263-1850 DAMPER & PULLEY GP S/N C7C427-UP; KHX16210-UP PART OF 263-2004, 349-3581 ENGINE AR-COMPLETE 324D L

Pos.	Part No	Qty	Parts name
1.	2W-7381	[1]	PLATE-CLAMP
2.	116-6332	[1]	SPACER-SPECIAL
3.	167-8121	[1]	DAMPER AS
4.	228-3621	[1]	SPACER (101.5X167X8-MM THK)
5.	153-1036 C	[1]	PULLEY-CRANKSHAFT
6.	8T-3666 M	[4]	BOLT (M14X2X60-MM)
7.	8T-5035 M	[8]	BOLT (M10X1.5X65-MM)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP54890061

177-6973: DRIVE GP-FAN

DRIVE GP-FAN

177-6973 DRIVE GP-FAN
S/N C7C427-UP; KHX16210-UP
PART OF 253-0437 BRACKET GP-ENGINE

i01496451 SEBP5489

For full view, you need register

Parts for your 324D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	4W-1203	[2]	CUP-BEARING
2.	4W-1204	[2]	CONE-BEARING
3.	4W-2042	[1]	SPACER (35.3X45.5X38.331-MM THK)
4.	6V-9748	[1]	SEAL-LIP TYPE
5.	7C-8369	[1]	HUB
6.	7C-8370	[1]	CAP-DUST
7.	7C-8634	[1]	PLATE
8.	183-2854	[1]	BRACKET AS
9.	5S-9062	[1]	SPACER (35.032X50.8X15.88-MM THK)
10.	6V-8004 M	[1]	BOLT (M12X1.75X120-MM)
	M		METRIC PART

#SEBP54890062

258-8723: FASTENER GP-CYLINDER HEAD

FASTENER GP-CYLINDER HEAD

258-8723 FASTENER GP-CYLINDER HEAD -VALVE COVER BASE
S/N C7C427-UP; KHX16210-UP
PART OF 263-2004, 349-3581 ENGINE AR-COMPLETE

i02242179 SEBP5489

2588723 FASTENER GP-CYLINDER HEAD Parts scheme

For full view, you need register

Parts for your 324D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	229-8844	[3]	CLIP
2.	244-4500	[11]	SPRING
3.	8T-0100 M	[11]	BOLT (M8X1.25X60-MM)
4.	9N-0869	[11]	WASHER-HARD (8.8X25.5X2-MM THK)
	M		METRIC PART

#SEBP54890063

252-9551: FASTENER GP-FRONT COVER

FASTENER GP-FRONT COVER

252-9551 FASTENER GP-FRONT COVER
S/N C7C427-UP; KHX16210-UP
PART OF 263-2004, 349-3581 ENGINE AR-COMPLETE

i02296442 SEBP5489

2529551 FASTENER GP-FRONT COVER Parts scheme

For full view, you need register

Parts for your 324D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	9X-2098 M	[1]	STUD-TAPERLOCK (BOLT)
2.	6V-2317 M	[12]	BOLT (M8X1.25X30-MM)
3.	8T-0100 M	[2]	BOLT (M8X1.25X60-MM)
4.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART

#SEBP54890064

116-4556: FASTENER GP-FRONT HOUSING

FASTENER GP-FRONT HOUSING

116-4556 FASTENER GP-FRONT HOUSING
S/N C7C427-UP; KHX16210-UP
PART OF 263-2004, 349-3581 ENGINE AR-COMPLETE
CANNOT BE USED WITH FRONT ENGINE SUPPORT

i00483857 SEBP5489

1164556 FASTENER GP-FRONT HOUSING Parts scheme

For full view, you need register

Parts for your 324D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	6V-8336 M	[6]	BOLT (M12X1.75X70-MM)
	5P-8245	[6]	WASHER-HARD (13.5X25.5X3-MM THK)
	M		METRIC PART

#SEBP54890065

113-6170: FASTENER GP-LIFTING

FASTENER GP-LIFTING

113-6170 FASTENER GP-LIFTING
S/N C7C427-UP; KHX16210-UP
REAR
PART OF 263-2004, 349-3581 ENGINE AR-COMPLETE

i00997369 SEBP5489

1136170 FASTENER GP-LIFTING Parts scheme

For full view, you need register

Parts for your 324D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
2.	6V-4248 M	[3]	BOLT (M10X1.5X25-MM)
	M		METRIC PART

#SEBP54890066

186-5892: FLYWHEEL GP

FLYWHEEL GP

186-5892 FLYWHEEL GP
S/N C7C427-UP; KHX16210-UP
FITS 10 INCH OR 11.5 INCH OVER THE CENTER CLUTCH
PART OF 263-2004, 349-3581 ENGINE AR-COMPLETE
FOR USE WITH SAE NO. 3 FLYWHEEL HOUSING
CANNOT BE USED WITH FLYWHEEL STUB SHAFT

i01564247 SEBP5489

For full view, you need register

Parts for your 324D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	202-2382	[1]	FLYWHEEL AS
1A.	1W-1064	[1]	GEAR-FLYWHEEL RING (126-TEETH)
2.	6V-8197 M	[8]	BOLT (M12X1.75X40-MM)
3.	5P-8245	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
4.	3E-3213	[1]	PIN-SPRING
	M		METRIC PART

#SEBP54890067

205-1321: GEAR GP-FRONT

GEAR GP-FRONT

205-1321 GEAR GP-FRONT
S/N C7C427-UP; KHX16210-UP
PART OF 236-4284 ENGINE AR-CORE

i01686025 SEBP5489

For full view, you need register

Parts for your 324D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	113-6069	[1]	PLATE-THRUST
2.	115-4219	[1]	PLATE-RETAINING
3.	200-4495	[1]	SHAFT-IDLER
4.	205-1320	[1]	GEAR AS-IDLER (50-TEETH)
4A.	115-4072	[1]	BEARING
5.	136-4183 M	[1]	BOLT-12 POINT HEAD (M10X1.5X30-MM)
6.	6V-5843 M	[2]	BOLT (M10X1.5X45-MM)
	M		METRIC PART

#SEBP54890068

7W-8813: HOUSING GP-FLYWHEEL

HOUSING GP-FLYWHEEL

7W-8813 HOUSING GP-FLYWHEEL
S/N C7C427-UP; KHX16210-UP
SAE NO. 3. PROVIDES STARTING MOTOR MOUNTING FLANGE ON RH SIDE
PART OF 263-2004, 349-3581 ENGINE AR-COMPLETE

i00417846 SEBP5489

For full view, you need register

Parts for your 324D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	7C-5233	[1]	HOUSING-FLYWHEEL
2.	2P-1294	[1]	PLUG-SEAL
3.	6V-5842 M	[2]	BOLT (M10X1.5X40-MM)
4.	7X-3347 M	[10]	BOLT-LOCKING (M14X2X45-MM)
5.	9S-4182	[1]	PLUG (7/16-20-THD)
6.	9S-4183 CB	[1]	PLUG (1-1/16-12-THD)(DRAIN)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP54890069

245-3260: HOUSING GP-FRONT

HOUSING GP-FRONT

245-3260 HOUSING GP-FRONT
S/N C7C427-UP; KHX16210-UP
PART OF 236-4284 ENGINE AR-CORE

i02297319 SEBP5489

For full view, you need register

Parts for your 324D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	245-3259	[1]	HOUSING-FRONT
2.	6V-3918 M	[4]	BOLT (M8X1.25X50-MM)
3.	6V-5217 M	[8]	BOLT (M8X1.25X20-MM)
4.	9M-1974	[12]	WASHER-HARD (8.8X16X2-MM THK)
5.	1U-8846 B		SEALANT-GASKET
	B		USE AS REQUIRED
	M		METRIC PART

Information:

BASIC ENGINE

DAMPER GP

Reuse And Salvage Guidelines

Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}

Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}

Testing and Adjusting

Vibration Damper - Check
C7 Engines for Caterpillar Built Machines

Disassembly and Assembly

Vibration Damper and Pulley - Remove and Install
C7
Engines for Caterpillar Built Machines

Crankshaft Vibration Damper and Pulley - Remove and Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit C7 Engine Supplement