314-9532 CONVERSION AR-MACHINE -REPOWER S/N 8CJ1-UP; 63X1-UP ADDITIONAL MACHINE MODIFICATIONS WILL BE REQUIRED TO INSTALL THIS CONVERSION ARRANGEMENT FOR USE WITH 980C & 980F TIER 3 REPOWER FIELD INSTALLATION 980C

314-9532: CONVERSION AR-MACHINE

314-9532 CONVERSION AR-MACHINE -REPOWER
S/N 8CJ1-UP; 63X1-UP
ADDITIONAL MACHINE MODIFICATIONS WILL BE REQUIRED TO INSTALL THIS CONVERSION ARRANGEMENT
FOR USE WITH 980C & 980F TIER 3 REPOWER
FIELD INSTALLATION

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
Y	[1]	KIT-CONVERSION (REPOWER)
		(PROVIDES A BREAKDOWN OF THE SERVICEABLE PARTS REQUIRED FOR THE REPOWER, EXCLUDING THE ENGINE & OPTIONAL GROUPS.)
314-9540 BY	[1]	CONVERSION AR-MACHINE (REPOWER)(OPTIONAL)
314-9535 Y	[1]	CONVERSION GP-AIR INLET & EXH
314-9533 Y	[1]	CONVERSION GP-COOLING SYSTEM
314-9534 Y	[1]	CONVERSION GP-ELECTRICAL
314-9538 Y	[1]	CONVERSION GP-HYDRAULIC SYSTEM
314-9536 Y	[1]	CONVERSION GP-POWER TRAIN
314-9531 Y	[1]	ENGINE AR-COMPLETE
314-9539 Y	[1]	INSTALLATION GP-ENGINE
B		USE AS REQUIRED
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

314-9540: CONVERSION AR-MACHINE

CONVERSION AR-MACHINE

314-9540 CONVERSION AR-MACHINE -REPOWER
S/N 8CJ1-UP; 63X1-UP
PART OF 314-9532 CONVERSION AR-MACHINE
FOR USE WITH EMISSIONS REPOWER ENGINE

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
314-9541 BY	[1]	AIR CONDITIONER AR
344-9061 BY	[1]	COOLING AR-HIGH AMBIENT TEMP
		(ABOVE COMPONENTS LISTED IN THIS ARRANGEMENT ARE REPLACEMENT FOR THE STANDARD COMPONENTS CALLED OUT
		IN THE COOLING SYSTEM CONVERSION GROUP)
344-9060 Y	[1]	ELECTRICAL AR
344-9062 Y	[1]	WASTE HANDLING AR
		(ABOVE COMPONENTS LISTED IN THIS ARRANGEMENT ARE REPLACEMENT FOR THE STANDARD COMPONENTS CALLED OUT
		IN THE COOLING SYSTEM CONVERSION GROUP)
B		USE AS REQUIRED
Y		SEPARATE ILLUSTRATION

344-9062: WASTE HANDLING AR

WASTE HANDLING AR

344-9062 WASTE HANDLING AR
S/N 8CJ1-UP; 63X1-UP
PROVIDE AN OPTIONAL ARRANGEMENT THAT CONTAINS COMPONENTS NEEDED TO INSTALL A WASTE HANDLING COOLING SYSTEM, THAT IS COMPATIBLE WITH AN EMISSIONS REPOWER
PART OF 314-9540 CONVERSION AR-MACHINE

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
311-4543 Y	[1]	FAN GP-SUCTION (VARIABLE PITCH FAN)
311-4544 Y	[1]	LINES GP-HYDRAULIC FAN
306-5348 Y	[1]	WIRING GP-CAB (VARIABLE PITCH FAN)
306-5351 Y	[1]	WIRING GP-CHASSIS (VARIABLE PITCH FAN)
224-1185	[2]	FILM-WARNING (FLYING DEBRIS, READ OMM)
324-0305	[1]	PLATE AS-MOUNTING (VARIABLE PITCH FAN AIR PUMP)
330-3031	[1]	PLATE AS
8T-3612 M	[3]	NUT-WELD (M8X1.25-THD)
M		METRIC PART
Y		SEPARATE ILLUSTRATION

358-4441: ENGINE AR

ENGINE AR

358-4441 ENGINE AR
S/N TXF1-UP

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
357-6588 Y	[1]	ENGINE AR-CORE
354-0764 Y	[1]	PLATE & FILM GP
		S/N TXF1-6472
495-9580 Y	[1]	PLATE & FILM GP
		S/N TXF6473-UP
317-3222	[1]	ELECTRONICS GP-ENGINE RATINGS
Y		SEPARATE ILLUSTRATION

314-9531: ENGINE AR-COMPLETE

ENGINE AR-COMPLETE

314-9531 ENGINE AR-COMPLETE
S/N TXF1-UP; MHX9908-UP
232 BRAKE KW (311 BHP) AT 1800 RPM
PART OF 314-9532 CONVERSION AR-MACHINE
FOR USE WITH 980C & 980F WHEEL LOADER EMISSIONS RETROFIT REPOWER

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
237-9767 Y	[1]	ALTERNATOR GP-CHARGING
237-9755 Y	[1]	BASE GP-OIL FILTER (ENGINE)
267-0007 Y	[1]	BREATHER GP (CRANKCASE)(CRANKCASE)
251-7610 Y	[1]	CONNECTION GP-ELECTRICAL
233-6191 Y	[1]	CONTROL & MTG GP-ENGINE ELEK
251-7600 Y	[1]	COOLER GP-ENGINE OIL
		S/N TXF1-2667
420-7317 Y	[1]	COOLER GP-ENGINE OIL
		S/N TXF2668-UP
315-5905 Y	[1]	COOLER GP-TRANSMISSION OIL
227-2574 Y	[1]	COVER GP-FRONT HOUSING
344-7560 Y	[1]	COVER GP-VALVE MECHANISM
		S/N MHX9908-99999
355-7194 Y	[1]	COVER GP-VALVE MECHANISM
		S/N TXF1-UP
117-2766 Y	[1]	DAMPER GP
237-9769 Y	[1]	DRIVE GP-ACCESSORY
286-5804 Y	[1]	ENGINE AR-CORE
		S/N MHX9908-99999
358-4441 Y	[1]	ENGINE AR
		S/N TXF1-UP
117-2771 Y	[1]	FASTENER GP-DAMPER & PULLEY
244-8677 Y	[1]	FILLER GP-ENGINE OIL
231-3492 Y	[1]	FILTER GP-ENGINE OIL
285-6638 Y	[1]	FILTER GP-FUEL (SECONDARY)
		S/N MHX9908-99999
355-0050 Y	[1]	FILTER GP-FUEL (SECONDARY)
		S/N TXF1-UP
315-5909 Y	[1]	FLYWHEEL GP
340-7752 Y	[1]	FUMES DISPOSAL GP
356-1232 Y	[1]	GAUGE GP-OIL LEVEL (DIPSTICK) (ENGINE)
315-5901 Y	[1]	HOUSING GP-FLYWHEEL
218-7272 Y	[1]	HOUSING GP-FRONT
		S/N TXF1-UP
224-0880 Y	[1]	LIFTING GP-ENGINE
237-9754 Y	[1]	LINES GP-AIR
237-9756 Y	[1]	LINES GP-AIR (90-DEG)
251-7595 Y	[1]	LINES GP-FUEL
234-7843 Y	[1]	LINES GP-TURBOCHARGER OIL
243-1667 Y	[1]	LINES GP-WATER (SINGLE WATER REGULATOR)
255-2397 Y	[1]	LINES GP-WATER (PUMP)
267-3476 Y	[1]	MANIFOLD GP-EXHAUST
222-3092 Y	[1]	MANIFOLD GP-INLET (MID)
219-7440 Y	[1]	MOUNTING GP-FAN DRIVE
229-8084 Y	[1]	MOUNTING GP-VALVE MECHANISM
		S/N TXF1-UP
315-5906 Y	[1]	PAN GP-OIL
117-0165 Y	[1]	PLUG GP-CYLINDER BLOCK (OIL GALLERY, END)
227-9545 Y	[1]	PLUG GP-CYLINDER BLOCK (OIL GALLERY, RH)
269-6164 Y	[1]	PLUG GP-ENGINE
223-3875 Y	[1]	PLUG GP-CYLINDER BLOCK (TIMING, CRANKSHAFT)
		S/N TXF1-UP
123-0789 Y	[1]	PULLEY GP-ALTERNATOR
230-7168 Y	[1]	PULLEY GP-CRANKSHAFT
235-1080 Y	[1]	PUMP GP-FUEL PRM & PRIM FILTER
305-6163 Y	[1]	PUMP GP-FUEL TRANSFER
116-1091 Y	[1]	SEAL GP-CRANKSHAFT (REAR)
243-1555 Y	[1]	SENSOR GP-ENGINE (TEMPERATURE, PRESSURE)
		S/N MHX9908-99999
192-3271 Y	[1]	SUPPORT GP-ENGINE
261-1035 Y	[1]	TURBOCHARGER GP
237-9752 Y	[1]	WIRING GP-ELECTRONIC CONTROL (ENGINE)
		S/N MHX9908-99999
354-0044 Y	[1]	WIRING GP-ELECTRONIC CONTROL (ENGINE)
		S/N TXF1-UP
317-3222	[1]	ELECTRONICS GP-ENGINE RATINGS

		PLEASE USE THE GASKET KIT LINK IN SIS OR CONTACT YOUR LOCAL DEALER FOR THE LATEST GASKET KIT INFORMATION
Y		SEPARATE ILLUSTRATION

286-5804: ENGINE AR-CORE

ENGINE AR-CORE

286-5804 ENGINE AR-CORE
S/N MHX9908-UP

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
267-0010 Y	[1]	BASE GP-VALVE COVER (ENGINE)
223-7463 Y	[1]	CAMSHAFT GP
224-3881 Y	[1]	CRANKSHAFT GP
240-7271 Y	[1]	CYLINDER BLOCK GP
		S/N MHX9908-UP
305-0618 Y	[1]	CYLINDER HEAD GP
		S/N MHX9908-UP
222-3088 Y	[1]	GEAR GP-FRONT
218-7272 Y	[1]	HOUSING GP-FRONT
229-8084 Y	[1]	MOUNTING GP-VALVE MECHANISM
261-1506 Y	[6]	PISTON & ROD GP
		S/N MHX9908-UP
223-3875 Y	[1]	PLUG GP-CYLINDER BLOCK (TIMING, CRANKSHAFT)
233-5221 Y	[1]	PUMP GP-ENGINE OIL
253-1461 Y	[6]	PUMP GP-FUEL INJECTION
305-6163 Y	[1]	PUMP GP-FUEL TRANSFER
		S/N MHX9908-UP
228-5812 Y	[1]	PUMP GP-WATER
240-7272 Y	[1]	VALVE MECHANISM GP
230-0961 Y	[1]	WIRING GP-UNIT INJECTOR
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

