9Y-0066 FASTENER GP-OIL PAN S/N 6NC1-UP; R6J1-UP; 08Z1-UP 330B L EXCAVATOR

BASIC ENGINE

PAN GP-OIL

0. 9Y-0066 FASTENER G

FLYWHEEL GP

1. 7C-4441 FLYWHEEL G

GEAR GP

2. 4P-9858 GEAR GP-FR

HOUSING GP-FLYWHEEL

3. 8N-2395 HOUSING GP

GEAR GP

4. 8N-0303 HOUSING GP

CYLINDER HEAD GP

5. 398-9357 KIT-CYLIND
6. 391-8256 KIT-CYLIND

SERVICE EQUIPMENT AND SUPPLIES

KIT-REBUILD

7. 20R-1427 KIT-ENGINE
8. 20R-1428 KIT-ENGINE
9. 20R-1439 KIT-ENGINE
0. INFORMATION

EXCAVATOR 330B L EXCAVATOR 1JS
3306 Engine Rebuild Kit and Related Parts for 330/330B Excavator 1JS00001-UP (MACHINE) SEBP5536 330B L 1JS (1996)

BASIC ENGINE

PAN GP-OIL

2P-6200 FASTENER GP-OIL PAN

4P-5814 FASTENER GP-OIL PAN

9Y-0066 FASTENER GP-OIL PAN

128-0083 PAN GP-OIL

198-6020 PAN GP-OIL

7E-4236 PAN GP-OIL

#SEBP55360030

9Y-0066: FASTENER GP-OIL PAN

FASTENER GP-OIL PAN

9Y-0066 FASTENER GP-OIL PAN
S/N 6NC1-UP; R6J1-UP; 08Z1-UP

i04998911 SEBP5536

For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	0T-0573	[5]	BOLT (3/8-16X2.75-IN)
2.	5M-2894	[46]	WASHER-HARD (10.2X18.5X2.5-MM THK)
3.	0S-1591	[20]	BOLT (3/8-16X1.5-IN)
4.	3B-1915	[18]	BOLT (3/8-16X1.375-IN)
5.	9Y-0630	[2]	PLATE
6.	0L-1352	[3]	BOLT (3/8-16X3.25-IN)
7.	9Y-0629	[1]	PLATE

#SEBP55360031

7C-4441: FLYWHEEL GP

FLYWHEEL GP

7C-4441 FLYWHEEL GP
S/N 6NC1-UP; R6J1-UP; 08Z1-UP; 10Z1-UP; 13Z1-UP

i00406851 SEBP5536

For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	0S-1600	[9]	BOLT (5/8-18X2.5-IN)
2.	7C-4442	[1]	FLYWHEEL AS
	7N-9146	[1]	GEAR (156-TEETH)

#SEBP55360032

4P-9858: GEAR GP-FRONT

GEAR GP-FRONT

4P-9858 GEAR GP-FRONT
S/N 6NC1-UP; R6J1-UP; 08Z1-UP; 10Z1-UP; 13Z1-UP

i00374206 SEBP5536

For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7N-2602	[1]	BOLT (5/8-11X2-IN)
2.	7N-2994	[1]	WASHER (49.3X16.25X12.3-MM THK)
3.	8N-4960	[1]	PLATE-THRUST
4.	0S-1618	[2]	BOLT (5/16-18X1-IN)
5.	170-7502	[1]	SHAFT-DRIVE IDLER
6.	0S-1748	[4]	BOLT (3/8-24X2-IN)
7.	5M-2894	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
8.	196-0224	[1]	GEAR AS-IDLER (50-TEETH)
	196-9988	[1]	BUSHING
9.	4P-7826	[1]	GEAR-CAMSHAFT (66-TEETH)
10.	4P-7822	[1]	WEIGHT AS
10A.	9N-5766	[2]	WEIGHT
10B.	1W-5879	[2]	SPRING (54.6MM LONG)
10C.	1W-5878	[2]	SPRING (35.7MM LONG)
10D.	9N-5767	[2]	SLIDE
10E.	9N-5765	[1]	PLATE-END
10F.	4B-1273	[2]	SCREW-MACHINE (10-24X0.5-IN)
10G.	8N-0498	[1]	SEAL-FACE
10H.	6F-4718	[1]	SEAL-O-RING
11.	0S-1594	[2]	BOLT (3/8-16X1-IN)
12.	196-0028	[1]	GEAR AS-IDLER (47-TEETH)
	195-0302	[1]	BUSHING
13.	5B-9079	[1]	NUT-JAM (3/8-24-THD)

#SEBP55360033

8N-2395: HOUSING GP-FLYWHEEL

HOUSING GP-FLYWHEEL

8N-2395 HOUSING GP-FLYWHEEL
S/N 6NC1-UP; R6J1-UP; 08Z1-UP; 10Z1-UP; 13Z1-UP

i00429630 SEBP5536

For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-0645 B	[1]	PLUG-CUP
2.	5F-0304	[2]	PLUG (FLYWHEEL HOUSING)
	2A-1162	[2]	GASKET
3.	8T-6765	[1]	PLUG-PIPE (1/4-18-THD)
4.	7X-7730	[1]	PLUG-PIPE
5.	7X-7731	[1]	PLUG-PIPE (3/4-14-THD)
6.	1A-1460	[13]	BOLT (1/2-13X2-IN)
7.	9H-5921	[1]	GASKET
8.	143-0814	[1]	HOUSING-FLYWHEEL
9.	8S-0527 B	[1]	PLUG-CUP
10.	8T-6760	[1]	PLUG-PIPE (1-1/2-11-1/2 NPT)
	B		USE AS REQUIRED

#SEBP55360034

8N-0303: HOUSING GP-FRONT

HOUSING GP-FRONT

8N-0303 HOUSING GP-FRONT
S/N 6NC1-UP; R6J1-UP; 08Z1-UP; 10Z1-UP; 13Z1-UP

i00428134 SEBP5536

For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6I-0923	[1]	HOUSING AS-FRONT
2.	9X-2485	[6]	STUD
3.	1W-7816	[1]	PLATE AS
	5M-6214	[1]	PLUG (1/8-27 PTF)
4.	6H-0192	[3]	STUD
5.	8N-0110	[1]	GASKET-FRONT PLATE
6.	1W-3900	[1]	GASKET

#SEBP55360035

398-9357: KIT-CYLINDER HEAD

KIT-CYLINDER HEAD

398-9357 KIT-CYLINDER HEAD
S/N 9PJ1-UP; 6SK1-UP; 8RL1-UP; 9ML1-UP; 8SR1-UP; 8TR1-UP; 1JS1-UP; 5EZ1-UP
OPTIONAL REBUILD CYLINDER HEAD REBUILD KIT FOR 3306 ENGINE
FOR USE WITH @@@@@144-6303@@@@@, @@@@@116-7568@@@@@, @@@@@118-9730@@@@@, @@@@@122-9790@@@@@
FIELD INSTALLATION

i05267586 SEBP5536

For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
148-7425	[12]	GUIDE-VALVE (STANDARD)
154-6997 AB		GUIDE-VALVE (0.51-MM OS)
154-6998 AB		GUIDE-VALVE (0.13-MM OS)
107-0265	[6]	INSERT-VALVE SEAT (EXHAUST)(STANDARD)
AB		INSERT-VALVE SEAT (0.13-MM OS, EXHAUST)
AB		INSERT-VALVE SEAT (0.25-MM OS, EXHAUST)
AB		INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)
AB		INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)
107-0268	[6]	INSERT-VALVE SEAT (INLET)(STANDARD)
AB		INSERT-VALVE SEAT (0.13-MM OS, INLET)
AB		INSERT-VALVE SEAT (0.25-MM OS, INLET)
AB		INSERT-VALVE SEAT (0.51-MM OS, INLET)
AB		INSERT-VALVE SEAT (0.76-MM OS, INLET)
2A-4429	[24]	LOCK-RETAINER
8T-6762	[3]	PLUG-PIPE (1/2-14-THD)
8T-6763	[1]	PLUG-PIPE (1/4-18-THD)
1W-5300	[12]	ROTOCOIL AS
		(EACH INCLUDES)
6N-7174	[1]	SHIELD-OIL
7N-8018	[6]	SEAL
9Y-1798	[18]	SEAL
3S-5496	[2]	SEAL-O-RING
7S-7144	[12]	SPRING-VALVE
148-7455	[6]	VALVE-EXHAUST
100-7860	[6]	VALVE-INLET
A		NOT PART OF THIS GROUP
B		USE AS REQUIRED

#SEBP55360036

391-8256: KIT-CYLINDER HEAD GASKET

KIT-CYLINDER HEAD GASKET

391-8256 KIT-CYLINDER HEAD GASKET
S/N 8TR1-UP
CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD.. INCLUDES THE TURBO GASKETS BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED.. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY.. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS, ETC.. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750 & UP
FIELD REPLACEMENT FOR 142-0228 KIT-GASKET
FIELD INSTALLATION

i05106252 SEBP5536

For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
8M-2295	[4]	BOLT (3/8-16X1.625-IN)
1H-7666	[1]	GASKET
1P-0451	[1]	GASKET (TURBOCHARGER)
1S-4295	[1]	GASKET (TURBOCHARGER)
5S-6735	[2]	GASKET
7N-0200	[1]	GASKET
7N-0944	[1]	GASKET (WATER TEMPERATURE REGULATOR)
8H-9788	[1]	GASKET
188-6126	[1]	GASKET
111-8015	[1]	GASKET AS-CYLINDER HEAD
2P-6132	[1]	GASKET-ELBOW
9S-7083	[1]	GASKET-INLET
9Y-1979	[3]	GASKET-MANIFOLD
1S-4810	[1]	GASKET-OIL DRAIN
1S-6595	[1]	GASKET-OIL SUPPLY
115-7550	[1]	GASKET-PLATE
2N-2766	[4]	LOCKNUT (3/8-16-THD)
7N-8018	[6]	SEAL
9Y-1798	[18]	SEAL
2M-9780	[1]	SEAL-O-RING
3J-1907	[1]	SEAL-O-RING
3J-7354	[1]	SEAL-O-RING
3K-0360	[1]	SEAL-O-RING
3S-5496	[2]	SEAL-O-RING
4L-8337	[2]	SEAL-O-RING
5M-5860	[2]	SEAL-O-RING
5H-7704	[2]	SEAL-O-RING
8H-2046	[1]	SEAL-O-RING
8M-4448	[1]	SEAL-O-RING
9M-4849	[1]	SEAL-O-RING
133-1247	[1]	SEAL-VALVE COVER

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED
8H-9204	[6]	WASHER-FELT (19/32X7/8X5/16-IN THK)

#SEBP55360037

20R-1427: KIT-ENGINE OVERHAUL

KIT-ENGINE OVERHAUL

20R-1427 KIT-ENGINE OVERHAUL
S/N 6NC1-UP; 08Z1-UP
(GOLD KIT OVERHAUL)
FOR USE WITH @@@@@118-9730@@@@@, 3306 MACHINE ENGINE

i04987268 SEBP5536

For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
393-2643 Y	[1]	KIT-ENGINE OVERHAUL (BRONZE)

0R-3043	[6]	CYLINDER PACK GP
		(EACH INCLUDES)
2W-1707	[1]	RING-PISTON (TOP)
5P-8768 Y	[1]	KIT-GASKET (SINGLE CYLINDER LINER)
2W-1708	[1]	RING-PISTON (INTERMEDIATE)
110-5800	[1]	LINER-CYLINDER BLOCK
7N-9805	[1]	PIN-PISTON
168-4531	[1]	BODY AS-PISTON
0R-0914	[1]	ROD AS-CONNECTING
1P-9956	[2]	BOLT-CONNECTING ROD
5S-6348	[2]	NUT (1/2-20-THD)
8N-1849	[1]	BEARING-CONNECTING ROD
1S-9543	[2]	RETAINER-PIN
6I-0497	[1]	RING-PISTON (OIL)

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP55360038

20R-1428: KIT-ENGINE OVERHAUL

KIT-ENGINE OVERHAUL

20R-1428 KIT-ENGINE OVERHAUL
S/N R6J1-UP; 8SR1-UP; 8TR1-UP; 10Z1-UP; 13Z1-UP
(GOLD KIT OVERHAUL)
FOR USE WITH @@@@@122-9790@@@@@, @@@@@144-6303@@@@@, @@@@@116-7567@@@@@, @@@@@145-3275@@@@@, @@@@@139-5531@@@@@, 3306 MACHINE ENGINE

i04989146 SEBP5536

For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
393-2643 Y	[1]	KIT-ENGINE OVERHAUL (BRONZE)

10R-3637	[6]	CYLINDER PACK AS
		(EACH INCLUDES)
6I-0497	[1]	RING-PISTON (OIL)
110-5800	[1]	LINER-CYLINDER BLOCK
156-8263	[1]	BODY AS-PISTON
7N-9805	[1]	PIN-PISTON
0R-0914	[1]	ROD AS-CONNECTING
1P-9956	[2]	BOLT-CONNECTING ROD
5S-6348	[2]	NUT (1/2-20-THD)
8N-1849	[1]	BEARING-CONNECTING ROD
1S-9543	[2]	RETAINER-PIN
2W-1707	[1]	RING-PISTON (TOP)
5P-8768 Y	[1]	KIT-GASKET (SINGLE CYLINDER LINER)
5S-6750	[1]	RING-PISTON (INTERMEDIATE)

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP55360039

20R-1439: KIT-ENGINE OVERHAUL

KIT-ENGINE OVERHAUL

20R-1439 KIT-ENGINE OVERHAUL
S/N 6NC1-UP; R6J1-UP; 08Z1-UP
(GOLD KIT OVERHAUL)
FOR USE WITH @@@@@116-7568@@@@@, 3306 MACHINE ENGINE

i04988638 SEBP5536

For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
393-5181 Y	[1]	KIT-ENGINE OVERHAUL (BRONZE)

10R-3637	[6]	CYLINDER PACK AS
		(EACH INCLUDES)
6I-0497	[1]	RING-PISTON (OIL)
110-5800	[1]	LINER-CYLINDER BLOCK
156-8263	[1]	BODY AS-PISTON
7N-9805	[1]	PIN-PISTON
0R-0914	[1]	ROD AS-CONNECTING
1P-9956	[2]	BOLT-CONNECTING ROD
5S-6348	[2]	NUT (1/2-20-THD)
8N-1849	[1]	BEARING-CONNECTING ROD
1S-9543	[2]	RETAINER-PIN
2W-1707	[1]	RING-PISTON (TOP)
5P-8768 Y	[1]	KIT-GASKET (SINGLE CYLINDER LINER)
5S-6750	[1]	RING-PISTON (INTERMEDIATE)

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT:

		HTTPS://DEALER.CAT.COM/RELATED
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION