AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

332-0045 TURBOCHARGER GP S/N LJW5431-UP PART OF 332-6792 TURBOCHARGER GP 777C TRUCK


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
EXHAUST GP
FUEL SYSTEM
FILTER GP-FUEL
LINES GP-FUEL INJECTION
LINES GP-FUEL

TRUCK 777C TRUCK 4XJ
 C32 Engine Emissions Retrofit Repower Tier II for 777B/C Truck 4XJ00001-UP (MACHINE) SEBP5522 777C 4XJ   (1992)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
LINES GP-TURBOCHARGER OIL
217-5677 LINES GP-TURBOCHARGER OIL
425-3709 KIT-TURBOCHARGER ACTUATOR
SHIELD GP-HEAT
234-4919 SHIELD GP-HEAT
SHIELD GP-HEAT
243-3864 SHIELD GP-HEAT
TURBOCHARGER GP
332-0045 TURBOCHARGER GP
TURBOCHARGER GP
332-0046 TURBOCHARGER GP
TURBOCHARGER GP
332-6792 TURBOCHARGER GP
TURBOCHARGER GP
332-6792 TURBOCHARGER GP
 

#SEBP55220120
 

332-0045: TURBOCHARGER GP

332-0045 TURBOCHARGER GP
S/N LJW5431-UP
PART OF 332-6792 TURBOCHARGER GP
i03497765 SEBP5522
3320045 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 777C TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-2038 [1] CLAMP AS-TURBINE  
2. 268-2960 [1] CLAMP AS (COMPRESSOR)  
3. 302-1409 [1] CARTRIDGE GP-TURBOCHARGER  
4. 5M-6214 [1] PLUG (1/8-27 PTF)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP55220121
 

332-0046: TURBOCHARGER GP

332-0046 TURBOCHARGER GP
S/N LJW5431-UP
PART OF 332-6792 TURBOCHARGER GP
i03497780 SEBP5522
3320046 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 777C TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-2038 [1] CLAMP AS-TURBINE  
2. 268-2960 [1] CLAMP AS (COMPRESSOR)  
3. 302-1409 [1] CARTRIDGE GP-TURBOCHARGER  
4. 5M-6214 [1] PLUG (1/8-27 PTF)  
5. 268-0122 [1] HOUSING AS-TURBINE  
   
    AVAILABLE REPAIR KIT(S):
  425-3709 Y [1] KIT-TURBOCHARGER ACTUATOR  
    INCLUDES ACTUATOR , ROD END, NUTS, RETAINER, BRACKET, BOLTS,INSTRUCTIONS,HEAT SHIELD & CLAMP HOSE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP55220122
 

332-6792: TURBOCHARGER GP

332-6792 TURBOCHARGER GP
S/N LJW5431-UP
Type 1
i03497761 SEBP5522
3326792 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 777C TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1S-4295 [2] GASKET (TURBOCHARGER)  
2. 114-9223 [2] SPACER (11.13X19.05X19-MM THK)  
3. 332-0045 Y [1] TURBOCHARGER GP  
4. 332-0046 Y [1] TURBOCHARGER GP  
5. 2N-2765 [6] BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN)  
6. 2N-2766 [8] LOCKNUT (3/8-16-THD)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP55220123
 

332-6792: TURBOCHARGER GP

332-6792 TURBOCHARGER GP
S/N LJW5431-UP
Type 2
i05341389 SEBP5522
3326792 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 777C TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 357-1752 C [2] GASKET-TURBOCHARGER  
2. 391-2167 C [8] LOCKNUT-FLANGE (3/8X16-THD)  
3. 332-0045 Y [1] TURBOCHARGER GP  
4. 332-0046 Y [1] TURBOCHARGER GP  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP55220124
 

347-5852: CONVERSION GP-AIR INLET & EXH

347-5852 CONVERSION GP-AIR INLET & EXH
S/N 4YC1-UP; 4XJ1-UP
PART OF 347-5856 CONVERSION AR-MACHINE
i04364339 SEBP5522
  For full view, you need register

Parts for your 777C TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  347-5846 Y [1] LINES GP-AIR  
  347-5838 Y [1] PIPE GP-EXHAUST  
  234-4919 Y [1] SHIELD GP-HEAT (TURBOCHARGER)  
  384-8329 Y [1] LINES GP-AIR  
   
