BASIC ENGINE
GEAR GPENGINE ARRANGEMENT
CONVERSION GP-ENGINEBASIC ENGINE
LIFTING GP-ENGINEPAN GP-OIL
BASIC ENGINE
GEAR GP
#SEBP55400030
4P-5426: HOUSING GP-FRONT
4P-5426 HOUSING GP-FRONT -ACCESSORY DRIVE
PART OF 376-4846, 376-4847, 376-4848 ENGINE AR-COMPLETE
PART OF 376-4846, 376-4847, 376-4848 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 3516 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 0S-1587 | [4] | BOLT (1/2-13X1.75-IN) | |
| 2. | 1D-4593 | [10] | BOLT (5/8-11X5.5-IN) | |
| 3. | 102-8634 | [1] | HOUSING-ACCESSORY DRIVE | |
| 4. | 1B-4218 | [6] | WASHER (0.39X0.625X0.064-IN THK) | |
| 5. | 2A-5220 | [6] | PLUG | |
| 6. | 8T-6765 | [7] | PLUG-PIPE (1/4-18-THD) | |
| 7. | 8T-6762 | [1] | PLUG-PIPE (1/2-14-THD) | |
| 8. | 8T-6758 | [1] | PLUG-PIPE (1/4-18-THD) | |
| 9. | 9H-8260 | [4] | BOLT (1/2-13X6.25-IN) | |
| 10. | 7N-3049 | [1] | GASKET |
#SEBP55400031
20R-0812: KIT-ENGINE CONVERSION
20R-0812 KIT-ENGINE CONVERSION
3516 MUI TO EUI EMISSIONS RETROFIT EQUIVALENT LEVEL, PROVIDES PARTS TO CONVERT MUI 2W-8864 ENGINE ARRANGEMENT TO EUI 129-5494 ENGINE ARRANGEMENT, TO BE USED IN CONJUNCTION WITH ENGINE OVERHAUL
PART OF 376-3109 CONVERSION AR-ENGINE
FOR USE WITH REHS4159, 3516, 1800 RPM, 29Z818 - 29Z1119
FIELD INSTALLATION
3516 MUI TO EUI EMISSIONS RETROFIT EQUIVALENT LEVEL, PROVIDES PARTS TO CONVERT MUI 2W-8864 ENGINE ARRANGEMENT TO EUI 129-5494 ENGINE ARRANGEMENT, TO BE USED IN CONJUNCTION WITH ENGINE OVERHAUL
PART OF 376-3109 CONVERSION AR-ENGINE
FOR USE WITH REHS4159, 3516, 1800 RPM, 29Z818 - 29Z1119
FIELD INSTALLATION
For full view, you need register
Parts for your 3516 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 10R-4378 | [16] | PISTON & ROD GP | ||
| (EACH INCLUDES) | ||||
| 0R-9200 | [1] | ROD AS-CONNECTING | ||
| 7N-2043 | [1] | DOWEL | ||
| 7N-2405 | [4] | BOLT-CONNECTING ROD | ||
| 118-1655 | [1] | BUSHING (CONNECTING ROD) | ||
| 144-5695 | [1] | RING-PISTON (INTERMEDIATE) | ||
| 211-7826 | [1] | LINER-CYLINDER BLOCK | ||
| 214-6066 | [1] | RING-PISTON (TOP) | ||
| 223-6361 | [1] | RING-PISTON (OIL) | ||
| 253-1238 | [2] | RETAINER-PIN | ||
| 353-5995 | [1] | KIT-SEAL (CYLINDER) | ||
| 7N-2046 | [3] | SEAL-O-RING | ||
| 8N-4707 | [1] | BAND-FILLER | ||
| 352-6061 | [1] | SEAL-LINER | ||
| 0T-0102 | [16] | BOLT (3/8-16X0.625-IN) | ||
| 1B-2790 | [16] | BOLT (5/16-18X1.375-IN) | ||
| 5M-2894 | [16] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 9M-1974 | [16] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 204-5447 | [16] | JET AS-PISTON COOLING (FOR USE WITH 1-PC PISTON ONLY) | ||
| 193-3282 | [16] | RETAINER AS (FOR USE WITH 1-PC PISTON ONLY) | ||
| (EACH INCLUDES) | ||||
| 6V-3537 | [1] | DOWEL | ||
| (PART OF GROUP 282-0645) | ||||
| 0S-1615 | [16] | BOLT (1/4-20X0.75-IN) | ||
| 1B-2714 | [16] | BOLT (1/4-20X2.5-IN) | ||
| 2A-0762 | [16] | BOLT (1/4-20X0.625-IN) | ||
| 4P-2478 | [16] | PLATE | ||
| 5P-0537 | [48] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 6J-2245 | [16] | SEAL-O-RING | ||
| 7E-6508 | [16] | CAP AS | ||
| 8M-2771 | [16] | CLIP | ||
| 9X-0352 | [16] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 10R-3138 | [48] | LIFTER AS | ||
| 121-9840 | [16] | SPACER (2-IN THK) | ||
| 132-6469 Y | [16] | HARNESS AS-WIRING (VALVE MECHANISM) | ||
| 265-7537 | [16] | BRIDGE (INLET) | ||
| 265-7538 | [16] | BRIDGE (EXHAUST) | ||
| 358-0768 | [48] | SCREW-ADJUSTING (1/2-20X2.42-IN) | ||
| (PART OF GROUP 7E-5314) | ||||
| 0R-3495 | [1] | CAMSHAFT-REAR | ||
| 5B-5821 | [1] | DOWEL | ||
| 0R-8721 | [1] | CAMSHAFT AS | ||
| 5B-5821 | [1] | DOWEL | ||
| (PART OF GROUP 7E-5538) | ||||
| 20R-3542 Y | [16] | CYLINDER HEAD GP | ||
| (PART OF GROUP 7E-8758) | ||||
| 101-4197 | [12] | COVER | ||
| 272-0760 | [12] | SEAL-VALVE COVER | ||
| (PART OF GROUP 101-0831) | ||||
| 0S-0509 | [1] | BOLT (3/8-16X0.75-IN) | ||
| 0T-0055 | [1] | BOLT (3/8-16X4.25-IN) | ||
| 0T-0065 | [1] | BOLT (3/8-16X3.5-IN) | ||
| 1F-4111 | [1] | BOLT (5/16-18X3.5-IN) | ||
| 4P-0692 | [2] | CLAMP AS | ||
| 5P-4295 | [1] | CLIP | ||
| 5P-4318 | [1] | ELBOW | ||
| 6B-6205 | [1] | SPACER (0.438X0.875X1.281-IN THK) | ||
| 6V-4589 | [1] | SEAL-O-RING | ||
| 9X-6458 | [1] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 7K-1181 | [1] | STRAP-CABLE | ||
| 030-7972 | [1] | ELBOW | ||
| 030-7982 | [1] | UNION-FLARED | ||
| 111-3388 | [1] | TUBE AS | ||
| 111-3389 | [1] | TUBE AS | ||
| 124-1961 | [2] | COUPLING-PERMANENT | ||
| 174-7088 | [1] | HOSE AS | ||
| 237-2712 | [1] | TUBE AS | ||
| 237-2717 | [1] | TUBE AS | ||
| (PART OF GROUP 101-1246) | ||||
| 0T-0573 | [4] | BOLT (3/8-16X2.75-IN) | ||
| (PART OF GROUP 112-4921) | ||||
| 214-7568 | [1] | SEAL-O-RING | ||
| (PART OF GROUP 112-4922) | ||||
| 8S-2331 | [2] | BOLT-12 POINT HEAD (5/8-11X2-IN) | ||
| 9X-8887 | [2] | BOLT (3/4-10X3-IN) | ||
| 101-1365 | [1] | PLATE-THRUST | ||
| 101-1368 | [2] | WASHER-THRUST (19.5X106X1.9-MM THK) | ||
| 107-2477 | [1] | GEAR AS-IDLER (92/44-TEETH) | ||
| 112-1552 | [2] | SHAFT-IDLER | ||
| 112-1554 | [2] | GEAR AS-IDLER (88-TEETH) | ||
| (PART OF GROUP 112-5674) | ||||
| 1A-2029 | [10] | BOLT (3/8-16X1.125-IN) | ||
| 5M-2894 | [10] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 5P-0840 | [1] | SEAL-O-RING | ||
| 6V-3348 | [1] | SEAL-O-RING | ||
| 7N-4951 | [1] | COVER | ||
| 7N-4952 | [1] | COVER | ||
| 235-3546 | [1] | SEAL-O-RING | ||
| 259-4598 | [1] | SEAL-O-RING | ||
| (PART OF GROUP 112-8106) | ||||
| 165-3931 | [2] | BOLT (3/8-16X1.75-IN) | ||
| 0S-1594 | [2] | BOLT (3/8-16X1-IN) | ||
| 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 6V-4589 | [2] | SEAL-O-RING | ||
| 6V-5048 | [2] | SEAL-O-RING | ||
| 8C-3445 | [1] | CAP-DUST | ||
| 8C-3446 | [1] | VALVE-SAMPLING | ||
| 9S-4190 | [2] | PLUG-O-RING (7/8-14-THD) | ||
| 100-8075 | [1] | CLAMP AS | ||
| 111-3820 | [1] | RING-RETAINING | ||
| 264-0450 | [1] | CLAMP AS | ||
| (PART OF GROUP 115-7860) | ||||
| 0L-1143 | [2] | BOLT (3/8-16X2.5-IN) | ||
| 0S-1588 | [2] | BOLT (3/8-16X1.25-IN) | ||
| 0T-0055 | [2] | BOLT (3/8-16X4.25-IN) | ||
| 0T-0573 | [2] | BOLT (3/8-16X2.75-IN) | ||
| 1A-2029 | [7] | BOLT (3/8-16X1.125-IN) | ||
| 1B-9575 | [8] | BOLT (5/16-18X1.56-IN) | ||
| 1D-4609 | [2] | BOLT (3/4-10X3-IN) | ||
| 1W-8129 | [2] | SUPPORT | ||
| 5M-2894 | [9] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 6I-1418 | [8] | SPACER (8.2X12.7X28.7-MM THK) | ||
| 7E-7950 | [1] | PLATE | ||
| 8N-9885 | [1] | GASKET-COVER | ||
| 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | ||
| 8T-9655 | [16] | MOUNT-ISOLATION | ||
| 9N-0869 | [8] | WASHER-HARD (8.8X25.5X2-MM THK) | ||
| 9S-8752 | [3] | NUT-FULL (3/8-16-THD) | ||
| 176-7503 Y | [2] | CONTROL GP-ENGINE ELECTRONIC | ||
| 111-0349 | [1] | BRACKET-MODULE | ||
| 112-4387 | [2] | ELBOW | ||
| 155-0461 | [1] | PLATE AS | ||
| (PART OF GROUP 121-3321) | ||||
| 0S-1588 | [4] | BOLT (3/8-16X1.25-IN) | ||
| 2W-0752 | [1] | GASKET | ||
| 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 8N-9993 | [1] | COVER-CAMSHAFT | ||
| 117-0066 | [1] | BRACKET-MOUNTING | ||
| (PART OF GROUP 121-3552) | ||||
| 1A-9579 | [8] | BOLT (5/16-18X1.5-IN) | ||
| 4W-3027 | [2] | BREATHER AS (CRANKCASE) | ||
| 4W-3034 | [2] | CLAMP-HOSE | ||
| 5P-0597 | [2] | CLAMP-HOSE | ||
| 7N-7820 | [1] | BOOT | ||
| 9M-1974 | [8] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 033-6031 | [2] | SEAL-O-RING | ||
| 101-4199 | [4] | COVER AS | ||
| 180-3007 | [1] | CLAMP-HOSE | ||
| 217-6692 | [1] | HOSE-TEE | ||
| 272-0760 | [4] | SEAL-VALVE COVER | ||
| (PART OF GROUP 124-5513) | ||||
| 0S-1618 | [30] | BOLT (5/16-18X1-IN) | ||
| 1B-7182 | [32] | BOLT (5/16-18X1.25-IN) | ||
| 2W-3146 | [16] | FLANGE | ||
| 4P-3897 | [4] | MANIFOLD (INTERMEDIATE) | ||
| 6V-5064 | [2] | SEAL-O-RING | ||
| 6V-9027 | [1] | SEAL-O-RING | ||
| 8N-7639 | [16] | ELBOW | ||
| 8T-6761 | [2] | PLUG-PIPE (1-11-1/2 NPT THD) | ||
| 8T-6765 | [2] | PLUG-PIPE (1/4-18-THD) | ||
| 9M-1974 | [30] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 9S-4181 | [2] | PLUG (1-5/16-12-THD) | ||
| 9S-4182 | [1] | PLUG (7/16-20-THD) | ||
| 111-8276 | [1] | MANIFOLD (REAR, LH) | ||
| 111-8277 | [1] | MANIFOLD (REAR, RH) | ||
| 111-9374 | [1] | HOUSING-REGULATOR | ||
| 122-8856 | [2] | GASKET | ||
| 133-8382 | [16] | BRACKET | ||
| 154-1616 | [1] | MANIFOLD (FRONT, LH) | ||
| 154-1617 | [1] | MANIFOLD (FRONT, RH) | ||
| 241-5928 | [16] | GASKET | ||
| 243-2288 | [6] | GASKET | ||
| (PART OF GROUP 130-2018) | ||||
| 7E-2580 | [16] | CLAMP-INJECTOR | ||
| 7F-8698 | [16] | BOLT (7/16-14X3.5-IN) | ||
| 20R-1271 | [16] | INJECTOR GP-FUEL | ||
| (PART OF GROUP 133-5994) | ||||
| 2F-0808 | [4] | SCREW (6X0.25-IN) | ||
| 3S-5126 | [16] | BOLT-HIGH TEMPERATURE (3/8-16X0.625-IN) | ||
| 6V-1943 | [12] | BOLT-HIGH TEMPERATURE (3/8-16X1.125-IN) | ||
| 6V-6753 | [8] | BOLT-HIGH TEMPERATURE (3/8-16X1.375-IN) | ||
| 7E-8516 | [4] | CLAMP | ||
| 125-5375 | [16] | BOLT (3/8-16X1.75-IN) | ||
| 125-5376 | [8] | PLATE-CLAMP (COMPRESSOR) | ||
| 141-2754 | [2] | PLATE-IDENTIFICATION | ||
| 154-8741 | [2] | SEAL-O-RING | ||
| 177-1002 Y | [2] | CARTRIDGE GP-TURBOCHARGER | ||
| 178-2439 | [2] | SEAL AS | ||
| 180-3945 | [2] | COVER-COMPRESSOR | ||
| 188-0471 | [4] | FLANGE-HALF | ||
| 453-7800 | [4] | GASKET-EXHAUST | ||
| 207-1390 | [2] | BELLOWS AS | ||
| 284-0753 | [8] | WASHER (11X25X2.5-MM THK) | ||
| 298-6389 | [8] | SPACER (10.3X19X15-MM THK) | ||
| 300-8579 | [8] | BOLT (3/8-16X2.5-IN) | ||
| 310-2233 | [8] | NUT-FLANGE (3/8-16-THD) | ||
| 329-3716 | [4] | FLANGE-HALF | ||
| (PART OF GROUP 169-7321) | ||||
| (PART OF GROUP 169-7322) | ||||
| 0S-0509 | [2] | BOLT (3/8-16X0.75-IN) | ||
| 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 5P-4255 | [2] | BOLT-LOCKING (3/8-16X1-IN) | ||
| 140-9594 | [1] | BRACKET AS | ||
| 140-9602 | [1] | BRACKET AS | ||
| 165-3929 | [1] | BOLT (3/8-16X1.5-IN) | ||
| 0S-1594 | [4] | BOLT (3/8-16X1-IN) | ||
| 1L-5081 | [8] | SPACER (0.41X0.75X0.56-IN THK) | ||
| 2A-4639 | [8] | BOLT (3/8-16X1.625-IN) | ||
| 3B-1915 | [8] | BOLT (3/8-16X1.375-IN) | ||
| 4S-4869 | [1] | TEE | ||
| 5M-2894 | [20] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 5P-5777 | [1] | ADAPTER-O-RING | ||
| 6V-6609 | [7] | SEAL-O-RING | ||
| 6V-8398 | [3] | SEAL-O-RING | ||
| 6V-8782 | [1] | TEE | ||
| 6V-8801 | [2] | NUT (3/8-16-THD) | ||
| 6V-9002 | [1] | ELBOW | ||
| 6V-9830 | [1] | CAP | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 7N-3368 | [1] | GASKET | ||
| 7N-7878 | [4] | PLATE-COVER | ||
| 8M-0505 | [2] | ADAPTER | ||
| 9G-8140 | [1] | SPACER (10.5X25X15-MM THK) | ||
| 9X-8606 | [2] | CLIP | ||
| 107-0744 | [4] | BLOCK | ||
| 113-4647 | [1] | ADAPTER | ||
| 118-4728 | [2] | ELBOW | ||
| 146-3342 | [2] | COUPLING-PERMANENT | ||
| 180-8424 | [3] | SEAL-O-RING | ||
| 252-5658 | [2] | HOSE AS | ||
| 341-9211 | [8] | GASKET | ||
| 383-6859 | [1] | HOSE AS-WATER | ||
| (PART OF GROUP 161-4087) | ||||
| 0S-1594 | [4] | BOLT (3/8-16X1-IN) | ||
| 0T-0573 | [2] | BOLT (3/8-16X2.75-IN) | ||
| 1A-5964 | [4] | BOLT (3/8-16X4.5-IN) | ||
| 1W-7214 | [2] | ELBOW-DRAIN | ||
| 2P-7636 | [2] | CONNECTOR (3/4-16 STR-THD) | ||
| 4P-4460 | [2] | GASKET | ||
| 5P-9890 | [4] | SEAL-O-RING | ||
| 6I-0804 | [1] | ADAPTER-TURBOCHARGER OIL | ||
| 6I-0805 | [1] | ADAPTER-TURBOCHARGER OIL | ||
| 6V-4589 | [1] | SEAL-O-RING | ||
| 7N-7559 | [2] | GASKET | ||
| 091-0081 | [4] | SPACER (10.5X20X10-MM THK) | ||
| 8L-2786 | [2] | SEAL-O-RING | ||
| 9M-4584 | [1] | CONNECTOR | ||
| 9X-6458 | [1] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 113-4646 | [1] | TUBE AS | ||
| 113-4648 | [1] | ELBOW | ||
| 116-9863 | [1] | BRACKET | ||
| 130-2602 | [1] | TUBE AS | ||
| 166-5932 | [1] | TUBE AS | ||
| 179-1508 | [1] | ELBOW | ||
| 185-5855 | [1] | TUBE | ||
| (PART OF GROUP 162-5719) | ||||
| 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | ||
| 0L-2070 | [26] | BOLT (3/8-16X2.25-IN) | ||
| 1W-1251 | [4] | GASKET | ||
| 3V-3308 | [2] | WASHER-HARD (10.2X20.5X2.5-MM THK) | ||
| 6V-3917 | [4] | SEAL-O-RING | ||
| 6V-5504 | [16] | SEAL-O-RING | ||
| 7N-5079 | [16] | ELBOW | ||
| 7W-1944 | [2] | RETAINER | ||
| 0L-1329 | [2] | BOLT (1/2-13X3-IN) | ||
| 136-9629 | [1] | PLATE | ||
| 140-6458 | [1] | BRACKET | ||
| 140-6463 | [2] | BRACKET | ||
| 149-0233 | [1] | PIPE | ||
| 162-8864 | [1] | ELBOW-TURBOCHARGER EXHAUST | ||
| 164-0866 | [1] | PIPE | ||
| (PART OF GROUP 164-0867) | ||||
| 3B-1915 | [4] | BOLT (3/8-16X1.375-IN) | ||
| 3E-6916 | [112] | NUT-FULL (3/8-16-THD) | ||
| 4P-7680 | [16] | SPACER (10.5X22.5X15-MM THK) | ||
| 7L-6443 | [112] | BOLT-HIGH TEMPERATURE (3/8-16X2.25-IN) | ||
| 9L-7373 | [64] | BOLT-HIGH TEMPERATURE (3/8-16X2-IN) | ||
| 100-3145 | [1] | MANIFOLD-EXHAUST (FRONT, RH) | ||
| 100-3146 | [6] | MANIFOLD-EXHAUST (INTERMEDIATE, RH) | ||
| 100-3147 | [1] | MANIFOLD-EXHAUST (FRONT, LH) | ||
| 100-3148 | [6] | MANIFOLD-EXHAUST (INTERMEDIATE, LH) | ||
| 110-8314 | [224] | WASHER (10.3X18.3X2.66-MM THK) | ||
| 128-9508 | [1] | MANIFOLD-EXHAUST (REAR, RH) | ||
| 162-8865 | [1] | MANIFOLD-EXHAUST (REAR, LH) | ||
| 207-1364 | [14] | BELLOWS AS | ||
| 229-5332 | [16] | SEAL | ||
| 229-5333 | [28] | SEAL | ||
| 254-3261 | [1] | BRACKET AS (RH) | ||
| 254-3262 | [1] | BRACKET AS (LH) | ||
| 222-9921 | [1] | HOUSING-FLYWHEEL | ||
| (PART OF GROUP 101-1269) | ||||
| 1B-4218 | [6] | WASHER (0.39X0.625X0.064-IN THK) | ||
| 2A-5220 | [6] | PLUG | ||
| (PART OF GROUP 4P-5426) | ||||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP55400032
20R-0813: KIT-ENGINE CONVERSION
20R-0813 KIT-ENGINE CONVERSION
3516 MUI TO EUI EMISSIONS RETROFIT EQUIVALENT LEVEL, PROVIDES PARTS TO CONVERT MUI 2W-8864 ENGINE ARRANGEMENT TO EUI 129-5494 ENGINE ARRANGEMENT, TO BE USED IN CONJUNCTION WITH ENGINE OVERHAUL
PART OF 376-3108 CONVERSION AR-ENGINE
FOR USE WITH REHS4159, 3516, 1600 RPM, 29Z818 - 29Z1119
FIELD INSTALLATION
3516 MUI TO EUI EMISSIONS RETROFIT EQUIVALENT LEVEL, PROVIDES PARTS TO CONVERT MUI 2W-8864 ENGINE ARRANGEMENT TO EUI 129-5494 ENGINE ARRANGEMENT, TO BE USED IN CONJUNCTION WITH ENGINE OVERHAUL
PART OF 376-3108 CONVERSION AR-ENGINE
FOR USE WITH REHS4159, 3516, 1600 RPM, 29Z818 - 29Z1119
FIELD INSTALLATION
For full view, you need register
Parts for your 3516 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 193-3282 | [16] | RETAINER AS (FOR USE WITH 1-PC PISTON ONLY) | ||
| (EACH INCLUDES) | ||||
| 6V-3537 | [1] | DOWEL | ||
| 10R-4378 | [16] | PISTON & ROD GP | ||
| (EACH INCLUDES) | ||||
| 0R-9200 | [1] | ROD AS-CONNECTING | ||
| 7N-2043 | [1] | DOWEL | ||
| 7N-2405 | [4] | BOLT-CONNECTING ROD | ||
| 118-1655 | [1] | BUSHING (CONNECTING ROD) | ||
| 144-5695 | [1] | RING-PISTON (INTERMEDIATE) | ||
| 211-7826 | [1] | LINER-CYLINDER BLOCK | ||
| 214-6066 | [1] | RING-PISTON (TOP) | ||
| 223-6361 | [1] | RING-PISTON (OIL) | ||
| 253-1238 | [2] | RETAINER-PIN | ||
| 353-5995 | [1] | KIT-SEAL (CYLINDER) | ||
| 7N-2046 | [3] | SEAL-O-RING | ||
| 8N-4707 | [1] | BAND-FILLER | ||
| 352-6061 | [1] | SEAL-LINER | ||
| 0T-0102 | [16] | BOLT (3/8-16X0.625-IN) | ||
| 1B-2790 | [16] | BOLT (5/16-18X1.375-IN) | ||
| 5M-2894 | [16] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 9M-1974 | [16] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 204-5447 | [16] | JET AS-PISTON COOLING (FOR USE WITH 1-PC PISTON ONLY) | ||
| (PART OF PISTON GROUP-ROD 282-0645) | ||||
| 0S-1615 | [16] | BOLT (1/4-20X0.75-IN) | ||
| 1B-2714 | [16] | BOLT (1/4-20X2.5-IN) | ||
| 2A-0762 | [16] | BOLT (1/4-20X0.625-IN) | ||
| 4P-2478 | [16] | PLATE | ||
| 5P-0537 | [48] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 6J-2245 | [16] | SEAL-O-RING | ||
| 7E-6508 | [16] | CAP AS | ||
| 8M-2771 | [16] | CLIP | ||
| 9X-0352 | [16] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 121-2024 | [16] | BASE AS | ||
| (EACH INCLUDES) | ||||
| 8N-4387 | [2] | DOWEL-HOLLOW | ||
| 10R-3138 | [48] | LIFTER AS | ||
| 121-9840 | [16] | SPACER (2-IN THK) | ||
| 132-6469 Y | [16] | HARNESS AS-WIRING (VALVE MECHANISM) | ||
| 265-7537 | [16] | BRIDGE (INLET) | ||
| 265-7538 | [16] | BRIDGE (EXHAUST) | ||
| 358-0768 | [48] | SCREW-ADJUSTING (1/2-20X2.42-IN) | ||
| (PART OF MECHANISM GROUP 7E-5314) | ||||
| 0R-3495 | [1] | CAMSHAFT-REAR | ||
| 0R-8721 | [1] | CAMSHAFT AS | ||
| 5B-5821 | [1] | DOWEL | ||
| (PART OF CAMSHAFT GROUP-SINGLE 7E-5538) | ||||
| 20R-3542 Y | [16] | CYLINDER HEAD GP | ||
| (PART OF HEAD GROUP-CYLINDER 7E-8758) | ||||
| 101-4197 | [12] | COVER | ||
| 272-0760 | [12] | SEAL-VALVE COVER | ||
| (PART OF COVER GROUP-V MECH 101-0831) | ||||
| 0S-0509 | [1] | BOLT (3/8-16X0.75-IN) | ||
| 0T-0055 | [1] | BOLT (3/8-16X4.25-IN) | ||
| 0T-0065 | [1] | BOLT (3/8-16X3.5-IN) | ||
| 1F-4111 | [1] | BOLT (5/16-18X3.5-IN) | ||
| 4P-0692 | [2] | CLAMP AS | ||
| (EACH INCLUDES) | ||||
| 108-1434 | [1] | GROMMET | ||
| 5P-4318 | [1] | ELBOW | ||
| 6B-6205 | [1] | SPACER (0.438X0.875X1.281-IN THK) | ||
| 6V-4589 | [1] | SEAL-O-RING | ||
| 7K-1181 | [1] | STRAP-CABLE | ||
| 9X-6458 | [1] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 030-7972 | [1] | ELBOW | ||
| 030-7982 | [1] | UNION-FLARED | ||
| 111-3388 | [1] | TUBE AS | ||
| 111-3389 | [1] | TUBE AS | ||
| 124-1961 | [2] | COUPLING-PERMANENT | ||
| 174-7088 | [1] | HOSE AS | ||
| 237-2712 | [1] | TUBE AS | ||
| 237-2717 | [1] | TUBE AS | ||
| (PART OF LINES GROUP-FUEL INJ 101-1246) | ||||
| 0T-0573 | [4] | BOLT (3/8-16X2.75-IN) | ||
| (PART OF FILTER GROUP-OIL 112-4921) | ||||
| 214-7568 | [1] | SEAL-O-RING | ||
| (PART OF FILTER GROUP-FUEL 112-4922) | ||||
| 8S-2331 | [2] | BOLT-12 POINT HEAD (5/8-11X2-IN) | ||
| 1D-4609 | [2] | BOLT (3/4-10X3-IN) | ||
| 101-1368 | [2] | WASHER-THRUST (19.5X106X1.9-MM THK) | ||
| 101-1365 | [1] | PLATE-THRUST | ||
| 107-2477 | [1] | GEAR AS-IDLER (92/44-TEETH) | ||
| 112-1552 | [2] | SHAFT-IDLER | ||
| 112-1554 | [2] | GEAR AS-IDLER (88-TEETH) | ||
| (EACH INCLUDES) | ||||
| 125-9751 | [1] | BUSHING | ||
| (PART OF GEAR GROUP-REAR 112-5674) | ||||
| 1A-2029 | [10] | BOLT (3/8-16X1.125-IN) | ||
| 5M-2894 | [10] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 5P-0840 | [1] | SEAL-O-RING | ||
| 6V-3348 | [1] | SEAL-O-RING | ||
| 7N-4951 | [1] | COVER | ||
| 7N-4952 | [1] | COVER | ||
| 235-3546 | [1] | SEAL-O-RING | ||
| 259-4598 | [1] | SEAL-O-RING | ||
| (PART OF COVER GROUP 112-8106) | ||||
| 165-3931 | [2] | BOLT (3/8-16X1.75-IN) | ||
| 0S-1594 | [2] | BOLT (3/8-16X1-IN) | ||
| 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 6V-4589 | [2] | SEAL-O-RING | ||
| 6V-5048 | [2] | SEAL-O-RING | ||
| 8C-3445 | [1] | CAP-DUST | ||
| 8C-3446 | [1] | VALVE-SAMPLING | ||
| 9S-4190 | [2] | PLUG-O-RING (7/8-14-THD) | ||
| 100-8075 | [1] | CLAMP AS | ||
| 111-3820 | [1] | RING-RETAINING | ||
| 264-0450 | [1] | CLAMP AS | ||
| 9S-8752 | [2] | NUT-FULL (3/8-16-THD) | ||
| (PART OF LINES GROUP-ENGINE OIL 115-7860) | ||||
| 0L-1143 | [2] | BOLT (3/8-16X2.5-IN) | ||
| 0S-1588 | [2] | BOLT (3/8-16X1.25-IN) | ||
| 0T-0055 | [2] | BOLT (3/8-16X4.25-IN) | ||
| 0T-0573 | [2] | BOLT (3/8-16X2.75-IN) | ||
| 1A-2029 | [7] | BOLT (3/8-16X1.125-IN) | ||
| 1B-9575 | [8] | BOLT (5/16-18X1.56-IN) | ||
| 1W-8129 | [2] | SUPPORT | ||
| 5M-2894 | [9] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 6I-1418 | [8] | SPACER (8.2X12.7X28.7-MM THK) | ||
| 7E-7950 | [1] | PLATE | ||
| 8N-9885 | [1] | GASKET-COVER | ||
| 8T-9655 | [1] | MOUNT-ISOLATION | ||
| 9N-0869 | [8] | WASHER-HARD (8.8X25.5X2-MM THK) | ||
| 9S-8752 | [3] | NUT-FULL (3/8-16-THD) | ||
| 176-7503 Y | [2] | CONTROL GP-ENGINE ELECTRONIC | ||
| 111-0349 | [1] | BRACKET-MODULE | ||
| 112-4387 | [2] | ELBOW | ||
| 155-0461 | [1] | PLATE AS | ||
| (PART OF CONTROL GROUP-MTG 121-3321) | ||||
| 0S-1588 | [4] | BOLT (3/8-16X1.25-IN) | ||
| 2W-0752 | [1] | GASKET | ||
| 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 8N-9993 | [1] | COVER-CAMSHAFT | ||
| 117-0066 | [1] | BRACKET-MOUNTING | ||
| (PART OF COVER GROUP 121-3552) | ||||
| 1A-9579 | [8] | BOLT (5/16-18X1.5-IN) | ||
| 4W-3027 | [2] | BREATHER AS (CRANKCASE) | ||
| 4W-3034 | [2] | CLAMP-HOSE | ||
| 5P-0597 | [2] | CLAMP-HOSE | ||
| 7N-7820 | [1] | BOOT | ||
| 9M-1974 | [8] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 033-6031 | [2] | SEAL-O-RING | ||
| 101-4199 | [4] | COVER AS | ||
| 180-3007 | [1] | CLAMP-HOSE | ||
| 217-6692 | [1] | HOSE-TEE | ||
| 272-0760 | [4] | SEAL-VALVE COVER | ||
| (PART OF BEATHER GROUP 124-5513) | ||||
| 0S-1618 | [30] | BOLT (5/16-18X1-IN) | ||
| 1B-7182 | [32] | BOLT (5/16-18X1.25-IN) | ||
| 2W-3146 | [16] | FLANGE | ||
| 4P-3897 | [4] | MANIFOLD (INTERMEDIATE) | ||
| 6V-5064 | [2] | SEAL-O-RING | ||
| 6V-9027 | [1] | SEAL-O-RING | ||
| 8N-7639 | [16] | ELBOW | ||
| 8T-6761 | [2] | PLUG-PIPE (1-11-1/2 NPT THD) | ||
| 8T-6765 | [2] | PLUG-PIPE (1/4-18-THD) | ||
| 9M-1974 | [30] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 9S-4181 | [2] | PLUG (1-5/16-12-THD) | ||
