AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GPLUBRICATION SYSTEM
GAUGE GP-OIL LEVEL (DIPSTICK)PUMP GP-ENGINE OIL
COOLING SYSTEM
FAN GPAIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
#SEBP55650530
212-1487: LINES GP-TURBOCHARGER OIL
212-1487 LINES GP-TURBOCHARGER OIL
S/N JRE1-UP; PDM1-UP; MCW1-UP
REQUIRES FORWARD FACING EXHAUST AND HIGH MOUNT TURBO
PART OF 481-4668 ENGINE AR-COMPLETE
AN ATTACHMENT
S/N JRE1-UP; PDM1-UP; MCW1-UP
REQUIRES FORWARD FACING EXHAUST AND HIGH MOUNT TURBO
PART OF 481-4668 ENGINE AR-COMPLETE
AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3L-9689 | [1] | WASHER (10.5X25.4X5-MM THK) | |
| 2. | 4N-2040 | [1] | ELBOW-DRAIN | |
| 3. | 7N-3448 | [1] | TUBE AS-OIL | |
| 4. | 9M-7540 | [2] | CLAMP-TUBE | |
| 5. | 126-2702 | [1] | SEAL-INTEGRAL | |
| 6. | 204-7810 | [1] | TUBE AS (DRAIN) | |
| 7. | 165-3931 | [2] | BOLT (3/8-16X1.75-IN) | |
| 8. | 0S-1619 | [1] | BOLT (3/8-16X3-IN) | |
| 9. | 114-2687 | [1] | SEAL-O-RING | |
| 10. | 1C-2251 | [1] | BOLT (3/8-16X1.87-IN) | |
| 11. | 1A-2029 | [1] | BOLT (3/8-16X1.125-IN) | |
| 12. | 198-6068 | [1] | SEAL-INTEGRAL | |
| 13. | 3B-1915 | [2] | BOLT (3/8-16X1.375-IN) | |
| 14. | 4N-0699 | [1] | GASKET | |
| 15. | 5M-2894 | [5] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 16. | 365-0576 | [1] | CONNECTOR AS | |
| 9M-4584 | [1] | CONNECTOR | ||
| 238-5081 | [1] | SEAL-O-RING | ||
| 17. | 9S-8752 | [1] | NUT-FULL (3/8-16-THD) |
#SEBP55650531
240-6053: LINES GP-TURBOCHARGER OIL
240-6053 LINES GP-TURBOCHARGER OIL
S/N JRE1-2773; MCW1-UP
MID MOUNT
FOR USE WITH REAR EXHAUST SETUP
CANNOT BE USED WITH TWIN TURBO
AN ATTACHMENT
S/N JRE1-2773; MCW1-UP
MID MOUNT
FOR USE WITH REAR EXHAUST SETUP
CANNOT BE USED WITH TWIN TURBO
AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 106-3544 | [1] | ELBOW | |
| 2. | 126-2702 | [1] | SEAL-INTEGRAL | |
| 3. | 133-8940 | [1] | TUBE AS-DRAIN | |
| 4. | 198-6068 | [1] | SEAL-INTEGRAL | |
| 5. | 231-5219 | [1] | HOSE AS | |
| 6. | 114-2687 | [1] | SEAL-O-RING | |
| 7. | 349-8519 | [1] | ELBOW AS | |
| 228-7091 | [1] | SEAL-O-RING | ||
| 238-5081 | [1] | SEAL-O-RING | ||
| 8. | 0L-2070 | [2] | BOLT (3/8-16X2.25-IN) | |
| 9. | 1C-2251 | [2] | BOLT (3/8-16X1.87-IN) | |
| 10. | 3B-1915 | [2] | BOLT (3/8-16X1.375-IN) | |
| 11. | 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 12. | 230-3775 | [1] | SEAL-O-RING |
#SEBP55650532
311-1433: LINES GP-TURBOCHARGER OIL
311-1433 LINES GP-TURBOCHARGER OIL
S/N JRE1-UP; MCW1-UP
FOR USE WITH FRONT EXHAUST CONFIGURATION, WATER COOLED TURBOS
AN ATTACHMENT
S/N JRE1-UP; MCW1-UP
FOR USE WITH FRONT EXHAUST CONFIGURATION, WATER COOLED TURBOS
AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4N-2040 | [1] | ELBOW-DRAIN | |
| 2. | 7N-7559 | [1] | GASKET | |
| 3. | 9M-7540 | [2] | CLAMP-TUBE | |
| 4. | 311-1434 | [1] | TUBE AS | |
| 5. | 311-1435 | [1] | TUBE AS | |
| 6. | 353-5133 | [1] | ELBOW AS | |
| 030-7949 | [1] | ELBOW | ||
| 6A. | 238-5081 | [1] | SEAL-O-RING | |
| 7. | 0S-1571 | [3] | BOLT (3/8-16X1.75-IN) | |
| 8. | 0S-1619 | [1] | BOLT (3/8-16X3-IN) | |
| 9. | 1A-2029 | [3] | BOLT (3/8-16X1.125-IN) | |
| 10. | 9S-8752 | [1] | NUT-FULL (3/8-16-THD) | |
| 11. | 4N-0699 | [1] | GASKET | |
| 12. | 5M-2894 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 13. | 112-3540 | [1] | SEAL-O-RING | |
| 14. | 7N-8875 | [1] | GASKET | |
| 15. | 9M-6527 | [1] | WASHER-HARD (10.2X25.5X5-MM THK) |
#SEBP55650533
170-3562: MOUNTING GP-OIL LEVEL GAUGE
170-3562 MOUNTING GP-OIL LEVEL GAUGE
S/N JRE1-UP; MCW1-UP
FOR USE WITH @@@@@162-2918@@@@@
AN ATTACHMENT
S/N JRE1-UP; MCW1-UP
FOR USE WITH @@@@@162-2918@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
CATERPILLAR SIS#SEBP55650534
161-4113: PUMP GP-ENGINE OIL
161-4113 PUMP GP-ENGINE OIL
S/N JRE1-UP; PDM1-UP; MCW1-UP
PART OF 359-2104, 482-8728 ENGINE AR-CORE
ALSO AN ATTACHMENT
S/N JRE1-UP; PDM1-UP; MCW1-UP
PART OF 359-2104, 482-8728 ENGINE AR-CORE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1W-7238 | [1] | SHAFT AS-PUMP DRIVE (8-TEETH) | |
| 2. | 1W-7239 | [1] | SHAFT AS-IDLER (8-TEETH) | |
| 3. | 2P-3205 | [4] | BOLT-WASHER HEAD (3/8-16X1.75-IN) | |
| 4. | 2S-2760 | [1] | SPRING | |
| 5. | 6N-1931 | [1] | PLUNGER | |
| 6. | 9Y-1792 | [1] | RETAINER | |
| 7. | 235-1587 | [1] | BODY AS | |
| 7N-2156 | [2] | BUSHING | ||
| 8M-8489 | [2] | DOWEL | ||
| 8. | 127-6356 | [1] | COVER AS-PUMP | |
| 8S-6511 | [2] | BUSHING | ||
| 9. | 1M-0644 | [2] | BOLT (3/8-16X2.25-IN) | |
| 10. | 2S-7905 | [1] | PLUG-PIPE | |
| 11. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) |
#SEBP55650535
228-8531: ADAPTER GP-FAN
228-8531 ADAPTER GP-FAN
S/N JRE1-UP; MCW1-UP
FOR USE WITH FAN DRIVE AND 43 INCH BLOWER FAN ON E616- & E617-, FAN DRIVE AND 40 INCH BLOWER FAN ON E982-, E985-, E708-, & E709-
AN ATTACHMENT
S/N JRE1-UP; MCW1-UP
FOR USE WITH FAN DRIVE AND 43 INCH BLOWER FAN ON E616- & E617-, FAN DRIVE AND 40 INCH BLOWER FAN ON E982-, E985-, E708-, & E709-
AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
CATERPILLAR SIS#SEBP55650536
228-8532: ADAPTER GP-FAN
228-8532 ADAPTER GP-FAN
S/N JRE1-UP; PDM1-UP; MCW1-UP
PART OF 436-3177, 469-0651 INSTALLATION AR-ENGINE
FOR USE WITH FAN DRIVE AND 43 INCH SUCTION FAN
AN ATTACHMENT
S/N JRE1-UP; PDM1-UP; MCW1-UP
PART OF 436-3177, 469-0651 INSTALLATION AR-ENGINE
FOR USE WITH FAN DRIVE AND 43 INCH SUCTION FAN
AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
CATERPILLAR SIS#SEBP55650537
228-8537: ADAPTER GP-FAN
228-8537 ADAPTER GP-FAN
S/N JRE1-UP; MCW1-UP
FOR USE WITH FAN DRIVE AND 40 INCH BLOWER FAN ON E616- & E617-, FAN DRIVE AND 43 INCH BLOWER FAN ON E982-, E985-, E708-, & E709-
AN ATTACHMENT
S/N JRE1-UP; MCW1-UP
FOR USE WITH FAN DRIVE AND 40 INCH BLOWER FAN ON E616- & E617-, FAN DRIVE AND 43 INCH BLOWER FAN ON E982-, E985-, E708-, & E709-
AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4N-3123 | [1] | ADAPTER-FAN |
#SEBP55650538
228-8538: ADAPTER GP-FAN
228-8538 ADAPTER GP-FAN
S/N JRE1-UP; MCW1-UP
FOR USE WITH FAN DRIVE AND 40 INCH SUCTION FAN
AN ATTACHMENT
S/N JRE1-UP; MCW1-UP
FOR USE WITH FAN DRIVE AND 40 INCH SUCTION FAN
AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [1] | ADAPTER-FAN | ||
#SEBP55650539
6N-6598: ADAPTER-FAN
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
Information:
AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
Truck Engine News
Engine News
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Operation and Maintenance Manual
Special Instruction
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
A New Warranty Process for Variable Valve Actuator (VVA) Claims Is Now Used for Certain C11 Through C18 Engines {1052, 1130}
A New Warranty Process for Variable Valve Actuator (VVA) Claims Is Now Used for Certain C11 Through C18 Engines {1052, 1130}
A New Warranty Process for Variable Valve Actuator (VVA) Claims Is Now Used for Certain C11 Through C18 Engines {1052, 1130}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REMOVING THE PAINT FROM THE EXHAUST MANIFOLD AND/OR TURBO ON CERTAIN INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REMOVING THE PAINT FROM THE EXHAUST MANIFOLD AND/OR TURBO ON CERTAIN INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REMOVING THE PAINT FROM THE EXHAUST MANIFOLD AND/OR TURBO ON CERTAIN INDUSTRIAL ENGINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REMOVING THE PAINT FROM THE EXHAUST MANIFOLD AND/OR TURBO ON CERTAIN INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REMOVING THE PAINT FROM THE EXHAUST MANIFOLD AND/OR TURBO ON CERTAIN INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REMOVING THE PAINT FROM THE EXHAUST MANIFOLD AND/OR TURBO ON CERTAIN INDUSTRIAL ENGINES
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGER TURBINE HOUSINGS.
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGER TURBINE HOUSINGS.
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGER TURBINE HOUSINGS.
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REMOVING THE PAINT FROM THE EXHAUST MANIFOLD AND/OR TURBO ON CERTAIN INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REMOVING THE PAINT FROM THE EXHAUST MANIFOLD AND/OR TURBO ON CERTAIN INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REMOVING THE PAINT FROM THE EXHAUST MANIFOLD AND/OR TURBO ON CERTAIN INDUSTRIAL ENGINES
Testing and Adjusting
Troubleshooting
Disassembly and Assembly
Service Magazine
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
