234-5013 SENSOR GP-TEMPERATURE S/N TXF1-UP; KFH1-UP; MHX11531-UP; LKY1-UP PART OF 313-8169 LINES GP-FUEL, 354-0042 SENSOR GP-ENGINE ALSO AN ATTACHMENT 345D L

ELECTRICAL AND STARTING SYSTEM

SENSOR GP

0. 234-5013 SENSOR GP-
1. 274-7395 SENSOR GP-
2. 274-7396 SENSOR GP-

STARTING AID GP

3. 222-8365 STARTING A

STARTING MOTOR GP

4. 269-2757 STARTING M
5. 269-2757 STARTING M
6. 307-4584 STARTING M
7. 307-4584 STARTING M
8. 348-7651 STARTING M

SWITCH GP

9. 7N-0719 SWITCH GP-
0. INFORMATION

EXCAVATOR 345D L EXCAVATOR KFH
345D L Excavators KFH00001-UP (MACHINE) POWERED BY C13 Engine SEBP5498 345D L KFH (2009)

ELECTRICAL AND STARTING SYSTEM

SENSOR GP

4P-5820 SENSOR GP-SPEED

234-5012 SENSOR GP-TEMPERATURE

234-5013 SENSOR GP-TEMPERATURE

274-7395 SENSOR GP-TEMPERATURE

274-7396 SENSOR GP-TEMPERATURE

239-1607 LINES GP-SENSOR

#SEBP54980300

234-5013: SENSOR GP-TEMPERATURE

SENSOR GP-TEMPERATURE

234-5013 SENSOR GP-TEMPERATURE
S/N TXF1-UP; KFH1-UP; MHX11531-UP; LKY1-UP
PART OF 313-8169 LINES GP-FUEL, 354-0042 SENSOR GP-ENGINE
ALSO AN ATTACHMENT

i02508104 SEBP5498

2345013 SENSOR GP-TEMPERATURE Parts scheme

For full view, you need register

Parts for your 345D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	256-6453	[1]	SENSOR-TEMPERATURE (2-PIN)
2.	238-5080	[1]	SEAL-O-RING

#SEBP54980301

274-7395: SENSOR GP-TEMPERATURE

SENSOR GP-TEMPERATURE

274-7395 SENSOR GP-TEMPERATURE
S/N MHX8000-UP
PART OF 243-1555 SENSOR GP-ENGINE

i02379188 SEBP5498

2747395 SENSOR GP-TEMPERATURE Parts scheme

For full view, you need register

Parts for your 345D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	264-4297	[1]	SENSOR AS-TEMPERATURE (2-PIN)
	137-6645	[1]	PAD-CONNECTOR
2.	238-5080	[1]	SEAL-O-RING

#SEBP54980302

274-7396: SENSOR GP-TEMPERATURE

SENSOR GP-TEMPERATURE

274-7396 SENSOR GP-TEMPERATURE
S/N MHX8000-UP
PART OF 243-1555 SENSOR GP-ENGINE

i02379131 SEBP5498

2747396 SENSOR GP-TEMPERATURE Parts scheme

For full view, you need register

Parts for your 345D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	264-4297	[1]	SENSOR AS-TEMPERATURE (2-PIN)
	137-6645	[1]	PAD-CONNECTOR (CONNECTOR)
2.	6V-6609	[1]	SEAL-O-RING

#SEBP54980303

222-8365: STARTING AID GP-ETHER

STARTING AID GP-ETHER

222-8365 STARTING AID GP-ETHER
S/N KFH1-UP; LKY1-UP
PART OF 343-1208 OPTION AR-COLD WEATHER
AN ATTACHMENT

i02963343 SEBP5498

2228365 STARTING AID GP-ETHER Parts scheme

For full view, you need register

Parts for your 345D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-5528 C	[1]	BUSHING-REDUCER
2.	5P-6312	[1]	UNION
3.	5P-6313	[3]	NUT (5/16-24-THD)
4.	5P-6314	[3]	SLEEVE
5.	256-6881 C	[1]	ATOMIZER GP-ETHER
	236-4545	[1]	NUT-SLEEVE (5/16-24-THD)
6.	7N-0140	[2]	TUBE AS-COIL
7.	7N-2059	[1]	CLAMP AS (CYLINDER)
8.	230-0917	[1]	FITTING AS
	236-4545	[1]	NUT-SLEEVE (5/16-24-THD)
9.	233-1272	[1]	PLATE AS
10.	233-1286	[1]	PLATE AS
11.	239-1134 Y	[1]	VALVE GP-ETHER STARTING (24-VOLT)
12.	255-3057	[1]	TUBE
13.	272-4789	[1]	TUBE
14.	324-4192	[1]	TUBE
15.	239-6662	[1]	TUBE
16.	1B-3581	[1]	CLIP
17.	2B-2404	[5]	CLIP
18.	3D-5102	[7]	GROMMET
19.	6V-5048 C	[1]	SEAL-O-RING
20.	5K-0430	[1]	CLIP
21.	7G-4498	[1]	GROMMET
22.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
23.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
24.	8T-4179 M	[1]	BOLT (M12X1.75X20-MM)
25.	8T-4189 M	[4]	BOLT (M8X1.25X20-MM)
26.	8T-4191 M	[2]	BOLT (M10X1.5X16-MM)
27.	8T-4192 M	[2]	BOLT (M12X1.75X25-MM)
28.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
29.	8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)
30.	6G-2263	[1]	SPACER (10.5X19X28.5-MM THK)
31.	8T-4182 M	[1]	BOLT (M10X1.5X45-MM)

	7N-0296 A	[1]	CYLINDER AS-ETHER
			(MUST BE PROCURED LOCALLY FROM YOUR CATERPILLAR DEALER)
	A		NOT PART OF THIS GROUP
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP54980304

269-2757: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

269-2757 STARTING MOTOR GP-ELECTRIC
S/N TXF1-UP; MHX8000-UP
24-VOLT
PART OF 307-4584 STARTING MOTOR GP-ELECTRIC
ALSO AN ATTACHMENT

i02289193 SEBP5498

2692757 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your 345D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7M-0326	[1]	CONNECTOR
2.	9H-3757	[2]	WASHER (0.516X1X0.094-IN THK)
3.	1S-7446	[3]	SCREW-MACHINE (8-32X0.437-IN)
4.	8C-9660	[3]	WASHER (4.6X7.9X0.8-MM THK)
5.	9S-2544	[9]	SCREW-HEX HEAD (8-32X11.13-MM)
6.	7M-0327	[1]	WASHER-THRUST (17.4X25.4X1.6-MM THK)
7.	3T-3418	[1]	FRAME AS-END
	3T-3423	[1]	CUP
	9G-4101	[1]	BUSHING-END
	3T-3424	[1]	PLUG-FELT
8.	3T-9525 Y	[1]	PLATE AS-BRUSH (STARTING MOTOR)
9.	1T-0808	[2]	WASHER (0.516X0.812X0.09-IN THK)
10.	3T-3422	[1]	WIRE AS
11.	2J-8163	[2]	SEAL-O-RING
12.	7X-3373	[1]	BOLT (5/16-18X0.88-IN)
13.	3T-3434	[6]	PLUG (FELT)
14.	5J-5314	[5]	BOLT (5/16-18X1.5-IN)
15.	3L-3380	[1]	BUSHING-TERMINAL
16.	036-9821	[1]	WASHER
17.	4M-1828	[1]	RETAINER-SPRING
18.	306-3998	[1]	BOOT-RUBBER
19.	9M-7609	[1]	SPRING (SHIFT LEVER)
20.	4M-1827	[1]	RETAINER-SPRING
21.	8C-3089	[1]	SEAL-O-RING
22.	4M-1853	[1]	LEVER AS-SHIFT
23.	5M-3034	[1]	LOCKNUT (5/16-24-THD)
24.	7L-2894	[4]	GASKET
25.	4M-1831	[4]	PLUG-LEVER HOUSING
26.	4M-1854	[1]	SHAFT-LEVER
27.	1H-1023	[1]	SEAL-O-RING
28.	2D-6392	[1]	SEAL-O-RING
29.	7T-3974	[1]	HOUSING AS-DRIVE
30.	6N-3826	[1]	DRIVE AS-MOTOR
31.	2H-3429	[2]	RING-RETAINING (EXTERNAL)
32.	6V-1322	[4]	BOLT (1/4-20X0.375-IN)
33.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
34.	6N-3279	[1]	INSULATOR
35.	0S-1597	[13]	BOLT (1/4-28X1-IN)
36.	1M-9971	[1]	SPACER (0.835X1.72X0.188-IN THK)
37.	1H-2629	[3]	STRIP-INSULATION
38.	7M-0324	[1]	COIL AS-FIELD
39.	3R-8797	[12]	SCREW & WASHER AS (3/8-24X0.72-IN)
40.	7F-3488	[6]	SHOE-POLE
41.	7M-8651	[1]	ARMATURE AS
42.	7M-0325	[1]	INSULATOR
43.	3T-9524	[6]	BRUSH AS
44.	3N-3763	[1]	KIT-TERMINAL (STARTING MOTOR)
			(INCLUDES INSULATOR, BUSHINGS & WASHER)
45.	125-6537	[1]	INSULATOR
46.	3R-8801	[1]	CLAMP
47.	8F-1434	[2]	LOCKWASHER
48.	6V-8188	[6]	NUT (1/2-13-THD)
49.	7X-0562	[6]	WASHER-HARD (13.5X19X0.8-MM THK)
50.	4B-2049	[6]	NUT (10-32-THD)
51.	8T-0328	[10]	WASHER-HARD (5.5X10X1-MM THK)
52.	3T-9494	[6]	SPRING
53.	3E-7771	[1]	HOUSING AS (STARTING MOTOR)
54.	9G-4101	[1]	BUSHING-END
55.	3T-3424	[3]	PLUG-FELT
56.	3T-3423	[3]	CUP
57.	1M-9968	[1]	BUSHING (BEARING)
58.	2F-6678	[1]	SEAL-LIP TYPE
59.	4L-2729	[1]	WASHER (0.844X1.9X0.188-IN THK)
60.	4M-1896	[1]	BUSHING-TERMINAL
61.	045-4065	[4]	SCREW-MACHINE (10-32X0.75-IN)
62.	125-6535	[1]	COVER-STARTING MOTOR
63.	7T-9123	[1]	GASKET-PLATE
64.	338-3453	[1]	SOLENOID AS-STARTING MOTOR (24-VOLT)
	3R-8801	[1]	CLAMP
65.	125-6536	[1]	TERMINAL AS
	Y		SEPARATE ILLUSTRATION

#SEBP54980305

269-2757: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

269-2757 STARTING MOTOR GP-ELECTRIC
S/N TXF1-6813; MHX8000-UP
24-VOLT
PART OF 307-4584 STARTING MOTOR GP-ELECTRIC
ALSO AN ATTACHMENT

i07606735 SEBP5498

For full view, you need register

Parts for your 345D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7M-0326	[1]	CONNECTOR
2.	9H-3757	[2]	WASHER (0.516X1X0.094-IN THK)
3.	1S-7446	[3]	SCREW-MACHINE (8-32X0.437-IN)
4.	8C-9660	[3]	WASHER (4.6X7.9X0.8-MM THK)
5.	9S-2544	[9]	SCREW-HEX HEAD (8-32X11.13-MM)
6.	7M-0327	[1]	WASHER-THRUST (17.4X25.4X1.6-MM THK)
7.	3T-3418	[1]	FRAME AS-END
	3T-3423	[1]	CUP
	9G-4101	[1]	BUSHING-END
	3T-3424	[1]	PLUG-FELT
8.	3T-9525 Y	[1]	PLATE AS-BRUSH (STARTING MOTOR)
9.	1T-0808	[2]	WASHER (0.516X0.812X0.09-IN THK)
10.	3T-3422	[1]	WIRE AS
11.	2J-8163	[2]	SEAL-O-RING
12.	7X-3373	[1]	BOLT (5/16-18X0.88-IN)
14.	5J-5314	[5]	BOLT (5/16-18X1.5-IN)
15.	3L-3380	[1]	BUSHING-TERMINAL
16.	036-9821	[1]	WASHER
17.	4M-1828	[1]	RETAINER-SPRING
18.	306-3998	[1]	BOOT-RUBBER
19.	9M-7609	[1]	SPRING (SHIFT LEVER)
20.	4M-1827	[1]	RETAINER-SPRING
21.	8C-3089	[1]	SEAL-O-RING
22.	4M-1853	[1]	LEVER AS-SHIFT
23.	5M-3034	[1]	LOCKNUT (5/16-24-THD)
24.	7L-2894	[4]	GASKET
25.	4M-1831	[4]	PLUG-LEVER HOUSING
26.	4M-1854	[1]	SHAFT-LEVER
27.	1H-1023	[1]	SEAL-O-RING
28.	2D-6392	[1]	SEAL-O-RING
29.	7T-3974	[1]	HOUSING AS-DRIVE
30.	6N-3826	[1]	DRIVE AS-MOTOR
31.	2H-3429	[2]	RING-RETAINING (EXTERNAL)
32.	6V-1322	[4]	BOLT (1/4-20X0.375-IN)
33.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
34.	6N-3279	[1]	INSULATOR
35.	0S-1597	[13]	BOLT (1/4-28X1-IN)
36.	1M-9971	[1]	SPACER (0.835X1.72X0.188-IN THK)
37.	1H-2629	[3]	STRIP-INSULATION
38.	7M-0324	[1]	COIL AS-FIELD
39.	3R-8797	[12]	SCREW & WASHER AS (3/8-24X0.72-IN)
40.	7F-3488	[6]	SHOE-POLE
41.	7M-8651	[1]	ARMATURE AS
42.	7M-0325	[1]	INSULATOR
43.	3T-9524	[6]	BRUSH AS
44.	3N-3763	[1]	KIT-TERMINAL (STARTING MOTOR)
			(INCLUDES INSULATOR, BUSHINGS & WASHER)
46.	3R-8801	[1]	CLAMP
47.	8F-1434	[2]	LOCKWASHER
48.	6V-8188	[6]	NUT (1/2-13-THD)
49.	7X-0562	[6]	WASHER-HARD (13.5X19X0.8-MM THK)
50.	4B-2049	[6]	NUT (10-32-THD)
51.	8T-0328	[10]	WASHER-HARD (5.5X10X1-MM THK)
52.	3T-9494	[6]	SPRING
53.	3E-7771	[1]	HOUSING AS (STARTING MOTOR)
54.	9G-4101	[1]	BUSHING-END
55.	3T-3424	[3]	PLUG-FELT
56.	3T-3423	[3]	CUP
57.	1M-9968	[1]	BUSHING
58.	338-3453 C	[1]	SOLENOID AS-STARTING MOTOR (24-VOLT)
	3R-8801	[1]	CLAMP
59.	4L-2729	[1]	WASHER (0.844X1.9X0.188-IN THK)
60.	4M-1896	[1]	BUSHING-TERMINAL
61.	045-4065	[4]	SCREW-MACHINE (10-32X0.75-IN)
62.	125-6535	[1]	COVER-STARTING MOTOR
63.	7T-9123	[1]	GASKET-PLATE
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP54980306

307-4584: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

307-4584 STARTING MOTOR GP-ELECTRIC
S/N TXF1-6813; MHX8000-UP
24-VOLT
PART OF 286-9642, 349-4464 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT

i02981652 SEBP5498

3074584 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your 345D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8Y-9603	[1]	CABLE AS-STARTING MOTOR
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(28-CM)
2.	269-2757 Y	[1]	STARTING MOTOR GP-ELECTRIC (24-VOLT)
3.	303-2004	[1]	GASKET
4.	176-2543	[3]	BOLT-12 POINT HEAD (5/8-11X1.75-IN)
	E		ORDER BY THE CENTIMETER
	Y		SEPARATE ILLUSTRATION

#SEBP54980307

307-4584: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

307-4584 STARTING MOTOR GP-ELECTRIC
S/N TXF6814-UP
24-VOLT
PART OF 286-9642, 349-4464 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT

i07603440 SEBP5498

For full view, you need register

Parts for your 345D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8Y-9603	[1]	CABLE AS-STARTING MOTOR
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	159-8050 E		CABLE (00-GA, BLACK)(28-CM)
2.	348-7651 CY	[1]	STARTING MOTOR GP-ELECTRIC
3.	303-2004	[1]	GASKET
4.	176-2543	[3]	BOLT-12 POINT HEAD (5/8-11X1.75-IN)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP54980308

348-7651: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

348-7651 STARTING MOTOR GP-ELECTRIC
S/N TXF6814-UP; MHX8000-UP
PART OF 307-4584 STARTING MOTOR GP-ELECTRIC
ALSO AN ATTACHMENT

i04229553 SEBP5498

3487651 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your 345D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7M-0326	[1]	CONNECTOR
2.	9H-3757	[2]	WASHER (0.516X1X0.094-IN THK)
3.	1S-7446	[3]	SCREW-MACHINE (8-32X0.437-IN)
4.	8C-9660	[3]	WASHER (4.6X7.9X0.8-MM THK)
5.	9S-2544	[9]	SCREW-HEX HEAD (8-32X11.13-MM)
6.	7M-0327	[1]	WASHER-THRUST (17.4X25.4X1.6-MM THK)
7.	3T-3418	[1]	FRAME AS-END
	3T-3423	[1]	CUP
	3T-3424	[1]	PLUG-FELT
	9G-4101	[1]	BUSHING-END
8.	3T-9525 Y	[1]	PLATE AS-BRUSH (STARTING MOTOR)
9.	1T-0808	[2]	WASHER (0.516X0.812X0.09-IN THK)
10.	3T-3422	[1]	WIRE AS
11.	2J-8163	[2]	SEAL-O-RING
12.	7X-3373	[1]	BOLT (5/16-18X0.88-IN)
13.	3T-3434	[6]	PLUG
14.	5J-5314	[5]	BOLT (5/16-18X1.5-IN)
15.	3L-3380	[1]	BUSHING-TERMINAL
16.	8C-3089	[1]	SEAL-O-RING
17.	4M-1853	[1]	LEVER AS-SHIFT
18.	5M-3034	[1]	LOCKNUT (5/16-24-THD)
19.	7L-2894	[4]	GASKET
20.	4M-1831	[4]	PLUG-LEVER HOUSING
21.	4M-1854	[1]	SHAFT-LEVER
22.	1H-1023	[1]	SEAL-O-RING
23.	2D-6392	[1]	SEAL-O-RING
24.	7T-3974	[1]	HOUSING AS-DRIVE
25.	6N-3826	[1]	DRIVE AS-MOTOR
26.	2H-3429	[1]	RING-RETAINING
27.	6V-1322	[4]	BOLT (1/4-20X0.375-IN)
28.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
29.	6N-3279	[1]	INSULATOR
30.	0S-1597	[13]	BOLT (1/4-28X1-IN)
31.	1M-9971	[1]	SPACER (0.835X1.72X0.188-IN THK)
32.	1H-2629	[3]	STRIP-INSULATION
33.	7M-0324	[1]	COIL AS-FIELD
34.	3R-8797	[12]	SCREW & WASHER AS (3/8-24X0.72-IN)
35.	7F-3488	[6]	SHOE-POLE
36.	7M-8651	[1]	ARMATURE AS
37.	7M-0325	[1]	INSULATOR
38.	3T-9524	[6]	BRUSH AS (STARTING MOTOR)
39.	3N-3763	[1]	KIT-TERMINAL (STARTING MOTOR)
			(INCLUDES BUSHINGS & WASHERS)
41.	3R-8801	[1]	CLAMP
42.	8F-1434	[2]	LOCKWASHER
43.	6V-8188	[6]	NUT (1/2-13-THD)
44.	7X-0562	[6]	WASHER-HARD (13.5X19X0.8-MM THK)
45.	4B-2049	[6]	NUT (10-32-THD)
46.	8T-0328	[10]	WASHER-HARD (5.5X10X1-MM THK)
47.	3T-9494	[6]	SPRING
48.	3E-7771	[1]	HOUSING AS (STARTING MOTOR)
49.	9G-4101	[1]	BUSHING-END
50.	3T-3424	[3]	PLUG-FELT
51.	3T-3423	[3]	CUP
52.	1M-9968	[1]	BUSHING
53.	2F-6678	[1]	SEAL-LIP TYPE
54.	4L-2729	[1]	WASHER (0.844X1.9X0.188-IN THK)
55.	4M-1896	[1]	BUSHING-TERMINAL
56.	045-4065	[4]	SCREW-MACHINE (10-32X0.75-IN)
57.	125-6535	[1]	COVER-STARTING MOTOR
58.	338-3453	[1]	SOLENOID AS-STARTING MOTOR (24-VOLT)
	3R-8801	[1]	CLAMP
	Y		SEPARATE ILLUSTRATION

#SEBP54980309

7N-0719: SWITCH GP-DISCONNECT

SWITCH GP-DISCONNECT

7N-0719 SWITCH GP-DISCONNECT -BATTERY
S/N KFH1-UP; LKY1-UP
PART OF 342-2969 PANEL GP-CIRCUIT BREAKER

i00762190 SEBP5498

7N0719 SWITCH GP-DISCONNECT Parts scheme

For full view, you need register

Parts for your 345D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8H-5306	[1]	KEY (BATTERY DISCONNECT)
2.	8H-5303	[1]	NUT (3/4-16-THD)
3.	2H-3922	[2]	LOCKWASHER
4.	9F-5644	[2]	LOCKWASHER
5.	6F-7045	[2]	NUT-FULL (3/8-24-THD)

Information:

ELECTRICAL AND STARTING SYSTEM

SENSOR GP

Special Instruction

Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Technical Information Bulletin

Failure Of Water In Fuel Separator (WIF) Sensor On Certain CAT Products{1263, 1439}
Failure Of Water In Fuel Separator (WIF) Sensor On Certain CAT Products{1263, 1439}

Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}

Specifications

Engine Oil Pressure Sensor
C11 and C13 Engines

Coolant Temperature Sensor
C11 and C13 Engines

Atmospheric Pressure Sensor
C11 and C13 Engines

Engine Oil Pressure Sensor
C11 and C13 Engines

Inlet Manifold Temperature Sensor
C11 and C13 Engines

Inlet Manifold Air Pressure Sensor
C11 and C13 Engines

Atmospheric Pressure Sensor
C11 and C13 Engines

Engine Oil Pressure Sensor
C11 and C13 Engines

Atmospheric Pressure Sensor
C11 and C13 Engines

Fuel Temperature Sensor
C11 and C13 Engines

Atmospheric Pressure Sensor
C11 and C13 Engines

Engine Oil Pressure Sensor
C11 and C13 Engines

Coolant Temperature Sensor
C11 and C13 Engines

Fuel Temperature Sensor
C11 and C13 Engines

Inlet Manifold Temperature Sensor
C11 and C13 Engines

Engine Oil Pressure Sensor
C11 and C13 Engines

Inlet Manifold Air Pressure Sensor
C11 and C13 Engines

Engine Oil Pressure Sensor
C11 and C13 Engines

Atmospheric Pressure Sensor
C11 and C13 Engines

Speed/Timing Sensor
C11 and C13 Engines

Fuel Temperature Sensor
C11 and C13 Engines

Sensor Lines (Overload Warning)
345D, 349D and 349D2 Excavator Machine System Specifications

Liquid Level Sensor (Water Separator)
345D, 349D and 349D2 Excavator Machine System Specifications

Liquid Level Sensor (Water Separator)
C11 and C13 Engines

Coolant Temperature Sensor
C11 and C13 Engines

Speed/Timing Sensor
C11 and C13 Engines

Coolant Temperature Sensor
C11 and C13 Engines

Fuel Temperature Sensor
C11 and C13 Engines

Speed/Timing Sensor
C11 and C13 Engines

Fuel Pressure Sensor
C11 and C13 Engines

Atmospheric Pressure Sensor
C11 and C13 Engines

Inlet Manifold Temperature Sensor - Charge Air Cooler Outlet
C11 and C13 Engines

Speed/Timing Sensor
C11 and C13 Engines

Inlet Manifold Air Pressure Sensor
C11 and C13 Engines

Position Sensor (Stick)
345D, 349D and 349D2 Excavator Machine System Specifications

Speed/Timing Sensor
C11 and C13 Engines

Fuel Pressure Sensor
C11 and C13 Engines

Speed/Timing Sensor
C11 and C13 Engines

Inlet Manifold Air Pressure Sensor
C11 and C13 Engines

Inlet Manifold Temperature Sensor
C11 and C13 Engines

Engine Oil Pressure Sensor
C11 and C13 Engines

Speed/Timing Sensor
C11 and C13 Engines

Inlet Manifold Temperature Sensor
C11 and C13 Engines

Fuel Temperature Sensor
C11 and C13 Engines

Atmospheric Pressure Sensor
C11 and C13 Engines

Speed/Timing Sensor
C11 and C13 Engines

Tool Operating Manual

Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Sensors
345D, 349D and 349D2 Excavators Tool Control System

Sensors
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Reuse And Salvage Guidelines

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}

Troubleshooting

MID 039 - CID 0041 - FMI 06
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 09
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0190 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0262 - FMI 06
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1130 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1960 - FMI 09
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1968 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1968 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1968 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1969 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1969 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1969 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2265 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2265 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2265 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2266 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2266 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2266 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 3012 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 3012 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 3012 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1130 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1130 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1609 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1609 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1609 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0600 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Disassembly and Assembly

Fuel Temperature Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Boost Pressure Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Inlet Air Temperature Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Atmospheric Pressure Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Camshaft Position Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Engine Oil Pressure Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Crankshaft Position Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines

Service Magazine

Troubleshooting the "Water Separator Has Water" Warning Message {1263, 1439}
2011/12/22

Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04

Improved Fuel Level Sender As Is Now Used on Certain Cat<SUP>®</SUP> Products {1273, 7481}
2012/10/08