AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

289-7957 CYLINDER GP-BOOM S/N TRH1-UP; BTK1-UP 135-MM (5.3-IN) BORE X 1305-MM (51.4-IN) STROKE PART OF 289-7956 CYLINDER & SEAL GP-BOOM AN ATTACHMENT 324D L


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP
FILTER GP

EXCAVATOR 324D L EXCAVATOR BTK
 324D L & 324D LN Excavators BTK00001-UP (MACHINE) POWERED BY C7 Engine SEBP5489 324D L BTK   (2009)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER & SEAL GP-BUCKET
289-8011 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-STICK
289-7966 CYLINDER & SEAL GP-STICK
CYLINDER GP-BOOM
289-7957 CYLINDER GP-BOOM
CYLINDER GP-BUCKET
289-7975 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
315-4451 CYLINDER GP-BUCKET
CYLINDER GP-COUPLER
169-0753 CYLINDER GP-COUPLER
 

#SEBP54890440
 

289-7957: CYLINDER GP-BOOM

289-7957 CYLINDER GP-BOOM
S/N TRH1-UP; BTK1-UP
135-MM (5.3-IN) BORE X 1305-MM (51.4-IN) STROKE
PART OF 289-7956 CYLINDER & SEAL GP-BOOM
AN ATTACHMENT
i03007288 SEBP5489
2897957 CYLINDER GP-BOOM Parts scheme
  For full view, you need register

Parts for your 324D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-4622 [1] LOCKNUT (SPECIAL)  
2. 372-2152 J [1] SEAL-U-CUP  
3. 234-4482 [1] PISTON  
4. 234-4483 J [2] RING  
5. 234-4485 J [1] RING  
6. 234-4486 [1] HEAD  
7. 234-4487 J [1] RING-BACKUP  
8. 237-1934 J [1] SEAL AS  
9. 247-8829 J [1] RING-SEAL  
10. 289-7958 [1] CYLINDER AS-HYDRAULIC  
10A. 290-9181 [1] BUSHING  
11. 289-7963 [1] ROD AS  
11A. 290-9181 [1] BUSHING  
12. 128-9260 [1] BUSHING  
13. 165-9288 J [1] SEAL-LIP TYPE  
14. 372-2151 J [1] SEAL-BUFFER  
15. 7Y-4628 J [1] RING (BACKUP)  
16. 7Y-4631 [1] RING-RETAINING  
17. 087-5005 [1] STOP  
18. 096-5382 J [1] SEAL-O-RING  
19. 7Y-5216 M [8] BOLT-SOCKET HEAD (M20X2.5X80-MM)  
   
    AVAILABLE REPAIR KIT(S):
  397-9295 J [1] KIT-SEAL (BOOM)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP54890441
 

289-7975: CYLINDER GP-BUCKET

289-7975 CYLINDER GP-BUCKET
S/N TRH1-UP; BTK1-UP
130-MM (5.1-IN) BORE X 1156-MM (45.5-IN) STROKE
PART OF 289-7974 CYLINDER & SEAL GP-BUCKET
AN ATTACHMENT
i03008754 SEBP5489
2897975 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 324D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-4622 [1] LOCKNUT (SPECIAL)  
2. 495-8200 J [1] RING AS-SEAL  
3. 093-1571 [1] RING-RETAINING  
4. 096-1588 J [1] RING-BACKUP  
5. 150-5884 J [1] RING  
6. 165-9287 J [1] SEAL-LIP TYPE  
7. 179-9770 [1] PISTON  
8. 377-6020 J [1] SEAL-BUFFER  
9. 247-8812 [1] ROD AS  
9A. 240-2914 [1] BUSHING  
10. 289-7976 [1] CYLINDER AS-HYDRAULIC  
10A. 235-7769 [1] BUSHING  
    -OR-
  284-7313 [1] BUSHING  
11. 7I-1353 [1] HEAD  
12. 377-6017 J [1] SEAL-U-CUP  
13. 179-9771 J [2] RING  
14. 095-1631 J [1] SEAL-O-RING  
15. 114-0758 [1] BUSHING  
16. 7Y-4633 J [1] RING-BACKUP  
17. 7Y-5216 M [8] BOLT-SOCKET HEAD (M20X2.5X80-MM)  
   
    AVAILABLE REPAIR KIT(S):
  398-1901 J [1] KIT-SEAL (BUCKET CYLINDER)  
    (ALSO INCLUDES SEAL RING)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP54890442
 

315-4451: CYLINDER GP-BUCKET

315-4451 CYLINDER GP-BUCKET
S/N TRH1-UP; BTK1-UP
150-MM (5.9-IN) BORE X 1151-MM (45.3-IN) STROKE
PART OF 289-8011 CYLINDER & SEAL GP-BUCKET
AN ATTACHMENT
i03006882 SEBP5489
3154451 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 324D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 358-8524 [1] HEAD  
2. 7Y-4669 J [1] RING-BACKUP  
3. 7Y-4695 M [1] LOCKNUT (M80X2-THD)  
4. 9X-3601 J [1] SEAL AS  
5. 324-6438 J [1] SEAL-BUFFER  
6. 188-4216 [1] PISTON  
7. 188-4218 J [1] RING  
8. 242-6787 [1] ROD AS  
8A. 228-5617 [1] BUSHING  
9. 315-4452 [1] CYLINDER AS  
9A. 235-7770 [1] BUSHING  
10. 7Y-4672 [1] RING-RETAINING  
11. 165-9290 J [1] SEAL-LIP TYPE  
12. 324-6439 J [1] SEAL-U-CUP  
13. 188-4217 J [2] RING  
14. 095-1633 J [1] SEAL-O-RING  
15. 114-0760 [1] BUSHING  
16. 7Y-4673 J [1] RING-BACKUP  
17. 7Y-5215 M [8] BOLT-SOCKET HEAD (M24X3X90-MM)  
   
    AVAILABLE REPAIR KIT(S):
  376-4331 J [1] KIT-SEAL (BUCKET CYLINDER)  
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  M   METRIC PART
 

#SEBP54890443
 

169-0753: CYLINDER GP-COUPLER

169-0753 CYLINDER GP-COUPLER -LOCK
S/N TRH1-UP; BTK1-UP
70-MM (2.8-IN) BORE X 130-MM (5.1-IN) STROKE
PART OF 169-0751 LOCK GP-QUICK COUPLER
AN ATTACHMENT
i03646942 SEBP5489
1690753 CYLINDER GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 324D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 169-3923 [1] KIT-VALVE (QUICK COUPLER)  
   
    AVAILABLE REPAIR KIT(S):
  219-1322 [1] KIT-SEAL (QUICK COUPLER LOCK CYLINDER)  
 

#SEBP54890444
 

289-7967: CYLINDER GP-STICK

289-7967 CYLINDER GP-STICK
S/N TRH1-UP; BTK1-UP
140-MM (5.5-IN) BORE X 1660-MM (65.4-IN) STROKE
PART OF 289-7966 CYLINDER & SEAL GP-STICK
AN ATTACHMENT
i03007287 SEBP5489
2897967 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 324D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 087-5434 [1] HEAD  
2. 123-2060 M [1] LOCKNUT (M80X2-THD)  
3. 158-9064 [1] PISTON  
4. 158-9065 J [2] RING  
5. 179-9667 J [1] RING  
6. 377-6019 J [1] SEAL-U-CUP  
7. 247-8791 J [1] RING-SEAL  
8. 289-7968 [1] CYLINDER AS-HYDRAULIC  
8A. 241-7381 [1] BUSHING  
9. 289-7971 [1] ROD AS  
9A. 241-7381 [1] BUSHING  
10. 377-6022 J [1] SEAL-BUFFER  
11. 087-5431 [1] STOP  
12. 087-5436 J [1] RING-BACKUP  
13. 093-1572 [1] RING-RETAINING  
14. 095-0929 [2] RING-RETAINING  
15. 095-1632 J [1] SEAL-O-RING  
16. 096-2665 J [1] RING-BACKUP  
17. 103-8378 [1] RING-RETAINING  
18. 103-8379 [1] RING  
19. 103-8380 [1] STOP  
20. 114-0757 [1] BUSHING  
21. 165-9289 J [1] SEAL-LIP TYPE  
22. 7Y-5215 M [8] BOLT-SOCKET HEAD (M24X3X90-MM)  
23. 9X-3598 J [1] SEAL AS  
   
    AVAILABLE REPAIR KIT(S):
  398-1893 J [1] KIT-SEAL (STICK CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP54890445
 

191-2692: DRIVE GP-SWING

191-2692 DRIVE GP-SWING -WITH MOTOR
S/N TRH1-UP; BTK1-UP
PART OF 199-4593 POWER TRAIN AR
i01674385 SEBP5489
1912692 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 324D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 191-2693 Y [1] DRIVE GP-SWING (WITHOUT MOTOR)  
2. 177-2458 Y [1] MOTOR & MTG GP-SWING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP54890446
 

191-2693: DRIVE GP-SWING

191-2693 DRIVE GP-SWING -WITHOUT MOTOR
S/N TRH1-UP; BTK1-UP
PART OF 191-2692 DRIVE GP-SWING
i01483666 SEBP5489
1912693 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 324D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-7466 [4] GEAR-PLANETARY (23-TEETH)  
2. 227-6221 [1] BREATHER AS (SWING DRIVE)  
2A. 4H-6112 [1] BREATHER (SWING DRIVE)  
2B. 227-6215 [1] BOSS (1/4-18-THD)  
2C. 267-6785 [1] PIPE  
3. 6V-7238 [1] VALVE-SHUTOFF  
4. 7I-7728 [1] CARRIER-PLANETARY  
5. 7Y-0225 [3] SHAFT-PLANETARY  
6. 7Y-1434 [2] SPACER (40X69.5X6-MM THK)  
7. 093-1730 [2] RING-RETAINING  
8. 093-1731 [1] RING-RETAINING  
9. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
10. 094-1528 [8] WASHER (53X84X1-MM THK)  
11. 136-2940 [1] BEARING  
12. 096-2653 [1] RING-RETAINING  
13. 136-2904 [1] BEARING  
14. 114-1383 [4] SHAFT-PLANETARY  
15. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
16. 114-1399 [1] PIPE-GAUGE  
17. 114-1401 [1] COVER-HOUSING  
18. 191-2696 [1] CAGE  
19. 135-9044 [2] SEAL-LIP TYPE  
20. 169-5617 [1] GEAR-SUN (18-TEETH)  
21. 169-5618 [3] GEAR-PLANETARY (27-TEETH)  
22. 191-2579 [1] CARRIER-PLANETARY  
23. 171-9280 [1] GEAR-RING (72-TEETH)  
24. 191-2694 [1] SHAFT-PINION  
25. 191-2695 [1] HOUSING  
26. 171-9283 [1] GEAR-SUN (24-TEETH)  
27. 171-9375 [1] SEAL-O-RING  
28. 191-2697 [1] SPACER (110X140X90.1-MM THK)  
29. 509-6676 [7] PIN-SPRING  
30. 3K-0360 [1] SEAL-O-RING  
31. 8J-8879 [1] SEAL-O-RING  
32. 7Y-0252 [3] BEARING AS-ROLLER  
33. 191-2513 [8] BEARING AS-ROLLER  
34. 453-3447 M [8] BOLT (M12X1.75X40-MM)  
35. 451-2182 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
36. 453-2843 M [16] BOLT (M16X2X180-MM)  
37. 451-2175 [16] WASHER-HARD (17.5X30X3.5-MM THK)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP54890447
 

418-7154: DRIVE GP-SWING

418-7154 DRIVE GP-SWING -WITHOUT MOTOR
S/N TRH1-UP; BTK1-UP
AN ATTACHMENT
i06708825 SEBP5489
4187154 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 324D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-7238 [1] VALVE-SHUTOFF (HYDRAULIC OIL)  
2. 094-0611 [14] WASHER (47.3X76X1-MM THK)  
3. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
4. 114-1399 [1] PIPE-GAUGE  
5. 191-2694 [1] SHAFT-PINION  
6. 191-2696 [1] CAGE  
7. 227-6221 [1] BREATHER AS (SWING DRIVE)  
  4H-6112 [1] BREATHER (SWING DRIVE)  
  227-6215 [1] BOSS (1/4-18-THD)  
  267-6785 [1] PIPE  
8. 296-6268 [3] BEARING AS-ROLLER  
9. 418-7160 [1] GEAR-SUN (13-TEETH, 18-TEETH)  
10. 418-7161 [1] GEAR-SUN (23-TEETH)  
11. 418-7162 [3] GEAR-PLANETARY (25-TEETH)  
12. 418-7163 [4] GEAR-PLANETARY (22-TEETH)  
13. 418-7164 [1] GEAR-RING (69-TEETH)  
14. 418-7167 [4] SHAFT  
15. 418-7196 [1] HOUSING  
16. 418-7232 [1] COVER-HOUSING  
17. 418-7233 [8] BEARING AS-ROLLER  
18. 418-7234 [1] CARRIER AS  
19. 418-7235 [1] CARRIER-PLANETARY  
20. 422-1352 [2] SPACER (49.6X69.5X6-MM THK)  
21. 422-4054 [3] RING-RETAINING  
22. 451-2182 [50] WASHER-HARD (13.5X25.5X3-MM THK)  
23. 453-3447 M [20] BOLT (M12X1.75X40-MM)  
24. 093-1730 [2] RING-RETAINING  
25. 095-0670 M [30] BOLT (M12X1.75X45-MM)  
26. 509-6676 [4] PIN-SPRING  
27. 096-2653 [1] RING-RETAINING  
28. 135-9044 [2] SEAL-LIP TYPE  
29. 136-2904 [1] BEARING  
30. 136-2940 [1] BEARING  
31. 191-2697 [1] SPACER (110X140X90.1-MM THK)  
32. 3K-0360 [1] SEAL-O-RING  
33. 8J-8879 [1] SEAL-O-RING  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP54890448
 

199-4695: FASTENER GP-SWING & FINAL DR

199-4695 FASTENER GP-SWING & FINAL DR
S/N TRH1-UP; BTK1-UP
PART OF 199-4593 POWER TRAIN AR
i01762664 SEBP5489
1994695 FASTENER GP-SWING & FINAL DR Parts scheme
  For full view, you need register

Parts for your 324D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2563 M [40] BOLT (M20X2.5X60-MM)  
2. 7X-2576 M [16] BOLT (M24X3X70-MM)  
3. 8T-4123 [40] WASHER (3.62X5.75X0.375-MM THK)  
4. 8T-4167 [16] WASHER-HARD (26X44X4-MM THK)  
5. 096-4755 [1] PIN  
6. 1U-8846 B SEALANT-GASKET  
8. 2B-7561 [2] CORK  
9. 5P-0767 E HOSE (90-CM)  
10. 5D-1026 [1] CLAMP-BAND  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP54890449
 

158-8987: FILTER & VALVE GP-PILOT

158-8987 FILTER & VALVE GP-PILOT -HYDRAULIC OIL
S/N TRH1-UP; BTK1-UP
PART OF 227-0566 TANK & FILTER GP-HYDRAULIC
i03021105 SEBP5489
1588987 FILTER & VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your 324D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-8670 C [1] FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC, PILOT)  
2. 215-4909 CY [1] VALVE GP-PILOT RELIEF (HYDRAULIC FILTER)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Troubleshooting Guide for Evaluating Seal Failures on Hydraulic Cylinders for Certain Excavators and Mobile Hydraulic Power Units{5133, 5456, 5457, 5458}
Troubleshooting Guide for Evaluating Seal Failures on Hydraulic Cylinders for Certain Excavators and Mobile Hydraulic Power Units{5133, 5456, 5457, 5458}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Stick Cylinder
324D Excavator Machine System Specifications
Boom Cylinder
324D Excavator Machine System Specifications
Bucket Cylinder
324D Excavator Machine System Specifications
Boom Lines - Long Reach Boom
324D Excavator Machine System Specifications
Boom Cylinder Lines
324D Excavator Machine System Specifications
Boom Lines
324D Excavator Machine System Specifications
Boom Lines
324D Excavator Machine System Specifications
Boom Cylinder Lines
324D Excavator Machine System Specifications
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Systems Operation
Cylinders (Boom, Stick and Bucket)
324D Excavator Hydraulic System
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Testing and Adjusting
Cylinder Speed - Check
324D Excavator Hydraulic System
Cylinder Drift - Check - Loaded Bucket
324D Excavator Hydraulic System
Cylinder Drift - Check - Empty Bucket
324D Excavator Hydraulic System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Bucket Cylinder - Remove and Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems
Boom Cylinder - Remove and Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems
Stick Cylinder - Remove and Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems
Service Magazine
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}
2012/05/18
Improved Seals for Implement Cylinders are Now Used on Certain Excavators and Mobile Hydraulic Power Units {5456, 5457}
2013/01/28
Hydraulic Cylinder Piston Assembly for Certain 320D/320E to 329D/329E Excavators {5456, 5457, 5458}
2014/03/27
New Implement Cylinder Rod Seals are Now Used on Certain Excavators and Mobile Hydraulic Power Units {5456, 5457, 5458}
2015/06/19
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Remanufactured Hydraulic Rods and Cylinders for Certain Cat Machines {7562}
2015/08/21

Caterpillar Parts SIS Catalog 324D L :

CYLINDER & SEAL GP-STICK
289-7966 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-BUCKET
289-8011 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-BUCKET
289-7974 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-BOOM
289-7956 CYLINDER & SEAL GP-BOOM
289-7965 CYLINDER & LINES GP-STICK
289-8010 CYLINDER & LINES GP-BUCKET
289-7973 CYLINDER & LINES GP-BUCKET
289-7955 CYLINDER & LINES GP-BOOM
CYLINDER GP-BUCKET
289-7975 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
315-4451 CYLINDER GP-BUCKET
CYLINDER GP-COUPLER
169-0753 CYLINDER GP-COUPLER
CYLINDER GP-STICK
289-7967 CYLINDER GP-STICK
DRIVE GP-SWING
191-2692 DRIVE GP-SWING
DRIVE GP-SWING
191-2693 DRIVE GP-SWING
DRIVE GP-SWING
418-7154 DRIVE GP-SWING
FASTENER GP-SWING & FINAL DR
199-4695 FASTENER GP-SWING & FINAL DR

Truck sale:

Caterpillar 324D L, Construction
92,227 USD 
Caterpillar 324D L, Construction
- Crawler Excavators
ZEPPELIN RUSSLAND OOO
Russia
Caterpillar 324DL, Construction
125,300 USD 
Caterpillar 324DL, Construction
- Crawler Excavators
TRACTOR & EQUIPMENT CO.
Caterpillar 324DL, Construction
75,020 
Caterpillar 324DL, Construction
- Crawler Excavators
MICHIGAN CAT
Caterpillar 324DL, Construction
On Request 
Caterpillar 324DL, Construction
- Crawler Excavators
GECOLSA - GENERAL DE EQUIPOS DE COLOMBIA
Colombia
Caterpillar 324DL, Construction
50,000 
Caterpillar 324DL, Construction
- Crawler Excavators
WYOMING MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.