  0T-0102 [8] BOLT (3/8-16X0.625-IN)  
  2W-4474 [4] BRACKET  
  5J-3306 [2] FITTING (9/16-18-THD)  
  2N-2766 [8] LOCKNUT (3/8-16-THD)  
  6N-9533 [2] SHIELD AS-HEAT  
  6B-2882 [8] SPACER (0.406X0.75X0.312-IN THK)  
  114-9223 [8] SPACER (11.13X19.05X19-MM THK)  
  5M-2894 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  9X-6458 [8] WASHER-HARD (10.2X22.5X3-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP55220125
 

174-9570: FILTER GP-WATER SEP & FUEL

174-9570 FILTER GP-WATER SEP & FUEL
S/N 4YC1-UP; 4XJ1-UP
PART OF 190-8977 PUMP GP-FUEL PRM & WATER SEP
i01515678 SEBP5522
1749570 FILTER GP-WATER SEP & FUEL Parts scheme
  For full view, you need register

Parts for your 777C TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 326-1644 [1] FILTER AS-WATER SEP & FUEL (PRIMARY)  
1A. 220-8678 [1] SEAL-RING (FUEL, WATER SEPARATOR)  
2. 343-5527 [1] BOWL AS  
2A. 5F-9144 [1] SEAL-O-RING  
2B. 8F-7219 [1] SEAL-O-RING  
 

#SEBP55220126
 

253-0615: INJECTOR GP-FUEL

253-0615 INJECTOR GP-FUEL
S/N LJW5431-UP
PART OF 235-1401 PUMP GP-FUEL INJECTION
i04972536 SEBP5522
2530615 INJECTOR GP-FUEL Parts scheme
  For full view, you need register

Parts for your 777C TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 230-3728 [1] SEAL-O-RING  
2. 230-3775 [1] SEAL-O-RING  
3. 9X-7317 [1] SEAL-O-RING  
 

#SEBP55220127
 

374-0750: INJECTOR GP-FUEL

374-0750 INJECTOR GP-FUEL
S/N LJW5431-UP
PART OF 235-1401 PUMP GP-FUEL INJECTION
i05200588 SEBP5522
3740750 INJECTOR GP-FUEL Parts scheme
  For full view, you need register

Parts for your 777C TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 230-3728 [1] SEAL-O-RING  
2. 230-3775 [1] SEAL-O-RING  
3. 9X-7317 [1] SEAL-O-RING  
 

#SEBP55220128
 

248-7695: LINES GP-FUEL

248-7695 LINES GP-FUEL
S/N 4YC1-UP; 4XJ1-UP
PART OF 347-5845 INSTALLATION GP-ENGINE
i03127264 SEBP5522
2487695 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 777C TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-9655 [8] MOUNT-ISOLATION  
2. 160-0564 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
3. 165-5970 Y [1] SWITCH GP-TOGGLE (FUEL PRIMING PUMP ON, OFF)  
4. 183-5960 [1] ELBOW AS  
  030-7944 [1] ELBOW  
  3D-2824 [1] SEAL-O-RING  
5. 190-8977 Y [1] PUMP GP-FUEL PRM & WATER SEP (PRIMARY FUEL FILTER)  
6. 191-1782 [1] SPACER (8.5X12.7X38.2-MM THK)  
7. 201-4340 [2] PLUG AS  
    (EACH INCLUDES)
  9S-8006 [1] PLUG (7/8-14-THD)  
  6V-4589 [1] SEAL-O-RING  
9. 232-1374 [1] BRACKET  
10. 232-1376 [2] SPACER (8.5X12.7X139.1-MM THK)  
11. 252-5703 I [1] HOSE AS  
12. 304-0416 [1] BRACKET AS  
13. 304-7602 I [1] HOSE AS  
14. 305-3502 I [1] HOSE AS  
15. 305-3503 I [1] HOSE AS  
16. 316-8207 CI [1] HOSE AS  
17. 328-4373 [1] COVER AS  
  2G-9524 [1] LATCH  
  9M-5732 [4] RIVET-POP  
18. 030-8188 [1] CONNECTOR  
19. 061-9258 [1] TEE  
20. 148-8315 [1] CONNECTOR AS  
  6V-8642 [1] CONNECTOR  
  2M-9780 [1] SEAL-O-RING  
  7J-9108 [1] SEAL-O-RING  
21. 153-6233 [1] UNION AS  
  6V-8732 [1] UNION  
  7J-9108 [2] SEAL-O-RING  
22. 155-3504 [1] ELBOW AS  
  2M-9780 [1] SEAL-O-RING  
  6V-9003 [1] ELBOW  
  7J-9108 [1] SEAL-O-RING  
24. 1S-0994 C [4] CLIP (LOOP)  
25. 2M-9780 [1] SEAL-O-RING  
26. 3K-0360 [1] SEAL-O-RING  
27. 4J-4710 [1] SPACER (0.492X0.675X4-IN THK)  
29. 6D-1641 [11] CLIP (LOOP)  
30. 6V-8398 C [1] SEAL-O-RING  
31. 7K-1181 C [1] STRAP-CABLE  
32. 7X-0294 C [3] BOLT (3/8-16X5-IN)  
33. 7X-0579 [3] WASHER-HARD (8.8X25.5X2-MM THK)  
34. 7X-7729 [13] WASHER (11X25X3-MM THK)  
35. 8K-6686 [1] ELBOW-FLARED  
36. 8S-4950 [1] CAP (FLARED 37-DEG)  
37. 8T-2270 [1] CONNECTOR-EXTENSION  
38. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
39. 8T-4136 CM [12] BOLT (M10X1.5X25-MM)  
40. 8T-4185 M [1] BOLT (M10X1.5X50-MM)  
41. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
42. 5P-1075 C [3] WASHER-HARD (10.2X22.5X3-MM THK)  
43. 8T-6466 M [1] BOLT (M10X1.5X60-MM)  
44. 8T-6869 M [1] BOLT (M8X1.25X60-MM)  
45. 8T-7352 M [2] BOLT (M8X1.25X160-MM)  
46. 9L-5254 [1] ELBOW  
47. 9W-1991 [1] SPACER (10.7X17.1X40-MM THK)  
48. 9X-8250 C [4] CLIP  
49. 8C-6959 E HOSE (36-CM)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP55220129
 

347-5851: LINES GP-FUEL

347-5851 LINES GP-FUEL
S/N LJW5431-8138
PART OF 347-5835 ENGINE AR-COMPLETE
i04257830 SEBP5522
3475851 LINES GP-FUEL Parts scheme 3475851 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 777C TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-0318 [2] BRACKET  
2. 3K-1470 [1] SPACER (0.4X1X0.38-IN THK)  
3. 4P-0707 [6] CLAMP AS  
    (EACH INCLUDES)
  307-8373 [1] GROMMET  
4. 6L-2479 [2] BRACE  
5. 7F-2050 [1] LOCKNUT (3/4-16-THD)  
6. 7W-9094 [2] SPACER (11X20X9-MM THK)  
7. 120-4351 [1] PLATE  
8. 127-5447 [1] SPACER (10.5X20X12-MM THK)  
9. 142-3331 [1] BRACKET AS  
10. 236-4185 [1] PLATE  
11. 281-4698 I [1] HOSE AS  
12. 281-6931 [1] TUBE AS  
13. 299-9606 [1] PLATE AS  
14. 304-7619 [1] BRACKET  
15. 314-3173 [1] MANIFOLD  
16. 314-3174 [1] BRACKET AS  
17. 322-7615 I [1] HOSE AS  
18. 322-7616 I [2] HOSE AS  
19. 322-7617 I [1] HOSE AS  
20. 327-4448 Y [1] VALVE GP-CHECK (FUEL PRESSURE REGULATING)  
21. 118-4728 [1] ELBOW  
22. 0L-1143 [3] BOLT (3/8-16X2.5-IN)  
23. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
24. 0S-0509 [2] BOLT (3/8-16X0.75-IN)  
25. 0S-1571 [1] BOLT (3/8-16X1.75-IN)  
26. 0S-1591 [1] BOLT (3/8-16X1.5-IN)  
27. 0S-1594 [1] BOLT (3/8-16X1-IN)  
28. 0S-1619 [2] BOLT (3/8-16X3-IN)  
29. 0T-0320 [2] BOLT (7/16-14X1.25-IN)  
30. 136-7227 [1] SEAL-O-RING  
31. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
32. 1A-5183 [2] BOLT (3/8-16X4.75-IN)  
33. 1P-1376 [4] CONNECTOR-PORT  
34. 214-7568 [6] SEAL-O-RING  
35. 238-4664 [1] STUD (3/8-16-THD)  
36. 2K-4973 [1] LOCKNUT (3/8-16-THD)  
37. 2P-7213 [1] TEE-BULKHEAD  
38. 2R-6806 [2] CONNECTOR  
39. 3E-4353 [1] WASHER-HARD (11X25X3-MM THK)  
40. 3G-8047 [1] GROMMET  
41. 3G-8054 [1] CLIP (TAB)  
42. 3G-8057 [1] CLIP (SLOT)  
43. 3S-1546 [1] NUT-FULL (7/16-14-THD)  
44. 5M-2894 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
45. 5P-7464 [1] CLIP (SLOT)  
46. 5P-7465 [1] CLIP (TAB)  
47. 5P-8244 [3] WASHER-HARD (12X22.5X2.5-MM THK)  
48. 6V-1249 [1] GROMMET (22-MM ID)  
49. 6V-1820 M [1] BOLT (M10X1.5X30-MM)  
50. 6Y-1352 [2] SPACER (10.5X20X27-MM THK)  
51. 7V-6571 [6] GROMMET  
52. 8K-6686 [1] ELBOW-FLARED  
53. 8L-2786 [2] SEAL-O-RING  
54. 8S-9191 [3] BOLT (3/8-16X4-IN)  
55. 8T-1889 [6] CLIP (SLOT)  
56. 8T-1890 [6] CLIP (TAB)  
57. 9L-9166 [1] STUD (3/8-16X3.63-IN)  
58. 9S-8005 [1] PLUG (3/4-16-THD)  
59. 9S-8752 [9] NUT-FULL (3/8-16-THD)  
60. 9X-6458 [23] WASHER-HARD (10.2X22.5X3-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Service Letter-NACD
Product Support Program For Installing Air Compressor Inlet Valve Springs On Certain 777, 785, 789, And 793 Trucks, 994 Wheel Loaders, 5130 And 5230 Excavators, And 3508, 3512, And 3516 Engines
Product Support Program For Installing Air Compressor Inlet Valve Springs On Certain 777, 785, 789, And 793 Trucks, 994 Wheel Loaders, 5130 And 5230 Excavators, And 3508, 3512, And 3516 Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Specifications
Turbocharger
3508 EUI Engine for Off-Highway Truck/Tractors
Turbocharger Outlet Pressure Sensor
3508 EUI Engine for Off-Highway Truck/Tractors
Turbocharger Inlet Pressure Sensor
3508 EUI Engine for Off-Highway Truck/Tractors
Turbocharger
3508 EUI Engine for Off-Highway Truck/Tractors
Service Letter-China
Product Support Program For Installing Air Compressor Inlet Valve Springs On Certain 777, 785, 789, And 793 Trucks, 994 Wheel Loaders, 5130 And 5230 Excavators, And 3508, 3512, And 3516 Engines
Product Support Program For Installing Air Compressor Inlet Valve Springs On Certain 777, 785, 789, And 793 Trucks, 994 Wheel Loaders, 5130 And 5230 Excavators, And 3508, 3512, And 3516 Engines
Service Letter-Asia
Systems Operation
Turbocharger
3508 EUI Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Product Support Program For Installing Air Compressor Inlet Valve Springs On Certain 777, 785, 789, And 793 Trucks, 994 Wheel Loaders, 5130 And 5230 Excavators, And 3508, 3512, And 3516 Engines
Product Support Program For Installing Air Compressor Inlet Valve Springs On Certain 777, 785, 789, And 793 Trucks, 994 Wheel Loaders, 5130 And 5230 Excavators, And 3508, 3512, And 3516 Engines
Disassembly and Assembly
Turbochargers
3508 EUI ENGINE FOR 776C TRACTOR AND 777C TRUCK
Turbocharger - Remove
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Turbocharger - Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Turbocharger - Disassemble
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Turbocharger - Assemble
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Turbocharger - Remove
C27 and C32 Engines for Caterpillar Built Machines
Turbocharger - Disassemble
C27 and C32 Engines for Caterpillar Built Machines
Turbocharger - Assemble
C27 and C32 Engines for Caterpillar Built Machines
Turbocharger - Install
C27 and C32 Engines for Caterpillar Built Machines
Turbocharger - Remove
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Turbocharger - Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines
Turbocharger - Remove
C27 and C32 Engines for Caterpillar Built Machines
Turbocharger - Install
C27 and C32 Engines for Caterpillar Built Machines
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
New Hose Assemblies Used In Turbocharger Oil Lines Groups{1307}
1994/07/11
Flexible Hose Assembly Replaces Tube Assemblies In Turbocharger Water Lines Groups{1380}
1994/12/05
Flexible Braided Steel Hose Maintenance {1307,1380,1803}
1995/07/03
New Hose Assemblies Used In Turbocharger Oil Lines Groups {1307}
1996/01/29
New Vee Band Clamp For Turbocharger Exhaust Couplings Reduces Exhaust Leaks {1052}
1996/04/01
Remember To Apply 5P-3931 Anti-Seize Compound To The Threads Of The Bolts And/Or Studs That Fasten The Turbocharger To The Exhaust Manifold {1052}
2001/10/08
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/09
A Previous High Temperature Locknut is Used in 3500 and 3500B Machine Engine Exhaust System Groups {1050, 1052, 1059, 1071}
2003/07/14
Policy for Reusing the Turbocharger Turbine Housing {1065}
2003/07/14
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/15
Correct Installation of the Oil Drain Lines for the Center Mounted Turbochargers {1052, 1307}
2004/03/08
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2004/12/20
New Oil Drain Tube for the Turbocharger {1052, 1307}
2006/01/30
Packaging the Turbocharger {1052}
2007/02/26
New Hardware Is Used for the Water Lines on Some 3500 Machine Engines {1052, 1380}
2009/10/16
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Machine Applications {1000, 1052, 1053, 1210, 1251, 1252, 1254, 1265, 1290, 1405, 1713, 1901, 7490, 7610, 7620}
2015/07/21
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 777C :

SUPPORT GP-AFTERCOOLER
347-5850 SUPPORT GP-AFTERCOOLER
SHIELD GP-HEAT
243-3864 SHIELD GP-HEAT
SHIELD GP-HEAT
234-4919 SHIELD GP-HEAT
PIPE GP-EXHAUST
347-5838 PIPE GP-EXHAUST
MANIFOLD GP-EXHAUST
253-2633 MANIFOLD GP-EXHAUST
LINES GP-AIR
384-8329 LINES GP-AIR
LINES GP-AIR
347-5846 LINES GP-AIR
LINES GP-AIR
277-0646 LINES GP-AIR
TURBOCHARGER GP
332-0046 TURBOCHARGER GP
TURBOCHARGER GP
332-6792 TURBOCHARGER GP
TURBOCHARGER GP
332-6792 TURBOCHARGER GP
347-5852 CONVERSION GP-AIR INLET & EXH
FILTER GP-WATER SEP & FUEL
174-9570 FILTER GP-WATER SEP & FUEL
INJECTOR GP-FUEL
253-0615 INJECTOR GP-FUEL
INJECTOR GP-FUEL
374-0750 INJECTOR GP-FUEL
LINES GP-FUEL
248-7695 LINES GP-FUEL

Truck sale:

Caterpillar 777C, Construction
 
Caterpillar 777C, Construction
- Articulated Dump Trucks (ADTs)
CARTER MACHINERY COMPANY, INC.
Caterpillar 777C, Construction
 
Caterpillar 777C, Construction
- Articulated Dump Trucks (ADTs)
CARTER MACHINERY COMPANY, INC.
Caterpillar 777C, Construction
 
Caterpillar 777C, Construction
- Articulated Dump Trucks (ADTs)
CARTER MACHINERY COMPANY, INC.
CATERPILLAR 777C 1993
 
CATERPILLAR 777C 1993
- OFF HIGHWAY TRUCKS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
CAT 777C
USD $44,800 
CAT 777C

CTS Plant Services
Leeds, United Kingdom
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.