| 9S-4182 | [1] | PLUG (7/16-20-THD) | ||
| 111-8276 | [1] | MANIFOLD (REAR, LH) | ||
| 111-8277 | [1] | MANIFOLD (REAR, RH) | ||
| 111-9374 | [1] | HOUSING-REGULATOR | ||
| 122-8856 | [2] | GASKET | ||
| 133-8382 | [16] | BRACKET | ||
| 154-1616 | [1] | MANIFOLD (FRONT, LH) | ||
| 154-1617 | [116] | MANIFOLD (FRONT, RH) | ||
| 241-5928 | GASKET | |||
| 243-2288 | [6] | GASKET | ||
| (PART OF LINES GROUP-WATER 130-2018) | ||||
| 7E-2580 | [16] | CLAMP-INJECTOR | ||
| 7F-8698 | [16] | BOLT (7/16-14X3.5-IN) | ||
| 20R-1268 | [16] | INJECTOR GP-FUEL | ||
| (PART OF PUMP GROUP-FUEL INJECTOR 133-5994) | ||||
| 6V-1943 | [12] | BOLT-HIGH TEMPERATURE (3/8-16X1.125-IN) | ||
| 6V-6753 | [8] | BOLT-HIGH TEMPERATURE (3/8-16X1.375-IN) | ||
| 10R-8246 | [2] | TURBOCHARGER GP | ||
| 178-2439 | [2] | SEAL AS | ||
| (EACH INCLUDES) | ||||
| 178-2437 | [1] | SEAL | ||
| 178-2438 | [1] | PLATE | ||
| 188-0471 | [4] | FLANGE-HALF | ||
| 207-1382 | [4] | GASKET-EXHAUST | ||
| 284-0753 | [8] | WASHER (11X25X2.5-MM THK) | ||
| 298-6389 | [8] | SPACER (10.3X19X15-MM THK) | ||
| 207-1390 | [2] | BELLOWS AS | ||
| 300-8579 | [8] | BOLT (3/8-16X2.5-IN) | ||
| 310-2233 | [8] | NUT-FLANGE (3/8-16-THD) | ||
| 239-3716 | [4] | PLATE-IDENTIFICATION (PUMP PRESSURE) | ||
| (PART OF TURBO GROUP 159-8828) | ||||
| 0S-0509 | [2] | BOLT (3/8-16X0.75-IN) | ||
| 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 5P-4255 | [2] | BOLT-LOCKING (3/8-16X1-IN) | ||
| 140-9594 | [1] | BRACKET AS | ||
| 140-9602 | [1] | BRACKET AS | ||
| (PART OF LIFTING GROUP 140-9593) | ||||
| 165-3929 | [1] | BOLT (3/8-16X1.5-IN) | ||
| 0S-1594 | [1] | BOLT (3/8-16X1-IN) | ||
| 1L-5081 | [8] | SPACER (0.41X0.75X0.56-IN THK) | ||
| 2A-4639 | [8] | BOLT (3/8-16X1.625-IN) | ||
| 3B-1915 | [8] | BOLT (3/8-16X1.375-IN) | ||
| 4S-4869 | [1] | TEE | ||
| 5M-2894 | [20] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 5P-5777 | [1] | ADAPTER-O-RING | ||
| 6V-6609 | [7] | SEAL-O-RING | ||
| 6V-8398 | [3] | SEAL-O-RING | ||
| 6V-8782 | [1] | TEE | ||
| 6V-8801 | [2] | NUT (3/8-16-THD) | ||
| 6V-9002 | [1] | ELBOW | ||
| 6V-9830 | [1] | CAP | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 7N-3368 | [1] | GASKET | ||
| 7N-7878 | [4] | PLATE-COVER | ||
| 8M-0505 | [2] | ADAPTER | ||
| 9G-8140 | [1] | SPACER (10.5X25X15-MM THK) | ||
| 9X-8606 | [2] | CLIP | ||
| 107-0744 | [4] | BLOCK | ||
| 113-4647 | [1] | ADAPTER | ||
| 118-4728 | [2] | ELBOW | ||
| 146-3342 | [2] | COUPLING-PERMANENT | ||
| 180-8424 | [3] | SEAL-O-RING | ||
| 252-5658 | [2] | HOSE AS | ||
| 341-9211 | [8] | GASKET | ||
| 383-6859 | [1] | HOSE AS-WATER | ||
| (PART OF LINES GROUP-WATER 161-4087) | ||||
| 0S-1594 | [4] | BOLT (3/8-16X1-IN) | ||
| 0T-0573 | [2] | BOLT (3/8-16X2.75-IN) | ||
| 1A-5964 | [4] | BOLT (3/8-16X4.5-IN) | ||
| 1W-7214 | [2] | ELBOW-DRAIN | ||
| 2P-7636 | [2] | CONNECTOR (3/4-16 STR-THD) | ||
| 4P-4460 | [2] | GASKET | ||
| 5P-9890 | [4] | SEAL-O-RING | ||
| 6I-0804 | [1] | ADAPTER-TURBOCHARGER OIL | ||
| 6I-0805 | [1] | ADAPTER-TURBOCHARGER OIL | ||
| 6V-4589 | [1] | SEAL-O-RING | ||
| 7N-7559 | [2] | GASKET | ||
| 091-0081 | [4] | SPACER (10.5X20X10-MM THK) | ||
| 8L-2786 | [2] | SEAL-O-RING | ||
| 9M-4584 | [1] | CONNECTOR | ||
| 9X-6458 | [1] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 113-4646 | [1] | TUBE AS | ||
| 113-4648 | [1] | ELBOW | ||
| 116-9863 | [1] | BRACKET | ||
| 130-2602 | [1] | TUBE AS | ||
| 166-5932 | [1] | TUBE AS | ||
| 179-1508 | [1] | ELBOW | ||
| 185-5855 | [1] | TUBE | ||
| (PART OF LINES GROUP-TURBO 162-5719) | ||||
| 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | ||
| 0L-2070 | [26] | BOLT (3/8-16X2.25-IN) | ||
| 1W-1251 | [4] | GASKET | ||
| 3V-3308 | [2] | WASHER-HARD (10.2X20.5X2.5-MM THK) | ||
| 6V-3917 | [4] | SEAL-O-RING | ||
| 6V-5504 | [16] | SEAL-O-RING | ||
| 7N-5079 | [16] | ELBOW | ||
| 7W-1944 | [2] | RETAINER | ||
| 0L-1329 | [2] | BOLT (1/2-13X3-IN) | ||
| 136-9626 | [1] | PIPE (RH) | ||
| 140-6458 | [1] | BRACKET | ||
| 140-0233 | [2] | RING-BACKUP | ||
| 149-0233 | [1] | PIPE | ||
| 162-8864 | [1] | ELBOW-TURBOCHARGER EXHAUST | ||
| 164-0866 | [1] | PIPE | ||
| (PART OF LINES GROUP-AIR 164-0867) | ||||
| 3B-1915 | [4] | BOLT (3/8-16X1.375-IN) | ||
| 3E-6916 | [112] | NUT-FULL (3/8-16-THD) | ||
| 4P-7680 | [16] | SPACER (10.5X22.5X15-MM THK) | ||
| 7L-6443 | [12] | BOLT-HIGH TEMPERATURE (3/8-16X2.25-IN) | ||
| 9L-7373 | [64] | BOLT-HIGH TEMPERATURE (3/8-16X2-IN) | ||
| 100-3145 | [1] | MANIFOLD-EXHAUST (FRONT, RH) | ||
| 100-3146 | [6] | MANIFOLD-EXHAUST (INTERMEDIATE, RH) | ||
| 100-3147 | [1] | MANIFOLD-EXHAUST (FRONT, LH) | ||
| 100-3148 | [6] | MANIFOLD-EXHAUST (INTERMEDIATE, LH) | ||
| 110-8314 | [224] | WASHER (10.3X18.3X2.66-MM THK) | ||
| 128-9508 | [1] | MANIFOLD-EXHAUST (REAR, RH) | ||
| 162-8865 | [1] | MANIFOLD-EXHAUST (REAR, LH) | ||
| 207-1364 | [14] | BELLOWS AS | ||
| 229-5332 | [16] | SEAL | ||
| 229-5333 | [28] | SEAL | ||
| 254-3261 | [1] | BRACKET AS (RH) | ||
| 254-3262 | [1] | BRACKET AS (LH) | ||
| (PART OF MANIFOLD GROUP-EXHAUST 167-1759) | ||||
| 222-9921 | [1] | HOUSING-FLYWHEEL | ||
| (PART OF HOUSING GROUP-FLY 101-1269) | ||||
| 1B-4218 | [6] | WASHER (0.39X0.625X0.064-IN THK) | ||
| 2A-5220 | [6] | PLUG | ||
| (PART OF HOUSING GROUP-FRONT 4P-5426) | ||||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP55400033
20R-0814: KIT-ENGINE CONVERSION
20R-0814 KIT-ENGINE CONVERSION
3516 MUI TO EUI EMISSIONS RETROFIT EQUIVALENT LEVEL, PROVIDES PARTS TO CONVERT MUI 2W-8864 ENGINE ARRANGEMENT TO EUI 129-5494 ENGINE ARRANGEMENT, TO BE USED IN CONJUNCTION WITH ENGINE OVERHAUL
PART OF 376-3107 CONVERSION AR-ENGINE
FOR USE WITH REHS4159, 3516, 1600 RPM, 29Z818 - 29Z1119
FIELD INSTALLATION
3516 MUI TO EUI EMISSIONS RETROFIT EQUIVALENT LEVEL, PROVIDES PARTS TO CONVERT MUI 2W-8864 ENGINE ARRANGEMENT TO EUI 129-5494 ENGINE ARRANGEMENT, TO BE USED IN CONJUNCTION WITH ENGINE OVERHAUL
PART OF 376-3107 CONVERSION AR-ENGINE
FOR USE WITH REHS4159, 3516, 1600 RPM, 29Z818 - 29Z1119
FIELD INSTALLATION
For full view, you need register
Parts for your 3516 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 193-3282 | [16] | RETAINER AS (FOR USE WITH 1-PC PISTON ONLY) | ||
| (EACH INCLUDES) | ||||
| 6V-3537 | [1] | DOWEL | ||
| 10R-4378 | [16] | PISTON & ROD GP | ||
| (EACH INCLUDES) | ||||
| 0R-9200 | [1] | ROD AS-CONNECTING | ||
| 7N-2043 | [1] | DOWEL | ||
| 7N-2405 | [4] | BOLT-CONNECTING ROD | ||
| 118-1655 | [1] | BUSHING (CONNECTING ROD) | ||
| 144-5695 | [1] | RING-PISTON (INTERMEDIATE) | ||
| 211-7826 | [1] | LINER-CYLINDER BLOCK | ||
| 214-6066 | [1] | RING-PISTON (TOP) | ||
| 223-6361 | [1] | RING-PISTON (OIL) | ||
| 253-1238 | [2] | RETAINER-PIN | ||
| 353-5995 | [1] | KIT-SEAL (CYLINDER) | ||
| 7N-2046 | [3] | SEAL-O-RING | ||
| 8N-4707 | [1] | BAND-FILLER | ||
| 352-6061 | [1] | SEAL-LINER | ||
| 204-5447 | [16] | JET AS-PISTON COOLING (FOR USE WITH 1-PC PISTON ONLY) | ||
| 0T-0102 | [16] | BOLT (3/8-16X0.625-IN) | ||
| 1B-2790 | [16] | BOLT (5/16-18X1.375-IN) | ||
| 5M-2894 | [16] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 9M-1974 | [16] | WASHER-HARD (8.8X16X2-MM THK) | ||
| (PART OF GROUP 282-0645) | ||||
| 0S-1615 | [16] | BOLT (1/4-20X0.75-IN) | ||
| 1B-2714 | [16] | BOLT (1/4-20X2.5-IN) | ||
| 2A-0762 | [16] | BOLT (1/4-20X0.625-IN) | ||
| 4P-2478 | [16] | PLATE | ||
| 5P-0537 | [48] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 6J-2245 | [16] | SEAL-O-RING | ||
| 7E-6508 | [16] | CAP AS | ||
| 8M-2771 | [16] | CLIP | ||
| 9X-0352 | [16] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 10R-3138 | [48] | LIFTER AS | ||
| 121-2024 | [16] | BASE AS | ||
| (EACH INCLUDES) | ||||
| 8N-4387 | [2] | DOWEL-HOLLOW | ||
| 121-9840 | [16] | SPACER (2-IN THK) | ||
| 132-6469 Y | [16] | HARNESS AS-WIRING (VALVE MECHANISM) | ||
| 265-7537 | [16] | BRIDGE (INLET) | ||
| 265-7538 | [16] | BRIDGE (EXHAUST) | ||
| 358-0768 | [48] | SCREW-ADJUSTING (1/2-20X2.42-IN) | ||
| (PART OF GROUP 7E-5314) | ||||
| 0R-3495 | [1] | CAMSHAFT-REAR | ||
| 5B-5821 | [1] | DOWEL | ||
| 0R-8721 | [1] | CAMSHAFT AS | ||
| 5B-5821 | [1] | DOWEL | ||
| (PART OF GROUP 7E-5538) | ||||
| 20R-3542 Y | [16] | CYLINDER HEAD GP | ||
| (PART OF GROUP 7E-8758) | ||||
| 101-4197 | [12] | COVER | ||
| 272-0760 | [12] | SEAL-VALVE COVER | ||
| (PART OF GROUP 101-0831) | ||||
| 0S-0509 | [1] | BOLT (3/8-16X0.75-IN) | ||
| 0T-0055 | [1] | BOLT (3/8-16X4.25-IN) | ||
| 0T-0065 | [1] | BOLT (3/8-16X3.5-IN) | ||
| 1F-4111 | [1] | BOLT (5/16-18X3.5-IN) | ||
| 4P-0692 | [2] | CLAMP AS | ||
| (EACH INCLUDES) | ||||
| 108-1434 | [1] | GROMMET | ||
| 5P-4295 | [1] | CLIP | ||
| 5P-4318 | [1] | ELBOW | ||
| 6B-6205 | [1] | SPACER (0.438X0.875X1.281-IN THK) | ||
| 6V-4589 | [1] | SEAL-O-RING | ||
| 7K-1181 | [1] | STRAP-CABLE | ||
| 9X-6458 | [1] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 030-7972 | [1] | ELBOW | ||
| 030-7982 | [1] | UNION-FLARED | ||
| 111-3388 | [1] | TUBE AS | ||
| 111-3389 | [1] | TUBE AS | ||
| 124-1961 | [2] | COUPLING-PERMANENT | ||
| 174-7088 | [1] | HOSE AS | ||
| 237-2712 | [1] | TUBE AS | ||
| 237-2717 | [1] | TUBE AS | ||
| (PART OF GROUP 101-1246) | ||||
| 0T-0573 | [4] | BOLT (3/8-16X2.75-IN) | ||
| (PART OF GROUP 112-4921) | ||||
| 214-7568 | [1] | SEAL-O-RING | ||
| (PART OF GROUP 112-4922) | ||||
| 8S-2331 | [2] | BOLT-12 POINT HEAD (5/8-11X2-IN) | ||
| 1D-4609 | [2] | BOLT (3/4-10X3-IN) | ||
| 101-1365 | [1] | PLATE-THRUST | ||
| 101-1368 | [2] | WASHER-THRUST (19.5X106X1.9-MM THK) | ||
| 107-2477 | [1] | GEAR AS-IDLER (92/44-TEETH) | ||
| 112-1552 | [2] | SHAFT-IDLER | ||
| 112-1554 | [2] | GEAR AS-IDLER (88-TEETH) | ||
| (EACH INCLUDES) | ||||
| 125-9751 | [1] | BUSHING | ||
| (PART OF GROUP 112-5674) | ||||
| 1A-2029 | [10] | BOLT (3/8-16X1.125-IN) | ||
| 5P-0840 | [1] | SEAL-O-RING | ||
| 5M-2894 | [10] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 6V-3348 | [1] | SEAL-O-RING | ||
| 7N-4951 | [1] | COVER | ||
| 7N-4952 | [1] | COVER | ||
| 235-3546 | [1] | SEAL-O-RING | ||
| 259-4598 | [1] | SEAL-O-RING | ||
| (PART OF GROUP 112-8106) | ||||
| 165-3931 | [2] | BOLT (3/8-16X1.75-IN) | ||
| 0S-1594 | [2] | BOLT (3/8-16X1-IN) | ||
| 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 6V-4589 | [2] | SEAL-O-RING | ||
| 6V-5048 | [2] | SEAL-O-RING | ||
| 8C-3445 | [1] | CAP-DUST | ||
| 8C-3446 | [1] | VALVE-SAMPLING | ||
| 9S-4190 | [2] | PLUG-O-RING (7/8-14-THD) | ||
| 100-8075 | [1] | CLAMP AS | ||
| 111-3820 | [1] | RING-RETAINING | ||
| 264-0450 | [1] | CLAMP AS | ||
| 9S-8752 | [2] | NUT-FULL (3/8-16-THD) | ||
| (PART OF GROUP 115-7860) | ||||
| 155-0461 | [1] | PLATE AS | ||
| 112-4387 | [2] | ELBOW | ||
| 111-0349 | [1] | BRACKET-MODULE | ||
| 176-7503 Y | [2] | CONTROL GP-ENGINE ELECTRONIC | ||
| 9S-8752 | [3] | NUT-FULL (3/8-16-THD) | ||
| 9N-0869 | [8] | WASHER-HARD (8.8X25.5X2-MM THK) | ||
| 8T-9655 | [16] | MOUNT-ISOLATION | ||
| 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | ||
| 8N-9885 | [1] | GASKET-COVER | ||
| 7E-7950 | [1] | PLATE | ||
| 6I-1418 | [8] | SPACER (8.2X12.7X28.7-MM THK) | ||
| 5M-2894 | [9] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 1W-8129 | [2] | SUPPORT | ||
| 1B-9575 | [8] | BOLT (5/16-18X1.56-IN) | ||
| 0L-1143 | [2] | BOLT (3/8-16X2.5-IN) | ||
| 0S-1588 | [2] | BOLT (3/8-16X1.25-IN) | ||
| 0T-0055 | [2] | BOLT (3/8-16X4.25-IN) | ||
| 0T-0573 | [2] | BOLT (3/8-16X2.75-IN) | ||
| 1A-2029 | [7] | BOLT (3/8-16X1.125-IN) | ||
| (PART OF GROUP 121-3321) | ||||
| 0S-1588 | [4] | BOLT (3/8-16X1.25-IN) | ||
| 2W-0752 | [1] | GASKET | ||
| 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 8N-9993 | [1] | COVER-CAMSHAFT | ||
| 117-0066 | [1] | BRACKET-MOUNTING | ||
| (PART OF GROUP 121-3552) | ||||
| 272-0760 | [4] | SEAL-VALVE COVER | ||
| 217-6692 | [1] | HOSE-TEE | ||
| 180-3007 | [1] | CLAMP-HOSE | ||
| 101-4199 | [4] | COVER AS | ||
| 033-6031 | [2] | SEAL-O-RING | ||
| 9M-1974 | [8] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 7N-7820 | [1] | BOOT | ||
| 5P-0597 | [2] | CLAMP-HOSE | ||
| 4W-3034 | [2] | CLAMP-HOSE | ||
| 4W-3027 | [2] | BREATHER AS (CRANKCASE) | ||
| 1A-9579 | [8] | BOLT (5/16-18X1.5-IN) | ||
| (PART OF GROUP 124-5513) | ||||
| 0S-1618 | [30] | BOLT (5/16-18X1-IN) | ||
| 1B-7182 | [32] | BOLT (5/16-18X1.25-IN) | ||
| 2W-3146 | [16] | FLANGE | ||
| 4P-3897 | [4] | MANIFOLD (INTERMEDIATE) | ||
| 6V-5064 | [2] | SEAL-O-RING | ||
| 6V-9027 | [1] | SEAL-O-RING | ||
| 8N-7639 | [16] | ELBOW | ||
| 8T-6761 | [2] | PLUG-PIPE (1-11-1/2 NPT THD) | ||
| 8T-6765 | [2] | PLUG-PIPE (1/4-18-THD) | ||
| 9M-1974 | [30] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 9S-4181 | [2] | PLUG (1-5/16-12-THD) | ||
| 9S-4182 | [1] | PLUG (7/16-20-THD) | ||
| 111-8276 | [1] | MANIFOLD (REAR, LH) | ||
| 111-8277 | [1] | MANIFOLD (REAR, RH) | ||
| 111-9374 | [1] | HOUSING-REGULATOR | ||
| 122-8856 | [2] | GASKET | ||
| 133-8382 | [16] | BRACKET | ||
| 154-1616 | [1] | MANIFOLD (FRONT, LH) | ||
| 154-1617 | [1] | MANIFOLD (FRONT, RH) | ||
| 241-5928 | [16] | GASKET | ||
| 243-2288 | [6] | GASKET | ||
| (PART OF GROUP 130-2018) | ||||
| 7F-8698 | [16] | BOLT (7/16-14X3.5-IN) | ||
| 7E-2580 | [16] | CLAMP-INJECTOR | ||
| 20R-1268 | [16] | INJECTOR GP-FUEL | ||
| (PART OF GROUP 133-5994) | ||||
| 329-3716 | [4] | FLANGE-HALF | ||
| 310-2233 | [8] | NUT-FLANGE (3/8-16-THD) | ||
| 300-8579 | [8] | BOLT (3/8-16X2.5-IN) | ||
| 298-6389 | [8] | SPACER (10.3X19X15-MM THK) | ||
| 284-0753 | [8] | WASHER (11X25X2.5-MM THK) | ||
| 207-1390 | [2] | BELLOWS AS | ||
| 453-7800 | [4] | GASKET-EXHAUST | ||
| 20R-0438 | [2] | TURBOCHARGER GP | ||
| 188-0471 | [4] | FLANGE-HALF | ||
| 178-2439 | [2] | SEAL AS | ||
| (EACH INCLUDES) | ||||
| 178-2437 | [1] | SEAL | ||
| 178-2438 | [1] | PLATE | ||
| 6V-6753 | [8] | BOLT-HIGH TEMPERATURE (3/8-16X1.375-IN) | ||
| 6V-1943 | [12] | BOLT-HIGH TEMPERATURE (3/8-16X1.125-IN) | ||
| 10R-1278 | [16] | INJECTOR GP-FUEL | ||
| (PART OF GROUP 184-3234) | ||||
| 0S-0509 | [2] | BOLT (3/8-16X0.75-IN) | ||
| 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 5P-4255 | [2] | BOLT-LOCKING (3/8-16X1-IN) | ||
| 140-9594 | [1] | BRACKET AS | ||
| 9S-8752 | [2] | NUT-FULL (3/8-16-THD) | ||
| 140-9602 | [1] | BRACKET AS | ||
| (PART OF GROUP 140-9593) | ||||
| 341-9211 | [8] | GASKET | ||
| 383-6859 | [1] | HOSE AS-WATER | ||
| 252-5658 | [2] | HOSE AS | ||
| 180-8424 | [3] | SEAL-O-RING | ||
| 146-3342 | [2] | COUPLING-PERMANENT | ||
| 113-4647 | [1] | ADAPTER | ||
| 107-0744 | [4] | BLOCK | ||
| 118-4728 | [2] | ELBOW | ||
| 9X-8606 | [2] | CLIP | ||
| 9G-8140 | [1] | SPACER (10.5X25X15-MM THK) | ||
| 8M-0505 | [2] | ADAPTER | ||
| 7N-7878 | [4] | PLATE-COVER | ||
| 7N-3368 | [1] | GASKET | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 6V-9830 | [1] | CAP | ||
| 6V-9002 | [1] | ELBOW | ||
| 6V-8801 | [2] | NUT (3/8-16-THD) | ||
| 6V-8782 | [1] | TEE | ||
| 6V-8398 | [3] | SEAL-O-RING | ||
| 5P-5777 | [1] | ADAPTER-O-RING | ||
| 5M-2894 | [20] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 4S-4869 | [1] | TEE | ||
| 3K-0360 | [7] | SEAL-O-RING | ||
| 3B-1915 | [8] | BOLT (3/8-16X1.375-IN) | ||
| 2A-4639 | [8] | BOLT (3/8-16X1.625-IN) | ||
| 1L-5081 | [8] | SPACER (0.41X0.75X0.56-IN THK) | ||
| 0S-1594 | [1] | BOLT (3/8-16X1-IN) | ||
| 165-3929 | [1] | BOLT (3/8-16X1.5-IN) | ||
| (PART OF GROUP 161-4087) | ||||
| 185-5855 | [1] | TUBE | ||
| 179-1508 | [1] | ELBOW | ||
| 166-5932 | [1] | TUBE AS | ||
| 130-2602 | [1] | TUBE AS | ||
| 116-9863 | [1] | BRACKET | ||
| 113-4648 | [1] | ELBOW | ||
| 113-4646 | [1] | TUBE AS | ||
| 9X-6458 | [1] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 9M-4584 | [1] | CONNECTOR | ||
| 8L-2786 | [2] | SEAL-O-RING | ||
| 091-0081 | [4] | SPACER (10.5X20X10-MM THK) | ||
| 7N-7559 | [2] | GASKET | ||
| 6V-4589 | [1] | SEAL-O-RING | ||
| 6I-0805 | [11] | ADAPTER-TURBOCHARGER OIL | ||
| 6I-0804 | ADAPTER-TURBOCHARGER OIL | |||
| 5P-9890 | [4] | SEAL-O-RING | ||
| 4P-4460 | [2] | GASKET | ||
| 2P-7636 | [2] | CONNECTOR (3/4-16 STR-THD) | ||
| 1W-7214 | [2] | ELBOW-DRAIN | ||
| 1A-5964 | [4] | BOLT (3/8-16X4.5-IN) | ||
| 0T-0573 | [2] | BOLT (3/8-16X2.75-IN) | ||
| 0S-1594 | [4] | BOLT (3/8-16X1-IN) | ||
| (PART OF GROUP 162-5719) | ||||
| 164-0866 | [1] | PIPE | ||
| 162-8864 | [1] | ELBOW-TURBOCHARGER EXHAUST | ||
| 149-0233 | [1] | PIPE | ||
| 140-6463 | [2] | BRACKET | ||
| 140-6458 | [1] | BRACKET | ||
| 136-9629 | [1] | PLATE | ||
| 0L-1329 | [2] | BOLT (1/2-13X3-IN) | ||
| 7W-1944 | [2] | RETAINER | ||
| 7N-5079 | [16] | ELBOW | ||
| 6V-5504 | [16] | SEAL-O-RING | ||
| 6V-3917 | [4] | SEAL-O-RING | ||
| 3V-3308 | [2] | WASHER-HARD (10.2X20.5X2.5-MM THK) | ||
| 1W-1251 | [4] | GASKET | ||
| 0L-2070 | [26] | BOLT (3/8-16X2.25-IN) | ||
| 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | ||
| (PART OF GROUP 164-0867) | ||||
| 254-3262 | [1] | BRACKET AS (LH) | ||
| 254-3261 | [1] | BRACKET AS (RH) | ||
| 229-5333 | [28] | SEAL | ||
| 229-5332 | [16] | SEAL | ||
| 207-1364 | [14] | BELLOWS AS | ||
| 162-8865 | [1] | MANIFOLD-EXHAUST (REAR, LH) | ||
| 128-9508 | [1] | MANIFOLD-EXHAUST (REAR, RH) | ||
| 110-8314 | [224] | WASHER (10.3X18.3X2.66-MM THK) | ||
| 100-3148 | [6] | MANIFOLD-EXHAUST (INTERMEDIATE, LH) | ||
| 100-3147 | [1] | MANIFOLD-EXHAUST (FRONT, LH) | ||
| 100-3146 | [6] | MANIFOLD-EXHAUST (INTERMEDIATE, RH) | ||
| 100-3145 | [1] | MANIFOLD-EXHAUST (FRONT, RH) | ||
| 9L-7373 | [64] | BOLT-HIGH TEMPERATURE (3/8-16X2-IN) | ||
| 7L-6443 | [112] | BOLT-HIGH TEMPERATURE (3/8-16X2.25-IN) | ||
| 4P-7680 | [16] | SPACER (10.5X22.5X15-MM THK) | ||
| 3E-6916 | [112] | NUT-FULL (3/8-16-THD) | ||
| 3B-1915 | [4] | BOLT (3/8-16X1.375-IN) | ||
| (PART OF GROUP 167-1759) | ||||
| 222-9921 | [1] | HOUSING-FLYWHEEL | ||
| (PART OF GROUP 101-1269) | ||||
| 1B-4218 | [6] | WASHER (0.39X0.625X0.064-IN THK) | ||
| 2A-5220 | [6] | PLUG | ||
| (PART OF GROUP 4P-5426) | ||||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP55400034
389-1484: KIT-ENGINE CONVERSION
389-1484 KIT-ENGINE CONVERSION
3516 MUI TO EUI EMISSIONS RETROFIT EQUIVALENT LEVEL, PROVIDES PARTS TO UPGRADE THE MUI 2W-8864 ENGINE ARRANGEMENT TO EUI 129-5494 ENGINE ARRANGEMENT, TO BE USED IN CONJUNCTION WITH ENGINE OVERHAUL
PART OF 376-3107 CONVERSION AR-ENGINE
FOR USE WITH REHS4159, 3516, 1600 RPM, 29Z818-1119
FIELD INSTALLATION
3516 MUI TO EUI EMISSIONS RETROFIT EQUIVALENT LEVEL, PROVIDES PARTS TO UPGRADE THE MUI 2W-8864 ENGINE ARRANGEMENT TO EUI 129-5494 ENGINE ARRANGEMENT, TO BE USED IN CONJUNCTION WITH ENGINE OVERHAUL
PART OF 376-3107 CONVERSION AR-ENGINE
FOR USE WITH REHS4159, 3516, 1600 RPM, 29Z818-1119
FIELD INSTALLATION
For full view, you need register
Parts for your 3516 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 314-5005 | [16] | PISTON AS | ||
| 10R-4378 | [1] | PISTON & ROD GP | ||
| 0R-9200 | [1] | ROD AS-CONNECTING | ||
| 7N-2043 | [1] | DOWEL | ||
| 7N-2405 | [4] | BOLT-CONNECTING ROD | ||
| 118-1655 | [1] | BUSHING (CONNECTING ROD) | ||
| 144-5695 | [1] | RING-PISTON (INTERMEDIATE) | ||
| 211-7826 | [1] | LINER-CYLINDER BLOCK | ||
| 214-6066 | [1] | RING-PISTON (TOP) | ||
| 223-6361 | [1] | RING-PISTON (OIL) | ||
| 253-1238 | [2] | RETAINER-PIN | ||
| 353-5995 | [1] | KIT-SEAL (CYLINDER) | ||
| 7N-2046 | [3] | SEAL-O-RING | ||
| 8N-4707 | [1] | BAND-FILLER | ||
| 352-6061 | [1] | SEAL-LINER | ||
| 123-4268 | [16] | RING-PISTON | ||
| 138-8507 | [16] | PIN-PISTON | ||
| 144-4595 | [16] | COVER AS-VALVE MECHANISM | ||
| (EACH INCLUDES) | ||||
| 7C-6514 | [1] | ADAPTER | ||
| 272-2583 | [1] | SEAL-O-RING | ||
| 193-3282 | [16] | RETAINER AS (FOR USE WITH 1-PC PISTON ONLY) | ||
| (EACH INCLUDES) | ||||
| 6V-3537 | [1] | DOWEL | ||
| 204-5447 | [16] | JET AS-PISTON COOLING (FOR USE WITH 1-PC PISTON ONLY) | ||
| 229-1631 | [16] | RING-PISTON | ||
| (ABOVE PARTS ARE PART OF PISTON & ROD GROUP 6I-2861) | ||||
| 0S-1615 | [16] | BOLT (1/4-20X0.75-IN) | ||
| 1B-2714 | [16] | BOLT (1/4-20X2.5-IN) | ||
| 2A-0762 | [16] | BOLT (1/4-20X0.625-IN) | ||
| 5P-0537 | [48] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 4P-2478 | [16] | PLATE | ||
| 6J-2245 | [16] | SEAL-O-RING | ||
| 7E-6508 | [16] | CAP AS | ||
| 8M-2771 | [16] | CLIP | ||
| 9X-0352 | [16] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 121-2024 | [16] | BASE AS | ||
| (EACH INCLUDES) | ||||
| 8N-4387 | [2] | DOWEL-HOLLOW | ||
| 121-9840 | [16] | SPACER (2-IN THK) | ||
| 132-6469 Y | [16] | HARNESS AS-WIRING (VALVE MECHANISM) | ||
| 265-7537 | [16] | BRIDGE (INLET) | ||
| 265-7538 | [16] | BRIDGE (EXHAUST) | ||
| 346-7515 | [48] | LIFTER AS | ||
| (EACH INCLUDES) | ||||
| 7N-3421 | [1] | INSERT-LIFTER | ||
| 358-0768 | [48] | SCREW-ADJUSTING (1/2-20X2.42-IN) | ||
| (ABOVE PARTS ARE PART OF MECHANISM GROUP 7E-5314) | ||||
| 7E-5539 | [1] | CAMSHAFT AS | ||
| 5B-5821 | [1] | DOWEL | ||
| 7E-5540 | [1] | CAMSHAFT-REAR | ||
| 133-4213 | [1] | CAMSHAFT AS | ||
| 5B-5821 | [1] | DOWEL | ||
| (ABOVE PARTS ARE PART OF CAMSHAFT GROUP 7E-5538) | ||||
| 335-6219 Y | [16] | CYLINDER HEAD GP | ||
| (ABOVE PART IS PART OF CYLINDER HEAD GROUP 7E-8758) | ||||
| 101-4197 | [12] | COVER | ||
| 272-0760 | [12] | SEAL-VALVE COVER | ||
| (ABOVE PARTS ARE PART OF COVER GROUP (VALVE MECHANISM) 101-0831) | ||||
| 0S-0509 | [1] | BOLT (3/8-16X0.75-IN) | ||
| 0T-0055 | [1] | BOLT (3/8-16X4.25-IN) | ||
| 0T-0065 | [1] | BOLT (3/8-16X3.5-IN) | ||
| 1F-4111 | [1] | BOLT (5/16-18X3.5-IN) | ||
| 4P-0692 | [2] | CLAMP AS | ||
| (EACH INCLUDES) | ||||
| 108-1434 | [1] | GROMMET | ||
| 5P-4295 | [1] | CLIP | ||
| 5P-4318 | [1] | ELBOW | ||
| 6B-6205 | [1] | SPACER (0.438X0.875X1.281-IN THK) | ||
| 6V-4589 | [1] | SEAL-O-RING | ||
| 9X-6458 | [1] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 7K-1181 | [1] | STRAP-CABLE | ||
| 030-7972 | [1] | ELBOW | ||
| 111-3388 | [1] | TUBE AS | ||
| 111-3389 | [1] | TUBE AS | ||
| 124-1961 | [2] | COUPLING-PERMANENT | ||
| 174-7088 | [1] | HOSE AS | ||
| 237-2712 | [1] | TUBE AS | ||
| 237-2717 | [1] | TUBE AS | ||
| (ABOVE PARTS ARE PART OF FUEL INJECTOR LINES GROUP 101-1246) | ||||
| 0T-0573 | [4] | BOLT (3/8-16X2.75-IN) | ||
| (ABOVE PART IS PART OF OIL FILTER GROUP 112-4921) | ||||
| 214-7568 | [1] | SEAL-O-RING | ||
| (ABOVE PART IS PART OF FUEL FILTER GROUP 112-4922) | ||||
| 8S-2331 | [2] | BOLT-12 POINT HEAD (5/8-11X2-IN) | ||
| 1D-4609 | [2] | BOLT (3/4-10X3-IN) | ||
| 101-1365 | [1] | PLATE-THRUST | ||
| 101-1368 | [2] | WASHER-THRUST (19.5X106X1.9-MM THK) | ||
| 107-2477 | [1] | GEAR AS-IDLER (92/44-TEETH) | ||
| 4P-5438 | [1] | BUSHING | ||
| 112-1552 | [2] | SHAFT-IDLER | ||
| 112-1554 | [2] | GEAR AS-IDLER (88-TEETH) | ||
| (EACH INCLUDES) | ||||
| 125-9751 | [1] | BUSHING | ||
| (ABOVE PARTS ARE PART OF REAR GEAR GROUP 112-5674) | ||||
| 1A-2029 | [10] | BOLT (3/8-16X1.125-IN) | ||
| 5M-2894 | [10] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 5P-0840 | [1] | SEAL-O-RING | ||
| 6V-3348 | [1] | SEAL-O-RING | ||
| 7N-4951 | [1] | COVER | ||
| 7N-4952 | [1] | COVER | ||
| 235-3546 | [1] | SEAL-O-RING | ||
| 259-4598 | [1] | SEAL-O-RING | ||
| (ABOVE PARTS ARE PART OF COVER GROUP (FRONT STRUCTURE) 112-8106) | ||||
| 165-3931 | [2] | BOLT (3/8-16X1.75-IN) | ||
| 0S-1594 | [2] | BOLT (3/8-16X1-IN) | ||
| 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 6V-4589 | [2] | SEAL-O-RING | ||
| 6V-5048 | [2] | SEAL-O-RING | ||
| 8C-3445 | [1] | CAP-DUST | ||
| 8C-3446 | [1] | VALVE-SAMPLING | ||
| 9S-4190 | [2] | PLUG-O-RING (7/8-14-THD) | ||
| 100-8075 | [1] | CLAMP AS | ||
| 111-3820 | [1] | RING-RETAINING | ||
| 264-0450 | [1] | CLAMP AS | ||
| (ABOVE PARTS ARE PART OF OIL LINES GROUP 115-7860) | ||||
| 0L-1143 | [2] | BOLT (3/8-16X2.5-IN) | ||
| 0S-1588 | [2] | BOLT (3/8-16X1.25-IN) | ||
| 0T-0055 | [2] | BOLT (3/8-16X4.25-IN) | ||
| 0T-0573 | [2] | BOLT (3/8-16X2.75-IN) | ||
| 1A-2029 | [7] | BOLT (3/8-16X1.125-IN) | ||
| 1B-9575 | [8] | BOLT (5/16-18X1.56-IN) | ||
| 1W-8129 | [2] | SUPPORT | ||
| 5M-2894 | [9] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 6I-1418 | [8] | SPACER (8.2X12.7X28.7-MM THK) | ||
| 7E-7950 | [1] | PLATE | ||
| 8N-9885 | [1] | GASKET-COVER | ||
| 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | ||
| 8T-9655 | [1] | MOUNT-ISOLATION | ||
| 9N-0869 | [8] | WASHER-HARD (8.8X25.5X2-MM THK) | ||
| 9S-8752 | [3] | NUT-FULL (3/8-16-THD) | ||
| 111-0349 | [1] | BRACKET-MODULE | ||
| 112-4387 | [2] | ELBOW | ||
| 155-0461 | [1] | PLATE AS | ||
| 176-7503 Y | [2] | CONTROL GP-ENGINE ELECTRONIC | ||
| (ABOVE PARTS ARE PART OF CONTROL GROUP 121-3321) | ||||
| 0S-1588 | [4] | BOLT (3/8-16X1.25-IN) | ||
| 2W-0752 | [1] | GASKET | ||
| 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 8N-9993 | [1] | COVER-CAMSHAFT | ||
| 117-0066 | [1] | BRACKET-MOUNTING | ||
| (ABOVE PARTS ARE PART OF COVER GROUP (CENTRAL STRUCTURE) 121-3552) | ||||
| 1A-9579 | [8] | BOLT (5/16-18X1.5-IN) | ||
| 4W-3027 | [2] | BREATHER AS (CRANKCASE) | ||
| 4W-3034 | [2] | CLAMP-HOSE | ||
| 5P-0597 | [2] | CLAMP-HOSE | ||
| 7N-7820 | [1] | BOOT | ||
| 9M-1974 | [8] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 033-6031 | [2] | SEAL-O-RING | ||
| 101-4199 | [4] | COVER AS | ||
| 180-3007 | [1] | CLAMP-HOSE | ||
| 217-6692 | [1] | HOSE-TEE | ||
| 272-0760 | [4] | SEAL-VALVE COVER | ||
| (ABOVE PARTS ARE PART OF BREATHER GROUP 124-5513) | ||||
| 0S-1618 | [30] | BOLT (5/16-18X1-IN) | ||
| 1B-7182 | [32] | BOLT (5/16-18X1.25-IN) | ||
| 2W-3146 | [16] | FLANGE | ||
| 4P-3897 | [4] | MANIFOLD (INTERMEDIATE) | ||
| 6V-5064 | [2] | SEAL-O-RING | ||
| 6V-9027 | [1] | SEAL-O-RING | ||
| 8N-7639 | [16] | ELBOW | ||
| 8T-6761 | [2] | PLUG-PIPE (1-11-1/2 NPT THD) | ||
| 8T-6765 | [2] | PLUG-PIPE (1/4-18-THD) | ||
| 9M-1974 | [30] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 9S-4181 | [2] | PLUG (1-5/16-12-THD) | ||
| 9S-4182 | [1] | PLUG (7/16-20-THD) | ||
| 111-8276 | [1] | MANIFOLD (REAR, LH) | ||
| 111-8277 | [1] | MANIFOLD (REAR, RH) | ||
| 111-9374 | [1] | HOUSING-REGULATOR | ||
| 122-8856 | [2] | GASKET | ||
| 133-8382 | [16] | BRACKET | ||
| 154-1616 | [1] | MANIFOLD (FRONT, LH) | ||
| 154-1617 | [1] | MANIFOLD (FRONT, RH) | ||
| 241-5928 | [16] | GASKET | ||
| 243-2288 | [6] | GASKET | ||
| (ABOVE PARTS ARE PART OF WATER LINES GROUP 130-2018) | ||||
| 7E-2580 | [16] | CLAMP-INJECTOR | ||
| 7F-8698 | [16] | BOLT (7/16-14X3.5-IN) | ||
| 392-0204 Y | [16] | INJECTOR GP-FUEL | ||
| (ABOVE PARTS ARE PART OF FUEL INJECTOR GROUP 133-5994) | ||||
| 6V-1943 | [12] | BOLT-HIGH TEMPERATURE (3/8-16X1.125-IN) | ||
| 6V-6753 | [8] | BOLT-HIGH TEMPERATURE (3/8-16X1.375-IN) | ||
| 178-2439 | [2] | SEAL AS | ||
| (EACH INCLUDES) | ||||
| 178-2437 | [1] | SEAL | ||
| 178-2438 | [1] | PLATE | ||
| 188-0471 | [4] | FLANGE-HALF | ||
| 453-7800 | [2] | GASKET-EXHAUST | ||
| 284-0753 | [8] | WASHER (11X25X2.5-MM THK) | ||
| 298-6389 | [8] | SPACER (10.3X19X15-MM THK) | ||
| 300-8579 | [8] | BOLT (3/8-16X2.5-IN) | ||
| 310-2233 | [8] | NUT-FLANGE (3/8-16-THD) | ||
| 329-3716 | [4] | FLANGE-HALF | ||
| 372-3134 Y | [2] | TURBOCHARGER GP | ||
| (ABOVE PARTS ARE PART OF TURBO GROUP 159-8828) | ||||
| 0S-0509 | [2] | BOLT (3/8-16X0.75-IN) | ||
| 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 5P-4255 | [2] | BOLT-LOCKING (3/8-16X1-IN) | ||
| 140-9594 | [1] | BRACKET AS | ||
| 140-9602 | [1] | BRACKET AS | ||
| (ABOVE PARTS ARE PART OF LIFTING GROUP 140-9593) | ||||
| 165-3929 | [1] | BOLT (3/8-16X1.5-IN) | ||
| 0S-1594 | [1] | BOLT (3/8-16X1-IN) | ||
| 397-9301 | [8] | WASHER-HARD (11.5X20X15-MM THK) | ||
| 2A-4639 | [8] | BOLT (3/8-16X1.625-IN) | ||
| 3B-1915 | [8] | BOLT (3/8-16X1.375-IN) | ||
| 4S-4869 | [1] | TEE | ||
| 5M-2894 | [20] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 5P-5777 | [1] | ADAPTER-O-RING | ||
| 6V-6609 | [7] | SEAL-O-RING | ||
| 6V-8398 | [3] | SEAL-O-RING | ||
| 6V-8782 | [1] | TEE | ||
| 6V-8801 | [2] | NUT (3/8-16-THD) | ||
| 6V-9002 | [1] | ELBOW | ||
| 6V-9830 | [1] | CAP | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 7N-3368 | [1] | GASKET | ||
| 7N-7878 | [4] | PLATE-COVER | ||
| 8M-0505 | [2] | ADAPTER | ||
| 9G-8140 | [1] | SPACER (10.5X25X15-MM THK) | ||
| 9X-8606 | [2] | CLIP | ||
| 107-0744 | [4] | BLOCK | ||
| 113-4647 | [1] | ADAPTER | ||
| 118-4728 | [2] | ELBOW | ||
| 146-3342 | [2] | COUPLING-PERMANENT | ||
| 180-8424 | [3] | SEAL-O-RING | ||
| 252-5658 | [2] | HOSE AS | ||
| 341-9211 | [8] | GASKET | ||
| 383-6859 | [1] | HOSE AS-WATER | ||
| (ABOVE PARTS ARE PART OF WATER LINES GROUP (TURBO) 161-4087) | ||||
| 0S-1594 | [4] | BOLT (3/8-16X1-IN) | ||
| 0T-0573 | [2] | BOLT (3/8-16X2.75-IN) | ||
| 1A-5964 | [4] | BOLT (3/8-16X4.5-IN) | ||
| 1W-7214 | [2] | ELBOW-DRAIN | ||
| 2P-7636 | [2] | CONNECTOR (3/4-16 STR-THD) | ||
| 4P-4460 | [2] | GASKET | ||
| 5P-9890 | [4] | SEAL-O-RING | ||
| 6I-0804 | [1] | ADAPTER-TURBOCHARGER OIL | ||
| 6I-0805 | [1] | ADAPTER-TURBOCHARGER OIL | ||
| 6V-4589 | [1] | SEAL-O-RING | ||
| 7N-7559 | [2] | GASKET | ||
| 091-0081 | [4] | SPACER (10.5X20X10-MM THK) | ||
| 8L-2786 | [2] | SEAL-O-RING | ||
| 9M-4584 | [1] | CONNECTOR | ||
| 9X-6458 | [1] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 113-4646 | [1] | TUBE AS | ||
| 113-4648 | [1] | ELBOW | ||
| 116-9863 | [1] | BRACKET | ||
| 130-2602 | [1] | TUBE AS | ||
| 166-5932 | [1] | TUBE AS | ||
| 179-1508 | [1] | ELBOW | ||
| 185-5855 | [1] | TUBE | ||
| (ABOVE PARTS ARE PART OF TURBO OIL LINES GROUP 162-5719) | ||||
| 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | ||
| 0L-2070 | [26] | BOLT (3/8-16X2.25-IN) | ||
| 1W-1251 | [4] | GASKET | ||
| 3V-3308 | [2] | WASHER-HARD (10.2X20.5X2.5-MM THK) | ||
| 6V-3917 | [4] | SEAL-O-RING | ||
| 6V-5504 | [16] | SEAL-O-RING | ||
| 7N-5079 | [16] | ELBOW | ||
| 7W-1944 | [2] | RETAINER | ||
| 0L-1329 | [2] | BOLT (1/2-13X3-IN) | ||
| 136-9629 | [1] | PLATE | ||
| 140-6458 | [1] | BRACKET | ||
| 140-6463 | [2] | BRACKET | ||
| 149-0233 | [1] | PIPE | ||
| 162-8864 | [1] | ELBOW-TURBOCHARGER EXHAUST | ||
| 164-0866 | [1] | PIPE | ||
| (ABOVE PARTS ARE PART OF AIR LINES GROUP 164-0867) | ||||
| 3B-1915 | [4] | BOLT (3/8-16X1.375-IN) | ||
| 3E-6916 | [112] | NUT-FULL (3/8-16-THD) | ||
| 4P-7680 | [16] | SPACER (10.5X22.5X15-MM THK) | ||
| 7L-6443 | [112] | BOLT-HIGH TEMPERATURE (3/8-16X2.25-IN) | ||
| 9L-7373 | [64] | BOLT-HIGH TEMPERATURE (3/8-16X2-IN) | ||
| 100-3145 | [1] | MANIFOLD-EXHAUST (FRONT, RH) | ||
| 100-3146 | [6] | MANIFOLD-EXHAUST (INTERMEDIATE, RH) | ||
| 100-3147 | [1] | MANIFOLD-EXHAUST (FRONT, LH) | ||
| 100-3148 | [6] | MANIFOLD-EXHAUST (INTERMEDIATE, LH) | ||
| 110-8314 | [224] | WASHER (10.3X18.3X2.66-MM THK) | ||
| 128-9508 | [1] | MANIFOLD-EXHAUST (REAR, RH) | ||
| 162-8865 | [1] | MANIFOLD-EXHAUST (REAR, LH) | ||
| 207-1364 | [14] | BELLOWS AS | ||
| 229-5332 | [16] | SEAL | ||
| 229-5333 | [28] | SEAL | ||
| 254-3261 | [1] | BRACKET AS (RH) | ||
| 254-3262 | [1] | BRACKET AS (LH) | ||
| (ABOVE PARTS ARE PART OF EXHAUST MANIFOLD GROUP 167-1759) | ||||
| 222-9921 | [1] | HOUSING-FLYWHEEL | ||
| (ABOVE PART IS PART OF FLYWHEEL HOUSING GROUP 101-1269) | ||||
| 1B-4218 | [6] | WASHER (0.39X0.625X0.064-IN THK) | ||
| 2A-5220 | [6] | PLUG | ||
| (ABOVE PARTS ARE PART OF FRONT HOUSING GROUP 4P-5426) | ||||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP55400035
389-1485: KIT-ENGINE CONVERSION
389-1485 KIT-ENGINE CONVERSION
3516 MUI TO EUI EMISSIONS RETROFIT EQUIVALENT LEVEL, PROVIDES PARTS TO UPGRADE THE MUI 2W-8864 ENGINE ARRANGEMENT TO EUI 129-5494 ENGINE ARRANGEMENT, TO BE USED IN CONJUNCTION WITH ENGINE OVERHAUL
PART OF 376-3108 CONVERSION AR-ENGINE
FOR USE WITH REHS4159, 3516, 1600 RPM, 29Z818-1119
FIELD INSTALLATION
3516 MUI TO EUI EMISSIONS RETROFIT EQUIVALENT LEVEL, PROVIDES PARTS TO UPGRADE THE MUI 2W-8864 ENGINE ARRANGEMENT TO EUI 129-5494 ENGINE ARRANGEMENT, TO BE USED IN CONJUNCTION WITH ENGINE OVERHAUL
PART OF 376-3108 CONVERSION AR-ENGINE
FOR USE WITH REHS4159, 3516, 1600 RPM, 29Z818-1119
FIELD INSTALLATION
For full view, you need register
Parts for your 3516 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 314-5005 | [16] | PISTON AS | ||
| (EACH INCLUDES) | ||||
| 10R-4378 | [1] | PISTON & ROD GP | ||
| 0R-9200 | [1] | ROD AS-CONNECTING | ||
| 7N-2043 | [1] | DOWEL | ||
| 7N-2405 | [4] | BOLT-CONNECTING ROD | ||
| 118-1655 | [1] | BUSHING (CONNECTING ROD) | ||
| 144-5695 | [1] | RING-PISTON (INTERMEDIATE) | ||
| 211-7826 | [1] | LINER-CYLINDER BLOCK | ||
| 214-6066 | [1] | RING-PISTON (TOP) | ||
| 223-6361 | [1] | RING-PISTON (OIL) | ||
| 253-1238 | [2] | RETAINER-PIN | ||
| 353-5995 | [1] | KIT-SEAL (CYLINDER) | ||
| 7N-2046 | [3] | SEAL-O-RING | ||
| 8N-4707 | [1] | BAND-FILLER | ||
| 352-6061 | [1] | SEAL-LINER | ||
| 123-4268 | [16] | RING-PISTON | ||
| 138-8507 | [16] | PIN-PISTON | ||
| 144-5695 | [16] | RING-PISTON (INTERMEDIATE) | ||
| 193-3282 | [16] | RETAINER AS (FOR USE WITH 1-PC PISTON ONLY) | ||
| (EACH INCLUDES) | ||||
| 6V-3537 | [1] | DOWEL | ||
| 204-5447 | [16] | JET AS-PISTON COOLING (FOR USE WITH 1-PC PISTON ONLY) | ||
| 229-1631 | [16] | RING-PISTON | ||
| (ABOVE PARTS ARE PART OF PISTON & ROD GROUP 6I-2861) | ||||
| 0S-1615 | [16] | BOLT (1/4-20X0.75-IN) | ||
| 1B-2714 | [16] | BOLT (1/4-20X2.5-IN) | ||
| 2A-0762 | BOLT (1/4-20X0.625-IN) | |||
| 4P-2478 | [16] | PLATE | ||
| 5P-0537 | [48] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 6J-2245 | [16] | SEAL-O-RING | ||
| 7E-6508 | [16] | CAP AS | ||
| 8M-2771 | [16] | CLIP | ||
| 9X-0352 | [16] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 121-2024 | [16] | BASE AS | ||
| 8N-4387 | [2] | DOWEL-HOLLOW | ||
| 121-9840 | [16] | SPACER (2-IN THK) | ||
| 132-6469 Y | [16] | HARNESS AS-WIRING (VALVE MECHANISM) | ||
| 265-7537 | [16] | BRIDGE (INLET) | ||
| 265-7538 | [16] | BRIDGE (EXHAUST) | ||
| 346-7515 | [48] | LIFTER AS | ||
| (EACH INCLUDES) | ||||
| 7N-3421 | [1] | INSERT-LIFTER | ||
| 358-0768 | [48] | SCREW-ADJUSTING (1/2-20X2.42-IN) | ||
| (ABOVE PARTS ARE PART OF MECHANISM GROUP 7E-5314) | ||||
| 7E-5539 | [1] | CAMSHAFT AS | ||
| 5B-5821 | [1] | DOWEL | ||
| 7E-5540 | [1] | CAMSHAFT-REAR | ||
| 133-4213 | [1] | CAMSHAFT AS | ||
| 5B-5821 | [1] | DOWEL | ||
| (ABOVE PARTS ARE PART OF CAMSHAFT GROUP 7E-5538) | ||||
| 335-6219 Y | [1] | CYLINDER HEAD GP | ||
| (ABOVE PART IS PART OF CYLINDER HEAD GROUP 7E-8758) | ||||
| 101-4197 | [12] | COVER | ||
| 272-0760 | [12] | SEAL-VALVE COVER | ||
| (ABOVE PARTS ARE PART OF COVER GROUP (VALVE MECHANISM) 101-0831) | ||||
| 0S-0509 | [1] | BOLT (3/8-16X0.75-IN) | ||
| 0T-0055 | [1] | BOLT (3/8-16X4.25-IN) | ||
| 0T-0065 | [1] | BOLT (3/8-16X3.5-IN) | ||
| 1F-4111 | [1] | BOLT (5/16-18X3.5-IN) | ||
| 4P-0692 | [2] | CLAMP AS | ||
| (EACH INCLUDES) | ||||
| 108-1434 | [1] | GROMMET | ||
| 5P-4295 | [1] | CLIP | ||
| 5P-4318 | [1] | ELBOW | ||
| 6B-6205 | [1] | SPACER (0.438X0.875X1.281-IN THK) | ||
| 6V-4589 | [1] | SEAL-O-RING | ||
| 7K-1181 | [1] | STRAP-CABLE | ||
| 9X-6458 | [1] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 030-7972 | [1] | ELBOW | ||
| 030-7982 | [1] | UNION-FLARED | ||
| 111-3388 | [1] | TUBE AS | ||
| 111-3389 | [1] | TUBE AS | ||
| 124-1961 | [2] | COUPLING-PERMANENT | ||
| 174-7088 | [1] | HOSE AS | ||
| 237-2712 | [1] | TUBE AS | ||
| 237-2717 | [1] | TUBE AS | ||
| (ABOVE PARTS ARE PART OF FUEL INJECTOR LINES GROUP 101-1246) | ||||
| 0T-0573 | [4] | BOLT (3/8-16X2.75-IN) | ||
| (ABOVE PART IS PART OF OIL FILTER GROUP 112-4921) | ||||
| 214-7568 | [1] | SEAL-O-RING | ||
| (ABOVE PART IS PART OF FUEL FILTER GROUP 112-4922) | ||||
| 8S-2331 | [2] | BOLT-12 POINT HEAD (5/8-11X2-IN) | ||
| 1D-4609 | [2] | BOLT (3/4-10X3-IN) | ||
| 101-1365 | [1] | PLATE-THRUST | ||
| 101-1368 | [2] | WASHER-THRUST (19.5X106X1.9-MM THK) | ||
| 107-2477 | [1] | GEAR AS-IDLER (92/44-TEETH) | ||
| 4P-5438 | [1] | BUSHING | ||
| 112-1552 | [2] | SHAFT-IDLER | ||
| 112-1554 | [2] | GEAR AS-IDLER (88-TEETH) | ||
| (EACH INCLUDES) | ||||
| 125-9751 | [1] | BUSHING | ||
| (ABOVE PARTS ARE PART OF REAR GEAR GROUP 112-5674) | ||||
| 1A-2029 | [10] | BOLT (3/8-16X1.125-IN) | ||
| 5M-2894 | [10] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 5P-0840 | [1] | SEAL-O-RING | ||
| 6V-3348 | [1] | SEAL-O-RING | ||
| 7N-4951 | [1] | COVER | ||
| 7N-4952 | [1] | COVER | ||
| 235-3546 | [1] | SEAL-O-RING | ||
| 259-4598 | [1] | SEAL-O-RING | ||
| (ABOVE PARTS ARE PART OF COVER GROUP (FRONT STRUCTURE) 112-8106) | ||||
| 165-3931 | [2] | BOLT (3/8-16X1.75-IN) | ||
| 0S-1594 | [2] | BOLT (3/8-16X1-IN) | ||
| 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 6V-4589 | [2] | SEAL-O-RING | ||
| 6V-5048 | [2] | SEAL-O-RING | ||
| 8C-3445 | [1] | CAP-DUST | ||
| 8C-3446 | [1] | VALVE-SAMPLING | ||
| 9S-4190 | [2] | PLUG-O-RING (7/8-14-THD) | ||
| 100-8075 | [1] | CLAMP AS | ||
| 111-3820 | [1] | RING-RETAINING | ||
| 264-0450 | [1] | CLAMP AS | ||
| (ABOVE PARTS ARE PART OF OIL LINES GROUP 115-7860) | ||||
| 0L-1143 | [2] | BOLT (3/8-16X2.5-IN) | ||
| 0S-1588 | [2] | BOLT (3/8-16X1.25-IN) | ||
| 0T-0055 | [2] | BOLT (3/8-16X4.25-IN) | ||
| 0T-0573 | [2] | BOLT (3/8-16X2.75-IN) | ||
| 1A-2029 | [7] | BOLT (3/8-16X1.125-IN) | ||
| 1B-9575 | [8] | BOLT (5/16-18X1.56-IN) | ||
| 1W-8129 | [2] | SUPPORT | ||
| 5M-2894 | [9] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 6I-1418 | [8] | SPACER (8.2X12.7X28.7-MM THK) | ||
| 7E-7950 | [1] | PLATE | ||
| 8N-9885 | [1] | GASKET-COVER | ||
| 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | ||
| 8T-9655 | [16] | MOUNT-ISOLATION | ||
| 9N-0869 | [8] | WASHER-HARD (8.8X25.5X2-MM THK) | ||
| 9S-8752 | [3] | NUT-FULL (3/8-16-THD) | ||
| 111-0349 | [1] | BRACKET-MODULE | ||
| 112-4387 | [2] | ELBOW | ||
| 155-0461 | [1] | PLATE AS | ||
| 176-7503 Y | [2] | CONTROL GP-ENGINE ELECTRONIC | ||
| (ABOVE PARTS ARE PART OF CONTROL GROUP 121-3321) | ||||
| 0S-1588 | [4] | BOLT (3/8-16X1.25-IN) | ||
| 2W-0752 | [1] | GASKET | ||
| 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 8N-9993 | [1] | COVER-CAMSHAFT | ||
| 117-0066 | [1] | BRACKET-MOUNTING | ||
| (ABOVE PARTS ARE PART OF COVER GROUP (CENTRAL STRUCTURE) 121-3552) | ||||
| 1A-9579 | [8] | BOLT (5/16-18X1.5-IN) | ||
| 4W-3027 | [2] | BREATHER AS (CRANKCASE) | ||
| 4W-3034 | [2] | CLAMP-HOSE | ||
| 5P-0597 | [2] | CLAMP-HOSE | ||
| 7N-7820 | [1] | BOOT | ||
| 9M-1974 | [8] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 033-6031 | [2] | SEAL-O-RING | ||
| 101-4199 | [4] | COVER AS | ||
| 180-3007 | [1] | CLAMP-HOSE | ||
| 217-6692 | [1] | HOSE-TEE | ||
| 272-0760 | [4] | SEAL-VALVE COVER | ||
| (ABOVE PARTS ARE PART OF BREATHER GROUP 124-5513) | ||||
| 0S-1618 | [30] | BOLT (5/16-18X1-IN) | ||
| 1B-7182 | [32] | BOLT (5/16-18X1.25-IN) | ||
| 2W-3146 | [16] | FLANGE | ||
| 4P-3897 | [4] | MANIFOLD (INTERMEDIATE) | ||
| 6V-5064 | [2] | SEAL-O-RING | ||
| 6V-9027 | [1] | SEAL-O-RING | ||
| 8N-7639 | [16] | ELBOW | ||
| 8T-6761 | [2] | PLUG-PIPE (1-11-1/2 NPT THD) | ||
| 8T-6765 | [2] | PLUG-PIPE (1/4-18-THD) | ||
| 9M-1974 | [30] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 9S-4181 | [2] | PLUG (1-5/16-12-THD) | ||
| 9S-4182 | [1] | PLUG (7/16-20-THD) | ||
| 111-8276 | [1] | MANIFOLD (REAR, LH) | ||
| 111-8277 | [1] | MANIFOLD (REAR, RH) | ||
| 111-9374 | [1] | HOUSING-REGULATOR | ||
| 122-8856 | [2] | GASKET | ||
| 133-8382 | [16] | BRACKET | ||
| 154-1616 | [1] | MANIFOLD (FRONT, LH) | ||
| 154-1617 | [1] | MANIFOLD (FRONT, RH) | ||
| 241-5928 | [16] | GASKET | ||
| 243-2288 | [6] | GASKET | ||
| (ABOVE PARTS ARE PART OF WATER LINES GROUP 130-2018) | ||||
| 7E-2580 | [16] | CLAMP-INJECTOR | ||
| 7F-8698 | [16] | BOLT (7/16-14X3.5-IN) | ||
| 392-0204 Y | [16] | INJECTOR GP-FUEL | ||
| (ABOVE PARTS ARE PART OF FUEL INJECTOR GROUP 133-5994) | ||||
| 6V-1943 | [12] | BOLT-HIGH TEMPERATURE (3/8-16X1.125-IN) | ||
| 6V-6753 | [8] | BOLT-HIGH TEMPERATURE (3/8-16X1.375-IN) | ||
| 178-2439 | [2] | SEAL AS | ||
| (EACH INCLUDES) | ||||
| 178-2437 | [1] | SEAL | ||
| 178-2438 | [1] | PLATE | ||
| 188-0471 | [4] | FLANGE-HALF | ||
| 453-7800 | [4] | GASKET-EXHAUST | ||
| 207-1390 | [2] | BELLOWS AS | ||
| 284-0753 | [8] | WASHER (11X25X2.5-MM THK) | ||
| 298-6389 | [8] | SPACER (10.3X19X15-MM THK) | ||
| 394-0379 Y | [2] | TURBOCHARGER GP | ||
| 300-8579 | [8] | BOLT (3/8-16X2.5-IN) | ||
| 310-2233 | [8] | NUT-FLANGE (3/8-16-THD) | ||
| 329-3716 | [4] | FLANGE-HALF | ||
| (ABOVE PARTS ARE PART OF TURBO GROUP 159-8828) | ||||
| 0S-0509 | [2] | BOLT (3/8-16X0.75-IN) | ||
| 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 5P-4255 | [2] | BOLT-LOCKING (3/8-16X1-IN) | ||
| 140-9594 | [1] | BRACKET AS | ||
| 140-9602 | [1] | BRACKET AS | ||
| (ABOVE PARTS ARE PART OF LIFING GROUP 140-9593) | ||||
| 165-3929 | [1] | BOLT (3/8-16X1.5-IN) | ||
| 0S-1594 | [1] | BOLT (3/8-16X1-IN) | ||
| 397-9301 | [8] | WASHER-HARD (11.5X20X15-MM THK) | ||
| 2A-4639 | [8] | BOLT (3/8-16X1.625-IN) | ||
| 3B-1915 | [8] | BOLT (3/8-16X1.375-IN) | ||
| 4S-4869 | [1] | TEE | ||
| 5M-2894 | [20] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 5P-5777 | [1] | ADAPTER-O-RING | ||
| 6V-6609 | [7] | SEAL-O-RING | ||
| 6V-8398 | [3] | SEAL-O-RING | ||
| 6V-8782 | [1] | TEE | ||
| 6V-8801 | [2] | NUT (3/8-16-THD) | ||
| 6V-9002 | [1] | ELBOW | ||
| 6V-9830 | [1] | CAP | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 7N-3368 | [1] | GASKET | ||
| 7N-7878 | [4] | PLATE-COVER | ||
| 8M-0505 | [2] | ADAPTER | ||
| 9G-8140 | [1] | SPACER (10.5X25X15-MM THK) | ||
| 9X-8606 | [2] | CLIP | ||
| 107-0744 | [4] | BLOCK | ||
| 113-4647 | [1] | ADAPTER | ||
| 118-4728 | [2] | ELBOW | ||
| 146-3342 | [2] | COUPLING-PERMANENT | ||
| 180-8424 | [3] | SEAL-O-RING | ||
| 252-5658 | [2] | HOSE AS | ||
| 341-9211 | [8] | GASKET | ||
| 383-6859 | [1] | HOSE AS-WATER | ||
| (ABOVE PARTS ARE PART OF WATER LINES GROUP (TURBO) 161-4087) | ||||
| 0S-1594 | [4] | BOLT (3/8-16X1-IN) | ||
| 0T-0573 | [2] | BOLT (3/8-16X2.75-IN) | ||
| 1A-5964 | [4] | BOLT (3/8-16X4.5-IN) | ||
| 1W-7214 | [2] | ELBOW-DRAIN | ||
| 2P-7636 | [2] | CONNECTOR (3/4-16 STR-THD) | ||
| 4P-4460 | [2] | GASKET | ||
| 5P-9890 | [4] | SEAL-O-RING | ||
| 6I-0804 | [1] | ADAPTER-TURBOCHARGER OIL | ||
| 6I-0805 | [1] | ADAPTER-TURBOCHARGER OIL | ||
| 6V-4589 | [1] | SEAL-O-RING | ||
| 7N-7559 | [2] | GASKET | ||
| 091-0081 | [4] | SPACER (10.5X20X10-MM THK) | ||
| 8L-2786 | [2] | SEAL-O-RING | ||
| 9M-4584 | [1] | CONNECTOR | ||
| 9X-6458 | [1] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 113-4646 | [1] | TUBE AS | ||
| 113-4648 | [1] | ELBOW | ||
| 116-9863 | [1] | BRACKET | ||
| 130-2602 | [1] | TUBE AS | ||
| 166-5932 | [1] | TUBE AS | ||
| 179-1508 | [1] | ELBOW | ||
| 185-5855 | [1] | TUBE | ||
| (ABOVE PARTS ARE PART OF TURBO OIL LINES GROUP 162-5719) | ||||
| 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | ||
| 0L-2070 | [26] | BOLT (3/8-16X2.25-IN) | ||
| 1W-1251 | [4] | GASKET | ||
| 3V-3308 | [2] | WASHER-HARD (10.2X20.5X2.5-MM THK) | ||
| 6V-3917 | [4] | SEAL-O-RING | ||
| 6V-5504 | [16] | SEAL-O-RING | ||
| 7N-5079 | [16] | ELBOW | ||
| 7W-1944 | [2] | RETAINER | ||
| 0L-1329 | [2] | BOLT (1/2-13X3-IN) | ||
| 136-9629 | [1] | PLATE | ||
| 140-6458 | [1] | BRACKET | ||
| 140-6463 | [2] | BRACKET | ||
| 149-0233 | [1] | PIPE | ||
| 162-8864 | [1] | ELBOW-TURBOCHARGER EXHAUST | ||
| 164-0866 | [1] | PIPE | ||
| (ABOVE PARTS ARE PART OF AIR LINES GROUP 164-0867) | ||||
| 3B-1915 | [4] | BOLT (3/8-16X1.375-IN) | ||
| 3E-6916 | [112] | NUT-FULL (3/8-16-THD) | ||
| 4P-7680 | [16] | SPACER (10.5X22.5X15-MM THK) | ||
| 7L-6443 | [112] | BOLT-HIGH TEMPERATURE (3/8-16X2.25-IN) | ||
| 9L-7373 | [64] | BOLT-HIGH TEMPERATURE (3/8-16X2-IN) | ||
| 100-3145 | [1] | MANIFOLD-EXHAUST (FRONT, RH) | ||
| 100-3146 | [6] | MANIFOLD-EXHAUST (INTERMEDIATE, RH) | ||
| 100-3148 | [6] | MANIFOLD-EXHAUST (INTERMEDIATE, LH) | ||
| 100-3147 | [1] | MANIFOLD-EXHAUST (FRONT, LH) | ||
| 110-8314 | [224] | WASHER (10.3X18.3X2.66-MM THK) | ||
| 128-9508 | [1] | MANIFOLD-EXHAUST (REAR, RH) | ||
| 162-8865 | [1] | MANIFOLD-EXHAUST (REAR, LH) | ||
| 207-1364 | [14] | BELLOWS AS | ||
| 229-5332 | [16] | SEAL | ||
| 229-5333 | [28] | SEAL | ||
| 254-3261 | [1] | BRACKET AS (RH) | ||
| 254-3262 | [1] | BRACKET AS (LH) | ||
| (ABOVE PARTS ARE PART OF EXHAUST MANIFOLD GROUP 167-1759) | ||||
| 222-9921 | [1] | HOUSING-FLYWHEEL | ||
| (ABOVE PART IS PART OF FLYWHEEL HOUSING GROUP 101-1269) | ||||
| 1B-4218 | [6] | WASHER (0.39X0.625X0.064-IN THK) | ||
| 2A-5220 | [6] | PLUG | ||
| (ABOVE PARTS ARE PART OF FRONT HOUSING GROUP 4P-5426) | ||||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP55400036
389-1486: KIT-ENGINE CONVERSION
389-1486 KIT-ENGINE CONVERSION
3516 MUI TO EUI EMISSIONS EQUIVALENT LEVEL, PROVIDES PARTS TO UPGRADE THE MUI 2W-8864 ENGINE ARRANGEMENT TO EUI 129-5494 ENGINE ARRANGEMENT, TO BE USED IN CONJUNCTION WITH ENGINE OVERHAUL
PART OF 376-3109 CONVERSION AR-ENGINE
FOR USE WITH REHS4159, 3516, 1800 RPM, 29Z818-1119
FIELD INSTALLATION
3516 MUI TO EUI EMISSIONS EQUIVALENT LEVEL, PROVIDES PARTS TO UPGRADE THE MUI 2W-8864 ENGINE ARRANGEMENT TO EUI 129-5494 ENGINE ARRANGEMENT, TO BE USED IN CONJUNCTION WITH ENGINE OVERHAUL
PART OF 376-3109 CONVERSION AR-ENGINE
FOR USE WITH REHS4159, 3516, 1800 RPM, 29Z818-1119
FIELD INSTALLATION
For full view, you need register
Parts for your 3516 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 314-5005 | [16] | PISTON AS | ||
| (EACH INCLUDES) | ||||
| 10R-4378 | [1] | PISTON & ROD GP | ||
| 0R-9200 | [1] | ROD AS-CONNECTING | ||
| 7N-2043 | [1] | DOWEL | ||
| 7N-2405 | [4] | BOLT-CONNECTING ROD | ||
| 118-1655 | [1] | BUSHING (CONNECTING ROD) | ||
| 144-5695 | [1] | RING-PISTON (INTERMEDIATE) | ||
| 211-7826 | [1] | LINER-CYLINDER BLOCK | ||
| 214-6066 | [1] | RING-PISTON (TOP) | ||
| 223-6361 | [1] | RING-PISTON (OIL) | ||
| 253-1238 | [2] | RETAINER-PIN | ||
| 353-5995 | [1] | KIT-SEAL (CYLINDER) | ||
| 7N-2046 | [3] | SEAL-O-RING | ||
| 8N-4707 | [1] | BAND-FILLER | ||
| 352-6061 | [1] | SEAL-LINER | ||
| 123-4268 | [16] | RING-PISTON | ||
| 138-8507 | [16] | PIN-PISTON | ||
| 144-5695 | [16] | RING-PISTON (INTERMEDIATE) | ||
| 193-3282 | [16] | RETAINER AS (FOR USE WITH 1-PC PISTON ONLY) | ||
| (EACH INCLUDES) | ||||
| 6V-3537 | [1] | DOWEL | ||
| 204-5447 | [16] | JET AS-PISTON COOLING (FOR USE WITH 1-PC PISTON ONLY) | ||
| 229-1631 | [16] | RING-PISTON | ||
| (ABOVE PARTS ARE PART OF PISTON & ROD GROUP 6I-2861) | ||||
| 0S-1615 | [16] | BOLT (1/4-20X0.75-IN) | ||
| 1B-2714 | [16] | BOLT (1/4-20X2.5-IN) | ||
| 2A-0762 | [16] | BOLT (1/4-20X0.625-IN) | ||
| 4P-2478 | [16] | PLATE | ||
| 5P-0537 | [48] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 6J-2245 | [16] | SEAL-O-RING | ||
| 7E-6508 | [16] | CAP AS | ||
| 8M-2771 | [16] | CLIP | ||
| 9X-0352 | [16] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 121-2024 | [16] | BASE AS | ||
| (EACH INCLUDES) | ||||
| 8N-4387 | [2] | DOWEL-HOLLOW | ||
| 121-9840 | [16] | SPACER (2-IN THK) | ||
| 132-6469 Y | [16] | HARNESS AS-WIRING (VALVE MECHANISM) | ||
| 265-7537 | [16] | BRIDGE (INLET) | ||
| 265-7538 | [16] | BRIDGE (EXHAUST) | ||
| 346-7515 | [48] | LIFTER AS | ||
| (EACH INCLUDES) | ||||
| 7N-3421 | [1] | INSERT-LIFTER | ||
| 358-0768 | [48] | SCREW-ADJUSTING (1/2-20X2.42-IN) | ||
| (ABOVE PARTS ARE PART OF MECHANISM GROUP 7E-5314) | ||||
| 7E-5539 | [1] | CAMSHAFT AS | ||
| 5B-5821 | [1] | DOWEL | ||
| 7E-5540 | [1] | CAMSHAFT-REAR | ||
| 133-4213 | [1] | CAMSHAFT AS | ||
| 5B-5821 | [1] | DOWEL | ||
| (ABOVE PARTS ARE PART OF CAMSHAFT GROUP 7E-5538) | ||||
| 335-6219 Y | [1] | CYLINDER HEAD GP | ||
| (ABOVE PART IS PART OF CYLINDER HEAD GROUP 7E-8758) | ||||
| 101-4197 | [13] | COVER | ||
| 272-0760 | [12] | SEAL-VALVE COVER | ||
| (ABOVE PARTS ARE PART OF COVER GROUP (VALVE MECHANISM) 101-0831) | ||||
| 0S-0509 | [1] | BOLT (3/8-16X0.75-IN) | ||
| 0T-0055 | [1] | BOLT (3/8-16X4.25-IN) | ||
| 0T-0065 | [1] | BOLT (3/8-16X3.5-IN) | ||
| 1F-4111 | [1] | BOLT (5/16-18X3.5-IN) | ||
| 4P-0692 | [2] | CLAMP AS | ||
| (EACH INCLUDES) | ||||
| 108-1434 | [1] | GROMMET | ||
| 5P-4295 | [1] | CLIP | ||
| 5P-4318 | [1] | ELBOW | ||
| 6B-6205 | [1] | SPACER (0.438X0.875X1.281-IN THK) | ||
| 6V-4589 | [1] | SEAL-O-RING | ||
| 9X-6458 | [1] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 7K-1181 | [1] | STRAP-CABLE | ||
| 030-7972 | [1] | ELBOW | ||
| 030-7982 | [1] | UNION-FLARED | ||
| 111-3388 | [1] | TUBE AS | ||
| 111-3389 | [1] | TUBE AS | ||
| 124-1961 | [2] | COUPLING-PERMANENT | ||
| 174-7088 | [1] | HOSE AS | ||
| 237-2712 | [1] | TUBE AS | ||
| 237-2717 | [1] | TUBE AS | ||
| (ABOVE PARTS ARE PART OF FUEL INJECTOR LINES GROUP 101-1246) | ||||
| 0T-0573 | [4] | BOLT (3/8-16X2.75-IN) | ||
| (ABOVE PART IS PART OF OIL FILTER GROUP 112-4921) | ||||
| 214-7568 | [1] | SEAL-O-RING | ||
| (ABOVE PART IS PART OF FUEL FILTER GROUP 112-4922) | ||||
| 8S-2331 | [2] | BOLT-12 POINT HEAD (5/8-11X2-IN) | ||
| 1D-4609 | [2] | BOLT (3/4-10X3-IN) | ||
| 101-1365 | [1] | PLATE-THRUST | ||
| 101-1368 | [2] | WASHER-THRUST (19.5X106X1.9-MM THK) | ||
| 107-2477 | [1] | GEAR AS-IDLER (92/44-TEETH) | ||
| 4P-5438 | [1] | BUSHING | ||
| 112-1552 | [2] | SHAFT-IDLER | ||
| 112-1554 | [2] | GEAR AS-IDLER (88-TEETH) | ||
| (EACH INCLUDES) | ||||
| 125-9751 | [1] | BUSHING | ||
| (ABOVE PARTS ARE PART OF REAR GEAR GROUP 112-5674) | ||||
| 1A-2029 | [10] | BOLT (3/8-16X1.125-IN) | ||
| 5M-2894 | [10] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 5P-0840 | [1] | SEAL-O-RING | ||
| 6V-3348 | [1] | SEAL-O-RING | ||
| 7N-4951 | [1] | COVER | ||
| 235-3546 | [1] | SEAL-O-RING | ||
| 259-4598 | [1] | SEAL-O-RING | ||
| (ABOVE PARTS ARE PART OF COVER GROUP (FRONT STRUCTURE) 112-8106) | ||||
| 165-3931 | [2] | BOLT (3/8-16X1.75-IN) | ||
| 0S-1594 | [2] | BOLT (3/8-16X1-IN) | ||
| 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 6V-4589 | [2] | SEAL-O-RING | ||
| 8C-3445 | [1] | CAP-DUST | ||
| 8C-3446 | [1] | VALVE-SAMPLING | ||
| 9S-4190 | [2] | PLUG-O-RING (7/8-14-THD) | ||
| 100-8075 | [1] | CLAMP AS | ||
| 111-3820 | [1] | RING-RETAINING | ||
| 264-0450 | [1] | CLAMP AS | ||
| (ABOVE PARTS ARE PART OF OIL LINES GROUP 115-7860) | ||||
| 0L-1143 | [2] | BOLT (3/8-16X2.5-IN) | ||
| 0S-1588 | [2] | BOLT (3/8-16X1.25-IN) | ||
| 0T-0055 | [2] | BOLT (3/8-16X4.25-IN) | ||
| 0T-0573 | [2] | BOLT (3/8-16X2.75-IN) | ||
| 1A-2029 | [7] | BOLT (3/8-16X1.125-IN) | ||
| 1B-9575 | [8] | BOLT (5/16-18X1.56-IN) | ||
| 1W-8129 | [2] | SUPPORT | ||
| 5M-2894 | [9] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 6I-1418 | [8] | SPACER (8.2X12.7X28.7-MM THK) | ||
| 7E-7950 | [1] | PLATE | ||
| 8N-9885 | [1] | GASKET-COVER | ||
| 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | ||
| 8T-9655 | [16] | MOUNT-ISOLATION | ||
| 9N-0869 | [8] | WASHER-HARD (8.8X25.5X2-MM THK) | ||
| 9S-8752 | [3] | NUT-FULL (3/8-16-THD) | ||
| 111-0349 | [1] | BRACKET-MODULE | ||
| 112-4387 | [2] | ELBOW | ||
| 155-0461 | [1] | PLATE AS | ||
| 176-7503 Y | [2] | CONTROL GP-ENGINE ELECTRONIC | ||
| (ABOVE PARTS ARE PART OF CONTROL GROUP 121-3321) | ||||
| 0S-1588 | [4] | BOLT (3/8-16X1.25-IN) | ||
| 2W-0752 | [1] | GASKET | ||
| 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 8N-9993 | [1] | COVER-CAMSHAFT | ||
| 117-0066 | [1] | BRACKET-MOUNTING | ||
| (ABOVE PARTS ARE PART OF COVER GROUP (CENTRAL STRUCTURE) 121-3552) | ||||
| 1A-9579 | [8] | BOLT (5/16-18X1.5-IN) | ||
| 4W-3027 | [2] | BREATHER AS (CRANKCASE) | ||
| 4W-3034 | [2] | CLAMP-HOSE | ||
| 5P-0597 | [2] | CLAMP-HOSE | ||
| 7N-7820 | [1] | BOOT | ||
| 9M-1974 | [8] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 033-6031 | [2] | SEAL-O-RING | ||
| 101-4199 | [4] | COVER AS | ||
| 180-3007 | [1] | CLAMP-HOSE | ||
| 217-6692 | [1] | HOSE-TEE | ||
| 272-0760 | [4] | SEAL-VALVE COVER | ||
| (ABOVE PARTS ARE PART OF BREATHER GROUP 124-5513) | ||||
| 0S-1618 | [30] | BOLT (5/16-18X1-IN) | ||
| 1B-7182 | [32] | BOLT (5/16-18X1.25-IN) | ||
| 2W-3146 | [16] | FLANGE | ||
| 4P-3897 | [4] | MANIFOLD (INTERMEDIATE) | ||
| 6V-5064 | [2] | SEAL-O-RING | ||
| 6V-9027 | [1] | SEAL-O-RING | ||
| 8N-7639 | [16] | ELBOW | ||
| 8T-6761 | [2] | PLUG-PIPE (1-11-1/2 NPT THD) | ||
| 8T-6765 | [2] | PLUG-PIPE (1/4-18-THD) | ||
| 9M-1974 | [30] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 9S-4181 | [2] | PLUG (1-5/16-12-THD) | ||
| 9S-4182 | [1] | PLUG (7/16-20-THD) | ||
| 111-8276 | [1] | MANIFOLD (REAR, LH) | ||
| 111-8277 | [1] | MANIFOLD (REAR, RH) | ||
| 111-9374 | [1] | HOUSING-REGULATOR | ||
| 122-8856 | [2] | GASKET | ||
| 133-8382 | [16] | BRACKET | ||
| 154-1616 | [1] | MANIFOLD (FRONT, LH) | ||
| 154-1617 | [1] | MANIFOLD (FRONT, RH) | ||
| 241-5928 | [16] | GASKET | ||
| 243-2288 | [6] | GASKET | ||
| (ABOVE PARTS ARE PART OF WATER LINES GROUP 130-2018) | ||||
| 7E-2580 | [16] | CLAMP-INJECTOR | ||
| 7F-8698 | [16] | BOLT (7/16-14X3.5-IN) | ||
| 392-0207 | [16] | INJECTOR GP-FUEL | ||
| (ABOVE PARTS ARE PART OF FUEL INJECTOR GROUP 136-5929) | ||||
| 2F-0808 | [4] | SCREW (6X0.25-IN) | ||
| 3S-5126 | [16] | BOLT-HIGH TEMPERATURE (3/8-16X0.625-IN) | ||
| 6V-1943 | [12] | BOLT-HIGH TEMPERATURE (3/8-16X1.125-IN) | ||
| 6V-6753 | [8] | BOLT-HIGH TEMPERATURE (3/8-16X1.375-IN) | ||
| 7E-8516 | [4] | CLAMP | ||
| 125-5375 | [16] | BOLT (3/8-16X1.75-IN) | ||
| 125-5376 | [8] | PLATE-CLAMP (COMPRESSOR) | ||
| 141-2754 | [2] | PLATE-IDENTIFICATION | ||
| 154-8741 | [2] | SEAL-O-RING | ||
| 177-1002 Y | [2] | CARTRIDGE GP-TURBOCHARGER | ||
| 178-2439 | [2] | SEAL AS | ||
| (EACH INCLUDES) | ||||
| 178-2437 | [1] | SEAL | ||
| 178-2438 | [1] | PLATE | ||
| 180-3945 | [2] | COVER-COMPRESSOR | ||
| 188-0471 | [4] | FLANGE-HALF | ||
| 453-7800 | [4] | GASKET-EXHAUST | ||
| 207-1390 | [2] | BELLOWS AS | ||
| 284-0753 | [8] | WASHER (11X25X2.5-MM THK) | ||
| 298-6389 | [8] | SPACER (10.3X19X15-MM THK) | ||
| 300-8579 | [8] | BOLT (3/8-16X2.5-IN) | ||
| 310-2233 | [8] | NUT-FLANGE (3/8-16-THD) | ||
| 329-3716 | [4] | FLANGE-HALF | ||
| (ABOVE PARTS ARE PART OF TURBO GROUP 159-8828 & 169-7322) | ||||
| 0S-0509 | [2] | BOLT (3/8-16X0.75-IN) | ||
| 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 5P-4255 | [2] | BOLT-LOCKING (3/8-16X1-IN) | ||
| 140-9594 | [1] | BRACKET AS | ||
| 140-9602 | [1] | BRACKET AS | ||
| (ABOVE PARTS ARE PART OF LIFTING GROUP 140-9593) | ||||
| 165-3929 | [1] | BOLT (3/8-16X1.5-IN) | ||
| 0S-1594 | [4] | BOLT (3/8-16X1-IN) | ||
| 397-9301 | [8] | WASHER-HARD (11.5X20X15-MM THK) | ||
| 2A-4639 | [8] | BOLT (3/8-16X1.625-IN) | ||
| 3B-1915 | [8] | BOLT (3/8-16X1.375-IN) | ||
| 4S-4869 | [1] | TEE | ||
| 5M-2894 | [20] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 5P-5777 | [1] | ADAPTER-O-RING | ||
| 6V-6609 | [7] | SEAL-O-RING | ||
| 6V-8398 | [3] | SEAL-O-RING | ||
| 6V-8782 | [1] | TEE | ||
| 6V-8801 | [2] | NUT (3/8-16-THD) | ||
| 6V-9002 | [1] | ELBOW | ||
| 6V-9830 | [1] | CAP | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 7N-3368 | [1] | GASKET | ||
| 7N-7878 | [4] | PLATE-COVER | ||
| 8M-0505 | [2] | ADAPTER | ||
| 9G-8140 | [1] | SPACER (10.5X25X15-MM THK) | ||
| 9X-8606 | [2] | CLIP | ||
| 107-0744 | [4] | BLOCK | ||
| 113-4647 | [1] | ADAPTER | ||
| 118-4728 | [2] | ELBOW | ||
| 146-3342 | [2] | COUPLING-PERMANENT | ||
| 180-8424 | [3] | SEAL-O-RING | ||
| 252-5658 | [2] | HOSE AS | ||
| 341-9211 | [8] | GASKET | ||
| 383-6859 | [1] | HOSE AS-WATER | ||
| (ABOVE PARTS ARE PART OF WATER LINES GROUP (TURBO) 161-4087) | ||||
| 0S-1594 | [4] | BOLT (3/8-16X1-IN) | ||
| 0T-0573 | [2] | BOLT (3/8-16X2.75-IN) | ||
| 1A-5964 | [4] | BOLT (3/8-16X4.5-IN) | ||
| 1W-7214 | [2] | ELBOW-DRAIN | ||
| 2P-7636 | [2] | CONNECTOR (3/4-16 STR-THD) | ||
| 4P-4460 | [2] | GASKET | ||
| 5P-9890 | [4] | SEAL-O-RING | ||
| 6I-0804 | [1] | ADAPTER-TURBOCHARGER OIL | ||
| 6I-0805 | [1] | ADAPTER-TURBOCHARGER OIL | ||
| 6V-4589 | [1] | SEAL-O-RING | ||
| 7N-7559 | [2] | GASKET | ||
| 091-0081 | [4] | SPACER (10.5X20X10-MM THK) | ||
| 8L-2786 | [2] | SEAL-O-RING | ||
| 9M-4584 | [1] | CONNECTOR | ||
| 9X-6458 | [1] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 113-4646 | [1] | TUBE AS | ||
| 113-4648 | [1] | ELBOW | ||
| 116-9863 | [1] | BRACKET | ||
| 130-2602 | [1] | TUBE AS | ||
| 166-5932 | [1] | TUBE AS | ||
| 179-1508 | [1] | ELBOW | ||
| 185-5855 | [1] | TUBE | ||
| (ABOVE PARTS ARE PART OF TURBO OIL LINES GROUP 162-5719) | ||||
| 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | ||
| 0L-2070 | [26] | BOLT (3/8-16X2.25-IN) | ||
| 1W-1251 | [4] | GASKET | ||
| 3V-3308 | [2] | WASHER-HARD (10.2X20.5X2.5-MM THK) | ||
| 6V-3917 | [4] | SEAL-O-RING | ||
| 6V-5504 | [16] | SEAL-O-RING | ||
| 7N-5079 | [16] | ELBOW | ||
| 7W-1944 | [2] | RETAINER | ||
| 0L-1329 | [2] | BOLT (1/2-13X3-IN) | ||
| 136-9629 | [1] | PLATE | ||
| 140-6458 | [1] | BRACKET | ||
| 140-6463 | [2] | BRACKET | ||
| 149-0233 | [1] | PIPE | ||
| 162-8864 | [1] | ELBOW-TURBOCHARGER EXHAUST | ||
| 164-0866 | [1] | PIPE | ||
| (ABOVE PARTS ARE PART OF AIR LINES GROUP 164-0867) | ||||
| 3B-1915 | [4] | BOLT (3/8-16X1.375-IN) | ||
| 3E-6916 | [112] | NUT-FULL (3/8-16-THD) | ||
| 4P-7680 | [16] | SPACER (10.5X22.5X15-MM THK) | ||
| 7L-6443 | [112] | BOLT-HIGH TEMPERATURE (3/8-16X2.25-IN) | ||
| 9L-7373 | [64] | BOLT-HIGH TEMPERATURE (3/8-16X2-IN) | ||
| 100-3145 | [1] | MANIFOLD-EXHAUST (FRONT, RH) | ||
| 100-3146 | [6] | MANIFOLD-EXHAUST (INTERMEDIATE, RH) | ||
| 100-3147 | [1] | MANIFOLD-EXHAUST (FRONT, LH) | ||
| 100-3148 | [6] | MANIFOLD-EXHAUST (INTERMEDIATE, LH) | ||
| 110-8314 | [224] | WASHER (10.3X18.3X2.66-MM THK) | ||
| 128-9508 | [1] | MANIFOLD-EXHAUST (REAR, RH) | ||
| 162-8865 | [1] | MANIFOLD-EXHAUST (REAR, LH) | ||
| 207-1364 | [14] | BELLOWS AS | ||
| 229-5332 | [16] | SEAL | ||
| 229-5333 | [28] | SEAL | ||
| 254-3261 | [1] | BRACKET AS (RH) | ||
| 254-3262 | [1] | BRACKET AS (LH) | ||
| (ABOVE PARTS ARE PART OF EXHAUST MANIFOLD GROUP 167-1759) | ||||
| 222-9921 | [1] | HOUSING-FLYWHEEL | ||
| (ABOVE PART IS PART OF FLYWHEEL HOUSING GROUP 101-1269) | ||||
| 1B-4218 | [6] | WASHER (0.39X0.625X0.064-IN THK) | ||
| 2A-5220 | [6] | PLUG | ||
| (ABOVE PARTS ARE PART OF FRONT HOUSING GROUP 4P-5426) | ||||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP55400037
140-9593: LIFTING GP-ENGINE
140-9593 LIFTING GP-ENGINE
PART OF 376-4846, 376-4847, 376-4848 ENGINE AR-COMPLETE
PART OF 376-4846, 376-4847, 376-4848 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 3516 MARINE ENGINE:
CATERPILLAR SIS#SEBP55400038
7C-7178: PAN GP-OIL
7C-7178 PAN GP-OIL -DEEP SUMP
PART OF 376-4846, 376-4847, 376-4848 ENGINE AR-COMPLETE
PART OF 376-4846, 376-4847, 376-4848 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 3516 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9Y-3085 Y | [1] | PAN GP-OIL (DEEP SUMP) | |
| 2. | 7E-2632 | [1] | GASKET-OIL PAN | |
| 3. | 0T-0065 | [50] | BOLT (3/8-16X3.5-IN) | |
| 4. | 5M-2894 | [52] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 5. | 0L-1143 | [18] | BOLT (3/8-16X2.5-IN) | |
| 6. | 7W-0129 | [1] | FLANGE | |
| 7. | 6V-5101 | [1] | SEAL-O-RING | |
| 8. | 3P-0654 | [1] | SEAL-O-RING | |
| 9. | 0S-1588 | [2] | BOLT (3/8-16X1.25-IN) | |
| 10. | 8M-9124 | [18] | WASHER (10X22.5X8-MM THK) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP55400039
9Y-3085: PAN GP-OIL
9Y-3085 PAN GP-OIL -DEEP SUMP
PART OF 7C-7178 PAN GP-OIL
PART OF 7C-7178 PAN GP-OIL
For full view, you need register
Parts for your 3516 MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1W-1564 C | [1] | SCREEN AS-SUCTION (ENGINE OIL PAN) | |
| 2. | 4B-2363 | [2] | PLUG-OIL DRAIN (ENGINE OIL PAN) | |
| 3. | 6F-4868 | [2] | GASKET | |
| 4. | 7C-4715 | [1] | CONNECTOR | |
| 5. | 7W-0129 | [1] | FLANGE | |
| 6. | 111-2081 | [1] | HOUSING-OIL | |
| 7. | 114-2413 | [1] | TUBE AS | |
| 8. | 149-9298 | [1] | COVER | |
| 9. | 228-8925 C | [1] | TUBE-SUCTION | |
| 10. | 228-8926 C | [1] | ADAPTER | |
| 11. | 229-8391 C | [1] | PAN AS-OIL | |
| 12. | 231-5867 C | [4] | CLAMP | |
| 13. | 0L-1351 C | [5] | BOLT (3/8-16X0.875-IN) | |
| 14. | 0S-1585 C | [4] | BOLT (1/2-13X1.5-IN) | |
| 15. | 0S-1588 | [4] | BOLT (3/8-16X1.25-IN) | |
| 16. | 0S-1590 | [2] | BOLT (3/8-16X2-IN) | |
| 17. | 0S-1594 | [2] | BOLT (3/8-16X1-IN) | |
| 18. | 125-9794 | [1] | SEAL-O-RING | |
| 19. | 1A-2029 C | [4] | BOLT (3/8-16X1.125-IN) | |
| 20. | 1K-6872 C | [4] | LOCKNUT (1/2-13-THD) | |
| 21. | 3P-0654 C | [2] | SEAL-O-RING | |
| 22. | 4B-3140 | [1] | COVER | |
| 23. | 5M-2894 C | [11] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 24. | 5P-7818 | [1] | SEAL-O-RING | |
| 25. | 5P-8245 C | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 26. | 5P-8872 | [1] | SEAL-O-RING | |
| 27. | 6V-5101 | [1] | SEAL-O-RING | |
| 28. | 7X-1547 | [2] | SEAL-O-RING | |
| 29. | 8M-9024 | [2] | WASHER-HARD (10.2X22.5X5-MM THK) | |
| 30. | 8T-6762 | [1] | PLUG-PIPE (1/2-14-THD) | |
| 31. | 9L-1480 | [1] | GASKET | |
| C | CHANGE FROM PREVIOUS TYPE | |||
Information:
BASIC ENGINE
GEAR GP
Engine News
Special Instruction
Machining of Replacement Sleeve Bearings{1206, 1212, 1234}
Machining of Replacement Sleeve Bearings{1206, 1212, 1234}
Machining of Replacement Sleeve Bearings{1206, 1212, 1234}
Service Letter-NACD
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Technical Information Bulletin
Interference between Camshaft Drive Gears and Bolts in the Flywheel Housing in Some 3500 and G3500 Engines{1204}
Interference between Camshaft Drive Gears and Bolts in the Flywheel Housing in Some 3500 and G3500 Engines{1204}
Interference between Camshaft Drive Gears and Bolts in the Flywheel Housing in Some 3500 and G3500 Engines{1204}
Specifications
Service Letter-China
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Service Letter-APD
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
The 4P5437 Gear Shaft In The Rear Gear Train Needs To Be Inspected For Debris On Certain 3508, 3512, 3516, G3508, G3512 and G3516 Engines
Disassembly and Assembly
Service Magazine
Caterpillar Parts SIS Catalog 3516 :
Truck sale:
719,892
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
298,989
500,000
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
- mobile generator sets
FOLEY EQUIPMENT COMPANY
500,000
Caterpillar PM3516, mobile generator sets, Construction
- mobile generator sets
FOLEY EQUIPMENT COMPANY
- mobile generator sets
FOLEY EQUIPMENT COMPANY
800,000
Caterpillar 3516, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC