108-1545 PUMP GP-GOV & FUEL INJ S/N R6J1-UP; 10Z1-UP; 13Z1-UP 330B L EXCAVATOR

FUEL SYSTEM

GOVERNOR GP

0. 108-1545 PUMP GP-GO
1. 128-8806 PUMP GP-GO

TORQUE CONTROL GP

2. 8N-7276 TORQUE CON

ELECTRICAL AND STARTING SYSTEM

ALTERNATOR GP-CHARGING

3. 169-3345 ALTERNATOR
4. 7E-9406 ALTERNATOR

SENSOR GP

5. 132-5381 SENSOR GP-
6. 189-5746 SENSOR GP-

SOLENOID GP-SHUTOFF

7. 6I-2108 SOLENOID G

STARTING MOTOR GP

8. 207-1560 STARTING M
9. 207-1561 STARTING M
0. INFORMATION

EXCAVATOR 330B L EXCAVATOR 1JS
3306 Engine Rebuild Kit and Related Parts for 330/330B Excavator 1JS00001-UP (MACHINE) SEBP5536 330B L 1JS (1996)

FUEL SYSTEM

GOVERNOR GP

2W-2410 GOVERNOR GP

128-7984 PROTECTION GP-FUEL SYSTEM

108-1545 PUMP GP-GOV & FUEL INJ

128-8806 PUMP GP-GOV & FUEL INJ

#SEBP55360120

108-1545: PUMP GP-GOV & FUEL INJ

PUMP GP-GOV & FUEL INJ

108-1545 PUMP GP-GOV & FUEL INJ
S/N R6J1-UP; 10Z1-UP; 13Z1-UP

i04989074 SEBP5536

1081545 PUMP GP-GOV & FUEL INJ Parts scheme

For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	108-1548 Y	[1]	PUMP GP-FUEL INJECTION
2.	7L-8056	[1]	SPRING
3.	7N-1052	[1]	DOWEL
4.	7N-2176	[1]	PIN-DETENT
5.	2W-9657	[1]	SPRING-DETENT
6.	8N-3088	[1]	SHAFT AS-THROTTLE
7.	8N-6680	[1]	SCREEN AS
8.	3J-1907	[1]	SEAL-O-RING
8A.	5P-6620	[1]	SEAL-O-RING
8B.	8J-8343	[1]	SEAL-O-RING
8C.	8M-8515	[1]	SEAL-O-RING
8D.	033-5879	[1]	SEAL-O-RING
8E.	144-0477	[1]	GASKET
8F.	150-3726	[1]	GASKET
8G.	150-3727	[1]	GASKET-FUEL
9.	7C-8993 Y	[1]	FASTENER GP-FUEL INJ PUMP
10.	8N-7276 Y	[1]	TORQUE CONTROL GP
11.	2W-2410 Y	[1]	GOVERNOR GP
12.	2W-5448	[1]	COVER
13.	8N-5784	[1]	DEFLECTOR-PULSE
14.	5H-6552	[1]	SETSCREW-SOCKET (10-32X1.25-IN)
15.	8L-5832	[1]	NUT-HEX (10-32-THD)
16.	7N-9907	[1]	COVER
17.	111-5162 Y	[1]	CONTROL GP-FUEL RATIO
18.	6V-5894	[2]	BOLT (1/4-20X3.75-IN)
19.	5P-0537	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
20.	2D-6392	[1]	SEAL-O-RING
21.	4W-5735	[1]	LEVER AS-PIVOT
	8L-5832	[1]	NUT-HEX (10-32-THD)
	115-1249	[1]	SETSCREW-SOCKET
22.	4W-5734	[1]	LEVER AS
	6V-6835	[1]	SETSCREW-SOCKET (10-32X0.625-IN)
	8L-5832	[1]	NUT-HEX (10-32-THD)
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP55360121

128-8806: PUMP GP-GOV & FUEL INJ

PUMP GP-GOV & FUEL INJ

128-8806 PUMP GP-GOV & FUEL INJ
S/N 6NC1-UP; R6J1-UP; 08Z1-UP

i00522152 SEBP5536

1288806 PUMP GP-GOV & FUEL INJ Parts scheme

For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	111-3769 Y	[1]	PUMP GP-FUEL INJECTION
2.	7L-8056	[1]	SPRING
3.	7N-1052	[1]	DOWEL
4.	7N-2176	[1]	PIN-DETENT
5.	2W-9657	[1]	SPRING-DETENT
6.	8N-3088	[1]	SHAFT AS-THROTTLE
7.	2D-6392	[1]	SEAL-O-RING
8.	8N-6680	[1]	SCREEN AS
9.	7C-8993 Y	[1]	FASTENER GP-FUEL INJ PUMP
10.	8N-7276 Y	[1]	TORQUE CONTROL GP
11.	2W-2410 Y	[1]	GOVERNOR GP
12.	2W-5448	[1]	COVER
	144-0477	[1]	GASKET
13.	8N-5784	[1]	DEFLECTOR-PULSE
14.	5H-6552	[1]	SETSCREW-SOCKET (10-32X1.25-IN)
15.	8L-5832	[1]	NUT-HEX (10-32-THD)
16.	7N-9907	[1]	COVER
	150-3727	[1]	GASKET-FUEL
17.	111-5162	[1]	CONTROL GP-FUEL RATIO
18.	6V-5894	[2]	BOLT (1/4-20X3.75-IN)
19.	5P-0537	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
20.	4W-5735	[1]	LEVER AS-PIVOT
21.	6V-6835	[1]	SETSCREW-SOCKET (10-32X0.625-IN)
22.	8L-5832	[1]	NUT-HEX (10-32-THD)
23.	4W-5734	[1]	LEVER AS
	6V-6835	[1]	SETSCREW-SOCKET (10-32X0.625-IN)
	8L-5832	[1]	NUT-HEX (10-32-THD)
24.	033-5879	[1]	SEAL-O-RING
25.	8J-8343	[1]	SEAL-O-RING
26.	5P-6620	[1]	SEAL-O-RING
27.	150-3726	[1]	GASKET
28.	3J-1907	[1]	SEAL-O-RING
29.	8M-8515	[1]	SEAL-O-RING
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP55360122

8N-7276: TORQUE CONTROL GP

TORQUE CONTROL GP

8N-7276 TORQUE CONTROL GP
S/N 6NC1-UP; R6J1-UP; 08Z1-UP; 10Z1-UP; 13Z1-UP
PART OF 108-1545, 128-8806 PUMP GP-GOV & FUEL INJ

i00414025 SEBP5536

For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7N-1796 C	[1]	SPACER (1.549-MM THK)
2.	8N-7519	[1]	SPRING-TORQUE (0.635-MM THK)
3.	2W-7234	[1]	BAR-LOAD STOP (4-MM)
4.	6L-5897 C	[2]	BOLT (1/4-20X0.875-IN)
5.	8M-9062	[1]	RETAINER-SPRING (3.05-MM THK)
6.	2P-2685	[1]	SPACER (0.635-MM THK)
7.	1P-6452	[1]	INSULATOR
8.	7W-5700 C	[1]	CONTACT
	C		CHANGE FROM PREVIOUS TYPE

#SEBP55360123

169-3345: ALTERNATOR GP-CHARGING

ALTERNATOR GP-CHARGING

169-3345 ALTERNATOR GP-CHARGING
S/N 8SR1-UP; 8TR1-UP
24 VOLT, 50 AMPERE
PART OF 7E-9406 ALTERNATOR GP-CHARGING

i01420722 SEBP5536

1693345 ALTERNATOR GP-CHARGING Parts scheme

For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	185-2653	[1]	FRAME
2.	185-2652	[1]	FRAME AS
3.	185-2639	[1]	FAN AS
4.	185-2640	[1]	FRAME AS
5.	185-2645	[1]	FRAME
6.	2K-4821	[1]	LOCKNUT (5/8-18-THD)
7.	5P-8247	[1]	WASHER-HARD (17X32X3.5-MM THK)
8.	228-9657	[1]	COVER AS
10.	185-2647	[1]	GROMMET
11.	9L-6770	[1]	CAP-DUST
12.	190-0065	[1]	STATOR AS-ALTERNATOR
13.	185-2638	[2]	COLLAR
14.	185-2654	[1]	PLATE
15.	185-2650	[1]	ROTOR AS
16.	185-2644	[1]	COIL AS
17.	185-2648	[1]	REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR)
18.	6V-8189	[1]	NUT (5/16-18-THD)
19.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
20.	3F-9556	[1]	LOCKWASHER
21.	5S-7349	[1]	BOLT (1/4-20X0.5-IN)
22.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
23.	1H-3244	[1]	LOCKWASHER

			AVAILABLE REPAIR KIT(S):
	185-2655	[1]	KIT-BEARING (ALTERNATOR)
			(INCLUDES BEARINGS)
	199-8436	[1]	KIT-TERMINAL (ALTERNATOR AIR)
			(INCLUDES HOLDER AS, PLATE, INSULATOR, PIN, BOLT KITS, GROMMET & NUT)
	199-7891	[1]	KIT-TERMINAL (ALTERNATOR AIR)
			(INCLUDES INSULATORS, WASHERS & NUTS)
	185-2658	[1]	KIT-HARDWARE (ALTERNATOR AIR)
			(INCLUDES BOLT KITS)

#SEBP55360124

7E-9406: ALTERNATOR GP-CHARGING

ALTERNATOR GP-CHARGING

7E-9406 ALTERNATOR GP-CHARGING
S/N 8SR1-UP; 8TR1-UP

i04989693 SEBP5536

7E9406 ALTERNATOR GP-CHARGING Parts scheme

For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	169-3345 Y	[1]	ALTERNATOR GP-CHARGING (24-VOLT, 50-AMPERE)
2.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
3.	8S-4183	[1]	STRAP
4.	2S-6735	[1]	SPACER (0.531X1.12X0.272-IN THK)
5.	5P-2566	[2]	BOLT (1/2-13X1.5-IN)
6.	8T-7971	[1]	WASHER-HARD (13.5X25.5X5-MM THK)
7.	9S-6129	[1]	PULLEY-ALTERNATOR DRIVE
8.	9S-1240	[1]	BRACKET AS
9.	5S-7383	[1]	BOLT (3/8-16X1.75-IN)
10.	7S-6723	[1]	BRACKET-ALTERNATOR
11.	8T-7008	[1]	BOLT (3/8-16X3-IN)
12.	7X-0338	[1]	BOLT (1/2-13X6-IN)
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP55360125

132-5381: SENSOR GP-ENGINE

SENSOR GP-ENGINE

132-5381 SENSOR GP-ENGINE
S/N 8SR1-UP; 8TR1-UP

i01945913 SEBP5536

For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-6455	[1]	SWITCH AS-PRESSURE
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACEL AS & WEDGE)
2.	3J-1907	[1]	SEAL-O-RING
3.	189-5746 Y	[1]	SENSOR GP-SPEED (FLYWHEEL)
4.	8T-3285	[1]	ADAPTER
5.	128-8945	[1]	SENDER-TEMPERATURE
	4I-5490 M	[2]	SCREW-MACHINE (M4X0.7X6-MM)
	095-0826	[2]	LOCKWASHER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP55360126

189-5746: SENSOR GP-SPEED

SENSOR GP-SPEED

189-5746 SENSOR GP-SPEED
S/N 8SR1-UP; 8TR1-UP
PART OF 132-5381 SENSOR GP-ENGINE

i01833192 SEBP5536

For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	171-5349	[1]	STRAP-MARKER
2.	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
3.	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
4.	9X-1386 E		SLEEVE (14-CM)
	E		ORDER BY THE CENTIMETER

#SEBP55360127

6I-2108: SOLENOID GP-SHUTOFF

SOLENOID GP-SHUTOFF

6I-2108 SOLENOID GP-SHUTOFF
S/N 6NC1-UP; R6J1-UP; 08Z1-UP; 10Z1-UP; 13Z1-UP

i00393425 SEBP5536

For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-0537	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
2.	2A-5546	[2]	BOLT (1/4-20X1.375-IN)
3.	6I-2002	[1]	GASKET
4.	155-4653	[1]	SOLENOID AS (FUEL SHUTOFF)
5.	4B-4274	[1]	WASHER (5.5X13X1.2-MM THK)
	6V-8378	[1]	NUT (10-32-THD)
6.	6V-8377	[2]	NUT (8-32-THD)
	9B-7233	[2]	LOCKWASHER

#SEBP55360128

207-1560: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

207-1560 STARTING MOTOR GP-ELECTRIC
S/N 8SR1-UP; 8TR1-UP
24-VOLT
PART OF 7S-3622 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT FOR @@@@@207-1561@@@@@

i05000441 SEBP5536

For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
	207-1561 Y	[1]	STARTING MOTOR GP-ELECTRIC (24-VOLT)
	Y		SEPARATE ILLUSTRATION

#SEBP55360129

207-1561: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

207-1561 STARTING MOTOR GP-ELECTRIC
S/N 8SR1-UP; 8TR1-UP
24-VOLT
PART OF 207-1560 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@207-1560@@@@@

i05000442 SEBP5536

2071561 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your 330B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3T-3434	[6]	PLUG
2.	7T-3279	[1]	HOUSING AS
3.	8T-8566	[1]	TERMINAL AS
4.	6V-8188	[4]	NUT (1/2-13-THD)
5.	7X-0562	[4]	WASHER-HARD (13.5X19X0.8-MM THK)
6.	3T-3422	[1]	WIRE AS
7.	7T-3278	[1]	HOLDER AS-BRUSH (STARTING MOTOR)
8.	7T-3277	[1]	COIL AS-FIELD
9.	7T-3454	[1]	INSULATOR
10.	283-1107	[1]	KIT-CONNECTOR (STARTING MOTOR)
			(INCLUDES STARTER TERMINAL, BOLT & CONNECTORS)
11.	7T-3451	[1]	KIT-INSULATOR (STARTING MOTOR)
			(INCLUDES INSULATOR TERMINALS & GROMMET)
12.	8T-8569	[1]	INSULATOR-TERMINAL
13.	5S-7349	[4]	BOLT (1/4-20X0.5-IN)
14.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
15.	8H-1141	[4]	SHOE-POLE
16.	3R-8797	[8]	SCREW & WASHER AS (3/8-24X0.72-IN)
17.	7T-3276	[1]	ARMATURE AS (24-VOLT)
18.	3E-7775	[1]	HOUSING AS
19.	4M-1831	[1]	PLUG-LEVER HOUSING
20.	7L-2894	[1]	GASKET
21.	0S-1597	[5]	BOLT (1/4-28X1-IN)
22.	6N-3827	[1]	DRIVE AS-MOTOR
23.	7T-3974	[1]	HOUSING AS-DRIVE
24.	7X-3373	[6]	BOLT (5/16-18X0.88-IN)
25.	376-4353	[1]	KIT-SOLENOID (24-VOLT)(24-VOLT)
			(INCLUDES NUTS, BOLT, COVER, INSTRUCTION SHEET & CONNECTORS)
26.	6V-8378	[3]	NUT (10-32-THD)
27.	8F-1434	[2]	LOCKWASHER
28.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
29.	9X-4824	[2]	COVER-STARTING MOTOR
30.	8T-9884	[1]	KIT-INSULATOR (STARTING MOTOR)
			(INCLUDES INSULATORS & BUSHING)
31.	8C-3655	[1]	KIT-BRUSH (STARTING MOTOR)
			(INCLUDES BRUSHES, SPRINGS, SCREWS, SEAL & SCREW AS)
32.	7T-3268	[1]	KIT-LEVER (STARTING MOTOR)
			(INCLUDES LEVER AS, SEALS, NUT, GASKET & RETAINER)

			AVAILABLE REPAIR KIT(S):
	7T-3267	[1]	KIT-BUSHING (STARTING MOTOR)
			(INCLUDES BUSHINGS, WICKS, CUPS, SEALS, SCREW AS, WASHERS, SPACER & NUT)