BASIC ENGINE
VALVE MECHANISM GPLIFTING GP-ENGINE
CYLINDER BLOCK GP
AIR COMPRESSOR GP
MOUNTING GP-ALTERNATOR
BASIC ENGINE
VALVE MECHANISM GP#SEBP55140110
357-4826: LIFTER GP-VALVE
357-4826 LIFTER GP-VALVE
S/N A4K1001-1037
S/N A4K1001-1037
Parts for your 797 TRUCK:
CATERPILLAR SIS#SEBP55140111
397-4038: LIFTER GP-VALVE
Parts for your 797 TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 242-1377 | [1] | SLEEVE | |
| 2. | 486-3590 | [4] | LIFTER AS-VALVE | |
| 3. | 357-4823 | [1] | SHAFT AS | |
| 4. | 357-9456 M | [2] | BOLT-12 POINT HEAD (M12X1.75X80-MM) | |
| 5. | 384-5330 | [1] | HOUSING AS | |
| 384-3712 | [2] | DOWEL-HOLLOW | ||
| 551-1529 F | [2] | SHIM (0.2-MM THK) | ||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP55140112
553-4009: LIFTER GP-VALVE
Parts for your 797 TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 242-1377 | [1] | SLEEVE | |
| 2. | 486-3590 | [4] | LIFTER AS-VALVE | |
| (EACH INCLUDES) | ||||
| 2A. | 281-9369 | [1] | BUSHING | |
| 3. | 550-7772 | [1] | HOUSING AS | |
| 1S-6250 | [1] | DOWEL | ||
| 384-3712 | [1] | DOWEL-HOLLOW | ||
| 4. | 550-7773 | [1] | SHAFT AS | |
| 5. | 558-5647 M | [3] | BOLT-12 POINT HEAD (M14X2X85-MM) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP55140113
563-2035: LIFTER GP-VALVE
563-2035 LIFTER GP-VALVE
S/N TJM1-UP
S/N TJM1-UP
Parts for your 797 TRUCK:
CATERPILLAR SIS#SEBP55140114
283-9331: LIFTING GP-ENGINE
283-9331 LIFTING GP-ENGINE -ENGINE MOUNTED
S/N A4K1-UP; TJM1-UP
PART OF 511-1398, 519-3974 ENGINE AR
S/N A4K1-UP; TJM1-UP
PART OF 511-1398, 519-3974 ENGINE AR
Parts for your 797 TRUCK:
CATERPILLAR SIS#SEBP55140115
328-7097: LIFTING GP-ENGINE
328-7097 LIFTING GP-ENGINE -WITH CLASP
S/N A4K120-UP; TJM1-UP
PART OF 511-1398, 519-3974 ENGINE AR
S/N A4K120-UP; TJM1-UP
PART OF 511-1398, 519-3974 ENGINE AR
Parts for your 797 TRUCK:
CATERPILLAR SIS#SEBP55140116
317-6283: LINER GP-CYLINDER BLOCK
317-6283 LINER GP-CYLINDER BLOCK
S/N A4K1-UP; TJM1-UP
S/N A4K1-UP; TJM1-UP
Parts for your 797 TRUCK:
CATERPILLAR SIS#SEBP55140117
317-5527: LINES GP-AIR COMPRESSOR
317-5527 LINES GP-AIR COMPRESSOR
S/N A4K1-1008
S/N A4K1-1008
Parts for your 797 TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7W-9834 | [1] | VALVE-REGULATOR (AIR COMPRESSOR) | |
| 2. | 8M-7065 | [1] | GASKET (AIR INLET) | |
| 3. | 372-8403 I | [1] | HOSE AS | |
| 4. | 260-9141 | [1] | CONNECTOR | |
| 5. | 281-6534 I | [1] | HOSE AS | |
| 6. | 295-9825 I | [1] | HOSE AS | |
| 7. | 317-4606 I | [1] | HOSE AS | |
| 8. | 317-5519 I | [1] | HOSE AS | |
| 9. | 122-0450 | [1] | GROMMET | |
| 10. | 122-8905 | [1] | ELBOW (90-DEG) | |
| 11. | 1B-2790 | [2] | BOLT (5/16-18X1.375-IN) | |
| 12. | 227-5714 | [1] | ELBOW | |
| 13. | 228-6046 | [1] | CONNECTOR | |
| 14. | 2T-1922 | [2] | ELBOW | |
| 15. | 2Y-5829 M | [1] | NUT (M10X1.5-THD) | |
| 16. | 148-8389 | [1] | ELBOW AS | |
| 7X-0492 | [1] | ELBOW | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 17. | 6V-1820 M | [1] | BOLT (M10X1.5X30-MM) | |
| 18. | 6V-5839 | [2] | WASHER (11X21X2.5-MM THK) | |
| 19. | 6V-8397 | [4] | SEAL-O-RING | |
| 20. | 6V-8398 | [5] | SEAL-O-RING | |
| 21. | 6V-9028 | [2] | SEAL-O-RING | |
| 22. | 6V-9850 | [1] | ELBOW | |
| 24. | 8C-6872 | [1] | CONNECTOR | |
| 25. | 8T-1897 | [1] | CLIP (SLOT) | |
| 26. | 8T-1898 | [1] | CLIP (TAB) | |
| 27. | 8T-7490 | [1] | CONNECTOR-TUBE | |
| 28. | 8T-7524 | [1] | SEAL-O-RING | |
| 29. | 8T-7525 | [1] | SEAL-O-RING | |
| 30. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP55140118
317-5527: LINES GP-AIR COMPRESSOR
317-5527 LINES GP-AIR COMPRESSOR
S/N A4K1009-UP
S/N A4K1009-UP
Parts for your 797 TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7W-9834 | [1] | VALVE-REGULATOR (AIR COMPRESSOR) | |
| 2. | 260-9141 | [1] | CONNECTOR | |
| 3. | 281-6534 I | [1] | HOSE AS | |
| 4. | 295-9825 I | [1] | HOSE AS | |
| 5. | 317-4606 I | [1] | HOSE AS | |
| 6. | 317-5519 I | [1] | HOSE AS | |
| 7. | 372-8403 I | [1] | HOSE AS | |
| 8. | 122-0450 | [1] | GROMMET | |
| 9. | 122-8905 | [1] | ELBOW (90-DEG) | |
| 10. | 352-6504 C | [1] | ELBOW AS | |
| 7X-0492 | [1] | ELBOW | ||
| 228-7088 | [1] | SEAL-O-RING | ||
| 11. | 8M-8162 C | [2] | BOLT-12 POINT HEAD (5/16-18X1.5-IN) | |
| 12. | 227-5714 | [1] | ELBOW | |
| 13. | 392-0805 C | [1] | CONNECTOR AS | |
| 228-6046 | [1] | CONNECTOR | ||
| 228-7089 | [1] | SEAL-O-RING | ||
| 228-7100 | [1] | SEAL-O-RING | ||
| 14. | 367-5990 C | [2] | ELBOW AS | |
| (EACH INCLUDES) | ||||
| 2T-1922 | [1] | ELBOW | ||
| 180-8424 | [1] | SEAL-O-RING | ||
| 16. | 6D-7128 C | [1] | SEAL-O-RING | |
| 18. | 228-7089 C | [1] | SEAL-O-RING | |
| 19. | 228-7090 C | [2] | SEAL-O-RING | |
| 20. | 219-0669 C | [1] | SEAL-O-RING | |
| 21. | 297-7976 C | [1] | ELBOW AS | |
| 6V-9850 | [1] | ELBOW | ||
| 228-7089 | [1] | SEAL-O-RING | ||
| 22. | 330-9763 C | [1] | CONNECTOR AS | |
| 8C-6872 | [1] | CONNECTOR | ||
| 228-7090 | [1] | SEAL-O-RING | ||
| 23. | 8M-7065 | [1] | GASKET (AIR INLET) | |
| 24. | 8T-1897 | [1] | CLIP (SLOT) | |
| 25. | 8T-1898 | [1] | CLIP (TAB) | |
| 26. | 8T-7490 | [1] | CONNECTOR-TUBE | |
| 27. | 228-7103 C | [1] | SEAL-O-RING | |
| 28. | 228-7106 C | [1] | SEAL-O-RING | |
| 29. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
#SEBP55140119
347-8894: MOUNTING GP-ALTERNATOR
347-8894 MOUNTING GP-ALTERNATOR
S/N A4K1-1005
S/N A4K1-1005
Parts for your 797 TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 160-8492 M | [1] | BOLT (M10X1.5X85-MM) | |
| 2. | 235-2484 | [1] | SEAL-LIP TYPE | |
| 3. | 273-1104 | [1] | COVER | |
| 4. | 350-7106 | [1] | BELT-SERPENTINE (ALTERNATOR) | |
| 5. | 325-4723 | [1] | PULLEY (8-GROOVE) | |
| 6. | 331-3985 | [1] | SUPPORT | |
| 7. | 331-3986 | [1] | SUPPORT | |
| 8. | 338-5320 | [1] | GUARD AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 9. | 346-9011 | [1] | PLATE | |
| 10. | 350-2565 | [1] | PULLEY AS (8-GROOVE) | |
| 300-8567 | [1] | SLEEVE | ||
| 11. | 131-3718 | [1] | SEAL-O-RING | |
| 12. | 154-1580 | [1] | WASHER-HARD (22X38X6-MM THK) | |
| 13. | 198-4766 | [3] | WASHER-HARD (11X25X10-MM THK) | |
| 14. | 5A-3604 M | [2] | BOLT-SOCKET HEAD (M8X1.25X25-MM) | |
| 15. | 5P-8245 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 16. | 6V-1820 M | [1] | BOLT (M10X1.5X30-MM) | |
| 17. | 6V-2317 M | [6] | BOLT (M8X1.25X30-MM) | |
| 18. | 6V-3531 M | [1] | BOLT (M20X2.5X50-MM) | |
| 19. | 6V-5815 M | [2] | BOLT (M10X1.5X75-MM) | |
| 20. | 6V-5839 | [5] | WASHER (11X21X2.5-MM THK) | |
| 21. | 6V-8336 M | [2] | BOLT (M12X1.75X70-MM) | |
| 22. | 8C-2926 M | [2] | BOLT (M10X1.5X140-MM) | |
| 23. | 8T-0355 M | [2] | BOLT (M10X1.5X110-MM) | |
| 24. | 329-8797 | [1] | BELT TENSIONER | |
| 25. | 351-4499 | [1] | PLATE | |
| 26. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
Information:
BASIC ENGINE
VALVE MECHANISM GP
Truck Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
2012/10/08
Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
2012/10/08
Operation and Maintenance Manual
Special Instruction
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Procedure to Modify the <NOBR>367-0491</NOBR> Rocker Stand and the <NOBR>373-5448</NOBR> Rocker Stand to the <NOBR>525-1901</NOBR> Rocker Stand {1102, 1123}
Procedure to Modify the367-0491 Rocker Stand and the 373-5448 Rocker Stand to the 525-1901 Rocker Stand {1102, 1123}
Procedure to Modify the
Specifications
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
Systems Operation
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Information Release Memo
Testing and Adjusting
Crankshaft Position for Fuel Injector Adjustment and Valve Lash Setting
3524B Engines for 797 and 797B Off-Highway Trucks
3524B Engines for 797 and 797B Off-Highway Trucks
Finding the Top Center Position for the No. 1 Piston
3524B Engines for 797 and 797B Off-Highway Trucks
3524B Engines for 797 and 797B Off-Highway Trucks
Finding the Top Center Position for the No. 1 Piston
C175-16 and C175-20 Engines for Off-Highway Trucks
C175-16 and C175-20 Engines for Off-Highway Trucks
Troubleshooting
Disassembly and Assembly
Service Magazine
New Cylinder Head Groups and Valve Mechanisms {1100, 1102, 1121, 1123}
New Cylinder Head Groups and Valve Mechanisms {1100, 1102, 1121, 1123}
New Cylinder Head Groups and Valve Mechanisms {1100, 1102, 1121, 1123}
An Improved Rocker Arm Base and an Improved Seal for the Rocker Arm Base are Now Used {1123, 1123}
2004/09/20
2004/09/20
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
2012/10/08
Remanufactured Camshaft and Lifter Kits Are Available for Certain 3500B Engines {1209, 1210}
2013/09/19
2013/09/19
A New Rocker Stand Is Now Used on Certain C175 Off-Highway Truck Engines {1102}
A New Rocker Stand Is Now Used on Certain C175 Off-Highway Truck Engines {1102}
A New Rocker Stand Is Now Used on Certain C175 Off-Highway Truck Engines {1102}