259-4949 WIRING GP-MEDIUM PRESSURE S/N MND1-UP; JAT1-UP PART OF 255-5833 CONTROL AR-AUXILIARY AN ATTACHMENT 324D L

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 259-4949 WIRING GP-
1. 336-5982 WIRING GP-
2. 336-6186 WIRING GP-
3. 336-6193 WIRING GP-
4. 350-8236 WIRING GP-
5. 336-6141 WIRING GP-
6. 238-1570 WIRING GP-
7. 342-3108 WIRING GP-

POWER TRAIN

DRIVE GP-FINAL

8. 267-6878 DRIVE GP-F
9. 267-6913 DRIVE GP-F
0. INFORMATION

EXCAVATOR 324D L EXCAVATOR JAT
324D & 324D L Excavators JAT00001-UP (MACHINE) POWERED BY C7 Engine SEBP5477 324D L JAT (2009)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

336-6225 WIRING GP-HAMMER

259-4949 WIRING GP-MEDIUM PRESSURE

336-5982 WIRING GP-PLATFORM

336-6186 WIRING GP-QUICK COUPLER

336-6193 WIRING GP-QUICK COUPLER

#SEBP54770300

259-4949: WIRING GP-MEDIUM PRESSURE

WIRING GP-MEDIUM PRESSURE

259-4949 WIRING GP-MEDIUM PRESSURE
S/N MND1-UP; JAT1-UP
PART OF 255-5833 CONTROL AR-AUXILIARY
AN ATTACHMENT

i02433640 SEBP5477

2594949 WIRING GP-MEDIUM PRESSURE Parts scheme

For full view, you need register

Parts for your 324D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[5]	STRAP-CABLE
2.	7K-1181	[5]	STRAP-CABLE
3.	102-7886	[1]	SPACER (11X20X80-MM THK)
4.	267-8019	[1]	HARNESS AS-VALVE
	3S-2093	[1]	STRAP-CABLE
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	243-4508	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
5.	132-5789	[1]	CLIP (LADDER)
6.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
7.	8T-4198 M	[1]	BOLT (M10X1.5X100-MM)
	M		METRIC PART

#SEBP54770301

336-5982: WIRING GP-PLATFORM

WIRING GP-PLATFORM

336-5982 WIRING GP-PLATFORM
S/N MND1-UP; JAT1-UP
PART OF 340-6485 OPERATOR AR

i03663940 SEBP5477

For full view, you need register

Parts for your 324D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1S-2342	[1]	STRAP AS-GROUND
2.	3E-5169	[1]	GUARD-SWITCH
3.	3S-2093	[7]	STRAP-CABLE
4.	7K-1181	[17]	STRAP-CABLE
5.	111-4836	[5]	CLIP
6.	111-4838	[2]	CLIP
7.	111-4839	[2]	STRAP
8.	116-0118	[14]	CLIP
9.	234-1122	[1]	COVER
10.	251-0299	[1]	HARNESS AS-SWITCH (SECONDARY SHUTDOWN)
	2L-8074	[2]	TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
11.	336-5966	[1]	HARNESS AS-PLATFORM
	102-8802	[5]	KIT-RECEPTACLE (2-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[13]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[26]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[21]	STRAP-CABLE
	8N-1546	[1]	PIN-CONNECTOR (6-GA)
	8T-8737	[54]	PLUG-SEAL
	102-7964	[1]	PLUG-CONNECTOR (16-PIN)
	102-7965	[13]	TERMINAL (FEMALE)
	9W-0852	[7]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[38]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	116-0255	[1]	TERMINAL-BLADE (10-GA TO 20-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	121-1039	[1]	TERMINAL (MALE)
	121-1168	[2]	CONNECTOR-RECEPTACLE
	121-1173	[33]	TERMINAL (MALE)
	125-4766	[1]	PLUG-CONNECTOR (17-PIN)
	125-4841	[1]	WEDGE-PLUG LOCK (21-PIN)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(35-CM)
	9X-3402	[66]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	127-5484	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	2L-8050	[1]	TERMINAL-RING (6-GA, 1/4-IN SCREW)
			-OR-
	2L-8058	[1]	TERMINAL-RING (8-GA, 1/4-IN SCREW)
	2L-8052	[2]	TERMINAL-RING (6-GA, 3/8-IN SCREW)
			-OR-
	2L-8060	[2]	TERMINAL-RING (8-GA, 3/8-IN SCREW)
	2L-8069	[2]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	134-3296	[1]	HOUSING-PLUG
	134-3297	[2]	SEAL
	9X-3401	[26]	PIN-CONNECTOR (16-GA TO 18-GA)
	153-2620	[1]	PLUG AS-CONNECTOR (54-PIN, BLACK)
	163-6759	[1]	SEAL
	155-2270	[9]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	197-4385	[2]	DIODE
	230-4009	[3]	PLUG AS-CONNECTOR (12-PIN)
			(EACH INCLUDES)
	264-7034	[1]	SEAL-CONNECTOR
	230-4011	[4]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	230-5010	[3]	PLUG AS-CONNECTOR (6-PIN)
			(EACH INCLUDES)
	264-7032	[1]	SEAL-CONNECTOR
	238-2363	[10]	TERMINAL (FEMALE)
	238-2366	[6]	TERMINAL (MALE)
	239-7352	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	243-4505	[2]	RECEPTACLE AS-CONNECTOR (2-PIN)
	243-4507	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
	243-4508	[4]	RECEPTACLE AS-CONNECTOR (6-PIN)
	243-4509	[1]	RECEPTACLE AS-CONNECTOR (8-PIN)
	243-4510	[2]	RECEPTACLE AS-CONNECTOR (12-PIN)
	247-2693	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
12.	096-6166	[2]	WASHER-HARD (4.5X9X1-MM THK)
13.	4D-1836	[1]	SWITCH-TOGGLE (SECONDARY SHUTDOWN)
14.	7X-2621 M	[7]	BOLT (M10X1.5X12-MM)
15.	8T-0337 M	[2]	SCREW-MACHINE (M4X0.7X12-MM)
16.	8T-4121	[15]	WASHER-HARD (11X21X2.5-MM THK)
17.	8T-4137 M	[8]	BOLT (M10X1.5X20-MM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP54770302

336-6186: WIRING GP-QUICK COUPLER

WIRING GP-QUICK COUPLER

336-6186 WIRING GP-QUICK COUPLER
S/N MND1-UP; JAT1-UP
PART OF 344-4118 CONTROL AR-COUPLER
AN ATTACHMENT

i03661340 SEBP5477

3366186 WIRING GP-QUICK COUPLER Parts scheme

For full view, you need register

Parts for your 324D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[7]	STRAP-CABLE
2.	7K-1181	[10]	STRAP-CABLE
3.	342-2993	[1]	HARNESS AS-SOLENOID (QUICK COUPLER)
	8T-8730	[1]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
	9W-0852	[1]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[1]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)

#SEBP54770303

336-6193: WIRING GP-QUICK COUPLER

WIRING GP-QUICK COUPLER

336-6193 WIRING GP-QUICK COUPLER
S/N MND1-UP; JAT1-UP
PART OF 344-4119 CONTROL AR-QUICK COUPLER
AN ATTACHMENT

i03661420 SEBP5477

3366193 WIRING GP-QUICK COUPLER Parts scheme

For full view, you need register

Parts for your 324D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[14]	STRAP-CABLE
2.	7K-1181	[9]	STRAP-CABLE
3.	342-3123	[1]	HARNESS AS-QUICK COUPLER
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[4]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[2]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	125-7874 BE		TUBE-HEAT SHRINK (5.72-MM DIA)
	2L-8069	[1]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
			(EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	243-4507	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
4.	4P-7581	[1]	CLIP (LADDER)
5.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
6.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP54770304

350-8236: WIRING GP-QUICK COUPLER

WIRING GP-QUICK COUPLER

350-8236 WIRING GP-QUICK COUPLER
S/N MND1-UP; JAT1-UP
PART OF 344-4454 CONTROL AR-COUPLER
AN ATTACHMENT

i03886130 SEBP5477

3508236 WIRING GP-QUICK COUPLER Parts scheme

For full view, you need register

Parts for your 324D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[10]	STRAP-CABLE
2.	7K-1181	[10]	STRAP-CABLE
3.	350-8237	[1]	HARNESS AS-SOLENOID (QUICK COUPLER)
	8T-8730	[1]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
	9W-0852	[1]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[1]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)