357-6588: ENGINE AR-CORE

ENGINE AR-CORE

357-6588 ENGINE AR-CORE
S/N TXF1-UP

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
267-0010 Y	[1]	BASE GP-VALVE COVER
223-7463 Y	[1]	CAMSHAFT GP
224-3881 Y	[1]	CRANKSHAFT GP
240-7271 Y	[1]	CYLINDER BLOCK GP
305-0618 Y	[1]	CYLINDER HEAD GP
		-OR-
486-6230 Y	[1]	CYLINDER HEAD GP
222-3088 Y	[1]	GEAR GP-FRONT
261-1506 Y	[6]	PISTON & ROD GP
		-OR-
452-9086 Y	[6]	PISTON & ROD GP
233-5221 Y	[1]	PUMP GP-ENGINE OIL
253-1461 Y	[6]	PUMP GP-FUEL INJECTION
228-5812 Y	[1]	PUMP GP-WATER
354-0042 Y	[1]	SENSOR GP-ENGINE (TEMPERATURE, PRESSURE)
		S/N TXF1-7770
528-4093 Y	[1]	SENSOR GP-ENGINE
		S/N TXF7771-UP
240-7272 Y	[1]	VALVE MECHANISM GP
230-0961 Y	[1]	WIRING GP-UNIT INJECTOR
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

314-9539: INSTALLATION GP-ENGINE

INSTALLATION GP-ENGINE

314-9539 INSTALLATION GP-ENGINE
S/N 8CJ1-UP; 63X1-UP
PART OF 314-9532 CONVERSION AR-MACHINE
FOR USE WITH 980C & 980F TIER 3 REPOWER

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
315-5896 Y	[1]	AIR COMPRESSOR GP
260-1939 Y	[1]	DRIVE GP-ACCESSORY
224-4501 Y	[1]	GOVERNOR GP-AIR COMPRESSOR
243-1792 Y	[1]	LINES GP-AIR COMPRESSOR
315-5898 Y	[1]	LINES GP-AIR COMPRESSOR
235-1076 Y	[1]	LINES GP-FUEL DRAIN

315-5908	[1]	BAR AS
6Y-9960	[2]	MOUNT AS
		(EACH INCLUDES)
9W-8095	[1]	PAD-REBOUND

0T-0320	[17]	BOLT (7/16-14X1.25-IN)
6A-5591 M	[1]	BOLT (M12X1.75X25-MM)
7X-0349	[4]	BOLT (5/8-11X3-IN)
8T-4649 M	[2]	BOLT (M24X3X140-MM)
1B-8471	[1]	CLIP
9H-0846	[1]	SEAL-O-RING
9W-7385	[2]	SLEEVE
3E-4888	[2]	WASHER (32X144X12-MM THK)
3E-9411	[4]	WASHER-HARD (17.5X38X6-MM THK)
5P-8244	[17]	WASHER-HARD (12X22.5X2.5-MM THK)
5P-8245	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
8T-4167	[2]	WASHER-HARD (26X44X4-MM THK)
M		METRIC PART
Y		SEPARATE ILLUSTRATION

454-8420: KIT-CONVERSION

KIT-CONVERSION

454-8420 KIT-CONVERSION -REPOWER
S/N 8CJ1-UP; 63X1-UP
PROVIDES A BREAKDOWN OF THE SERVICEABLE PARTS REQUIRED FOR THE REPOWER. EXCLUDING THE ENGINE AND OPTIONAL GROUPS
PART OF 314-9532 CONVERSION AR-MACHINE

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
8T-4122	[8]	WASHER-HARD (17X32X3.5-MM THK)
8T-9393	[8]	BOLT (5/8-11X1.5-IN)
315-5907	[2]	SUPPORT AS
		(EACH INCLUDES)
355-8941 M	[8]	NUT-WELD (M16X2-THD)

		(ABOVE PARTS ARE PART OF COOLING SYSTEM CONVERSION GROUP 314-9533)

3K-5178	[1]	GROMMET
4E-1384	[1]	BUMPER-CONICAL
5P-1076	[8]	WASHER-HARD (13.5X30X4-MM THK)
5P-8309 D		SEAL (200-M)
5V-8780	[1]	KNOB
7X-0515	[1]	WASHER-HARD (17X35X5-MM THK)
7X-2546 M	[4]	BOLT (M10X1.5X180-MM)
7X-2553 M	[8]	BOLT (M16X2X40-MM)
7X-7729	[89]	WASHER (11X25X3-MM THK)
8T-4132 M	[1]	NUT (M16X2-THD)
8T-4136 M	[11]	BOLT (M10X1.5X25-MM)
8T-4137 M	[3]	BOLT (M10X1.5X20-MM)
8T-4138 M	[4]	BOLT (M6X1X20-MM)
8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
8T-4195 M	[51]	BOLT (M10X1.5X30-MM)
8T-4196 M	[15]	BOLT (M10X1.5X35-MM)
8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
8T-4226	[5]	WASHER-PLATED (10.5X45X3-MM THK)
8T-4956 M	[10]	BOLT (M12X1.75X35-MM)
8T-6466 M	[2]	BOLT (M10X1.5X60-MM)
8T-7934	[8]	WASHER-HARD (11X21X5-MM THK)
9X-8256	[8]	WASHER (6.6X12X2-MM THK)
9X-8257	[8]	WASHER (17.5X30X3.5-MM THK)
054-7915 D		SEAL (210-M)
112-5344	[1]	LATCH AS-DOOR
121-3307	[2]	MOUNT AS-RESILIENT
161-8919 Y	[1]	MOTOR GP-PISTON
189-5594	[2]	COVER AS
		(EACH INCLUDES)
194-5278	[1]	HINGE
192-7356	[1]	ADAPTER
209-5528	[1]	STRIKER
226-0291	[2]	LOCK AS
226-0321	[2]	CAM
239-3450	[1]	SUPPORT AS (RH)
6V-9632 M	[2]	NUT-WELD (M6X1-THD)
8T-3490 M	[6]	NUT-WELD (M10X1.5-THD)
8T-3597 M	[2]	NUT-WELD (M12X1.75-THD)
239-3451	[1]	SUPPORT AS (LH)
6V-9632 M	[2]	NUT-WELD (M6X1-THD)
8T-3490 M	[12]	NUT-WELD (M10X1.5-THD)
8T-3597 M	[2]	NUT-WELD (M12X1.75-THD)
239-3453	[1]	SUPPORT AS
8T-3490 M	[3]	NUT-WELD (M10X1.5-THD)
240-9977	[2]	BOSS
239-3454	[1]	SUPPORT AS
8T-3490 M	[12]	NUT-WELD (M10X1.5-THD)
8T-3597 M	[2]	NUT-WELD (M12X1.75-THD)
239-3455	[1]	HINGE AS
239-3456	[1]	SUPPORT AS-MOTOR
8T-3490 M	[8]	NUT-WELD (M10X1.5-THD)
8T-3597 M	[10]	NUT-WELD (M12X1.75-THD)
240-0105	[1]	SHROUD AS
240-0107	[1]	BAFFLE AS
8T-3490 M	[3]	NUT-WELD (M10X1.5-THD)
240-9973	[1]	BRACKET AS
240-9977	[1]	BOSS
240-9975	[1]	BRACKET AS
240-9977	[2]	BOSS
242-9415	[1]	BAFFLE AS-BOTTOM
6B-4594	[5]	RIVET
242-9417	[1]	ANGLE
242-9418	[1]	ANGLE
242-9419	[1]	ANGLE
243-2289	[2]	MOUNT AS
245-1172	[1]	BAFFLE
245-1173	[1]	BAFFLE
245-3206	[1]	ANGLE AS
8T-3490 M	[6]	NUT-WELD (M10X1.5-THD)
245-4018	[1]	BRACKET AS
8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
245-6011	[1]	BAFFLE AS
8T-3490 M	[4]	NUT-WELD (M10X1.5-THD)
250-3337	[1]	GUARD GP-FAN
8T-3490 M	[8]	NUT-WELD (M10X1.5-THD)
204-6529	[8]	WASHER (13.8X50X5-MM)
256-5309	[1]	CORE AS-RADIATOR
260-0354	[1]	CORE AS-AFTERCOOLER
262-6813	[1]	SPIDER AS-FAN (8-BLADE)
277-8628	[2]	MOUNT
277-8986	[1]	BRACKET
296-8592 E		SEAL (344-CM)
312-6458 E	[8]	TAPE-REFLECTIVE (8-CM)
344-5673 M	[4]	NUT (M6X1-THD)
344-5674 M	[1]	NUT (M8X1.25-THD)
344-5675 M	[15]	NUT (M10X1.5-THD)
349-5934	[1]	CORE AS-HYDRAULIC OIL COOLER (FAN)

		(ABOVE PARTS ARE PART OF RADIATOR GROUP 236-8990)

1P-4278	[2]	CLAMP-HOSE
3D-2824	[1]	SEAL-O-RING
3J-1907	[2]	SEAL-O-RING
3K-0360	[1]	SEAL-O-RING
371-8946 E		HOSE (4-CM)
5D-1026	[1]	CLAMP-BAND
5P-0767 E		HOSE (69-CM)
5P-1230	[1]	CONNECTOR
371-8094 E		HOSE (110-CM)
423-1982 E		HOSE (28-CM)
5P-4924	[1]	ELBOW
423-1980 E		HOSE (67-CM)
6L-8617	[1]	CAP-PRESSURE (7-PSI)
6S-8620	[2]	CLAMP-HOSE
7D-7233	[2]	CLIP
7J-0204	[1]	SEAL-O-RING
7K-1181	[1]	STRAP-CABLE
7M-8485	[1]	SEAL-O-RING
7X-1443	[8]	PROTECTOR
7X-7729	[4]	WASHER (11X25X3-MM THK)
7Y-1976 E		HOSE-WATER (285-CM)
8F-8151	[1]	VALVE-SHUTOFF
8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
8T-4136 M	[3]	BOLT (M10X1.5X25-MM)
8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
8T-4983	[2]	CLAMP-HOSE
9Y-9236	[1]	GAUGE-SIGHT
124-0396	[1]	FITTING-ELBOW
124-1479	[1]	CLIP
238-5079	[1]	SEAL-O-RING
241-8506	[1]	TUBE
260-1818	[1]	TUBE AS
268-1497	[1]	ELBOW
268-4045	[1]	CONNECTOR
312-1735	[1]	TANK AS-WATER
324-3210	[8]	CLAMP
337-8766	[1]	CONNECTOR
344-5675 M	[1]	NUT (M10X1.5-THD)
367-5995	[1]	ADAPTER

		(ABOVE PARTS ARE PART OF WATER LINES GROUP 236-8988)

3E-5169	[1]	GUARD-SWITCH
3E-6451	[1]	SWITCH GP-TEMPERATURE
102-8802		KIT-RECEPTACLE (2-PIN)
		(KIT INCLUDES RECEPTACLE AS & WEDGE)
8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
3E-8700 Y	[2]	SENSOR GP-TEMPERATURE
3J-1907	[4]	SEAL-O-RING
3K-0360	[1]	SEAL-O-RING
3Y-2888	[1]	CONNECTOR
5P-6944	[2]	ADAPTER
6T-3643	[1]	CIRCUIT BREAKER AS (15-AMPERE)
6V-8376	[2]	SCREW-MACHINE (8-32X0.25-IN)
9B-7233	[2]	LOCKWASHER
6V-6609	[3]	SEAL-O-RING
6V-8397	[1]	SEAL-O-RING
7J-0204	[1]	SEAL-O-RING
8C-3415	[1]	TEE
8N-3844	[1]	SENDER-TEMPERATURE
107-0616	[1]	SWITCH AS-PRESSURE
102-8802		KIT-RECEPTACLE (2-PIN)
		(KIT INCLUDES RECEPTACLE AS & WEDGE)
8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
109-0361	[1]	FILM-INSTRUCTION (ENGINE SHUTDOWN)
110-7887	[1]	SWITCH AS-START (KEY)
7T-6799	[1]	NUT-MOUNTING (1-32-THD)
8T-8729	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
102-8804	[1]	KIT-RECEPTACLE (4-PIN)
		(KIT INCLUDES RECEPTACLE AS & WEDGE)
130-7459	[1]	SWITCH AS-PRESSURE
102-8802		KIT-RECEPTACLE (2-PIN)
		(KIT INCLUDES RECEPTACLE AS & WEDGE)
8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
145-7028 Y	[1]	SENSOR GP-TEMPERATURE
158-6634 Y	[1]	SWITCH GP-TOGGLE
164-3651	[1]	ADAPTER
194-5226	[1]	WIRE AS (16-GA)
194-5227	[1]	WIRE AS (14-GA)
203-9007	[1]	NUT (1-1/2-18-THD)
209-8441 Y	[1]	HARNESS AS-PUMP (FUEL PRIMING)
214-7568	[1]	SEAL-O-RING
218-0400 Y	[2]	HARNESS AS-SENSOR
270-2679	[1]	LOCKWASHER
274-6717	[1]	SENSOR-PRESSURE
332-3972	[1]	LAMP AS-INDICATOR (12/24-VOLT, AMBER)
362-4869 Y	[1]	HARNESS AS-ENGINE
362-4870 Y	[1]	HARNESS AS-CAB

		(ABOVE PARTS ARE PART OF ELECTRICAL CONVERSION GROUP 314-9534)

8S-2332	[3]	BOLT-12 POINT HEAD (5/8-11X1.75-IN)
8Y-9603	[1]	CABLE AS-STARTING MOTOR
1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
9Y-6089	[1]	GASKET
348-7651 Y	[1]	STARTING MOTOR GP-ELECTRIC

		(ABOVE PARTS ARE PART OF MOTOR GROUP 369-0809)

8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)
8T-4908 M	[4]	BOLT (M8X1.25X25-MM)
147-0385	[1]	CLIP
201-8616 Y	[1]	PEDAL GP-GOVERNOR

		(ABOVE PARTS ARE PART OF PEDAL GROUP 207-1759)

1P-1708	[1]	STEM AS-COLLET
1P-3705	[2]	SEAL-RECTANGULAR
1P-4577	[2]	FLANGE-HALF
1P-4578	[6]	FLANGE-HALF
1P-4579	[4]	FLANGE-HALF
1P-4582	[2]	FLANGE-HALF
1P-5762	[2]	FLANGE-HALF
3J-1907	[2]	SEAL-O-RING
3S-8573	[1]	STEM AS
4J-0520	[1]	SEAL-O-RING
4J-0522	[3]	SEAL-O-RING
4J-0524	[2]	SEAL-O-RING
4J-0527	[1]	SEAL-O-RING
5F-3106	[1]	SEAL-O-RING
5P-2566	[4]	BOLT (1/2-13X1.5-IN)
5S-3779	[1]	STEM AS
5S-3836	[1]	STEM AS-COLLET
6V-8397	[2]	SEAL-O-RING
6V-8636	[1]	CONNECTOR
7J-6285	[1]	SEAL-O-RING
7X-0325	[4]	BOLT (1/2-13X2.5-IN)
8M-4986	[1]	SEAL-O-RING
5P-1291 E		HOSE (1-CM)
8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
8T-4122	[4]	WASHER-HARD (17X32X3.5-MM THK)
8T-4183 M	[4]	BOLT (M12X1.75X40-MM)
8T-4196 M	[4]	BOLT (M10X1.5X35-MM)
8T-4223	[16]	WASHER-HARD (13.5X25.5X3-MM THK)
8T-5005 M	[4]	BOLT (M10X1.5X70-MM)
8T-5360	[12]	WASHER (12X22.5X2.5-MM THK)
8T-6703	[2]	CLAMP-HOSE
8T-8916	[8]	BOLT (7/16-14X1.5-IN)
8T-8919	[8]	BOLT (1/2-13X1.75-IN)
8T-9393	[4]	BOLT (5/8-11X1.5-IN)
124-2055	[1]	COUPLING-PERMANENT
124-2103	[1]	COUPLING-PERMANENT
124-2130	[1]	COUPLING
124-2144	[1]	COUPLING AS-PERMANENT
124-2166	[1]	COUPLING-PERMANENT
187-2137	[1]	ELBOW
201-0967	[1]	COUPLING-PERMANENT
250-6026	[1]	BLOCK-HYDRAULIC
315-5903	[1]	TUBE AS
330-2012	[1]	PUMP GP-GEAR

		(ABOVE PARTS ARE PART OF POWER TRAIN CONVERSION GROUP 314-9536)

0T-0320	[17]	BOLT (7/16-14X1.25-IN)
1B-8471	[1]	CLIP
3E-4888	[2]	WASHER (32X144X12-MM THK)
3E-9411	[4]	WASHER-HARD (17.5X38X6-MM THK)
5P-8244	[17]	WASHER-HARD (12X22.5X2.5-MM THK)
5P-8245	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
6A-5591 M	[1]	BOLT (M12X1.75X25-MM)
6Y-9960	[2]	MOUNT AS
9W-8095	[1]	PAD-REBOUND
7X-0349	[4]	BOLT (5/8-11X3-IN)
8T-4167	[2]	WASHER-HARD (26X44X4-MM THK)
8T-4649 M	[2]	BOLT (M24X3X140-MM)
9H-0846	[1]	SEAL-O-RING
9W-7385	[2]	SLEEVE
315-5908	[1]	BAR AS

		(ABOVE PARTS ARE PART OF ENGINE INSTALLATION GROUP 314-9539)

4N-9680 Y	[1]	GOVERNOR GP-AIR COMPRESSOR
6L-1883	[2]	GASKET
6V-5217 M	[2]	BOLT (M8X1.25X20-MM)
6V-5221 M	[2]	BOLT (M8X1.25X80-MM)
8T-6757	[3]	PLUG-PIPE
9M-1974	[4]	WASHER-HARD (8.8X16X2-MM THK)
295-1842	[1]	KIT-ADAPTER

		(ABOVE PARTS ARE PART OF GOVERNOR GROUP 224-4501)

3S-2093	[4]	STRAP-CABLE
5D-1026	[1]	CLAMP-BAND
5P-0767 E		HOSE (56-CM)
8C-6959 E		HOSE (113-CM)

		(ABOVE PARTS ARE PART OF DRAIN LINES GROUP 235-1076)

2W-9499 M	[4]	BOLT (M6X1X40-MM)
3D-2824	[1]	SEAL-O-RING
6V-1903		SEAL-O-RING
6V-4249 M	[1]	BOLT (M10X1.5X50-MM)
6V-5050	[3]	SEAL-O-RING
6V-5839	[2]	WASHER (11X21X2.5-MM THK)
8K-2377	[1]	ELBOW-FLARED
8T-0154	[4]	CLAMP-HOSE
9S-8008	[1]	PLUG (1-1/16-12-THD)
9X-8267	[4]	WASHER (6.6X12X2-MM THK)
030-7950	[1]	ELBOW
032-8487	[1]	ELBOW
033-6783	[1]	FITTING
423-1985 G		HOSE (4-IN)
160-8492 M	[1]	BOLT (M10X1.5X85-MM)
240-5881	[1]	VALVE AS
241-4330	[1]	TUBE AS
241-6388	[1]	HOSE
250-6591	[1]	GASKET
252-8402	[1]	CHAMBER AS
252-9526	[1]	TUBE AS

		(ABOVE PARTS ARE PART OF COMPRESSOR LINES GROUP 243-1792)

8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
8T-4178 M	[1]	BOLT (M10X1.5X90-MM)
173-1498	[1]	PULLEY AS-IDLER (8-GROOVE)
207-8118	[2]	PULLEY AS-IDLER
219-7489	[1]	BELT TENSIONER
334-1624	[1]	BELT-SERPENTINE

		(ABOVE PARTS ARE PART OF ACCESSORY DRIVE GROUP 260-1939)

5P-8245	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
6V-4248 M	[4]	BOLT (M10X1.5X25-MM)
6V-5839	[4]	WASHER (11X21X2.5-MM THK)
6V-7611 M	[3]	BOLT (M12X1.75X40-MM)
179-4474	[1]	CAP-PROTECTIVE
192-1992	[1]	CAP-PROTECTIVE
222-2889	[1]	BRACKET
223-3505	[1]	SEAL
385-0936 Y	[1]	AIR COMPRESSOR GP

		(ABOVE PARTS ARE PART OF COMPRESSOR GROUP 315-5896)

1B-3057	[2]	CLIP
1B-8471	[1]	CLIP
1S-0994	[2]	CLIP (LOOP)
2Y-5829 M	[1]	NUT (M10X1.5-THD)
3E-4352	[4]	WASHER-HARD (8.8X20.5X2.5-MM THK)
4K-8864	[1]	CLIP (LOOP)
5C-7261 M	[2]	NUT (M8X1.25-THD)
5P-8245	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
6V-1820 M	[1]	BOLT (M10X1.5X30-MM)
6V-3251	[1]	SEAL-O-RING
6V-3822 M	[1]	BOLT (M10X1.5X35-MM)
6V-4248 M	[3]	BOLT (M10X1.5X25-MM)
6V-5048	[2]	SEAL-O-RING
6V-5839	[7]	WASHER (11X21X2.5-MM THK)
6V-6609	[3]	SEAL-O-RING
8M-0505	[1]	ADAPTER
8T-4908 M	[1]	BOLT (M8X1.25X25-MM)
9S-6524	[1]	BRACKET
9X-2488	[2]	CLAMP-HOSE
005-4173	[1]	ELBOW
030-7943	[1]	ELBOW
030-7946	[1]	ELBOW
034-3679	[1]	ADAPTER
122-6867 G		HOSE (14-IN)
122-6870 G		HOSE-HYDRAULIC (29-IN)
124-1950	[1]	COUPLING-PERMANENT
124-1961	[1]	COUPLING-PERMANENT
124-1993	[1]	COUPLING-PERMANENT
124-2000	[1]	COUPLING-PERMANENT
136-9699	[1]	BRACKET AS
8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
164-9609	[1]	ELBOW
292-7635	[1]	BOSS
315-5899	[1]	TUBE AS
319-8815 E		HOSE (8-CM)

		(ABOVE PARTS ARE PART OF COMPRESSOR LINES GROUP 315-5898)

0S-1595	[2]	BOLT (1/2-13X1.25-IN)
1H-6227	[1]	SEAL-O-RING
1P-4578	[6]	FLANGE-HALF
1S-0996	[1]	CLIP
2L-6726	[2]	RING-RETAINING
2P-1293	[2]	LOCKNUT (1-3/16-12-THD)
3D-2824	[7]	SEAL-O-RING
3J-1907	[9]	SEAL-O-RING
3J-7354	[1]	SEAL-O-RING
3K-0360	[1]	SEAL-O-RING
5P-1295	[1]	HOSE
3S-8571	[1]	STEM AS
4J-0520	[1]	SEAL-O-RING
4J-0522	[3]	SEAL-O-RING
4T-6009	[1]	TUBE AS-BAFFLE
5H-8848	[1]	SEAL-O-RING
5K-9090	[6]	SEAL-O-RING
5P-2566	[4]	BOLT (1/2-13X1.5-IN)
5P-8245	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
5S-3811	[1]	STEM AS-COLLET
5S-7379	[2]	BOLT (3/8-16X0.875-IN)
6V-0484	[2]	ELBOW
6V-0852	[5]	CAP-DUST
6V-3965	[5]	FITTING (QUICK DISCONNECT)
6V-6560	[1]	SEAL-O-RING
6V-8397	[7]	SEAL-O-RING
6V-8398	[3]	SEAL-O-RING
6V-8400	[1]	SEAL-O-RING
6V-8636	[1]	CONNECTOR
6V-8637	[1]	CONNECTOR
6V-8724	[1]	ELBOW
6V-8738	[1]	UNION
6V-8942	[2]	REDUCER-O-RING
6V-9001	[1]	ELBOW
6V-9004	[3]	ELBOW
6V-9007	[1]	ELBOW
6V-9008	[1]	ELBOW
6V-9160	[1]	TEE-FACE SEAL
6V-9170	[1]	NUT-BULKHEAD (1-14-THD)
6V-9182	[1]	ELBOW
6V-9350	[1]	TEE-BULKHEAD
6V-9649	[2]	ELBOW
6V-9746	[17]	SEAL-O-RING
6V-9839	[1]	TEE-SWIVEL
6V-9850	[1]	ELBOW
6V-9853	[3]	ELBOW
7B-3235	[2]	BOLT (1/2-13X1.375-IN)
7J-9108	[5]	SEAL-O-RING
7M-8485	[5]	SEAL-O-RING
7X-0872	[1]	TEE-SWIVEL
7X-2459	[1]	ADAPTER-TEE
8C-3206	[2]	FLANGE-HALF
8C-6864	[1]	ADAPTER
8F-9836	[2]	BOSS (3/8-16-THD)
8T-0249	[1]	ELBOW (SWIVEL)
8T-2353	[1]	ADAPTER
8T-4121	[23]	WASHER-HARD (11X21X2.5-MM THK)
8T-4137 M	[13]	BOLT (M10X1.5X20-MM)
8T-4182 M	[1]	BOLT (M10X1.5X45-MM)
8T-4196 M	[8]	BOLT (M10X1.5X35-MM)
8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
8T-4896	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
8T-5005 M	[1]	BOLT (M10X1.5X70-MM)
8T-5360	[8]	WASHER (12X22.5X2.5-MM THK)
8T-9382	[8]	BOLT (7/16-14X1.25-IN)
8X-8031	[1]	TUBE
9R-2821 M	[6]	BOSS (M10X1.5X15-MM)
9T-7507	[1]	BOSS-WELD
9X-6580	[2]	NUT (1-3/16-12-THD)
085-7356	[1]	FITTING
124-2078	[1]	COUPLING-PERMANENT
124-2105	[1]	COUPLING-PERMANENT
124-2114	[4]	COUPLING
124-2116	[1]	COUPLING-PERMANENT
124-2118	[1]	COUPLING-PERMANENT
124-2119	[2]	COUPLING-PERMANENT
124-2121	[3]	COUPLING-PERMANENT
124-2122	[1]	COUPLING-PERMANENT
124-2125	[1]	COUPLING-PERMANENT
124-2130	[2]	COUPLING
124-2131	[1]	COUPLING-PERMANENT
124-2137	[3]	COUPLING
124-2144	[2]	COUPLING AS-PERMANENT
124-2150	[1]	COUPLING-PERMANENT
124-2152	[1]	COUPLING-PERMANENT
124-2153	[2]	COUPLING
124-8333	[2]	ELBOW
126-6872	[1]	TEE
138-1916	[1]	TEE-BULKHEAD
144-0367	[2]	CLAMP-HOSE
152-9840	[1]	ELBOW
163-5382	[1]	SPACER (10.5X25X20-MM THK)
164-3651	[1]	ADAPTER
176-7319	[1]	BRACKET AS
8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
191-8735 Y	[1]	VALVE GP-DEMAND FAN
214-7568	[5]	SEAL-O-RING
228-7091	[1]	SEAL-O-RING
238-2865	[2]	BRACKET
238-5081	[1]	SEAL-O-RING
244-1426 Y	[1]	VALVE GP-CHECK
244-8832	[1]	TUBE AS
249-2334 Y	[1]	FILTER GP-OIL (ULTRA HIGH EFFICIENCY)
250-1425	[2]	ELBOW
270-1738	[1]	BRACKET
283-0024	[1]	BOSS
307-5393	[1]	VALVE GP-CHECK
315-5904	[1]	TUBE AS
330-9358 Y	[1]	FILTER GP-OIL (HYDRAULIC)
337-1008 Y	[1]	PUMP GP-PISTON
337-8768	[1]	TEE
348-4827	[1]	COUPLING

		(ABOVE PARTS ARE PART OF HYDRAULIC SYSTEM CONVERSION GROUP 314-9538)

5M-6214	[1]	PLUG (1/8-27 PTF)
5P-0597	[2]	CLAMP-HOSE
5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
5S-3919	[1]	HOSE
6V-3823 M	[4]	BOLT (M12X1.75X60-MM)
6V-6782	[1]	CLIP (SLOT)
6V-6783	[1]	CLIP (TAB)
8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
8T-4136 M	[3]	BOLT (M10X1.5X25-MM)
8T-4183 M	[1]	BOLT (M12X1.75X40-MM)
8T-4189 M	[1]	BOLT (M8X1.25X20-MM)
8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
8T-4987	[4]	CLAMP-HOSE
9L-3628	[1]	HOSE-REDUCER
9N-1941	[1]	CLAMP-V BAND
195-3068	[1]	EJECTOR AS
388-7017	[1]	CLAMP-BENT BOLT
241-9265	[1]	CLAMP-MUFFLER
243-1677	[1]	TUBE AS
253-1540	[1]	BRACKET AS
8T-3490 M	[5]	NUT-WELD (M10X1.5-THD)
314-7965	[1]	BRACKET
329-3356 M	[1]	NUT (M12X1.75-THD)
348-4828	[1]	TUBE AS
348-4829	[1]	BRACKET AS
5V-9221	[4]	SPACER (13.8X25X25-MM THK)
8T-3597 M	[1]	NUT-WELD (M12X1.75-THD)

		(ABOVE PARTS ARE PART OF AIR INLET & EXHAUST CONVERSION GROUP 314-9535)

7E-8630	[4]	HOSE-AIR INLET
7X-1443	[10]	PROTECTOR
7X-7729	[2]	WASHER (11X25X3-MM THK)
8T-0389 M	[4]	LOCKNUT (M10X1.5-THD)
8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
8T-4195 M	[4]	BOLT (M10X1.5X30-MM)
8T-4226	[2]	WASHER-PLATED (10.5X45X3-MM THK)
177-0035 M	[2]	U-BOLT (M10X1.5-THD)
208-7448	[10]	CLAMP
217-1601	[1]	HOSE-ELBOW
262-6848	[1]	TUBE
275-9368	[1]	BRACKET
275-9369	[1]	TUBE
275-9370	[1]	TUBE
276-1028	[1]	BRACKET AS
8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)

		(ABOVE PARTS ARE PART OF AIR LINES GROUP 236-8979)

7N-5974 Y	[1]	PRECLEANER GP
8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
133-9448 Y	[1]	AIR CLEANER GP

		(ABOVE PARTS ARE PART OF AIR CLEANER GROUP 114-8147)

8T-4182 M	[3]	BOLT (M10X1.5X45-MM)
7X-7729	[11]	WASHER (11X25X3-MM THK)
8T-6466 M	[4]	BOLT (M10X1.5X60-MM)
243-1675	[1]	MUFFLER AS
308-0951	[1]	SUPPORT AS
9X-8487 M	[1]	BOSS-WELD (M10X1.5X35-MM)
344-5675 M	[4]	NUT (M10X1.5-THD)
381-9503	[7]	SPACER (10.5X25X20-MM THK)

		(ABOVE PARTS ARE PART OF MUFFLER GROUP 237-9750)

D		ORDER BY THE METER
E		ORDER BY THE CENTIMETER
G		ORDER BY THE INCH
M		METRIC PART
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

Information:

MACHINE ARRANGEMENT

MACHINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

Improved Registration Process for Retrofit Products {1000, 7000}
2011/04/15

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Special Instruction

General Welding Procedures {0679, 7000}
General Welding Procedures {0679, 7000}

Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Installation of G610 Hardware for Cat® Terrain for Motor Graders, Wheel Dozers, and Wheel Loaders {7605}
Installation of G610 Hardware for Cat^® Terrain for Motor Graders, Wheel Dozers, and Wheel Loaders {7605}

Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
Installation Guide for the Tire Monitoring System on Cat^® and Non-Cat Equipment {4203, 7490}

Installation of Remote Disable Module (RDM) Kit on Cat® and Non-Cat Equipment {7606}
Installation of Remote Disable Module (RDM) Kit on Cat^® and Non-Cat Equipment {7606}

Installation Of Operator ID System on Cat® and Non-Cat Products {7600, 7610, 7620}
Installation Of Operator ID System on Cat^® and Non-Cat Products {7600, 7610, 7620}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS

Service Letter-Australia

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS

Service Letter-CFEL

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS

Service Letter-CSARL

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS

Service Letter-Americas

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS

Technical Information Bulletin

Lift Arm Fixtures Are Required When Installing New Crossmembers
Lift Arm Fixtures Are Required When Installing New Crossmembers

A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}

Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}

Tool Operating Manual

439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}

142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}

General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}
General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}

Zip-Tie Installation Guide{0374, 0599, 7000}
Zip-Tie Installation Guide{0374, 0599, 7000}

NEHS1259: 469-7632 Swing Gearbox Lifting Tool for 6015-6090 Hydraulic Mining Shovel {0629, 7000}
NEHS1259: 469-7632 Swing Gearbox Lifting Tool for 6015-6090 Hydraulic Mining Shovel {0629, 7000}

M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS

Service Letter-Asia

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS

Reuse And Salvage Guidelines

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS OR UPDATING SOFTWARE ON CERTAIN CATERPILLAR PRODUCTS

PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK PL121 SATELLITE RADIO SOFTWARE ON CERTAIN WHEEL DOZERS AND WHEEL LOADERS

Technical Analysis

Technical Analysis 1 (TA1) Visual Inspection for Wheel Loaders {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Wheel Loaders {0372, 1000, 7000, 753S, 7565}

Service Magazine

Changes To Oil Level Gauge Group Improve Accuracy Of Oil Level Indications, Increase Oil Capacity Of 245 Excavators And Front Shovels{1300}
1980/05/12

Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16

New Flywheel Housing Gasket For 3406 Machine Engines{1157}
1999/03/01

Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19

Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
2009/04/27

Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
2009/11/18

Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

An Improved 5P-8500 Key Is Now Available {1416, 1416, 7000, 7000}
2011/12/01

TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10

A New Tool Operating Manual for Proper Zip-Tie Installation Is Now Available for All Caterpillar Products {0374, 0599, 7000}
2015/08/10

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

New Service Information Content Is Now Available in Channel 1 {0374, 7000}
New Service Information Content Is Now Available in Channel 1 {0374, 7000}

A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog 980C :

Truck sale:

Caterpillar 980C
- Wheel Loaders
MICHIGAN CAT

29,900

Caterpillar 980C, Wheel Loaders, Construction

40,336

Caterpillar 980C, Wheel Loaders, Construction

Caterpillar 980C
- Wheel Loaders
MILTON CAT

18.500

Caterpillar 980C, Radlader, Bau-Und Bergbauausrüstung
- Wheel loaders
WYOMING MACHINERY