BASIC ENGINE
HOUSING GP-FLYWHEELGEAR GP
AIR COMPRESSOR GP
BASIC ENGINE
HOUSING GP-FLYWHEEL
#SEBP55690160
354-0782: HOUSING GP-FLYWHEEL
354-0782 HOUSING GP-FLYWHEEL
PROVIDES A SAE NO. 1 FLYWHEEL HOUSING WITH SAE TYPE 3 STARTER BORE, LEFT AND RIGHT, 24 7/16-14 THREAD HOLES IN A STANDARD SAE PATTERN, 3 3/8-16 AT THE 3, 10, AND 12 O'CLOCK LOCATIONS, AND INCLUDES SET SCREW AT THE 6 O'CLOCK POSITION
AN ATTACHMENT
PROVIDES A SAE NO. 1 FLYWHEEL HOUSING WITH SAE TYPE 3 STARTER BORE, LEFT AND RIGHT, 24 7/16-14 THREAD HOLES IN A STANDARD SAE PATTERN, 3 3/8-16 AT THE 3, 10, AND 12 O'CLOCK LOCATIONS, AND INCLUDES SET SCREW AT THE 6 O'CLOCK POSITION
AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 108-4744 | [1] | HOUSING AS-FLYWHEEL | |
| 9K-2175 | [1] | SETSCREW | ||
| 2. | 155-5619 | [1] | GASKET | |
| 3. | 319-0785 Y | [1] | SEAL GP-CRANKSHAFT (REAR)(FLYWHEEL HOUSING) | |
| 4. | 0S-1571 | [5] | BOLT (3/8-16X1.75-IN) | |
| 5. | 0S-1591 | [8] | BOLT (3/8-16X1.5-IN) | |
| 6. | 0S-1594 | [3] | BOLT (3/8-16X1-IN) | |
| 7. | 0S-1619 | [1] | BOLT (3/8-16X3-IN) | |
| 8. | 0T-0573 | [2] | BOLT (3/8-16X2.75-IN) | |
| 9. | 234-8937 | [1] | SEAL-INTEGRAL | |
| 10. | 2A-1162 | [1] | GASKET | |
| 11. | 2P-2772 | [1] | COVER | |
| 12. | 5F-0304 | [1] | PLUG | |
| 13. | 8F-1846 | [1] | GASKET | |
| 14. | 5J-5793 | [9] | BOLT-12 POINT HEAD (1/2-13X2-IN) | |
| 15. | 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 16. | 5P-8245 | [9] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 17. | 7X-7731 | [3] | PLUG-PIPE (3/4-14-THD) | |
| 18. | 8F-3030 | [1] | FLANGE | |
| 19. | 8T-6765 | [2] | PLUG-PIPE (1/4-18-THD) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP55690161
354-2382: HOUSING GP-FLYWHEEL
354-2382 HOUSING GP-FLYWHEEL
PART OF 353-9858, 354-2858 HOUSING GP-FLYWHEEL
AN ATTACHMENT
PART OF 353-9858, 354-2858 HOUSING GP-FLYWHEEL
AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 353-9857 | [1] | HOUSING AS-FLYWHEEL | |
| 4N-0684 | [2] | DOWEL | ||
| 8M-9315 | [2] | BUSHING | ||
| 2. | 2A-1162 | [1] | GASKET | |
| 3. | 307-2671 | [1] | PLUG AS | |
| 9S-8002 | [1] | PLUG (7/16-20-THD) | ||
| 214-7566 | [1] | SEAL-O-RING | ||
| 4. | 307-2673 | [3] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 9S-8005 | [1] | PLUG (3/4-16-THD) | ||
| 238-5080 | [1] | SEAL-O-RING | ||
| 5. | 321-8642 | [5] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 9S-8003 | [1] | PLUG (1/2-20-THD) | ||
| 214-7567 | [1] | SEAL-O-RING | ||
| 6. | 5F-0304 | [1] | PLUG | |
| 7. | 183-3407 | [1] | PLUG AS | |
| 214-7568 | [1] | SEAL-O-RING | ||
| 9S-8004 | [1] | PLUG (9/16-18-THD) | ||
| 8. | 3B-0551 | [1] | PLUG-PIPE | |
#SEBP55690162
354-2858: HOUSING GP-FLYWHEEL
354-2858 HOUSING GP-FLYWHEEL
PROVIDES A SAE #1 HOUSING WITH 2 PUMP DRIVES AND A SEPARATE DRY COMPARTMENT. PROVIDES 1 SAE TYPE 3 LH STARTER BORE. HAS 11 7/16-14 THREADED HOLES IN A 15 DEGREES CLOCKED PATTERN. PROVIDES 2 SIDE MOUNTING PADS, 8 5/8-11 HOLES, AND AN OIL SUPPLY HOSE ASSEMBLY
FOR USE WITH IVA LINES GROUPS
AN ATTACHMENT
PROVIDES A SAE #1 HOUSING WITH 2 PUMP DRIVES AND A SEPARATE DRY COMPARTMENT. PROVIDES 1 SAE TYPE 3 LH STARTER BORE. HAS 11 7/16-14 THREADED HOLES IN A 15 DEGREES CLOCKED PATTERN. PROVIDES 2 SIDE MOUNTING PADS, 8 5/8-11 HOLES, AND AN OIL SUPPLY HOSE ASSEMBLY
FOR USE WITH IVA LINES GROUPS
AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-8374 | [1] | COVER-PUMP | |
| 2. | 390-3172 | [1] | HOSE & TUBE AS | |
| 3. | 157-0214 | [1] | COVER | |
| 4. | 159-0926 | [19] | WASHER | |
| 5. | 175-3721 | [1] | COVER | |
| 6. | 303-1506 | [1] | ELBOW AS | |
| 4K-6297 | [1] | ELBOW | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 7. | 227-0838 Y | [1] | SEAL GP-CRANKSHAFT (REAR) | |
| 8. | 354-2382 Y | [1] | HOUSING GP-FLYWHEEL | |
| 9. | 0S-1594 | [1] | BOLT (3/8-16X1-IN) | |
| 10. | 0S-1617 | [19] | BOLT (5/16-18X0.75-IN) | |
| 11. | 0S-1619 | [1] | BOLT (3/8-16X3-IN) | |
| 12. | 165-3930 | [6] | BOLT (3/8-16X1.625-IN) | |
| 13. | 165-3932 | [4] | BOLT (3/8-16X2-IN) | |
| 14. | 223-4903 | [3] | BOLT (3/8-16X5-IN) | |
| 15. | 234-8937 | [1] | SEAL-INTEGRAL | |
| 16. | 2A-1162 | [1] | GASKET | |
| 17. | 2H-3855 | [2] | BOLT (1/2-13X0.875-IN) | |
| 18. | 2P-2772 | [1] | COVER | |
| 19. | 307-2673 | [1] | PLUG AS | |
| 9S-8005 | [1] | PLUG (3/4-16-THD) | ||
| 238-5080 | [1] | SEAL-O-RING | ||
| 20. | 353-5134 | [1] | ELBOW AS | |
| 118-4728 | [1] | ELBOW | ||
| 238-5080 | [1] | SEAL-O-RING | ||
| 21. | 6V-0826 | [1] | GROMMET | |
| 22. | 365-3549 | [1] | STUD | |
| 23. | 4B-4043 | [1] | BOLT (5/8-11X1.375-IN) | |
| 24. | 4M-0189 | [1] | SEAL-O-RING | |
| 25. | 5F-0304 | [1] | PLUG | |
| 26. | 5F-3106 | [1] | SEAL-O-RING | |
| 27. | 5J-5793 | [1] | BOLT-12 POINT HEAD (1/2-13X2-IN) | |
| 28. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 29. | 5P-8245 | [9] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 30. | 5P-8247 | [2] | WASHER-HARD (17X32X3.5-MM THK) | |
| 31. | 6V-8969 | [9] | SCREW-BUTTON HEAD (1/4-20X0.5-IN) | |
| 32. | 8D-0648 | [8] | BOLT-12 POINT HEAD (1/2-13X4.5-IN) | |
| 33. | 301-7791 | [1] | CLIP (SLOT) | |
| 34. | 301-7792 | [1] | CLIP (TAB) | |
| 35. | 9S-8752 | [1] | NUT-FULL (3/8-16-THD) | |
| 36. | 9X-6458 | [1] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 37. | 1U-8846 B | SEALANT-GASKET | ||
| 38. | 5S-7379 | [1] | BOLT (3/8-16X0.875-IN) | |
| 39. | 8E-3430 | [1] | STRIP AS | |
| 40. | 8T-4896 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| B | USE AS REQUIRED | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP55690163
352-6465: HOUSING GP-FRONT
352-6465 HOUSING GP-FRONT
