6L-4502 CHART-PLATE & FILM C13 TRUCK ENGINE

Part No	Qty	Parts name
7E-8050	[1]	FILM GP (EPA CERTIFICATION)
		CONTACT YOUR LOCAL DEALER
		INSTALL ON TOP OF ENGINE OIL COOLER
		INSTALL LAMINANT ON TOP OF FILM
9Y-4294	[2]	FILM-WARNING (ELEC SHOCK HAZARD, UNIT INJ)
		INSTALL ONE TOWARDS FRONT OF ENGINE ON LEFT & RIGHT HAND SIDES OF VALVE COVER BASE
228-3581	[2]	FILM-WARNING (DO NOT OPERATE, READ OMM)
		INSTALL ONE ON LEFT & ONE ON RIGHT OF VALVE COVER BASE
115-5852	[1]	PLATE & FILM GP (ENGINE INFORMATION)
		CONTACT YOUR LOCAL DEALER
		INSTALL ON LEFT REAR SIDE OF VALVE BASE AS CLOSE AS POSSIBLE TO THE REAR OF THE ENGINE
		READABLE FROM LEFT SIDE OF ENGINE
		INSTALL LAMINANT OVER SILVER FILM, SUCH THAT BOTTOM EDGE OF FILM IS COVERED
290-3785	[1]	PLATE-IDENTIFICATION (CAT C13 ACERT)
		INSTALL CENTER OF VALVE COVER TO READ FROM RIGHT SIDE OF ENGINE
3N-3790	[1]	PLATE-SERIAL NUMBER (ENGINE)
		CONTACT YOUR LOCAL DEALER
		REFLATTEN AFTER STAMPING
		INSTALL WITH LOCTITE COMPANY DEPEND ADHESIVE IN UPPER RH SIDE OF CYL BLOCK

#SEBP55010151

473-2595: KIT-GASKET

KIT-GASKET

473-2595 KIT-GASKET -SINGLE CYLINDER HEAD
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REBUILD & REINSTALL A CYLINDER HEAD. KIT INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT, AS NEEDED. FOR IN LINE 4 & 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750-UP
FIELD INSTALLATION

i06249304 SEBP5501

For full view, you need register

Parts for your C13 TRUCK ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
9Y-1758	[1]	GASKET (CRANKCASE BREATHER)
197-8418	[1]	GASKET
197-8419	[1]	GASKET (TURBOCHARGER)
221-9392	[1]	GASKET (CYLINDER HEAD)
283-2238	[6]	GASKET (EXHAUST MANIFOLD)
230-3518	[1]	GASKET-MANIFOLD
274-6851	[1]	GASKET-TURBOCHARGER
212-7728	[10]	ISOLATOR AS
375-2467 M	[4]	LOCKNUT-FLANGE (M10X1.5-THD)
224-6361	[1]	SEAL
227-5075	[1]	SEAL
272-0389	[1]	SEAL
321-5639	[1]	SEAL
3S-9643	[1]	SEAL-LIP TYPE (WATER TEMPERATURE REGULATOR)
5P-5598	[1]	SEAL-O-RING
6V-5063	[7]	SEAL-O-RING
6V-6353	[1]	SEAL-O-RING
6V-6609	[5]	SEAL-O-RING
6V-9027	[1]	SEAL-O-RING
7L-6580	[2]	SEAL-O-RING
8C-3089	[1]	SEAL-O-RING
9X-7380	[1]	SEAL-O-RING
214-7566	[4]	SEAL-O-RING
214-7568	[12]	SEAL-O-RING
225-6948	[1]	SEAL-O-RING
228-7089	[1]	SEAL-O-RING
228-7090	[1]	SEAL-O-RING
238-5080	[3]	SEAL-O-RING
238-5081	[1]	SEAL-O-RING
238-5082	[1]	SEAL-O-RING
229-5711	[1]	SEAL-VALVE COVER
9X-8281 M	[4]	STUD-TAPERLOCK (M10X1.5X45-MM)

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED
M		METRIC PART

#SEBP55010152

473-6786: KIT-GASKET

KIT-GASKET

473-6786 KIT-GASKET -CENTRAL, LOWER STRUCTURE
KIT CONTAINS THE GASKETS, SEALS & BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP & BLOCK COVERS
FOR USE WITH @@@@@310-3462@@@@@, @@@@@369-1547@@@@@
FIELD INSTALLATION

i06195608 SEBP5501

For full view, you need register

Parts for your C13 TRUCK ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
8C-3445	[1]	CAP-DUST
157-0670	[1]	CAP-DUST
217-3674	[14]	FASTENER AS
209-7309	[3]	PLUG
217-3673	[1]	SEAL-ISOLATION
3J-7354	[2]	SEAL-O-RING
5P-8211	[1]	SEAL-O-RING
6V-3251	[1]	SEAL-O-RING
061-9455	[3]	SEAL-O-RING
061-9458	[3]	SEAL-O-RING
131-3718	[1]	SEAL-O-RING
214-7566	[7]	SEAL-O-RING
214-7568	[3]	SEAL-O-RING
228-4947	[1]	SEAL-O-RING
228-7089	[1]	SEAL-O-RING
238-5080	[2]	SEAL-O-RING
238-5082	[1]	SEAL-O-RING
238-5084	[3]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#SEBP55010153

475-0461: KIT-GASKET

KIT-GASKET

475-0461 KIT-GASKET -WATER PUMP
FIELD INSTALLATION

i06184864 SEBP5501

For full view, you need register

Parts for your C13 TRUCK ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
224-2675	[1]	SEAL
229-8810	[1]	SEAL
4F-7389	[1]	SEAL-O-RING
6V-5063	[2]	SEAL-O-RING
6V-7350	[1]	SEAL-O-RING
7L-6580	[2]	SEAL-O-RING
225-7003	[1]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#SEBP55010154

315-1551: PARTS GP-MISCELLANEOUS

PARTS GP-MISCELLANEOUS

315-1551 PARTS GP-MISCELLANEOUS

i03319100 SEBP5501

For full view, you need register

Parts for your C13 TRUCK ENGINE:

CATERPILLAR SIS

Part No	Qty	Parts name
8T-8916	[12]	BOLT (7/16-14X1.5-IN)
103-6169 M	[8]	BOLT-SELF-LOCKING (M16X2X60-MM)
232-1693 M	[6]	BOLT-FLANGE HEAD (M6X1X35-MM)
030-7935	[2]	CONNECTOR
230-7682	[1]	COVER
030-7951	[2]	ELBOW-FLARED
334-1603 I	[1]	HOSE AS
334-1604 I	[1]	HOSE AS
230-7693	[1]	INSERT
238-5084	[4]	SEAL-O-RING
8T-5360	[12]	WASHER (12X22.5X2.5-MM THK)
I		REFER TO HYDRAULIC INFORMATION SYSTEM
M		METRIC PART

#SEBP55010155

347-3191: PLATE & FILM GP

PLATE & FILM GP

347-3191 PLATE & FILM GP

i04585169 SEBP5501

For full view, you need register

Parts for your C13 TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3N-3469	[1]	TAG-INSTRUCTION (ENGINE PRESTART)
2.	3N-3790	[1]	PLATE-SERIAL NUMBER (ENGINE)
3.	8L-8413	[1]	STRAP-CABLE (WHITE)
4.	228-3581	[2]	FILM-WARNING (DO NOT OPERATE, READ OMM)
5.	290-3785	[1]	PLATE-IDENTIFICATION (CAT C13 ACERT)