AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

227-6045 DRIVE GP-FINAL -WITHOUT MOTOR S/N KFH1-UP; LKY1-UP PART OF 227-6044 DRIVE GP-FINAL 345D L EXCAVATOR


POWER TRAIN
DRIVE GP-FINAL
POWER TRAIN AR
SPROCKET GP
FRAME AND BODY
BOX GP
BUMPER GP

EXCAVATOR 345D L EXCAVATOR KFH
 345D L Excavators KFH00001-UP (MACHINE) POWERED BY C13 Engine SEBP5498 345D L KFH   (2009)

POWER TRAIN

DRIVE GP-FINAL
DRIVE GP-FINAL
227-6044 DRIVE GP-FINAL
DRIVE GP-FINAL
227-6045 DRIVE GP-FINAL
DRIVE GP-FINAL
353-0500 DRIVE GP-FINAL
FASTENER GP-SWING & FINAL DR
227-6050 FASTENER GP-SWING & FINAL DR
FASTENER GP-SWING & FINAL DR
227-6051 FASTENER GP-SWING & FINAL DR
 

#SEBP54980360
 

227-6045: DRIVE GP-FINAL

227-6045 DRIVE GP-FINAL -WITHOUT MOTOR
S/N KFH1-UP; LKY1-UP
PART OF 227-6044 DRIVE GP-FINAL
i02180040 SEBP5498
2276045 DRIVE GP-FINAL Parts scheme 2276045 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 345D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2R-0524 [2] CONE-BEARING  
2. 2R-0525 [2] CUP-BEARING  
3. 4I-7576 [14] WASHER (66.3X104X3-MM THK)  
4. 7M-8485 [2] SEAL-O-RING  
5. 7Y-0661 [3] SHAFT-PLANETARY  
6. 7Y-0662 [4] SHAFT-PLANETARY  
7. 199-4583 [11] BEARING AS  
8. 7Y-0808 B [1] SHIM (1.6-MM THK)  
9. 7Y-1469 [1] COUPLING  
10. 7Y-1470 [1] GEAR-SUN (21-TEETH)  
11. 7Y-1472 B [1] SHIM (0.15-MM THK)  
12. 7Y-1473 B [1] SHIM (0.3-MM THK)  
13. 7Y-1474 B [1] SHIM (0.4-MM THK)  
14. 7Y-1475 B [1] SHIM (0.5-MM THK)  
15. 7Y-1476 B [1] SHIM (0.6-MM THK)  
16. 7Y-1477 B [1] SHIM (0.7-MM THK)  
17. 7Y-1478 B [1] SHIM (0.8-MM THK)  
18. 7Y-1479 B [1] SHIM (1-MM THK)  
19. 7Y-1480 B [1] SHIM (1.6-MM THK)  
20. 7Y-1482 [1] CARRIER-PLANETARY  
21. 7Y-1483 [1] GEAR-RING (63-TEETH)  
22. 7Y-1485 [1] CARRIER-PLANETARY  
23. 7Y-1487 [1] GEAR-RING (85-TEETH)  
24. 7Y-1488 [1] CARRIER AS  
  7Y-0656 [3] SHAFT-PLANETARY  
25. 7Y-1491 [1] GEAR-SUN (21-TEETH)  
26. 7Y-1493 [1] SPACER (8.7X50X14-MM THK)  
27. 7Y-1495 [3] GEAR-PLANETARY (29-TEETH)  
28. 7Y-1498 [1] COVER  
29. 7Y-1499 [3] GEAR-PLANETARY (20-TEETH)  
30. 7Y-1504 [4] GEAR-PLANETARY (20-TEETH)  
31. 7Y-5235 M [20] BOLT (M24X3X190-MM)  
32. 110-7217 [2] RING-RETAINING  
33. 114-1541 [6] PIN-DOWEL  
34. 169-5559 [1] GEAR-SUN (26-TEETH)  
35. 199-4719 [1] GEAR-COUPLING  
36. 200-3489 [1] HOUSING-MOTOR  
37. 200-3490 [1] HOUSING-GEAR  
38. 205-9025 [1] SEAL GP-DUO-CONE  
  205-9024 [2] RING-TORIC  
39. 227-6048 [12] WASHER (26X40X4-MM THK)  
40. 094-0584 [6] WASHER (40.3X72X1-MM THK)  
41. 199-4582 [3] BEARING AS  
42. 095-0891 [7] PIN-SPRING  
43. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
44. 3E-2338 [2] PLUG-PIPE (FINAL DRIVE, OIL DRAIN, FILL)  
45. 6V-8133 M [12] BOLT (M24X3X80-MM)  
46. 7Y-1484 [1] SPACER (191X221X8.5-MM THK)  
47. 7Y-1492 [2] SPACER (67X101.1X10-MM THK)  
48. 8C-5240 [1] SEAL-O-RING  
49. 8T-3957 M [10] BOLT-SOCKET HEAD (M12X1.75X30-MM)  
50. 8T-4167 [20] WASHER-HARD (26X44X4-MM THK)  
51. 8T-4240 [3] RING-RETAINING  
52. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP54980361
 

353-0500: DRIVE GP-FINAL

353-0500 DRIVE GP-FINAL
S/N KFH212-UP; LKY271-UP
PART OF 227-6042, 227-6043 POWER TRAIN AR
i03864012 SEBP5498
3530500 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 345D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-6399 Y [1] SPROCKET GP (NON-SEGMENTED)(NON-SEGMENTED)  
2. 227-6044 Y [1] DRIVE GP-FINAL (WITH MOTOR)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP54980362
 

227-6042: POWER TRAIN AR

227-6042 POWER TRAIN AR
S/N KFH1-UP
PART OF 340-3902 GENERAL AR
i03864130 SEBP5498
  For full view, you need register

Parts for your 345D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  296-6252 Y [1] DRIVE GP-SWING (WITH MOTOR, LH)  
  296-6249 Y [1] DRIVE GP-SWING (WITH MOTOR, RH)  
  227-6050 Y [1] FASTENER GP-SWING & FINAL DR  
  227-6044 Y [2] DRIVE GP-FINAL (WITH MOTOR)  
    S/N KFH1-211
  115-6399 Y [2] SPROCKET GP (NON-SEGMENTED)  
    S/N KFH1-211
  353-0500 Y [2] DRIVE GP-FINAL (WITH MOTOR, SPROCKET)  
    S/N KFH212-UP
  Y   SEPARATE ILLUSTRATION
 

#SEBP54980363
 

227-6043: POWER TRAIN AR

227-6043 POWER TRAIN AR
S/N LKY1-UP
PART OF 340-3901 GENERAL AR
i03863995 SEBP5498
  For full view, you need register

Parts for your 345D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  296-6252 Y [1] DRIVE GP-SWING (WITH MOTOR, LH)  
  296-6249 Y [1] DRIVE GP-SWING (WITH MOTOR, RH)  
  227-6051 Y [1] FASTENER GP-SWING & FINAL DR  
  227-6044 Y [2] DRIVE GP-FINAL (WITH MOTOR)  
    S/N LKY1-270
  115-6399 Y [2] SPROCKET GP (NON-SEGMENTED)  
    S/N LKY1-270
  353-0500 Y [2] DRIVE GP-FINAL (WITH MOTOR, SPROCKET)  
    S/N LKY271-UP
  Y   SEPARATE ILLUSTRATION
 

#SEBP54980364
 

115-6399: SPROCKET GP

115-6399 SPROCKET GP
S/N KFH1-UP; LKY1-UP
PART OF 353-0500 DRIVE GP-FINAL, 227-6042, 227-6043 POWER TRAIN AR
i00827089 SEBP5498
  For full view, you need register

Parts for your 345D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  445-0553 Y [1] SPROCKET GP  
    -OR-
  445-0554 Y [1] SPROCKET GP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP54980365
 

445-0553: SPROCKET GP

445-0553 SPROCKET GP
S/N KFH1-UP; LKY1-UP
PART OF 115-6399 SPROCKET GP
i05584514 SEBP5498
4450553 SPROCKET GP Parts scheme
  For full view, you need register

Parts for your 345D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 447-1722 M [20] BOLT (M24X3X60-MM)  
2. 124-3296 [1] SPROCKET-TRACK  
  M   METRIC PART
 

#SEBP54980366
 

445-0554: SPROCKET GP

445-0554 SPROCKET GP
S/N KFH1-UP; LKY1-UP
PART OF 115-6399 SPROCKET GP
i05584513 SEBP5498
4450554 SPROCKET GP Parts scheme
  For full view, you need register

Parts for your 345D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-0380 M [20] BOLT (M24X3X60-MM)  
2. 124-3296 [1] SPROCKET-TRACK  
  M   METRIC PART
 

#SEBP54980367
 

223-2977: BOX & MTG GP-STORAGE

223-2977 BOX & MTG GP-STORAGE
S/N KFH1-UP; LKY1-UP
PART OF 340-3903, 340-3904, 359-2498, 359-2499 CHASSIS AR
i02169697 SEBP5498
2232977 BOX & MTG GP-STORAGE Parts scheme
  For full view, you need register

Parts for your 345D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 135-8578 [6] BOLT AS  
2. 223-2978 Y [1] BOX GP-STORAGE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP54980368
 

223-2978: BOX GP-STORAGE

223-2978 BOX GP-STORAGE
S/N KFH1-UP; LKY1-UP
PART OF 223-2977 BOX & MTG GP-STORAGE
i02171682 SEBP5498
2232978 BOX GP-STORAGE Parts scheme
  For full view, you need register

Parts for your 345D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-2187 [1] SUPPORT AS  
2. 236-3665 [1] BOX AS  
3. 236-3666 [1] COVER AS  
  3D-9143 [2] HINGE-BUTT  
  237-5586 E SEAL (73-CM EACH)  
  237-5586 E SEAL (42-CM EACH)  
4. 236-3668 [1] PLUNGER AS  
5. 342-1110 J [1] LOCK AS  
6. 236-3670 [1] STRIKER AS  
7. 236-3671 [1] SEAL  
8. 236-3672 B [1] SHIM (0.5-MM THK)  
9. 236-3673 [1] SHEET  
10. 095-0843 [1] PIN-COTTER  
11. 096-3780 [1] PIN-CLEVIS  
12. 096-3872 [1] GROMMET  
13. 5C-9553 M [1] BOLT (M6X1X16-MM)  
14. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
15. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
16. 8T-4133 M [4] NUT (M10X1.5-THD)  
17. 8T-4171 M [2] BOLT (M6X1X12-MM)  
18. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
19. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
20. 9X-8256 [7] WASHER (6.6X12X2-MM THK)  
21. 105-3487 M [4] BOLT-SOCKET HEAD (M6X1X20-MM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

#SEBP54980369
 

342-3588: BUMPER GP-FRONT

342-3588 BUMPER GP-FRONT -WITHOUT LOWER WIPER
S/N KFH1-UP; LKY1-UP
PART OF 340-3903, 340-3904, 359-2498, 359-2499 CHASSIS AR
i03640886 SEBP5498
3423588 BUMPER GP-FRONT Parts scheme
  For full view, you need register

Parts for your 345D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 357-3909 [1] BUMPER AS  
2. 7X-2550 M [2] BOLT (M12X1.75X110-MM)  
3. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 201-4441 E SEAL (10-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Final Drive Oil - Change
345D, 349D and 349D2 Excavators
Final Drive Oil Level - Check
345D, 349D and 349D2 Excavators
Final Drive Oil Sample - Obtain
345D, 349D and 349D2 Excavators
Special Instruction
Procedure to Install an Open Labyrinth Motor Housing on the Final Drives of Certain 345C, 345D, 349D, and 349D2 Excavators {4050}
Procedure to Install an Open Labyrinth Motor Housing on the Final Drives of Certain 345C, 345D, 349D, and 349D2 Excavators {4050}
Procedure for Proper Sealing of the Swing Drive and Final Drive on All Excavators {4050}
Procedure for Proper Sealing of the Swing Drive and Final Drive on All Excavators {4050}
Specifications
Final Drive
345D, 349D and 349D2 Excavator Machine System Specifications
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Systems Operation
Final Drive
345D, 349D and 349D2 Excavators Hydraulic System
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Duo-Cone Conventional Seals - Install
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems
Final Drive - Disassemble
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems
Final Drive - Assemble
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems
Final Drive and Travel Motor - Remove
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems
Final Drive and Travel Motor - Install
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Machine Systems
Service Magazine
A New Final Drive is Now Available On Certain 345C, 345D, 349D, and 349D2 Excavators {4050}
2013/04/17
Final Drive Motor Housings Are Available for Certain Excavators {4050}
2015/06/19
A New Final Drive Cover Is Now Used on Certain Hydraulic Excavators {4050}
A New Final Drive Cover Is Now Used on Certain Hydraulic Excavators {4050}
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}

Caterpillar Parts SIS Catalog 345D L :

DRIVE GP-FINAL
227-6044 DRIVE GP-FINAL
WIRING GP-WINDOW WIPER
342-3108 WIRING GP-WINDOW WIPER
WIRING GP-UNIT INJECTOR
230-0961 WIRING GP-UNIT INJECTOR
WIRING GP-REFUELING PUMP
238-1570 WIRING GP-REFUELING PUMP
WIRING GP-QUICK COUPLER
336-6195 WIRING GP-QUICK COUPLER
WIRING GP-PLATFORM
336-5983 WIRING GP-PLATFORM
WIRING GP-PLATFORM
291-7757 WIRING GP-PLATFORM
WIRING GP-PLATFORM
291-7757 WIRING GP-PLATFORM
DRIVE GP-FINAL
353-0500 DRIVE GP-FINAL
227-6042 POWER TRAIN AR
227-6043 POWER TRAIN AR
115-6399 SPROCKET GP
SPROCKET GP
445-0553 SPROCKET GP
SPROCKET GP
445-0554 SPROCKET GP
BOX & MTG GP-STORAGE
223-2977 BOX & MTG GP-STORAGE
BOX GP-STORAGE
223-2978 BOX GP-STORAGE

Truck sale:

Caterpillar 345D L
 
Caterpillar 345D L
- Crawler Excavators
GREGORY POOLE EQUIPMENT CO.
Caterpillar 345DL, Crawler Excavators, Construction
57,000 
Caterpillar 345DL, Crawler Excavators, Construction
- Crawler Excavators
MACALLISTER MACHINERY CO., INC
 
62,500 
Caterpillar 345DL, Crawler Excavators, Construction


 
128,000 
Caterpillar 345 DL, Crawler Excavators, Construction


Caterpillar 345 D L
 
Caterpillar 345 D L
- Crawler Excavators
MOHAMED ABDULRAHMAN AL-BAHAR
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.