (ENGINE)  
12. 5I-4993 [1] SEAL  
13. 5I-7666 [1] GASKET  
14. 282-8567 [1] BOLT  
 

#SEBP54720065
 

327-7228: PAN GP-OIL

327-7228 PAN GP-OIL
S/N GDC1-UP
PART OF 327-7199 ENGINE AR-PRIMARY
AN ATTACHMENT
i03950552 SEBP5472
3277228 PAN GP-OIL Parts scheme
  For full view, you need register

Parts for your 320D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 327-7229 [1] GUIDE  
2. 196-8366 [37] BOLT  
3. 199-2178 [1] BOLT (M10X1.25X20-MM)  
4. 125-2968 [1] SEAL  
5. 5I-8067 [1] WASHER-SEALING  
6. 7W-3556 [1] WASHER (14.27X20.57X1.5-MM THK)  
7. 183-8177 [1] PLUG  
8. 183-8176 [1] VALVE  
9. 294-1742 [1] PAN AS  
  287-0187 [1] BOSS  
  287-0188 [1] PLATE  
  287-0189 [1] SEAL  
  287-0190 [4] BOLT (M8X1.25X16-MM)  
10. 213-0677 [1] SWITCH AS-LIQUID LEVEL  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  144-1636 [2] PIN-CONNECTOR (14-GA TO 18-GA)  
11. 327-7247 [1] GAUGE-OIL LEVEL (PAN)  
12. 5I-4993 [1] SEAL  
13. 5I-7666 [1] GASKET  
14. 282-8567 [1] BOLT  
 

#SEBP54720066
 

296-4659: PISTON & ROD GP

296-4659 PISTON & ROD GP
S/N GDC1-UP
PART OF 272-4747, 327-7199 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
i02618455 SEBP5472
2964659 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 320D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 324-4235 [6] PISTON (STANDARD)  
  324-4236 AB PISTON (0.25-MM OS)  
  324-4237 AB PISTON (0.5-MM OS)  
2. 094-7134 [6] PIN  
3. 5I-7667 [12] RING  
4. 178-6543 J [6] SET-PISTON RING (STANDARD)  
  178-6544 ABJ SET-PISTON RING (0.25-MM OS)  
  178-6545 ABJ SET-PISTON RING (0.5-MM OS)  
5. 294-1747 [6] ROD AS  
    (EACH INCLUDES)
5A. 094-7154 [2] BOLT (M12X1.25X85-MM)  
5B. 094-7516 [2] NUT (M12X1.25-THD)  
6. 294-1748 [12] BEARING (STANDARD)  
  297-7648 AB BEARING (0.25-MM US)  
  297-7649 AB BEARING (0.50-MM US)  
  297-7650 AB BEARING (0.75-MM US)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  J   INCLUDES A COMPLETE SET OF RINGS FOR ONE PISTON
 

#SEBP54720067
 

297-7747: PULLEY GP-ENGINE

297-7747 PULLEY GP-ENGINE
S/N SPN1-UP
PART OF 324-3966 ENGINE AR-COMPLETE
i03820564 SEBP5472
2977747 PULLEY GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 320D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 305-4908 Y [1] PULLEY GP-IDLER  
2. 297-7824 M [11] BOLT AS (M10X1.5X35MM)  
3. 7X-0796 [6] LOCKWASHER (10.2X18.4X2.5-MM THK)  
4. 266-6230 [1] SPACER-FAN  
5. 212-8593 [1] PLATE  
6. 266-6231 M [6] BOLT (M10X1.5X120-MM)  
7. 212-8584 [1] PULLEY  
8. 297-7825 [1] BELT-SERPENTINE  
9. 266-6228 [1] COVER  
10. 327-7221 [1] PULLEY AS  
  5I-7540 [1] SLEEVE  
11. 324-4107 C [1] BRACKET  
12. 255-2873 M [1] BOLT AS (M10X1.25X25MM)  
13. 266-6229 [1] PULLEY-FAN DRIVE  
14. 324-4103 C [2] BEARING  
15. 212-8596 [2] BUSHING  
16. 266-6232 [1] SPACER (31.1X38.1X28.4-MM THK)  
17. 255-2871 [1] WASHER (10.5X38X7-MM THK)  
18. 324-4102 C [1] PLATE  
19. 324-4106 C [1] PLATE  
20. 324-4122 CY [1] FAN GP-SUCTION  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP54720068
 

324-4200: PULLEY GP-ENGINE

324-4200 PULLEY GP-ENGINE
S/N SPN1-UP
PART OF 324-3978 ENGINE AR-COMPLETE
AN ATTACHMENT
i03662060 SEBP5472
3244200 PULLEY GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 320D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 212-8584 [1] PULLEY  
2. 324-4225 [1] PULLEY AS  
  5I-7540 [1] SLEEVE  
3. 305-4908 Y [1] PULLEY GP-IDLER  
4. 294-1781 [1] BELT-SERPENTINE  
5. 327-7230 Y [1] FAN GP-SUCTION  
6. 213-9433 M [4] BOLT (M10X1.5X45-MM)  
7. 327-7251 [1] BRACKET AS  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP54720069
 

327-7270: PULLEY GP-ENGINE

327-7270 PULLEY GP-ENGINE
S/N SPN1-UP
PART OF 327-7269, 428-8919 ENGINE AR-COMPLETE
AN ATTACHMENT
i04384256 SEBP5472
3277270 PULLEY GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 320D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 305-4908 Y [1] PULLEY GP-IDLER (BELT TENSIONING)  
2. 297-7824 M [11] BOLT AS  
3. 7X-0796 [6] LOCKWASHER (10.2X18.4X2.5-MM THK)  
4. 266-6230 [1] SPACER-FAN  
5. 212-8593 [1] PLATE  
6. 266-6231 M [6] BOLT (M10X1.5X120-MM)  
7. 212-8584 [1] PULLEY  
8. 212-8585 [1] BELT-SERPENTINE  
9. 266-6228 [1] COVER  
10. 436-1883 [1] PULLEY AS  
  5I-7540 [1] SLEEVE  
11. 324-4102 [1] PLATE  
12. 324-4122 Y [1] FAN GP-SUCTION  
13. 266-6229 [1] PULLEY-FAN DRIVE  
14. 324-4103 [2] BEARING  
15. 212-8596 [2] BUSHING  
16. 266-6232 [1] SPACER (31.1X38.1X28.4-MM THK)  
17. 255-2871 [1] WASHER (10.5X38X7-MM THK)  
18. 255-2873 M [1] BOLT AS  
19. 324-4106 [1] PLATE  
20. 324-4107 [1] BRACKET  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Reuse And Salvage Guidelines

Caterpillar Parts SIS Catalog 320D L :

HOUSING GP-FRONT
296-4649 HOUSING GP-FRONT
HOUSING GP-FLYWHEEL
296-4643 HOUSING GP-FLYWHEEL
GEAR GP-FRONT
296-4651 GEAR GP-FRONT
FLYWHEEL GP
296-4644 FLYWHEEL GP
CYLINDER HEAD GP
296-4645 CYLINDER HEAD GP
CYLINDER HEAD AS
297-7644 CYLINDER HEAD AS
CYLINDER BLOCK GP
296-4648 CYLINDER BLOCK GP
CYLINDER BLOCK GP
294-1725 CYLINDER BLOCK GP
MOUNTING GP-ALTERNATOR
296-4661 MOUNTING GP-ALTERNATOR
MOUNTING GP-ENGINE
266-6297 MOUNTING GP-ENGINE
MOUNTING GP-STARTING MOTOR
296-4637 MOUNTING GP-STARTING MOTOR
PAN GP-OIL
296-4640 PAN GP-OIL
PAN GP-OIL
327-7228 PAN GP-OIL
PISTON & ROD GP
296-4659 PISTON & ROD GP
PULLEY GP-ENGINE
297-7747 PULLEY GP-ENGINE
PULLEY GP-ENGINE
324-4200 PULLEY GP-ENGINE

Truck sale:

 
 
Caterpillar 320D L
- Crawler excavators
WHEELER MACHINERY CO.
Caterpillar 320DL, Raupenbagger, Bau-Und Bergbauausrüstung
29.801 
Caterpillar 320DL, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler excavators
CAVPOWER
Caterpillar 320DL
 
Caterpillar 320DL
- Crawler excavators
WAGNER EQUIPMENT CO
Caterpillar 320DL, Raupenbagger, Bau-Und Bergbauausrüstung
77.723 
Caterpillar 320DL, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler excavators
TOROMONT CAT
Caterpillar 320DL, Raupenbagger, Bau-Und Bergbauausrüstung
92.000 
Caterpillar 320DL, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler excavators
HOLT CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.