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 155-9524 | [1] | SEAL-INTEGRAL | |
| 2. | 166-9144 | [1] | GASKET | |
| 3. | 353-2594 | [1] | PLATE AS-FRONT HOUSING | |
| 126-1757 | [11] | WASHER (10.85X19.3X1.27-MM THK) | ||
| 129-5427 | [2] | WASHER-SPECIAL (SEALING) | ||
| 129-5428 | [14] | STUD (BRAKE) | ||
| 334-6832 | [2] | STUD-SPECIAL (BRAKE) | ||
| 335-7766 | [1] | PLATE | ||
| 4. | 438-1719 | [1] | HOUSING AS-FRONT | |
| 3E-8044 | [1] | STUD (1/2-13X2.95-IN) | ||
| 8M-1047 | [1] | STUD-TAPERLOCK (3/8-16X1.67-IN) | ||
| 437-2698 | [1] | HOUSING-FRONT | ||
| 5. | 0L-2070 | [1] | BOLT (3/8-16X2.25-IN) | |
| 6. | 5M-2894 | [11] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 7. | 5P-4255 | [8] | BOLT-LOCKING (3/8-16X1-IN) | |
| 8. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 9. | 9S-8752 | [1] | NUT-FULL (3/8-16-THD) |
#SEBP55690164
353-2788: HOUSING GP-FRONT
353-2788 HOUSING GP-FRONT
PROVIDES ALUMINUM FRONT HOUSING
FOR USE WITH RADIAL SLEEP TIMING SENSOR
CANNOT BE USED WITH ACCESSORY DRIVE THAT REQUIRES OIL DRAIN BACK
AN ATTACHMENT
PROVIDES ALUMINUM FRONT HOUSING
FOR USE WITH RADIAL SLEEP TIMING SENSOR
CANNOT BE USED WITH ACCESSORY DRIVE THAT REQUIRES OIL DRAIN BACK
AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 155-9524 | [1] | SEAL-INTEGRAL | |
| 2. | 166-9144 | [1] | GASKET | |
| 3. | 353-2594 | [1] | PLATE AS-FRONT HOUSING | |
| 126-1757 | [11] | WASHER (10.85X19.3X1.27-MM THK) | ||
| 129-5427 | [2] | WASHER-SPECIAL (SEALING) | ||
| 129-5428 | [14] | STUD (BRAKE) | ||
| 334-6832 | [2] | STUD-SPECIAL (BRAKE) | ||
| 335-7766 | [1] | PLATE | ||
| 4. | 353-2621 | [1] | HOUSING AS-FRONT | |
| 3E-8044 | [1] | STUD (1/2-13X2.95-IN) | ||
| 8M-1047 | [1] | STUD-TAPERLOCK (3/8-16X1.67-IN) | ||
| 355-6100 | [1] | HOUSING-FRONT | ||
| 5. | 0L-2070 | [1] | BOLT (3/8-16X2.25-IN) | |
| 6. | 5M-2894 | [11] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 7. | 5P-4255 | [8] | BOLT-LOCKING (3/8-16X1-IN) | |
| 8. | 6V-8801 | [2] | NUT (3/8-16-THD) |
#SEBP55690165
353-2789: HOUSING GP-FRONT
353-2789 HOUSING GP-FRONT
TO PROVIDE A TIER IV FRONT HOUSING GROUP WITH AN ALUMINUM FRONT HOUSING
FOR USE WITH RADIAL SPEED TIMING SENSOR
AN ATTACHMENT
TO PROVIDE A TIER IV FRONT HOUSING GROUP WITH AN ALUMINUM FRONT HOUSING
FOR USE WITH RADIAL SPEED TIMING SENSOR
AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 155-9524 | [1] | SEAL-INTEGRAL | |
| 2. | 166-9144 | [1] | GASKET | |
| 3. | 353-2620 Y | [1] | PLATE AS-FRONT HOUSING | |
| 4. | 353-2621 | [1] | HOUSING AS-FRONT | |
| 3E-8044 | [1] | STUD (1/2-13X2.95-IN) | ||
| 8M-1047 | [1] | STUD-TAPERLOCK (3/8-16X1.67-IN) | ||
| 355-6100 | [1] | HOUSING-FRONT | ||
| 5. | 0L-2070 | [1] | BOLT (3/8-16X2.25-IN) | |
| 6. | 5M-2894 | [11] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 7. | 5P-4255 | [8] | BOLT-LOCKING (3/8-16X1-IN) | |
| 8. | 9S-8752 | [2] | NUT-FULL (3/8-16-THD) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP55690166
355-6093: HOUSING GP-FRONT
355-6093 HOUSING GP-FRONT
Type 1
FOR USE WITH LOAD LIMITING IDLER
CANNOT BE USED WITH ACCESSORY DRIVE THAT REQUIRES OIL DRAIN BACK
AN ATTACHMENT
Type 1
FOR USE WITH LOAD LIMITING IDLER
CANNOT BE USED WITH ACCESSORY DRIVE THAT REQUIRES OIL DRAIN BACK
AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 155-9524 | [1] | SEAL-INTEGRAL | |
| 2. | 166-9144 | [1] | GASKET | |
| 3. | 353-2595 | [1] | HOUSING AS-FRONT | |
| 3E-8044 | [1] | STUD (1/2-13X2.95-IN) | ||
| 8M-1047 | [1] | STUD-TAPERLOCK (3/8-16X1.67-IN) | ||
| 355-6099 | [1] | HOUSING-FRONT | ||
| 4. | 360-0790 | [1] | PLATE AS | |
| 126-1757 | [10] | WASHER (10.85X19.3X1.27-MM THK) | ||
| 129-5427 | [2] | WASHER-SPECIAL (SEALING) | ||
| 129-5428 | [9] | STUD (BRAKE) | ||
| 334-6832 | [2] | STUD-SPECIAL (BRAKE) | ||
| 5. | 0L-2070 | [1] | BOLT (3/8-16X2.25-IN) | |
| 6. | 5M-2894 | [11] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 7. | 5P-4255 | [8] | BOLT-LOCKING (3/8-16X1-IN) | |
| 8. | 9S-8752 | [2] | NUT-FULL (3/8-16-THD) |
#SEBP55690167
355-6093: HOUSING GP-FRONT
355-6093 HOUSING GP-FRONT
Type 2
FOR USE WITH LOAD LIMITING IDLER
CANNOT BE USED WITH ACCESSORY DRIVE THAT REQUIRES OIL DRAIN BACK
AN ATTACHMENT
Type 2
FOR USE WITH LOAD LIMITING IDLER
CANNOT BE USED WITH ACCESSORY DRIVE THAT REQUIRES OIL DRAIN BACK
AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 155-9524 | [1] | SEAL-INTEGRAL | |
| 2. | 166-9144 | [1] | GASKET | |
| 3. | 438-1719 C | [1] | HOUSING AS-FRONT | |
| 3E-8044 | [1] | STUD (1/2-13X2.95-IN) | ||
| 8M-1047 | [1] | STUD-TAPERLOCK (3/8-16X1.67-IN) | ||
| 437-2698 | [1] | HOUSING-FRONT | ||
| 4. | 360-0790 | [1] | PLATE AS | |
| 126-1757 | [10] | WASHER (10.85X19.3X1.27-MM THK) | ||
| 129-5427 | [2] | WASHER-SPECIAL (SEALING) | ||
| 129-5428 | [9] | STUD (BRAKE) | ||
| 334-6832 | [2] | STUD-SPECIAL (BRAKE) | ||
| 5. | 0L-2070 | [1] | BOLT (3/8-16X2.25-IN) | |
| 6. | 5M-2894 | [11] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 7. | 5P-4255 | [8] | BOLT-LOCKING (3/8-16X1-IN) | |
| 8. | 9S-8752 | [2] | NUT-FULL (3/8-16-THD) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP55690168
381-8115: KIT-ADAPTER
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 327-0283 | [1] | SEAL-INTEGRAL (3/4-IN) | |
| (KIT ALSO INCLUDES AIR COMPRESSOR ADAPTER HEAD) | ||||
#SEBP55690169
381-8116: KIT-ADAPTER
381-8116 KIT-ADAPTER -AIR COMPRESSOR
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 327-0282 | [1] | SEAL-INTEGRAL (1/2-IN) | |
| (KIT ALSO INCLUDES AIR COMPRESSOR ADAPTER HEAD) | ||||
Information:
BASIC ENGINE
HOUSING GP-FLYWHEEL
Specifications
Testing and Adjusting
Disassembly and Assembly