#SEBP54770305

336-6141: WIRING GP-RADIO

WIRING GP-RADIO

336-6141 WIRING GP-RADIO
S/N MND1-UP; JAT1-UP
12-VOLT
PART OF 346-4645, 359-2277 OPTION AR-CAB
AN ATTACHMENT

i03645896 SEBP5477

For full view, you need register

Parts for your 324D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[10]	STRAP-CABLE
2.	4I-7889	[1]	SPACER (11X25X45-MM THK)
3.	7K-1181	[10]	STRAP-CABLE
4.	116-0118	[1]	CLIP
5.	149-5050	[1]	RELAY (24-VOLT)(SPEAKERS RH POSITIVE)
5A.	149-5050	[1]	RELAY (24-VOLT)(SPEAKERS RH NEGATIVE)
5B.	149-5050	[1]	RELAY (24-VOLT)(SPEAKERS LH POSITIVE)
5C.	149-5050	[1]	RELAY (24-VOLT)(SPEAKERS LH NEGATIVE)
6.	170-2512 Y	[1]	SWITCH GP-TOGGLE (SPEAKER)
7.	267-7676	[1]	BRACKET AS
8.	267-7695	[1]	BRACKET AS
9.	283-2984	[1]	COVER
10.	342-2962	[1]	HARNESS AS-RADIO
	8T-8729	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[21]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[26]	STRAP-CABLE
	8T-8737	[9]	PLUG-SEAL
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[6]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	149-5051	[4]	CONNECTOR-RECEPTACLE
	149-5069	[8]	TERMINAL-BLADE (14-GA TO 20-GA)
	149-5070	[12]	TERMINAL-BLADE (16-GA TO 20-GA)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	231-2295	[2]	PLUG AS-CONNECTOR (8-PIN)
			(EACH INCLUDES)
	264-7033	[1]	SEAL-CONNECTOR
	243-4509	[2]	RECEPTACLE AS-CONNECTOR (8-PIN)
11.	324-5770	[1]	CONVERTER-POWER (24-VOLT TO 12-VOLT)
12.	8T-4171 M	[4]	BOLT (M6X1X12-MM)
13.	8T-5005 M	[1]	BOLT (M10X1.5X70-MM)
14.	9X-2042 M	[7]	SCREW-TRUSS HEAD (M6X1X12-MM)
15.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP54770306

238-1570: WIRING GP-REFUELING PUMP

WIRING GP-REFUELING PUMP

238-1570 WIRING GP-REFUELING PUMP
S/N MND1-UP; JAT1-UP
PART OF 229-1784 PUMP AR-FUEL TRANSFER
AN ATTACHMENT

i03087780 SEBP5477

2381570 WIRING GP-REFUELING PUMP Parts scheme

For full view, you need register

Parts for your 324D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[16]	STRAP-CABLE
2.	9X-3495	[1]	CLIP AS
3.	149-5050	[1]	RELAY (24-VOLT)(REFUELING PUMP, STOP)
3A.	149-5050	[1]	RELAY (24-VOLT)(REFUELING PUMP, START)
4.	213-0772	[1]	SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)
5.	238-1579	[1]	HARNESS AS-PUMP (REFUELING)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[3]	STRAP-CABLE
	8T-8737	[1]	PLUG-SEAL
	116-0126	[1]	HOUSING-PLUG
	116-0128	[2]	SEAL
	116-0255	[2]	TERMINAL-BLADE (10-GA TO 20-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	121-1038	[1]	HOUSING-RECEPTACLE
	121-1039	[2]	TERMINAL (MALE)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	2L-8065	[1]	TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)
	2L-8067	[2]	TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)
	2L-8075	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
	149-5051	[2]	CONNECTOR-RECEPTACLE
	149-5069	[4]	TERMINAL-BLADE (14-GA TO 20-GA)
	149-5070	[4]	TERMINAL-BLADE (16-GA TO 20-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	197-4385	[1]	DIODE
	230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
6.	319-1335 C	[1]	HARNESS AS-WIRING
	8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
7.	238-1594 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)
8.	238-1596 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)
9.	096-2591 M	[2]	SCREW-MACHINE (M5X0.8X35-MM)
10.	7X-2619 M	[2]	BOLT (M6X1X10-MM)
11.	8T-0328 C	[2]	WASHER-HARD (5.5X10X1-MM THK)
12.	8T-4199 M	[1]	BOLT (M8X1.25X12-MM)
13.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
14.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
15.	275-6993	[1]	COVER
16.	7K-1181 C	[11]	STRAP-CABLE
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP54770307

342-3108: WIRING GP-WINDOW WIPER

WIRING GP-WINDOW WIPER

342-3108 WIRING GP-WINDOW WIPER
S/N MND1-UP; JAT1-UP
AN ATTACHMENT

i03661330 SEBP5477

3423108 WIRING GP-WINDOW WIPER Parts scheme

For full view, you need register

Parts for your 324D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[14]	STRAP-CABLE
2.	342-3109	[1]	HARNESS AS-WINDOW WIPER
	3S-2093	[6]	STRAP-CABLE
	102-7965	[12]	TERMINAL (FEMALE)
	9W-0844	[4]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	111-4816	[1]	PLUG-CONNECTOR (13-PIN)
	121-1173	[8]	TERMINAL (MALE)
	125-4840	[1]	WEDGE-PLUG LOCK (13-PIN)
	230-5008	[1]	PLUG AS-CONNECTOR (4-PIN)
	264-7031	[1]	SEAL-CONNECTOR

#SEBP54770308

267-6878: DRIVE GP-FINAL

DRIVE GP-FINAL

267-6878 DRIVE GP-FINAL -WITHOUT MOTOR
S/N MND1-UP; JAT1-UP
PART OF 267-6913, 333-2976 DRIVE GP-FINAL
ALSO AN ATTACHMENT

i02895208 SEBP5477

For full view, you need register

Parts for your 324D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-2338	[2]	PLUG-PIPE
2.	7Y-0752 BJ	[1]	SHIM (0.8-MM THK)
3.	7Y-0753 BJ	[1]	SHIM (1-MM THK)
4.	7Y-0754 BJ	[1]	SHIM (1.6-MM THK)
5.	094-0578 B	[1]	PLATE (8-MM THK)
6.	094-0579 B	[1]	PLATE (9-MM THK)
7.	094-0580 B	[1]	PLATE (10-MM THK)
8.	094-1528	[12]	WASHER (53X84X1-MM THK)
9.	114-1540 J	[4]	PIN-DOWEL
10.	168-8452 J	[2]	BALL BEARING
11.	169-5589	[1]	GEAR-SUN (24-TEETH)
12.	169-5590	[1]	GEAR-SUN (24-TEETH)
13.	169-5592	[3]	GEAR-PLANETARY (23-TEETH)
14.	169-5593	[3]	GEAR-PLANETARY (23-TEETH)
15.	169-5594	[1]	GEAR-RING (65-TEETH)
16.	169-5601	[3]	SHAFT-PLANETARY
17.	169-5602	[3]	SHAFT-PLANETARY
18.	171-9297	[6]	WASHER (34.3X62X1-MM THK)
19.	191-2569	[3]	BEARING AS (CAGED ROLLER)
20.	191-2570	[6]	BEARING AS (CAGED ROLLER)
21.	191-2571	[1]	CARRIER-PLANETARY
22.	191-2674	[1]	GEAR-SUN (25-TEETH)
23.	191-2675	[3]	GEAR-PLANETARY (20-TEETH)
24.	191-2676	[1]	GEAR-RING (72-TEETH)
25.	191-2677	[3]	BEARING AS (CAGED ROLLER)
26.	191-2678	[1]	CARRIER AS
27.	199-4503	[1]	COVER
28.	207-1571 J	[1]	SEAL GP-DUO-CONE
	214-3570	[2]	RING-TORIC
29.	267-6797 J	[1]	HOUSING-MOTOR
30.	267-6799	[1]	CARRIER-PLANETARY
31.	267-6800 J	[1]	GEAR-COUPLING
32.	267-6863 BJ	[1]	SHIM (0.75-MM THK)
33.	267-6864 BJ	[1]	SHIM (0.85-MM THK)
34.	267-6865 BJ	[1]	SHIM (0.9-MM THK)
35.	267-6866 BJ	[1]	SHIM (0.95-MM THK)
36.	267-6867 BJ	[1]	SHIM (1.2-MM THK)
37.	267-6868 BJ	[1]	SHIM (1.4-MM THK)
38.	267-6869 BJ	[1]	SHIM (1.8-MM THK)
39.	267-6870 BJ	[1]	SHIM (2-MM THK)
40.	267-6871 BJ	[1]	SHIM (2.3-MM THK)
41.	267-6879 J	[1]	HOUSING (SPROCKET)
42.	093-1731	[2]	RING-RETAINING
43.	095-0891	[6]	PIN-SPRING
44.	096-0433	[3]	RING-RETAINING
45.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)
46.	171-9298	[1]	SEAL-O-RING
47.	179-8733 M	[16]	BOLT (M20X2.5X170-MM)
48.	7M-8485	[2]	SEAL-O-RING
49.	7Y-0595	[3]	SPACER (58X79.6X6-MM THK)
50.	7Y-5217 JM	[16]	BOLT-SOCKET HEAD (M20X2.5X70-MM)
51.	8T-3282 J	[16]	WASHER-HARD (22X35X3.5-MM THK)
52.	8T-4123	[16]	WASHER (3.62X5.75X0.375-MM THK)
53.	9X-6032 M	[12]	BOLT-SOCKET HEAD (M10X1.5X30-MM)
54.	1U-8846 B		SEALANT-GASKET

			AVAILABLE REPAIR KIT(S):
	267-6885 J	[1]	KIT-FINAL DRIVE (HOUSING)
	B		USE AS REQUIRED
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

#SEBP54770309

267-6913: DRIVE GP-FINAL

DRIVE GP-FINAL

267-6913 DRIVE GP-FINAL -WITH MOTOR
S/N MND1-164; JAT1-254
PART OF 353-0513 DRIVE GP-FINAL, 199-4593 POWER TRAIN AR

i02895204 SEBP5477

For full view, you need register

Parts for your 324D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	215-9982 Y	[1]	MOTOR & MTG GP-TRAVEL
2.	267-6878 Y	[1]	DRIVE GP-FINAL
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Battery Disconnect Switch
324D and 326D Excavators

Battery or Battery Cable - Inspect/Replace
324D and 326D Excavators

Battery - Recycle
324D and 326D Excavators

Power Receptacle - If Equipped
324D and 326D Excavators

Fuses - Replace
324D and 326D Excavators

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}
Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}

Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}

Installation Procedure of 328-0393 Auxiliary Control Wiring Gp on Certain Excavators{1408}
Installation Procedure of 328-0393 Auxiliary Control Wiring Gp on Certain Excavators{1408}

Installation of the 251-0437 Auxiliary Control Wiring Gp {1408}
Installation of the 251-0437 Auxiliary Control Wiring Gp {1408}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}

Technical Information Bulletin

Wrong Resistor May be Installed into <NOBR>176-9668</NOBR> Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Relays
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Senders
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Sensors
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Switches
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Switches
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Sensors
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
C7 Engines for Caterpillar Built Machines

Electrical Connector - Inspect
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Open Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Short Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

System Schematic
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Overload Warning - Set - If Equipped
324D and 326D Excavators Hydraulic System

System Schematic
Machine Security System (MSS3i) Integrated

Troubleshooting

Electrical Connectors - Inspect
C7 and C9 Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0164 FMI 03 Injector Actuation Pressure voltage high
C7 and C9 Engines for Caterpillar Built Machines

CID 0091 FMI 08 Throttle Position signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C7 and C9 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0164 FMI 04 Injector Actuation Pressure voltage low
C7 and C9 Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

Fuel Filter Differential Pressure Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Engine Wiring Information
C7 and C9 Engines for Caterpillar Built Machines

CID 2417 FMI 05 Ether Injection Control Solenoid current low
C7 and C9 Engines for Caterpillar Built Machines

CID 2417 FMI 06 Ether Injection Control Solenoid current high
C7 and C9 Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C7 and C9 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C7 and C9 Engines for Caterpillar Built Machines

Air Inlet Heater Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

MID 039 - CID 0096 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0096 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 12
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0588 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 08
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2280 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C7 and C9 Engines for Caterpillar Built Machines

Throttle Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Low Engine Oil Pressure Lamp Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Electrical Component and Connector Locations
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2300 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0600 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CID 0190 FMI 08 Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C7 and C9 Engines for Caterpillar Built Machines

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Improvements to the Fuel Sender Group {1273, 1408, 6201, 7481, 7857}
2010/10/25

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12

Improvement Made to the Harness in the Right-Hand Side Cab Console for Certain Excavators {1408}
2010/04/22

A Troubleshooting Procedure is Available for the Operation Check Relay on Certain Excavators {1408, 7301}
2010/07/28

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

A New Console Harness Assembly Is Available for Certain Excavators {1408}
2012/07/04

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21