AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9Y-4913 FASTENER GP-FUEL INJ PUMP -GOVERNOR S/N 41Z1-UP PART OF 104-4407 PUMP GP-GOV & FUEL INJ 824G


FUEL SYSTEM
PUMP GP-FUEL INJECTION
FILTER GP-FUEL
GOVERNOR GP
LINES GP-FUEL INJECTION
LINES GP-FUEL
FILTER GP-FUEL
LINES GP-FUEL INJECTION

WHEEL DOZER 824G WHEEL DOZER 4SN
 3406/3406C/3406E Engine Rebuild Kit & Related Parts for 824G/824G Series II, 826G/826G Series II Wheel Tractor & Compactor 4SN00001-UP (MACHINE) SEBP5531 824G 4SN   (1995)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
DRIVE GP-GOVERNOR & FUEL PUMP
110-1282 DRIVE GP-GOVERNOR & FUEL PUMP
FASTENER GP-FUEL INJ PUMP
1W-7376 FASTENER GP-FUEL INJ PUMP
FASTENER GP-FUEL INJ PUMP
9Y-4913 FASTENER GP-FUEL INJ PUMP
INJECTOR GP-FUEL
128-8510 INJECTOR GP-FUEL
PROTECTION GP-FUEL SYSTEM
128-7985 PROTECTION GP-FUEL SYSTEM
PUMP GP-FUEL INJECTION
104-4409 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
108-6633 PUMP GP-FUEL INJECTION
PUMP GP-GOV & FUEL INJ
104-4407 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
377-7099 PUMP GP-GOV & FUEL INJ
 

#SEBP55310170
 

9Y-4913: FASTENER GP-FUEL INJ PUMP

9Y-4913 FASTENER GP-FUEL INJ PUMP -GOVERNOR
S/N 41Z1-UP
PART OF 104-4407 PUMP GP-GOV & FUEL INJ
i00122914 SEBP5531
9Y4913 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 824G WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-5894 [4] BOLT (1/4-20X3.75-IN)  
2. 7B-2742 [2] BOLT (1/4-20X1.25-IN)  
3. 8S-4710 [4] BOLT (1/4-20X4-IN)  
4. 1B-2716 [2] BOLT (1/4-20X5-IN)  
5. 4F-7957 [2] BOLT (1/4-20X0.875-IN)  
6. 8F-8178 [1] BOLT (1/4-20X3.25-IN)  
7. 7X-0869 [1] BOLT-LOCKING (1/4-20X2-IN)  
8. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
 

#SEBP55310171
 

199-3228: FILTER & MTG GP-FUEL

199-3228 FILTER & MTG GP-FUEL
S/N BKN1-UP
i03169225 SEBP5531
1993228 FILTER & MTG GP-FUEL Parts scheme
  For full view, you need register

Parts for your 824G WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1R-0762 [1] FILTER-FUEL (ADVANCED EFFICIENCY)(SECONDARY)  
2. 1W-3011 [1] SPACER (10.5X22X73.5-MM THK)  
3. 3S-2093 [5] STRAP-CABLE  
4. 260-9236 [1] VALVE AS-BALL (SHUTOFF)  
  260-9234 [1] VALVE-SHUTOFF  
  214-7568 [1] SEAL-O-RING  
5. 8T-9655 [8] MOUNT-ISOLATION  
6. 101-3120 [3] SPACER (10.5X25X20-MM THK)  
7. 165-5970 Y [1] SWITCH GP-TOGGLE (FUEL PRIMING PUMP ON/OFF)  
8. 174-7599 [1] BASE AS-FUEL FILTER  
8A. 9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
9. 190-8977 Y [1] PUMP GP-FUEL PRM & WATER SEP (ELECTRIC)  
10. 191-1782 [1] SPACER (8.5X12.7X38.2-MM THK)  
11. 194-6725 Y [1] SENSOR GP-PRESSURE (FUEL)  
12. 199-3227 [1] BRACKET AS  
  1F-0750 [5] NUT-WELD (3/8-16-THD)  
  4K-9097 [5] NUT-WELD (5/16-18-THD)  
13. 200-2655 [1] HARNESS AS-PUMP (FUEL PRIMING)  
  114-8843 E SLEEVE-PLASTIC (100-CM)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
    (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
14. 201-4340 [2] PLUG AS  
    (EACH INCLUDES)
  6V-4589 [1] SEAL-O-RING  
  9S-8006 [1] PLUG (7/8-14-THD)  
16. 305-3684 C [1] PLATE-IDENTIFICATION (FUEL PRIMING PUMP ON, OFF)  
17. 232-1374 [1] BRACKET  
18. 232-1376 [2] SPACER (8.5X12.7X139.1-MM THK)  
19. 191-7805 [1] ELBOW AS  
  214-7568 [1] SEAL-O-RING  
  030-7947 [1] ADAPTER-ELBOW  
20. 0L-1351 [1] BOLT (3/8-16X0.875-IN)  
21. 0S-1571 [2] BOLT (3/8-16X1.75-IN)  
23. 130-5300 [3] CLIP  
24. 183-3408 [4] PLUG AS  
    (EACH INCLUDES)
  214-7568 [1] SEAL-O-RING  
  9S-8004 [1] PLUG (9/16-18-THD)  
25. 1A-2029 [4] BOLT (3/8-16X1.125-IN)  
26. 1C-2251 [1] BOLT (3/8-16X1.87-IN)  
27. 1D-4539 [1] BOLT (5/16-18X2.5-IN)  
28. 2A-4639 [2] BOLT (3/8-16X1.625-IN)  
29. 186-1667 [1] CONNECTOR AS  
  214-7568 [1] SEAL-O-RING  
  2R-6806 [1] CONNECTOR  
30. 4F-3508 [2] BOLT (5/16-18X6.5-IN)  
31. 4P-7581 [2] CLIP (LADDER)  
32. 4P-8134 [3] CLIP (LADDER)  
33. 5M-2894 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
34. 5P-1404 [1] ADAPTER  
35. 6K-3607 [1] CONNECTOR  
36. 6V-0484 [1] ELBOW  
37. 6V-4589 [2] SEAL-O-RING  
38. 6V-5048 [1] SEAL-O-RING  
39. 214-7568 C [2] SEAL-O-RING  
40. 7X-0613 [3] WASHER-HARD (8.8X25.5X5-MM THK)  
41. 8S-9191 [1] BOLT (3/8-16X4-IN)  
42. 9N-0869 [3] WASHER-HARD (8.8X25.5X2-MM THK)  
43. 9X-0261 [1] ADAPTER  
44. 9X-6458 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
45. 0S-1617 [1] BOLT (5/16-18X0.75-IN)  
46. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#SEBP55310172
 

1W-4757: FILTER GP-SECONDARY FUEL

1W-4757 FILTER GP-SECONDARY FUEL
S/N TXC1-UP; 41Z1-UP
i00107801 SEBP5531
1W4757 FILTER GP-SECONDARY FUEL Parts scheme
  For full view, you need register

Parts for your 824G WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-3892 [1] BASE AS-FUEL FILTER  
  9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
2. 183-3407 [1] PLUG AS  
  9S-8004 [1] PLUG (9/16-18-THD)  
  214-7568 [1] SEAL-O-RING  
3. 1R-0749 [1] FILTER-FUEL (ADVANCED EFFICIENCY)(SECONDARY)  
 

#SEBP55310173
 

174-9570: FILTER GP-WATER SEP & FUEL

174-9570 FILTER GP-WATER SEP & FUEL
S/N BKN1-UP
PART OF 190-8977 PUMP GP-FUEL PRM & WATER SEP
i01515678 SEBP5531
1749570 FILTER GP-WATER SEP & FUEL Parts scheme
  For full view, you need register

Parts for your 824G WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 326-1644 [1] FILTER AS-WATER SEP & FUEL (PRIMARY)  
1A. 220-8678 [1] SEAL-RING (FUEL, WATER SEPARATOR)  
2. 343-5527 [1] BOWL AS  
2A. 5F-9144 [1] SEAL-O-RING  
2B. 8F-7219 [1] SEAL-O-RING  
 

#SEBP55310174
 

7C-4797: GOVERNOR GP

7C-4797 GOVERNOR GP
S/N TXC1-UP; 41Z1-UP
PART OF 104-4407, 377-7099 PUMP GP-GOV & FUEL INJ
i00158236 SEBP5531
7C4797 GOVERNOR GP Parts scheme 7C4797 GOVERNOR GP Parts scheme 7C4797 GOVERNOR GP Parts scheme 7C4797 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 824G WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5735 [1] LEVER AS-PIVOT  
1A. 115-1249 [1] SETSCREW-SOCKET  
1B. 8L-5832 [1] NUT-HEX (10-32-THD)  
1C. 4W-5734 [1] LEVER AS  
1D. 6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
1E. 8L-5832 [1] NUT-HEX (10-32-THD)  
2. 2W-2216 [1] SPRING-LINK  
3. 1N-3800 [1] SLEEVE-RACK CONTROL  
4. 2M-7819 [2] RING-RETAINING  
5. 1N-3802 [1] SEAT-SPRING  
6. 8N-9678 [1] PISTON GP-GOVERNOR SERVO  
6A. 7C-0790 [1] CYLINDER AS  
6B. 1W-4098 [1] PISTON-GOVERNOR SERVO  
6C. 7W-0250 [1] SLEEVE  
6D. 5P-9757 [1] SEAL-O-RING  
6E. 8N-2505 [1] VALVE-GOVERNOR SERVO  
7. 031-0216 [3] BOLT (1/4-20X0.75-IN)  
8. 7M-7219 [1] BEARING-THRUST  
9. 4N-2953 [1] RING-LOCK  
10. 133-8890 [2] RACE-NEEDLE BEARING  
11. 4W-6868 [1] RISER-GOVERNOR  
12. 8N-9680 [1] HOUSING AS-GOVERNOR  
12A. 8S-6814 [1] PIN  
12B. 4F-6024 [2] PIN  
13. 2W-7400 [1] SPRING  
14. 7N-7269 [1] ACTUATOR AS-GOVERNOR  
14A. 4N-6408 [1] PISTON AS  
14B. 4N-6407 [1] SPOOL-DASHPOT  
14C. 4N-6406 [1] RING-SPACER  
14D. 4N-6404 [1] RING-RETAINING  
14E. 4N-6410 [1] SPRING-DASHPOT  
14F. 7N-7268 [1] SEAT-SPRING  
14G. 1N-3861 [1] SHIELD-GOVERNOR SPRING  
15. 4N-0432 [1] BALL BEARING  
16. 6N-3504 [1] SEAT-GOVERNOR SPRING  
17. 7N-7270 [2] SLEEVE-SPRING  
19. 7E-3986 [1] CARRIER-WEIGHT  
20. 119-8699 [4] WEIGHT-GOVERNOR  
21. 9Y-7037 [4] BOLT (1/4-20X1.25-IN)  
22. 4N-9019 [1] DOWEL  
23. 8N-2510 [1] SHAFT-WEIGHT CARRIER  
24. 1S-5440 [4] DOWEL  
25. 9Y-4701 [1] SETSCREW-SOCKET (10-32X1.38-IN)  
    -OR-
  5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
26. 8L-5832 [1] NUT-HEX (10-32-THD)  
27. 1W-4243 [1] SPRING-BUMPER  
28. 8N-3256 [1] COLLAR-LOAD STOP  
29. 7W-5836 [1] BOLT AS-SPECIAL (STOP)  
29A. 7W-5835 [1] COLLAR  
30. 8N-3956 [1] BLOCK AS-STOP  
30A. 8N-3303 [1] DOWEL  
31. 6D-3897 [1] BOLT (8-32X0.5-IN)  
32. 6L-5551 [2] BOLT-SOCKET HEAD (1/4-20X2.25-IN)  
33. 7N-8821 [2] RING-RETAINING  
34. 3K-5733 [1] SPRING  
35. 2W-6102 [1] LEVER-SPRING SEAT  
36. 7N-1052 [1] DOWEL  
37. 1W-5339 [1] SHAFT AS-GOVERNOR  
38. 5H-2532 [1] KEY-WOODRUFF  
39. 1W-3961 [1] SPACER (6.75X14X13-MM THK)  
40. 7N-2176 [1] PIN-DETENT  
41. 7N-2171 [4] RING-RETAINING  
42. 7N-2172 [2] PIN  
43. 2N-0828 [2] WASHER (SPRING)  
44. 4N-5621 [1] SHAFT-SHUTOFF  
45. 1W-3962 [1] SPACER (6.75X14X10-MM THK)  
46. 1J-9671 [1] SEAL-O-RING  
47. 9S-8003 [1] PLUG (1/2-20-THD)  
48. 8C-8564 [4] SCREW-LOCK  
49. 8N-3760 [1] COVER  
50. 8N-3761 [1] GASKET  
51. 4N-8445 [1] BOLT (1/4-20X1.25-IN)  
52. 1N-3935 [1] COVER  
53. 5B-3180 [1] NUT (5/16-18-THD)  
54. 144-0479 [1] GASKET-COVER (IDLE-SPEED ADJ)  
55. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
56. 1W-5341 [1] LEVER-SHUTOFF  
57. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
58. 4N-5484 [1] VALVE-NEEDLE  
  4N-5485 [1] BODY-VALVE  
59. 6H-9691 [1] SEAL-O-RING  
59A. 5F-9144 [1] SEAL-O-RING  
62. 7W-4247 [1] HOUSING AS-GOVERNOR  
62A. 8N-2499 [1] SPRING-GUIDE  
62B. 4N-0260 [1] SEAL-LIP TYPE  
62C. 3D-8317 [1] RING-RETAINING  
62D. 8N-3945 [1] BUSHING-TERMINAL  
63. 3P-0009 [1] INSULATOR  
64. 2B-2695 [1] BOLT (5/16-18X0.875-IN)  
65. 4K-9890 [1] WASHER (8.6X17.3X1.6-MM THK)  
66. 7W-4272 [1] NUT-SEALING (5/16-18-THD)  
67. 8N-3087 [1] STOP-IDLE DETENT  
68. 1B-2713 [6] BOLT (1/4-20X1.75-IN)  
69. 7W-1749 [1] COVER AS  
69A. 138-9507 [1] SEAL-LIP TYPE  
69B. 8S-6814 [2] PIN  
70. 7N-2594 [1] SETSCREW-SLOTTED  
71. 8H-9204 [1] WASHER-FELT (19/32X7/8X5/16-IN THK)  
72. 8N-3776 [1] GASKET-COVER (GOVERNOR DETENT)  
73. 8N-3762 [1] COVER  
74. 144-0478 [1] GASKET  
75. 0S-1347 [2] BOLT (1/4-20X0.75-IN)  
76. 144-0480 [1] GASKET  
77. 2W-9305 [2] PLATE-THROTTLE  
78. 2F-2290 [1] PLUG-CORE  
79. 2P-9556 [1] WASHER (1.17X1.5X0.06-IN THK)  
 

#SEBP55310175
 

128-8510: INJECTOR GP-FUEL

128-8510 INJECTOR GP-FUEL
S/N BKN1-UP
i00522089 SEBP5531
1288510 INJECTOR GP-FUEL Parts scheme
  For full view, you need register

Parts for your 824G WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0213 [1] CLAMP  
2. 8S-9191 [1] BOLT (3/8-16X4-IN)  
3. 100-5072 [1] SPACER (9.8X15.85X37.6-MM THK)  
4. 211-3025 [1] INJECTOR GP-FUEL  
4A. 9X-7317 [1] SEAL-O-RING  
4B. 230-3728 [1] SEAL-O-RING  
4C. 230-3775 [1] SEAL-O-RING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP55310176
 

199-4391: LINES GP-FUEL

199-4391 LINES GP-FUEL
S/N BKN1-UP
i03041552 SEBP5531
1994391 LINES GP-FUEL Parts scheme 1994391 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 824G WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-3189 [2] SPACER (10X18X20-MM THK)  
3. 7T-0266 [1] BRACKET AS  
  1F-0750 [1] NUT-WELD (3/8-16-THD)  
4. 103-4656 [1] MANIFOLD-FUEL  
5. 110-8330 [1] SPACER (11.3X19.05X90-MM THK)  
6. 267-8849 I [1] HOSE AS  
7. 264-4297 [1] SENSOR AS-TEMPERATURE (2-PIN)(FUEL)  
8. 135-9941 [1] ADAPTER  
9. 141-9308 [1] BRACKET AS  
10. 147-3396 [1] CONNECTOR-PORT  
11. 267-8850 I [1] HOSE AS  
12. 185-2058 [2] BRACKET AS  
    (EACH INCLUDES)
  1F-0750 [1] NUT-WELD (3/8-16-THD)  
14. 210-9528 [1] VALVE-CHECK (FUEL PRIMING)  
15. 233-6742 Y [1] VALVE GP-CHECK (FUEL)  
16. 240-2015 I [1] HOSE AS  
17. 255-1257 I [2] HOSE AS  
18. 257-4155 I [1] HOSE AS  
19. 030-7942 [1] ELBOW  
20. 191-7805 C [1] ELBOW AS  
  214-7568 [1] SEAL-O-RING  
  030-7947 [1] ADAPTER-ELBOW  
21. 118-4728 [1] ELBOW  
22. 067-2551 [4] CLIP  
23. 0L-1143 [2] BOLT (3/8-16X2.5-IN)  
24. 0L-1351 [1] BOLT (3/8-16X0.875-IN)  
25. 0S-0509 [2] BOLT (3/8-16X0.75-IN)  
26. 0S-1571 [2] BOLT (3/8-16X1.75-IN)  
27. 0S-1576 [2] BOLT (5/8-18X2-IN)  
28. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
29. 0S-1618 [1] BOLT (5/16-18X1-IN)  
30. 104-6202 [2] CLIP (LADDER)  
32. 134-3988 [1] CLIP (LOOP)  
33. 1A-5964 [1] BOLT (3/8-16X4.5-IN)  
34. 2P-7214 [1] ADAPTER-ELBOW  
35. 186-1667 C [3] CONNECTOR AS  
    (EACH INCLUDES)
  2R-6806 [1] CONNECTOR  
  214-7568 [1] SEAL-O-RING  
36. 5M-2894 [9] WASHER-HARD (10.2X18.5X2.5-MM THK)  
37. 5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
38. 5S-0003 [1] NUT (5/16-18-THD)  
39. 6K-9194 [2] ELBOW  
40. 6V-5048 [2] SEAL-O-RING  
41. 214-7568 C [4] SEAL-O-RING  
42. 8L-2786 [2] SEAL-O-RING  
43. 336-8614 [1] CLIP (LOOP)  
44. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
45. 9S-8002 [1] PLUG (7/16-20-THD)  
46. 183-3408 C [2] PLUG AS  
    (EACH INCLUDES)
  214-7568 [1] SEAL-O-RING  
  9S-8004 [1] PLUG (9/16-18-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP55310177
 

203-6489: LINES GP-FUEL

203-6489 LINES GP-FUEL
S/N TXC1-UP; 41Z1-UP
i03041611 SEBP5531
2036489 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 824G WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
2. 267-8853 I [1] HOSE AS  
3. 267-8854 I [1] HOSE AS  
4. 268-2977 I [1] HOSE AS  
5. 203-5915 [1] BRACKET AS  
  1F-0750 [3] NUT-WELD (3/8-16-THD)  
6. 191-7805 C [4] ELBOW AS  
    (EACH INCLUDES)
  214-7568 [1] SEAL-O-RING  
  030-7947 [1] ADAPTER-ELBOW  
7. 353-5108 [1] ELBOW AS  
  2P-7214 [1] ADAPTER-ELBOW  
  214-7568 [1] SEAL-O-RING  
8. 0L-1351 [3] BOLT (3/8-16X0.875-IN)  
9. 0S-1594 [1] BOLT (3/8-16X1-IN)  
10. 3E-4352 [1] WASHER-HARD (8.8X20.5X2.5-MM THK)  
11. 8B-2377 [1] BOLT (1/4-20X2-IN)  
12. 1B-2790 [1] BOLT (5/16-18X1.375-IN)  
13. 313-9614 C [1] ADAPTER AS  
  2R-6806 [1] CONNECTOR  
  214-7568 [1] SEAL-O-RING  
14. 2W-2494 [1] SPACER (7.5X16X20.37-MM THK)  
15. 3B-1915 [2] BOLT (3/8-16X1.375-IN)  
16. 3E-7446 [1] ELBOW  
17. 4M-2743 [2] STUD-TAPERLOCK (3/8-16-THD)  
18. 5M-2894 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
19. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
20. 351-0280 [1] CONNECTOR AS  
  5P-1404 [1] ADAPTER  
  6V-3251 [1] SEAL-O-RING  
21. 6N-4414 [1] COVER-FILTER BASE  
22. 214-7568 [1] SEAL-O-RING  
23. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
24. 9X-6458 [3] WASHER-HARD (10.2X22.5X3-MM THK)  
25. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
26. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
27. 8T-1890 [6] CLIP (TAB)  
28. 8T-1889 [6] CLIP (SLOT)  
29. 7V-6571 [6] GROMMET  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP55310178
 

7E-9703: LINES GP-FUEL FILTER

7E-9703 LINES GP-FUEL FILTER
S/N 41Z1-UP
i00166150 SEBP5531
7E9703 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 824G WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 191-7805 [4] ELBOW AS  
    (EACH INCLUDES)
  030-7947 [1] ADAPTER-ELBOW  
  214-7568 [1] SEAL-O-RING  
2. 214-7568 [1] SEAL-O-RING  
3. 9N-5279 I [1] HOSE AS  
4. 6N-4447 I [1] HOSE AS  
5. 329-5459 [1] ADAPTER AS  
  5P-1404 [1] ADAPTER  
  238-5081 [1] SEAL-O-RING  
7. 353-5108 [1] ELBOW AS  
  2P-7214 [1] ADAPTER-ELBOW  
  214-7568 [1] SEAL-O-RING  
8. 313-9614 [1] ADAPTER AS  
  2R-6806 [1] CONNECTOR  
  214-7568 [1] SEAL-O-RING  
9. 3E-7446 [1] ELBOW  
10. 116-2579 I [1] HOSE AS  
11. 124-0767 [1] BRACKET AS  
  1F-0750 [2] NUT-WELD (3/8-16-THD)  
12. 1B-2790 [1] BOLT (5/16-18X1.375-IN)  
13. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
14. 4M-2743 [2] STUD-TAPERLOCK (3/8-16-THD)  
15. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
16. 5M-2894 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
17. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
18. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
19. 6N-4414 [1] COVER-FILTER BASE  
20. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
21. 0S-0509 [4] BOLT (3/8-16X0.75-IN)  
22. 8M-2773 [6] CLIP (LOOP)  
23. 3B-1915 [2] BOLT (3/8-16X1.375-IN)  
24. 1B-2713 [1] BOLT (1/4-20X1.75-IN)  
25. 2W-2494 [1] SPACER (7.5X16X20.37-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP55310179
 

163-8025: LINES GP-FUEL INJECTION

163-8025 LINES GP-FUEL INJECTION
S/N TXC1-UP; 41Z1-UP
PART OF 371-0671 ENGINE AR-CORE
i00989951 SEBP5531
1638025 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 824G WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-9658 Y [1] LINES GP-FUEL INJECTION  
2. 4P-9659 Y [1] LINES GP-FUEL INJECTION  
3. 4P-9660 Y [1] LINES GP-FUEL INJECTION  
4. 178-1318 [6] ADAPTER AS  
    (EACH INCLUDES)
  117-1385 [1] SEAL-O-RING  
5. 129-1351 [6] NOZZLE AS-FUEL VALVE  
6. 185-2831 [6] LINE AS-FUEL INJECTION  
    (EACH INCLUDES)
  8L-2779 [1] SEAL-O-RING  
7. 7W-2315 [6] RETAINER  
8. 9L-9814 [6] LOCKNUT  
9. 8H-9204 [6] WASHER-FELT (19/32X7/8X5/16-IN THK)  
10. 7C-9198 [3] BLOCK  
11. 0S-1615 [6] BOLT (1/4-20X0.75-IN)  
12. 5P-0537 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
13. 1A-9579 [3] BOLT (5/16-18X1.5-IN)  
14. 9M-1974 [6] WASHER-HARD (8.8X16X2-MM THK)  
15. 0S-1618 [2] BOLT (5/16-18X1-IN)  
16. 054-4984 [1] SPACER (10X15X8.5-MM THK)  
17. 1B-2790 [1] BOLT (5/16-18X1.375-IN)  
18. 0S-1617 [2] BOLT (5/16-18X0.75-IN)  
19. 141-2675 [1] BRACKET  
20. 141-2676 [1] BRACKET AS  
21. 141-2674 [1] BRACKET  
22. 141-2672 [1] BRACKET  
23. 3E-4352 [2] WASHER-HARD (8.8X20.5X2.5-MM THK)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Special Instruction
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Service Magazine
The Procedure for the Removal of the Electronic Unit Injector has Changed. {1290}
2004/05/10
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Caterpillar Parts SIS Catalog 824G :

FASTENER GP-FUEL INJ PUMP
1W-7376 FASTENER GP-FUEL INJ PUMP
DRIVE GP-GOVERNOR & FUEL PUMP
110-1282 DRIVE GP-GOVERNOR & FUEL PUMP
COVER GP-FUEL TRANSFER
4W-1727 COVER GP-FUEL TRANSFER
COVER GP-FUEL TRANSFER
358-6186 COVER GP-FUEL TRANSFER
CONTROL GP-FUEL RATIO
124-5658 CONTROL GP-FUEL RATIO
TURBOCHARGER GP
196-5946 TURBOCHARGER GP
TURBOCHARGER GP
187-3578 TURBOCHARGER GP
TURBOCHARGER GP
179-5922 TURBOCHARGER GP
FILTER & MTG GP-FUEL
199-3228 FILTER & MTG GP-FUEL
FILTER GP-SECONDARY FUEL
1W-4757 FILTER GP-SECONDARY FUEL
FILTER GP-WATER SEP & FUEL
174-9570 FILTER GP-WATER SEP & FUEL
GOVERNOR GP
7C-4797 GOVERNOR GP
INJECTOR GP-FUEL
128-8510 INJECTOR GP-FUEL
LINES GP-FUEL
199-4391 LINES GP-FUEL
LINES GP-FUEL
203-6489 LINES GP-FUEL
LINES GP-FUEL FILTER
7E-9703 LINES GP-FUEL FILTER

Truck sale:

Caterpillar 824G, , Bau-Und Bergbauausrüstung
93,505 USD 
Caterpillar 824G, , Bau-Und Bergbauausrüstung
- Dozers
ZEPPELIN BAUMASCHINEN
Germany
CATERPILLAR 824G 1999
 
CATERPILLAR 824G 1999
- WHEEL DOZERS
ZEPPELIN BAUMASCHINEN
Gebrauchtmaschinen Pool Karl-Bröger-Strasse 8 - Alsfeld
2004 CAT 824G
USD $112,742 
2004 CAT 824G

BIG MACHINERY BV
Velddriel, The Netherlands
2004 CAT 824G
USD $112,207 
2004 CAT 824G

BIG MACHINERY BV
Velddriel, The Netherlands
1996 CAT 824G
USD $250,000 
1996 CAT 824G

SUKUT EQUIPMENT & PARTS
San Bernardino, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.