361-9708 TURBOCHARGER GP PART OF 237-4281 TURBOCHARGER GP C18 INDUSTRIAL ENGINE



AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
FUEL SYSTEM
FILTER GP-FUEL
LINES GP-FUEL
FITTING GP-FUEL
LINES GP-FUEL INJECTION
KIT-FUEL SYSTEM PARTS
LINES GP-FUEL

INDUSTRIAL ENGINE C18 INDUSTRIAL ENGINE JDA
 C18 Industrial Engine JDA00001-UP SEBP5544 C18 JDA   (2008)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
TURBOCHARGER GP
359-5392 TURBOCHARGER GP
TURBOCHARGER GP
359-5393 TURBOCHARGER GP
TURBOCHARGER GP
361-9708 TURBOCHARGER GP
TURBOCHARGER GP
380-8698 TURBOCHARGER GP
 

#SEBP55440150
 

361-9708: TURBOCHARGER GP

361-9708 TURBOCHARGER GP
PART OF 237-4281 TURBOCHARGER GP
i04996110 SEBP5544
3619708 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 9N-2038 [1] CLAMP AS-TURBINE  
2. 161-6963 [2] CLAMP  
3. 268-2960 [1] CLAMP AS (COMPRESSOR)  
4. 301-9278 [1] CARTRIDGE GP-TURBOCHARGER  
5. 337-4178 E HOSE (37-CM)  
6. 258-4524 E SLEEVE (26-CM)  
7. 115-7087 M [1] BOLT (M6X0.04X10.4-MM)  
8. 161-6958 [1] CLIP-HOSE  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP55440151
 

380-8698: TURBOCHARGER GP

380-8698 TURBOCHARGER GP
S/N JDA902-UP
PART OF 262-1078 TURBOCHARGER GP
i05252222 SEBP5544
3808698 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 115-7087 M [2] BOLT (M6X0.04X10.4-MM)  
2. 161-6958 [2] CLIP-HOSE  
3. 161-6963 [2] CLAMP  
4. 301-9278 [1] CARTRIDGE GP-TURBOCHARGER  
5. 268-2960 [1] CLAMP AS (COMPRESSOR)  
6. 9N-2038 [1] CLAMP AS-TURBINE  
7. 242-3360 E HOSE (48-CM)  
8. 258-4524 E SLEEVE (15-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP55440152
 

159-9491: BASE GP-FUEL FILTER

159-9491 BASE GP-FUEL FILTER
S/N JDA1-821
PART OF 159-9823 PUMP GP-FUEL PRM & SEC FILTER
i01981198 SEBP5544
1599491 BASE GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 136-5017 [1] BASE AS-FUEL FILTER  
1A. 9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
2. 274-7395 Y [1] SENSOR GP-TEMPERATURE (FUEL)  
3. 139-6873 Y [1] VALVE GP-FUEL BYPASS (FILTER)  
4. 143-2933 [1] FITTING  
5. 233-6742 CY [1] VALVE GP-CHECK (FUEL)  
6. 238-5081 C [1] SEAL-O-RING  
7. 183-3407 C [1] PLUG AS  
  9S-8004 [1] PLUG (9/16-18-THD)  
  214-7568 [1] SEAL-O-RING  
8. 228-7089 [1] SEAL-O-RING  
9. 238-5080 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP55440153
 

170-1213: FITTING GP-FUEL LINES

170-1213 FITTING GP-FUEL LINES
PROVIDES VERTICLE MOUNTING ORIENTATION ON SIDE OF FUEL PUMP
i01045792 SEBP5544
1701213 FITTING GP-FUEL LINES Parts scheme
  For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 357-4599 [1] ELBOW AS  
  103-4675 [1] ELBOW  
  238-5080 [1] SEAL-O-RING  
 

#SEBP55440154
 

201-6631: FITTING GP-FUEL LINES

201-6631 FITTING GP-FUEL LINES
FOR USE WITH A 90 DEGREE ELBOW WITH A 3/4-16 X 37 DEGREE END
i01453793 SEBP5544
2016631 FITTING GP-FUEL LINES Parts scheme
  For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 303-1506 [1] ELBOW AS  
  214-7568 [1] SEAL-O-RING  
  4K-6297 [1] ELBOW  
 

#SEBP55440155
 

108-2312: FITTING GP-QUICK DISCONNECT

108-2312 FITTING GP-QUICK DISCONNECT
i00480598 SEBP5544
1082312 FITTING GP-QUICK DISCONNECT Parts scheme
  For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 6V-0852 [1] CAP-DUST  
2. 164-5567 [1] COUPLER AS-QUICK DISCONNECT (MALE)  
2A. 214-7568 [1] SEAL-O-RING  
  6V-3965 [1] FITTING (QUICK DISCONNECT)  
 

#SEBP55440156
 

291-5911: INJECTOR GP-FUEL

291-5911 INJECTOR GP-FUEL
PART OF 294-7615 PUMP GP-FUEL INJECTION
i02640186 SEBP5544
2915911 INJECTOR GP-FUEL Parts scheme
  For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 230-3728 [1] SEAL-O-RING  
2. 230-3775 [1] SEAL-O-RING  
3. 9X-7317 [1] SEAL-O-RING  
 

#SEBP55440157
 

248-1394: KIT-INJECTOR

248-1394 KIT-INJECTOR
FOR USE WITH PQ0863
FIELD INSTALLATION
i04536010 SEBP5544
  For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
  9X-7317 [1] SEAL-O-RING  
  230-3728 [1] SEAL-O-RING  
  230-3775 [1] SEAL-O-RING  
   
    FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSISST, PLEASE VISIT
   
    HTTPS://DEALER.CAT.COM/RELATED
 

#SEBP55440158
 

325-3282: LINES GP-FUEL

325-3282 LINES GP-FUEL
S/N JDA1-821
i03362935 SEBP5544
3253282 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 3S-2093 [7] STRAP-CABLE  
2. 4P-0902 I [1] HOSE AS  
3. 118-7809 [2] PLATE  
4. 160-4372 [1] SUPPORT-BASE  
5. 168-8974 [1] TUBE AS (FUEL SUPPLY)  
6. 172-3443 I [1] HOSE AS  
7. 193-7404 [1] MANIFOLD GP-FUEL  
7A. 2R-6806 [2] CONNECTOR  
7B. 6V-6609 [2] SEAL-O-RING  
7C. 9S-8005 [2] PLUG (3/4-16-THD)  
7D. 033-6042 [2] SEAL-O-RING  
  168-0300 [1] MANIFOLD  
8. 198-6855 [1] TUBE AS  
9. 266-6101 [1] HARNESS AS-WIRING (JUMPER)  
  102-8806 KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8737 [6] PLUG-SEAL  
  155-2270 KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, INTERFACE SEAL, & WEDGE
  180-9339 [2] PIN-CONNECTOR (14-GA TO 18-GA)  
  9X-3401 PIN-CONNECTOR (16-GA TO 18-GA)  
  126-1767 PIN-CONNECTOR (14-GA TO 16-GA)  
  180-9340 [2] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  9X-3402 SOCKET-CONNECTOR (16-GA TO 18-GA)  
  126-1768 SOCKET-CONNECTOR (14-GA TO 16-GA)  
10. 030-7947 [2] ADAPTER-ELBOW  
11. 033-6042 [6] SEAL-O-RING  
12. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
13. 0S-0509 [1] BOLT (3/8-16X0.75-IN)  
14. 0S-1594 [1] BOLT (3/8-16X1-IN)  
15. 0S-1619 [2] BOLT (3/8-16X3-IN)  
16. 0T-0573 [1] BOLT (3/8-16X2.75-IN)  
17. 1A-4273 [1] BOLT (5/8-18X1.25-IN)  
18. 1A-5964 [2] BOLT (3/8-16X4.5-IN)  
19. 1V-1984 [1] CLIP  
20. 2R-6806 [4] CONNECTOR  
21. 4D-7735 [3] CLIP  
22. 5M-2894 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
23. 5P-8247 [1] WASHER-HARD (17X32X3.5-MM THK)  
24. 5P-9297 [1] CLIP (LOOP)  
25. 9S-8752 [3] NUT-FULL (3/8-16-THD)  
26. 9X-6458 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
27. 8C-5064 E CONDUIT-FLEXIBLE (17.75-MM ID, SPLIT)(65-CM)  
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP55440159
 

325-3282: LINES GP-FUEL

325-3282 LINES GP-FUEL
S/N JDA822-UP
i04441598 SEBP5544
3253282 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 3S-2093 [8] STRAP-CABLE  
2. 4P-0902 I [1] HOSE AS  
3. 118-7809 [2] PLATE  
4. 160-4372 [1] SUPPORT-BASE  
5. 168-8974 [1] TUBE AS (FUEL SUPPLY)  
6. 172-3443 I [1] HOSE AS  
7. 193-7404 Y [1] MANIFOLD GP-FUEL  
8. 198-6855 [1] TUBE AS  
9. 370-9476 CY [1] HARNESS AS-SENSOR  
10. 191-7805 C [2] ELBOW AS  
    (EACH INCLUDES)
  030-7947 [1] ADAPTER-ELBOW  
  214-7568 [1] SEAL-O-RING  
11. 5S-0003 [2] NUT (5/16-18-THD)  
12. 7V-6571 [2] GROMMET  
13. 0S-0509 [1] BOLT (3/8-16X0.75-IN)  
14. 0S-1594 [1] BOLT (3/8-16X1-IN)  
15. 0S-1619 [2] BOLT (3/8-16X3-IN)  
16. 0T-0573 [1] BOLT (3/8-16X2.75-IN)  
17. 4P-7581 [1] CLIP (LADDER)  
18. 1A-5964 [2] BOLT (3/8-16X4.5-IN)  
19. 1V-1984 [1] CLIP  
20. 313-9614 C [4] ADAPTER AS  
    (EACH INCLUDES)
  2R-6806 [1] CONNECTOR  
  214-7568 [1] SEAL-O-RING  
21. 4D-7735 [1] CLIP  
22. 5M-2894 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
23. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
24. 5P-9297 [1] CLIP (LOOP)  
25. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
26. 9X-6458 [1] WASHER-HARD (10.2X22.5X3-MM THK)  
27. 8C-5064 E CONDUIT-FLEXIBLE (17.75-MM ID, SPLIT)(60-CM)  
28. 8T-1890 [2] CLIP (TAB)  
29. 8T-1889 [2] CLIP (SLOT)  
30. 0S-1588 [2] BOLT (3/8-16X1.25-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
A New Heat Shield Is Available for Some C18 Engines {1067}
2009/12/01
New Turbochargers Are Now Used on Certain C18 Industrial Engines {1052, 1053}
2010/09/14
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/06/26
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Operation and Maintenance Manual
Turbocharger - Inspect
C18 Industrial Engines
Special Instruction
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
A New Warranty Process for Variable Valve Actuator (VVA) Claims Is Now Used for Certain C11 Through C18 Engines {1052, 1130}
A New Warranty Process for Variable Valve Actuator (VVA) Claims Is Now Used for Certain C11 Through C18 Engines {1052, 1130}
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Turbocharger - Inspect
C15 and C18 Industrial Engines
Disassembly and Assembly
Turbocharger - Remove - Single Turbocharger
C15 and C18 Industrial Engines
Turbocharger - Install - Single Turbocharger
C15 and C18 Industrial Engines
Turbocharger - Remove - Dual Turbocharger
C15 and C18 Industrial Engines
Turbocharger - Install - Dual Turbocharger
C15 and C18 Industrial Engines
Service Magazine
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog C18 :

TURBOCHARGER GP
359-5393 TURBOCHARGER GP
TURBOCHARGER GP
359-5392 TURBOCHARGER GP
TURBOCHARGER GP
302-7448 TURBOCHARGER GP
TURBOCHARGER GP
302-7443 TURBOCHARGER GP
TURBOCHARGER GP
262-1078 TURBOCHARGER GP
TURBOCHARGER GP
262-1078 TURBOCHARGER GP
252-8017 TURBOCHARGER GP
TURBOCHARGER GP
250-6903 TURBOCHARGER GP
TURBOCHARGER GP
380-8698 TURBOCHARGER GP
BASE GP-FUEL FILTER
159-9491 BASE GP-FUEL FILTER
FITTING GP-FUEL LINES
170-1213 FITTING GP-FUEL LINES
FITTING GP-FUEL LINES
201-6631 FITTING GP-FUEL LINES
FITTING GP-QUICK DISCONNECT
108-2312 FITTING GP-QUICK DISCONNECT
INJECTOR GP-FUEL
291-5911 INJECTOR GP-FUEL
248-1394 KIT-INJECTOR
LINES GP-FUEL
325-3282 LINES GP-FUEL

Truck sale:

Caterpillar C18, Construction
89,000 USD 
Caterpillar C18, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar C18, Construction
34,700 
Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates
Caterpillar C18, Construction
34,800 
Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates
Caterpillar C18, Construction
32,850 
Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates
Caterpillar C18, Construction
36,800 
Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates