FUEL SYSTEM
VALVE GP-CHECKELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGINGWIRING GP
ELECTRONICS GP-ENGINE
CONVERSION GP
ELECTRICAL GP
HARNESS GP
FUEL SYSTEM
VALVE GP-CHECK
#SEBP55180130
281-2725: VALVE GP-CHECK
For full view, you need register
Parts for your 980C WHEEL LOADER:
CATERPILLAR SIS#SEBP55180131
235-7133: ALTERNATOR GP-CHARGING
235-7133 ALTERNATOR GP-CHARGING
S/N TXF1-UP; MHX9908-UP
24-VOLT, 80-AMPERE
PART OF 237-9767 ALTERNATOR GP-CHARGING
S/N TXF1-UP; MHX9908-UP
24-VOLT, 80-AMPERE
PART OF 237-9767 ALTERNATOR GP-CHARGING
For full view, you need register
Parts for your 980C WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 228-9656 | [1] | FRAME AS-DRIVE END | |
| 2. | 5S-7349 | [1] | BOLT (1/4-20X0.5-IN) | |
| 3. | 185-2639 | [1] | FAN AS | |
| 4. | 1H-3244 | [1] | LOCKWASHER | |
| 5. | 228-9655 | [1] | FRAME AS-ALTERNATOR | |
| 6. | 2K-4821 | [1] | LOCKNUT (5/8-18-THD) | |
| 7. | 5P-8247 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 8. | 228-9657 | [1] | COVER AS | |
| 9. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 10. | 185-2647 | [1] | GROMMET | |
| 11. | 9L-6770 | [1] | CAP-DUST | |
| 12. | 423-2775 | [1] | STATOR AS (24-VOLT, 95-AMPERE) | |
| 13. | 185-2638 | [2] | COLLAR | |
| 14. | 185-2654 | [1] | PLATE | |
| 15. | 185-2650 | [1] | ROTOR AS | |
| 16. | 185-2644 | [1] | COIL AS | |
| 17. | 185-2648 | [1] | REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR) | |
| 18. | 6V-8189 | [1] | NUT (5/16-18-THD) | |
| 19. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 20. | 3F-9556 | [1] | LOCKWASHER | |
| AVAILABLE REPAIR KIT(S): | ||||
| 185-2655 | [1] | KIT-BEARING (ALTERNATOR) | ||
| (INCLUDES 3 BEARINGS) | ||||
| 185-2658 | [1] | KIT-HARDWARE (ALTERNATOR AIR) | ||
| (INCLUDES BOLTS) | ||||
| 199-7891 | [1] | KIT-TERMINAL (ALTERNATOR AIR) | ||
| (INCLUDES INSULATORS, WASHERS, NUT & STEP NUT) | ||||
| 199-8436 | [1] | KIT-TERMINAL (ALTERNATOR AIR) | ||
| (INCLUDES HOLDER AS, PLATE, INSULATOR, PIN, BOLT, GROMMET,& NUT) | ||||
#SEBP55180132
237-9767: ALTERNATOR GP-CHARGING
For full view, you need register
Parts for your 980C WHEEL LOADER:
CATERPILLAR SIS#SEBP55180133
227-4283: BRACKET GP-MOUNTING
227-4283 BRACKET GP-MOUNTING -MESSENGER DISPLAY
S/N 8CJ1-UP; 63X1-UP
PART OF 344-9060 ELECTRICAL AR
S/N 8CJ1-UP; 63X1-UP
PART OF 344-9060 ELECTRICAL AR
For full view, you need register
Parts for your 980C WHEEL LOADER:
CATERPILLAR SIS#SEBP55180134
251-7610: CONNECTION GP-ELECTRICAL
251-7610 CONNECTION GP-ELECTRICAL
S/N TXF1-UP; MHX9908-UP
S/N TXF1-UP; MHX9908-UP
For full view, you need register
Parts for your 980C WHEEL LOADER:
CATERPILLAR SIS#SEBP55180135
233-6191: CONTROL & MTG GP-ENGINE ELEK
233-6191 CONTROL & MTG GP-ENGINE ELEK
S/N TXF1-UP; MHX9908-UP
S/N TXF1-UP; MHX9908-UP
For full view, you need register
Parts for your 980C WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 2. | 9X-2098 CM | [4] | STUD-TAPERLOCK (BOLT) | |
| 3. | 226-7473 Y | [1] | CONTROL GP-ENGINE ELECTRONIC | |
| 5. | 233-0891 | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 232-1693 M | [1] | BOLT-FLANGE HEAD (M6X1X35-MM) | ||
| 6. | 6I-1418 | [4] | SPACER (8.2X12.7X28.7-MM THK) | |
| 7. | 9N-0869 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP55180136
226-7473: CONTROL GP-ENGINE ELECTRONIC
226-7473 CONTROL GP-ENGINE ELECTRONIC
S/N TXF1-UP; MHX9908-UP
PART OF 233-6191 CONTROL & MTG GP-ENGINE ELEK
S/N TXF1-UP; MHX9908-UP
PART OF 233-6191 CONTROL & MTG GP-ENGINE ELEK
For full view, you need register
Parts for your 980C WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 478-7932 | [1] | CONTROL GP-ELECTRONIC (ENGINE) | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP55180137
314-9534: CONVERSION GP-ELECTRICAL
314-9534 CONVERSION GP-ELECTRICAL -REPOWER
S/N 8CJ1-UP; 63X1-UP
PART OF 314-9532 CONVERSION AR-MACHINE
FOR USE WITH 980C & 980F TIER 3 REPOWER
S/N 8CJ1-UP; 63X1-UP
PART OF 314-9532 CONVERSION AR-MACHINE
FOR USE WITH 980C & 980F TIER 3 REPOWER
For full view, you need register
Parts for your 980C WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 207-1759 Y | [1] | PEDAL GP-GOVERNOR | ||
| 145-7028 Y | [1] | SENSOR GP-TEMPERATURE (HYDRAULIC OIL TEMP) | ||
| 3E-8700 Y | [2] | SENSOR GP-TEMPERATURE | ||
| 369-0809 Y | [1] | STARTING MOTOR GP-ELECTRIC | ||
| 158-6634 Y | [1] | SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN) | ||
| 5P-6944 | [2] | ADAPTER | ||
| 164-3651 | [1] | ADAPTER | ||
| 6T-3643 | [1] | CIRCUIT BREAKER AS (15-AMPERE) | ||
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 3Y-2888 | [1] | CONNECTOR | ||
| 109-0361 | [1] | FILM-INSTRUCTION (ENGINE SHUTDOWN) | ||
| 3E-5169 | [1] | GUARD-SWITCH | ||
| 218-0400 | [2] | HARNESS AS-SENSOR | ||
| (EACH INCLUDES) | ||||
| 102-8803 | KIT-RECEPTACLE (3-PIN) | |||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 E | SLEEVE (8-CM) | |||
| 362-4870 | [1] | HARNESS AS-CAB | ||
| 227-6731 | KIT-RECEPTACLE (12-PIN) | |||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 274-3778 | [1] | CAP-SEAL | ||
| 180-9339 | [20] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 9X-3401 | PIN-CONNECTOR (16-GA TO 18-GA) | |||
| 126-1767 | PIN-CONNECTOR (14-GA TO 16-GA) | |||
| 9X-3402 | SOCKET-CONNECTOR (16-GA TO 18-GA) | |||
| 126-1768 | SOCKET-CONNECTOR (14-GA TO 16-GA) | |||
| 180-9900 | CAP AS | |||
| 5P-7958 | [1] | SLEEVE-CABLE SPLICE | ||
| 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | ||
| 179-9392 | [1] | LANYARD | ||
| 202-5397 | [5] | PLUG | ||
| 204-1297 | [5] | TERMINAL AS-BLADE (18-GA TO 20-GA) | ||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR | ||
| 155-2265 | KIT-CONNECTING PLUG (8-PIN) | |||
| 155-2260 | KIT-CONNECTING PLUG (3-PIN) | |||
| 155-2271 | KIT-CONNECTING PLUG (4-PIN) | |||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM) | |||
| 130-6789 | [1] | TERMINAL AS-BLADE | ||
| 5P-6006 B | TUBE-HEAT SHRINK (9.52-MM DIA) | |||
| 5P-4571 | [1] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 6V-2689 B | TUBE-HEAT SHRINK (6.35-MM DIA) | |||
| 131-1506 | [1] | TERMINAL AS | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(3-CM) | |||
| 2L-8079 | [1] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 131-1508 | [1] | TERMINAL AS | ||
| 5P-2766 | [1] | TERMINAL-RING (18-GA TO 22-GA, NO. 6 SCREW) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(3-CM) | |||
| 102-8802 | KIT-RECEPTACLE (2-PIN) | |||
| 102-8804 | KIT-RECEPTACLE (4-PIN) | |||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3S-2093 | [5] | STRAP-CABLE | ||
| 8T-8737 | [15] | PLUG-SEAL | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(45-CM) | |||
| 362-4869 | [1] | HARNESS AS-ENGINE | ||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 180-9340 | [67] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| (EACH INCLUDES) | ||||
| 9X-3402 | [1] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 126-1768 | [1] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 230-4013 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 274-3774 | [8] | CAP-CONNECTOR | ||
| 274-3775 | [2] | CAP-CONNECTOR | ||
| 131-1498 | [2] | TERMINAL AS | ||
| (EACH INCLUDES) | ||||
| 2L-8069 | [1] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 6H-3595 E | [1] | TERMINAL-RING (10-GA TO 12-GA, 3/8-IN SCREW)(4-CM) | ||
| 125-7875 | TUBE-HEAT SHRINK (7.44-MM DIA) | |||
| 131-1503 | [4] | TERMINAL AS-RING | ||
| (EACH INCLUDES) | ||||
| 2L-8076 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 6H-3594 | [1] | TERMINAL-SOLDER | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(3-CM) | |||
| 131-1506 | [2] | TERMINAL AS | ||
| (EACH INCLUDES) | ||||
| 2L-8079 | [1] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 8M-0537 | [1] | TERMINAL | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(3-CM) | |||
| 131-1507 | [1] | TERMINAL AS-RING | ||
| 2L-8081 | [1] | TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW) | ||
| [1] | RING-TERMINAL | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(3-CM) | |||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR | ||
| 155-2257 | KIT-CONNECTING PLUG (12-PIN) | |||
| 155-2260 | KIT-CONNECTING PLUG (3-PIN) | |||
| 155-2270 | KIT-CONNECTING PLUG (2-PIN) | |||
| 155-2271 | KIT-CONNECTING PLUG (4-PIN) | |||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(5-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(65-CM) | |||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(5-CM) | |||
| 126-1768 E | [12] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 131-1487 | [1] | TERMINAL AS (6-GA TO 8-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM) | |||
| 2L-8049 | [1] | TERMINAL-RING (6-GA, NO. 10 SCREW) | ||
| 2L-8057 | [1] | TERMINAL-RING (8-GA, NO. 10 SCREW) | ||
| 131-1491 | [1] | TERMINAL AS | ||
| 3T-4692 | [1] | TERMINAL-RING (6-GA, 7/16-IN SCREW) | ||
| 3T-4693 | [1] | TERMINAL-RING (8-GA, 7/16-IN SCREW) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM) | |||
| 131-1492 | [1] | TERMINAL AS-RING (6-GA TO 8-GA) | ||
| 2L-8054 | [1] | TERMINAL-RING (6-GA, 1/2-IN SCREW) | ||
| 2L-8061 | [1] | TERMINAL-RING (8-GA, 1/2-IN SCREW) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM) | |||
| 131-1494 | [1] | TERMINAL AS | ||
| 2D-8758 | [1] | TERMINAL | ||
| 2L-8065 | [1] | TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(4-CM) | |||
| 8N-1544 | [1] | PIN-CONNECTOR (8-GA) | ||
| 8N-1545 | [1] | SOCKET-CONNECTOR (8-GA) | ||
| 8N-1548 | [2] | PIN-CONNECTOR (4-GA) | ||
| 8N-1549 | [2] | SOCKET-CONNECTOR (4-GA) | ||
| 8T-8737 | [41] | PLUG-SEAL | ||
| 8T-8827 | [2] | BOOT (RED) | ||
| 9X-4997 | [1] | TERMINAL AS | ||
| 9X-4998 | [1] | SOCKET (14-GA TO 16-GA) | ||
| 9X-6772 | [3] | STRAP-CABLE | ||
| 9X-6856 | [14] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-6857 | [14] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [17] | STRAP-CABLE | ||
| 7G-7917 | [2] | PLUG-SEAL | ||
| 7G-7918 | [1] | PLUG-SEAL | ||
| 7G-7919 | [2] | PLUG-SEAL | ||
| 8N-1517 | [1] | RECEPTACLE AS-CONNECTOR (25-PIN) | ||
| 8N-1518 | [1] | PLUG AS-CONNECTOR (25-PIN) | ||
| 8N-1521 | [1] | BELL AS-END | ||
| 8N-1523 | [1] | LOCKWASHER | ||
| 8N-1540 | [3] | PIN-CONNECTOR (12-GA TO 14-GA) | ||
| 8N-1541 | [3] | SOCKET-CONNECTOR (12-GA TO 14-GA) | ||
| 209-8441 | [1] | HARNESS AS-PUMP (FUEL PRIMING) | ||
| 102-8802 | KIT-RECEPTACLE (2-PIN) | |||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9G-3695 | [1] | PLUG-SEAL | ||
| 114-8843 E | SLEEVE-PLASTIC (60-CM) | |||
| 126-1766 | [4] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| (EACH INCLUDES) | ||||
| 9X-3402 | SOCKET-CONNECTOR (16-GA TO 18-GA) | |||
| 126-1768 | SOCKET-CONNECTOR (14-GA TO 16-GA) | |||
| 144-1636 | [2] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| (EACH INCLUDES) | ||||
| 9X-3401 | PIN-CONNECTOR (16-GA TO 18-GA) | |||
| 126-1767 | PIN-CONNECTOR (14-GA TO 16-GA) | |||
| 155-2260 | KIT-CONNECTING PLUG (3-PIN) | |||
| 155-2270 | KIT-CONNECTING PLUG (2-PIN) | |||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 332-3972 | [1] | LAMP AS-INDICATOR (12/24-VOLT, AMBER) | ||
| 270-2679 | [1] | LOCKWASHER | ||
| 203-9007 | [1] | NUT (1-1/2-18-THD) | ||
| 3J-1907 | [4] | SEAL-O-RING | ||
| 6V-6609 | [3] | SEAL-O-RING | ||
| 7J-0204 | [1] | SEAL-O-RING | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 8N-3844 | [1] | SENDER-TEMPERATURE | ||
| 274-6717 | [1] | SENSOR-PRESSURE | ||
| 180-9340 | [4] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| (EACH INCLUDES) | ||||
| 9X-3402 | [1] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 126-1768 | [1] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 107-0616 | [1] | SWITCH AS-PRESSURE (FUEL) | ||
| 102-8802 | KIT-RECEPTACLE (2-PIN) | |||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 130-7459 | [1] | SWITCH AS-PRESSURE (ENGINE OIL) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 107-0616 | [1] | SWITCH AS-PRESSURE (FUEL) | ||
| 102-8802 | KIT-RECEPTACLE (2-PIN) | |||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 110-7887 | [1] | SWITCH AS-START (KEY) | ||
| 7T-6799 | [1] | NUT-MOUNTING (1-32-THD) | ||
| 5P-8514 | [1] | LOCK AS-CYLINDER | ||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 3E-6451 | [1] | SWITCH GP-TEMPERATURE | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 170-0966 | [1] | TEE AS | ||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 8C-3415 | [1] | TEE | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP55180138
344-9060: ELECTRICAL AR
344-9060 ELECTRICAL AR
S/N 8CJ1-UP; 63X1-UP
THIS ARRANGEMENT CONTAINS THE OPTIONAL ELECTRICAL COMPONENTS THAT ARE COMPATIBLE WITH AN EMISSIONS REPOWER
PART OF 314-9540 CONVERSION AR-MACHINE
S/N 8CJ1-UP; 63X1-UP
THIS ARRANGEMENT CONTAINS THE OPTIONAL ELECTRICAL COMPONENTS THAT ARE COMPATIBLE WITH AN EMISSIONS REPOWER
PART OF 314-9540 CONVERSION AR-MACHINE
For full view, you need register
Parts for your 980C WHEEL LOADER:
CATERPILLAR SIS#SEBP55180139
362-4870: HARNESS AS-CAB
For full view, you need register
Parts for your 980C WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8804 | [2] | KIT-RECEPTACLE (4-PIN) | ||
| 227-6731 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| 245-7434 | [1] | KIT-CONNECTING PLUG (10-PIN) | ||
| 155-2271 | [3] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 274-3778 | [1] | CAP-SEAL | ||
| 3S-2093 | [5] | STRAP-CABLE | ||
| 8T-8737 | [15] | PLUG-SEAL | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(45-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM) | |||
| 5P-4571 | [1] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 2L-8079 | [1] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 5P-2766 | [1] | TERMINAL-RING (18-GA TO 22-GA, NO. 6 SCREW) | ||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR | ||
| 9X-3401 | [20] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [20] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 194-5226 | [22] | WIRE AS (16-GA) | ||
| -OR- | ||||
| 194-5227 | [22] | WIRE AS (14-GA) | ||
| 180-9900 | [1] | CAP AS | ||
| 5P-7958 | [1] | SLEEVE-CABLE SPLICE | ||
| 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | ||
| 179-9392 | [1] | LANYARD | ||
| 185-1861 | [5] | SEAL-WIRE | ||
| 204-1297 | [5] | TERMINAL AS-BLADE (18-GA TO 20-GA) | ||
| (EACH INCLUDES) | ||||
| 235-4123 | [1] | TERMINAL (18-GA TO 20-GA) | ||
| 265-4123 | [1] | RECEPTACLE AS-CONNECTOR (9-PIN) | ||
| E | ORDER BY THE CENTIMETER | |||
Information:
FUEL SYSTEM
VALVE GP-CHECK
Service Magazine
