145-9133 HOUSING GP-FRONT S/N TXC1-UP; 41Z1-UP 980G WHEEL LOADER

145-9133 HOUSING GP-FRONT
S/N TXC1-UP; 41Z1-UP

i04846729 SEBP5527

For full view, you need register

Parts for your 980G WHEEL LOADER:

Pos.	Part No	Qty	Parts name
1.	1N-3181	[2]	STUD-HOLLOW (3/8-16X1.476-IN)
2.	1W-1471	[1]	PLATE
3.	1W-1898	[1]	GASKET
4.	5P-4255	[8]	BOLT-LOCKING (3/8-16X1-IN)
5.	6B-2250	[2]	GASKET
6.	7W-6992	[1]	COVER AS
	9M-4007	[1]	DOWEL
7.	147-0182	[1]	SEAL-O-RING
8.	166-9146	[1]	GASKET
9.	166-9142	[1]	GASKET
10.	9X-8875	[1]	BOLT (1/2-13X3.5-IN)
11.	0L-1352	[2]	BOLT (3/8-16X3.25-IN)
12.	0T-0055	[2]	BOLT (3/8-16X4.25-IN)
13.	1A-2029	[7]	BOLT (3/8-16X1.125-IN)
14.	1F-7958	[1]	NUT-FULL (1/2-13-THD)
15.	2A-4639	[7]	BOLT (3/8-16X1.625-IN)
16.	5M-2894	[21]	WASHER-HARD (10.2X18.5X2.5-MM THK)
17.	5P-8245	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
18.	8S-9191	[1]	BOLT (3/8-16X4-IN)
19.	9S-8752	[1]	NUT-FULL (3/8-16-THD)
20.	143-4912	[1]	HOUSING AS-GEAR
21.	4B-8641	[3]	STUD (3/8-16X2.24-IN)
22.	8M-1871	[1]	STUD-TAPERLOCK (3/8-16X2.4-IN)
23.	9M-3296	[4]	STUD-TAPERLOCK (3/8-16X2.95 IN)
24.	8T-6764	[1]	PLUG-PIPE (1/8-27-THD)

#SEBP55270081

178-7598: HOUSING GP-FRONT

178-7598 HOUSING GP-FRONT
S/N BET1-UP
SOUND SUPPRESSION

i04840352 SEBP5527

For full view, you need register

Parts for your 980G WHEEL LOADER:

Pos.	Part No	Qty	Parts name
1.	124-7340	[1]	HOUSING AS-FRONT
	3E-8044	[1]	STUD (1/2-13X2.95-IN)
2.	188-7513	[1]	SENSOR GP-SPEED (SECONDARY, TIMING)
3.	7C-1445	[1]	COVER
4.	2B-2695	[2]	BOLT (5/16-18X0.875-IN)
5.	9M-1974	[4]	WASHER-HARD (8.8X16X2-MM THK)
6.	0S-1594	[3]	BOLT (3/8-16X1-IN)(MARKED X)
7.	5M-2894	[19]	WASHER-HARD (10.2X18.5X2.5-MM THK)
8.	061-9455	[1]	SEAL-O-RING
9.	0S-1588	[13]	BOLT (3/8-16X1.25-IN)
11.	155-3629	[1]	GASKET
12.	166-9144	[1]	GASKET
13.	353-9977 Y	[1]	PLATE AS-FRONT HOUSING
14.	0L-2070	[1]	BOLT (3/8-16X2.25-IN)
15.	0T-0055	[4]	BOLT (3/8-16X4.25-IN)
16.	9S-8752	[2]	NUT-FULL (3/8-16-THD)
21.	0S-1591	[1]	BOLT (3/8-16X1.5-IN)
22.	1A-5183	[2]	BOLT (3/8-16X4.75-IN)
23.	1A-5964	[4]	BOLT (3/8-16X4.5-IN)
24.	324-6804	[1]	COVER AS
25.	100-3098	[1]	COVER AS-PANEL
28.	2H-3755	[2]	BOLT (5/16-18X0.43-IN)
29.	3P-1155	[1]	SEAL-O-RING
30.	132-9770	[1]	SPACER AS
	1W-6448	[2]	DOWEL
31.	5P-4255	[8]	BOLT-LOCKING (3/8-16X1-IN)
32.	7X-4805	[2]	SEAL-O-RING
33.	228-4947	[2]	SEAL-O-RING
34.	189-9266	[1]	SENSOR GP-SPEED (PRIMARY, TIMING)
35.	9X-6458	[19]	WASHER-HARD (10.2X22.5X3-MM THK)
	Y		SEPARATE ILLUSTRATION

#SEBP55270082

192-9200: HOUSING GP-FRONT

192-9200 HOUSING GP-FRONT
S/N TXC1-UP; 41Z1-UP

i04850757 SEBP5527

For full view, you need register

Parts for your 980G WHEEL LOADER:

Pos.	Part No	Qty	Parts name
1.	1N-3181	[2]	STUD-HOLLOW (3/8-16X1.476-IN)
2.	1W-1471	[1]	PLATE
3.	5P-4255	[8]	BOLT-LOCKING (3/8-16X1-IN)
4.	6B-2250	[2]	GASKET
5.	6N-0389	[1]	STUD (1/2-13X2.63-IN)
6.	143-4912	[1]	HOUSING AS-GEAR
6A.	4B-8641	[3]	STUD (3/8-16X2.24-IN)
6B.	8M-1871	[1]	STUD-TAPERLOCK (3/8-16X2.4-IN)
6C.	8T-6764	[1]	PLUG-PIPE (1/8-27-THD)
6D.	9M-3296	[4]	STUD-TAPERLOCK (3/8-16X2.95 IN)
7.	166-9142	[1]	GASKET
8.	166-9146	[1]	GASKET
9.	0L-1352	[2]	BOLT (3/8-16X3.25-IN)
10.	0T-0055	[2]	BOLT (3/8-16X4.25-IN)
11.	1A-2029	[4]	BOLT (3/8-16X1.125-IN)
12.	4H-6145	[1]	GASKET
13.	5M-2894	[18]	WASHER-HARD (10.2X18.5X2.5-MM THK)
14.	8S-9191	[1]	BOLT (3/8-16X4-IN)
15.	9S-8752	[1]	NUT-FULL (3/8-16-THD)

#SEBP55270083

1W-1427: HOUSING GP-FRONT

1W-1427 HOUSING GP-FRONT
S/N TXC1-UP; 41Z1-UP

i04766329 SEBP5527

For full view, you need register

Parts for your 980G WHEEL LOADER:

Pos.	Part No	Qty	Parts name
1.	0T-0055	[2]	BOLT (3/8-16X4.25-IN)
2.	5M-2894	[18]	WASHER-HARD (10.2X18.5X2.5-MM THK)
3.	166-9142	[1]	GASKET
4.	0L-1352	[2]	BOLT (3/8-16X3.25-IN)
5.	1A-2029	[4]	BOLT (3/8-16X1.125-IN)
6.	1W-1426	[1]	HOUSING AS-GEAR
7.	6F-7012	[2]	STUD-TAPERLOCK (3/8-16X1.57-IN)
8.	5M-6214	[1]	PLUG (1/8-27 PTF)
9.	4B-8641	[5]	STUD (3/8-16X2.24-IN)(6.1CM LG)
			-OR-
	8M-1871	[5]	STUD-TAPERLOCK (3/8-16X2.4-IN)(5.7CM LG)
10.	4B-8641	[3]	STUD (3/8-16X2.24-IN)
11.	1N-3181	[2]	STUD-HOLLOW (3/8-16X1.476-IN)
	6B-2250	[2]	GASKET
12.	5P-4255	[8]	BOLT-LOCKING (3/8-16X1-IN)
13.	8S-9191	[1]	BOLT (3/8-16X4-IN)
14.	9S-8752	[1]	NUT-FULL (3/8-16-THD)
15.	1W-1471	[1]	PLATE
16.	166-9146	[1]	GASKET
17.	6N-0389	[1]	STUD (1/2-13X2.63-IN)
	4H-6145	[1]	GASKET

#SEBP55270084

20R-0683: KIT-ENGINE OVERHAUL

20R-0683 KIT-ENGINE OVERHAUL
S/N AYT1-UP; BET1-UP
(GOLD KIT) 3406E/C15 MACHINE ENGINES
PART OF 391-6162, 391-6163 PARTS GP-ENGINE OVERHAUL
FOR USE WITH @@@@@169-4823@@@@@, @@@@@235-4678@@@@@, 824G, 825G, 826G, 980G, 735, 621G, 623G, 627F, 627G

i04842871 SEBP5527

For full view, you need register

Parts for your 980G WHEEL LOADER:

Part No	Qty	Parts name
379-9575 Y	[1]	KIT-ENGINE OVERHAUL (BRONZE)

0R-8017	[6]	CYLINDER PACK GP
		(EACH INCLUDES)
0R-3780	[1]	ROD AS-CONNECTING
6I-2726	[1]	BUSHING
7E-4195 M	[2]	BOLT-CONNECTING ROD (M16X1.5X97-MM)
7N-2043	[2]	DOWEL
168-7246	[1]	PIN-PISTON
7E-1177	[2]	RETAINER-PIN
134-3761	[1]	RING-PISTON (TOP)
160-9874	[1]	KIT-GASKET (SINGLE CYLINDER LINER)
9L-5854	[1]	BAND-FILLER (130.2-MM ID)
110-2220	[1]	SEAL-LINER
142-6217	[1]	SEAL-O-RING
142-7072	[1]	SEAL-LINER
176-5749	[1]	RING-PISTON (INTERMEDIATE)
189-9771	[1]	RING-PISTON (OIL CONTROL)
197-9322	[1]	LINER-CYLINDER BLOCK
M		METRIC PART
Y		SEPARATE ILLUSTRATION

#SEBP55270085

20R-0688: KIT-ENGINE OVERHAUL

20R-0688 KIT-ENGINE OVERHAUL
S/N TXC1-UP; 2SR1-UP; 41Z1-UP
PROVIDE AN ENGINE OVERHAUL (GOLD KIT) FOR THE 3406 MECHANICAL MACHINE ENGINE
PART OF 391-6158, 391-6160 PARTS GP-ENGINE OVERHAUL
FOR USE WITH 2W-1004 ENGINE ARRANGEMENT

i04768734 SEBP5527

For full view, you need register

Parts for your 980G WHEEL LOADER:

Part No	Qty	Parts name
379-9131 Y	[1]	KIT-ENGINE OVERHAUL (BRONZE)
0R-9847	[6]	CYLINDER PACK GP
		(EACH INCLUDES)
134-3761	[1]	RING-PISTON (TOP)
160-9874	[1]	KIT-GASKET (SINGLE CYLINDER LINER)
9L-5854	[1]	BAND-FILLER (130.2-MM ID)
110-2220	[1]	SEAL-LINER
142-6217	[1]	SEAL-O-RING
142-7072	[1]	SEAL-LINER
164-4187	[1]	RING-PISTON (INTERMEDIATE)
172-3284	[1]	RING-PISTON (OIL CONTROL)
197-9322	[1]	LINER-CYLINDER BLOCK
0R-3780	[1]	ROD AS-CONNECTING
6I-2726	[1]	BUSHING
7E-4195 M	[2]	BOLT-CONNECTING ROD (M16X1.5X97-MM)
7N-2043	[2]	DOWEL
130-0241	[1]	SKIRT-PISTON
168-7246	[1]	PIN-PISTON
7E-1177	[2]	RETAINER-PIN
168-4540	[1]	CROWN AS-PISTON

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED
M		METRIC PART
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP55270086

20R-1101: KIT-ENGINE OVERHAUL

20R-1101 KIT-ENGINE OVERHAUL
S/N TXC1-UP; 2SR1-UP; 41Z1-UP
PROVIDE AN ENGINE KIT OVERHAUL (PLATINUM KIT) FOR THE 3406 MECHANICAL MACHINE ENGINE
PART OF 391-6158, 391-6160 PARTS GP-ENGINE OVERHAUL
FOR USE WITH 2W-1004 ENGINE ARRANGEMENT

i04768757 SEBP5527

For full view, you need register

Parts for your 980G WHEEL LOADER:

Part No	Qty	Parts name
379-9131 Y	[1]	KIT-ENGINE OVERHAUL (BRONZE)
0R-9449 Y	[1]	PUMP GP-ENGINE OIL
100-6889	[12]	BRIDGE-VALVE
10R-7438	[1]	CYLINDER HEAD GP
2A-4429	[48]	LOCK-RETAINER
4N-7253	[6]	GASKET-CHAMBER
4W-2471	[24]	SPRING-VALVE (OUTER)
4W-2472	[24]	SPRING-VALVE (INNER)
4W-2473	[24]	WASHER-VALVE SPRING GUIDE
4W-2474	[24]	ROTOCOIL AS
6L-7442	[6]	STUD-TAPERLOCK (5/16-18X1.08-IN)
7W-2315	[6]	RETAINER
7W-6492	[4]	PLUG-PIPE (1/2-14-THD)
8T-6767	[1]	PLUG-PIPE (3/8-18-THD)
	[1]	CYLINDER HEAD AS
1W-5283	[12]	INSERT-VALVE SEAT (EXHAUST)(STANDARD)
7C-5353 AB		INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)
7C-5354 AB		INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)
2M-6471	[1]	PLUG-CUP
3B-0623	[10]	PLUG-CUP
3B-0645	[12]	PLUG-CUP
4N-5893	[12]	INSERT-VALVE SEAT (INLET)(STANDARD)
7C-7602 AB		INSERT-VALVE SEAT (0.13-MM OS, INLET)
7C-7603 AB		INSERT-VALVE SEAT (0.25-MM OS, INLET)
7C-7604 AB		INSERT-VALVE SEAT (0.51-MM OS, INLET)
7C-7605 AB		INSERT-VALVE SEAT (0.76-MM OS, INLET)
102-2102	[6]	PLUG
122-7374	[24]	GUIDE-VALVE (STANDARD)
121-9859 AB		GUIDE-VALVE (0.13-MM OS)
121-9860 AB		GUIDE-VALVE (0.51-MM OS)
0R-9847	[6]	CYLINDER PACK GP
		(EACH INCLUDES)
134-3761	[1]	RING-PISTON (TOP)
160-9874	[1]	KIT-GASKET (SINGLE CYLINDER LINER)
9L-5854	[1]	BAND-FILLER (130.2-MM ID)
110-2220	[1]	SEAL-LINER
142-6217	[1]	SEAL-O-RING
142-7072	[1]	SEAL-LINER
164-4187	[1]	RING-PISTON (INTERMEDIATE)
172-3284	[1]	RING-PISTON (OIL CONTROL)
197-9322	[1]	LINER-CYLINDER BLOCK
0R-3780	[1]	ROD AS-CONNECTING
6I-2726	[1]	BUSHING
7E-4195 M	[2]	BOLT-CONNECTING ROD (M16X1.5X97-MM)
7N-2043	[2]	DOWEL
130-0241	[1]	SKIRT-PISTON
168-7246	[1]	PIN-PISTON
7E-1177	[2]	RETAINER-PIN
168-4540	[1]	CROWN AS-PISTON
0R-9943	[6]	NOZZLE AS-FUEL VALVE
		(EACH INCLUDES)
9L-9098	[1]	SEAL-CARBON STOP
9X-2836	[1]	SCREW-BUTTON HEAD
114-3362	[1]	SEAL-O-RING
271-2489	[1]	SEAL-WASHER
10R-0482	[1]	PUMP GP-WATER
199-6530	[1]	PUMP GP-WATER
136-1107	[1]	RETAINER
153-1256	[1]	SEAL-LIP TYPE
222-1528	[1]	SEAL-LIP TYPE
349-2654	[1]	SEAL-WATER PUMP
4N-0350	[1]	GEAR-WATER PUMP DRIVE (74-TEETH)
108-7930	[1]	BEARING AS-ROLLER
0S-1591	[1]	BOLT (3/8-16X1.5-IN)
1A-1135	[1]	BOLT (5/8-11X2-IN)
1B-7182	[4]	BOLT (5/16-18X1.25-IN)
5S-0581	[1]	WASHER-HARD (17X38X8-MM THK)
9M-6527	[1]	WASHER-HARD (10.2X25.5X5-MM THK)
135-4928	[1]	SHAFT-WATER PUMP
108-5959	[1]	FILTER
129-9907	[1]	IMPELLER-PUMP
	[1]	KIT-GASKET
4W-4014	[1]	GASKET-REGULATOR HOUSING
7C-0307	[1]	GASKET
9M-3786	[1]	SEAL-O-RING
109-0076	[1]	SEAL-O-RING
109-0077	[3]	SEAL-O-RING
125-0434	[1]	SEAL-INTEGRAL (WATER TEMPERATURE REGULATOR)
156-5198	[1]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED
A		NOT PART OF THIS GROUP
B		USE AS REQUIRED
M		METRIC PART
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP55270087

20R-1104: KIT-ENGINE OVERHAUL

20R-1104 KIT-ENGINE OVERHAUL
S/N AYT1-UP; BET1-UP
(PLATINUM KIT) FOR THE 3406E/C15 MACHINE ENGINES
PART OF 391-6162 PARTS GP-ENGINE OVERHAUL
FOR USE WITH @@@@@169-4823@@@@@, 824G, 825G, 826G, 980G, 735, 621G, 623G, 627F, 627G

i04843009 SEBP5527

For full view, you need register

Parts for your 980G WHEEL LOADER:

Part No	Qty	Parts name
379-9575 Y	[1]	KIT-ENGINE OVERHAUL (BRONZE)
0R-9449 Y	[1]	PUMP GP-ENGINE OIL
10R-7658	[1]	CYLINDER HEAD GP
186-2001	[24]	ROTOCOIL AS
211-3122	[24]	SPRING-VALVE (INNER)
247-9908	[24]	SPRING-VALVE (OUTER)
153-7024	[12]	VALVE-EXHAUST
348-7743	[12]	BRIDGE-VALVE
2A-4429	[48]	LOCK-RETAINER
6I-0928	[24]	WASHER-SPECIAL
Y	[1]	CYLINDER HEAD AS
163-2478	[24]	SEAL-VALVE STEM
153-7023	[12]	VALVE-INLET
0R-8017	[6]	CYLINDER PACK GP
		(EACH INCLUDES)
0R-3780	[1]	ROD AS-CONNECTING
6I-2726	[1]	BUSHING
7E-4195 M	[2]	BOLT-CONNECTING ROD (M16X1.5X97-MM)
7N-2043	[2]	DOWEL
168-7246	[1]	PIN-PISTON
7E-1177	[2]	RETAINER-PIN
134-3761	[1]	RING-PISTON (TOP)
160-9874	[1]	KIT-GASKET (SINGLE CYLINDER LINER)
9L-5854	[1]	BAND-FILLER (130.2-MM ID)
110-2220	[1]	SEAL-LINER
142-6217	[1]	SEAL-O-RING
142-7072	[1]	SEAL-LINER
176-5749	[1]	RING-PISTON (INTERMEDIATE)
189-9771	[1]	RING-PISTON (OIL CONTROL)
197-9322	[1]	LINER-CYLINDER BLOCK
10R-0955	[6]	INJECTOR GP-FUEL
		(EACH INCLUDES)
3E-4354	[1]	BALL
4N-9019	[4]	DOWEL
8T-5452	[1]	SEAL-O-RING
9X-7317	[1]	SEAL-O-RING
100-6165	[1]	SPRING-NOZZLE
230-3728	[1]	SEAL-O-RING
230-3775	[1]	SEAL-O-RING
10R-0483	[1]	PUMP GP-WATER
199-6529 Y	[1]	PUMP GP-WATER

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED


		AVAILABLE REPAIR KIT(S):
325-0386 AB	[1]	KIT-CYLINDER HEAD
		(INCLUDES CYLINDER HEAD GROUP & BRIDGE VALVES)
		(RELEASED TO PROVIDE NEW KIT-HEAD FOR USE WHERE CHROMO INTAKE VALVE ARE NOT ACCEPTABLE)
A		NOT PART OF THIS GROUP
B		USE AS REQUIRED
M		METRIC PART
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP55270088

20R-1107: KIT-ENGINE OVERHAUL

20R-1107 KIT-ENGINE OVERHAUL
S/N AYT1-UP; BET1-UP
(PLATINUM KIT) 3406E/C15 MACHINE ENGINES
PART OF 391-6163 PARTS GP-ENGINE OVERHAUL
FOR USE WITH @@@@@235-4678@@@@@, 824G, 825G, 826G, 980G, 735, 621G, 623G, 627F, 627G,

i04843929 SEBP5527

For full view, you need register

Parts for your 980G WHEEL LOADER:

Part No	Qty	Parts name
379-9575 Y	[1]	KIT-ENGINE OVERHAUL (BRONZE)
0R-9449 Y	[1]	PUMP GP-ENGINE OIL
10R-9547	[1]	CYLINDER HEAD GP
348-7743	[12]	BRIDGE-VALVE
186-2001	[24]	ROTOCOIL AS
211-3122	[24]	SPRING-VALVE
214-7568	[1]	SEAL-O-RING
247-9908	[24]	SPRING-VALVE
153-7024	[12]	VALVE-EXHAUST
9S-8005	[2]	PLUG (3/4-16-THD)
9S-8006	[1]	PLUG (7/8-14-THD)
	[1]	CYLINDER HEAD AS
152-7582	[12]	INSERT-VALVE SEAT (EXHAUST)(STANDARD)
167-0642 AB		INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)
170-4737 AB		INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)
166-2904	[12]	SEAL-O-RING
175-3617	[12]	INSERT-VALVE SEAT (INLET)(STANDARD)
167-0643 AB		INSERT-VALVE SEAT (0.76-MM OS, INLET)
170-4738 AB		INSERT-VALVE SEAT (0.51-MM OS, INLET)
216-5582	[7]	BUSHING (STANDARD)
217-0751 AB		BUSHING (0.25-MM OS)
217-0752 AB		BUSHING (0.762-MM OS)
261-3429 AB		BUSHING (1.778-MM OS)
261-3430 AB		BUSHING (1.27-MM OS)
263-4920	[6]	SLEEVE-INJECTOR (INLET)
3B-0623	[17]	PLUG-CUP
3B-0645	[20]	PLUG-CUP
8T-6757	[3]	PLUG-PIPE
9X-7430	[6]	SEAL-O-RING
122-7375	[24]	GUIDE-VALVE (STANDARD)
122-0447 AB		GUIDE-VALVE (0.51-MM OS)
122-8612 AB		GUIDE-VALVE (0.13-MM OS)
163-2478	[24]	SEAL-VALVE STEM
153-7023	[12]	VALVE-INLET
2A-4429	[48]	LOCK-RETAINER
2R-6806	[1]	CONNECTOR
6I-0928	[24]	WASHER-SPECIAL
6V-3251	[1]	SEAL-O-RING
6V-6609	[2]	SEAL-O-RING
0R-8017	[6]	CYLINDER PACK GP
		(EACH INCLUDES)
0R-3780	[1]	ROD AS-CONNECTING
6I-2726	[1]	BUSHING
7E-4195 M	[2]	BOLT-CONNECTING ROD (M16X1.5X97-MM)
7N-2043	[2]	DOWEL
168-7246	[1]	PIN-PISTON
7E-1177	[2]	RETAINER-PIN
134-3761	[1]	RING-PISTON (TOP)
160-9874	[1]	KIT-GASKET (SINGLE CYLINDER LINER)
9L-5854	[1]	BAND-FILLER (130.2-MM ID)
110-2220	[1]	SEAL-LINER
142-6217	[1]	SEAL-O-RING
142-7072	[1]	SEAL-LINER
176-5749	[1]	RING-PISTON (INTERMEDIATE)
189-9771	[1]	RING-PISTON (OIL CONTROL)
197-9322	[1]	LINER-CYLINDER BLOCK
10R-0955	[6]	INJECTOR GP-FUEL
		(EACH INCLUDES)
3E-4354	[1]	BALL
4N-9019	[4]	DOWEL
8T-5452	[1]	SEAL-O-RING
9X-7317	[1]	SEAL-O-RING
100-6165	[1]	SPRING-NOZZLE
230-3728	[1]	SEAL-O-RING
230-3775	[1]	SEAL-O-RING
10R-0483	[1]	PUMP GP-WATER
199-6529 Y	[1]	PUMP GP-WATER

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED


		AVAILABLE REPAIR KIT(S):
349-2652 AB	[1]	KIT-CYLINDER HEAD
		(INCLUDES CYLINDER HEAD GROUP & BRIDGE VALVES)
A		NOT PART OF THIS GROUP
B		USE AS REQUIRED
M		METRIC PART
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP55270089

379-9131: KIT-ENGINE OVERHAUL

379-9131 KIT-ENGINE OVERHAUL
S/N TXC1-UP; 2SR1-UP; 41Z1-UP
RELEASE OF THE (BRONZE) LEVEL OVERHAUL KIT FOR THE 3406/3406C ENGINE USED, IN THE 980F/980F SERIES II WHEEL LOADER
PART OF 20R-0688, 20R-1101 KIT-ENGINE OVERHAUL, 391-6158, 391-6160 PARTS GP-ENGINE OVERHAUL
FOR USE WITH @@@@@144-3431@@@@@, @@@@@108-0348@@@@@, @@@@@134-4138@@@@@, @@@@@146-5815@@@@@, @@@@@152-7468@@@@@, @@@@@192-7101@@@@@, @@@@@202-3123@@@@@, @@@@@202-3124@@@@@, T614X, MACHINE S/N 5XJ1-UP, ENGINE S/N 11N1-UP, A5N1-UP, ENGINE ARRANGEMENT 4P-7980, REHS7281
FIELD INSTALLATION

i04767583 SEBP5527

For full view, you need register

Parts for your 980G WHEEL LOADER: