AIR INLET AND EXHAUST SYSTEM
AFTERTREATMENT GPTURBOCHARGER GP
LINES GP-AIR
MANIFOLD GP-INLET
AFTERTREATMENT GP
AIR INLET AND EXHAUST SYSTEM
AFTERTREATMENT GP#SEBP55730650
396-8133: LINES GP-EXHAUST COMBUSTION
396-8133 LINES GP-EXHAUST COMBUSTION
24 VOLT. COMBUSTION
24 VOLT. COMBUSTION
Parts for your C7.1 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5239 | [1] | RELAY AS (24-VOLT) | |
| 2. | 6I-0217 M | [4] | BOLT (M8X1.25X20-MM) | |
| 3. | 6I-0654 M | [1] | BOLT (M10X1.5X25-MM) | |
| 4. | 100-4830 M | [1] | BOLT (M10X1.5X20-MM) | |
| 5. | 101-3917 | [1] | WASHER (10.5X21X2-MM THK) | |
| 6. | 334-8571 | [3] | CLIP-PIPE | |
| 7. | 353-5441 | [1] | ADAPTER-ELBOW | |
| 8. | 356-3986 | [3] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 277-4993 | [1] | SEAL-O-RING | ||
| 9. | 359-8935 | [1] | HOSE | |
| 10. | 359-9198 | [1] | CLIP-PIPE | |
| 11. | 360-2358 | [1] | ADAPTER | |
| 12. | 360-3453 | [1] | HOSE AS | |
| 13. | 361-5097 Y | [1] | PUMP GP-FUEL (24-VOLT, ARD) | |
| 14. | 364-3488 | [1] | HOSE AS | |
| 359-7115 | [2] | CONNECTOR-FUEL | ||
| 15. | I | [2] | HOSE AS | |
| 16. | 366-7716 | [1] | HOSE | |
| 17. | 366-7731 | [1] | BRACKET | |
| 18. | 369-7328 | [3] | SPACER-SPECIAL | |
| 19. | 377-5921 | [1] | TUBE AS | |
| 20. | 378-8423 | [1] | BRACKET | |
| 21. | 390-9491 | [2] | CLIP | |
| 22. | 394-6062 | [1] | HOSE AS | |
| 23. | 6V-7744 M | [1] | LOCKNUT (M10X1.5-THD) | |
| 24. | 106-8916 M | [1] | BOLT (M6X16-MM) | |
| 25. | 148-8316 | [1] | CONNECTOR AS | |
| 3J-7354 | [1] | SEAL-O-RING | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 6V-8647 | [1] | CONNECTOR | ||
| 26. | 148-8336 | [1] | CONNECTOR AS | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6V-8636 | [1] | CONNECTOR | ||
| 27. | 148-8369 | [1] | ELBOW AS | |
| 3J-7354 | [1] | SEAL-O-RING | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 6V-8628 | [1] | ELBOW | ||
| 28. | 148-8385 | [1] | ELBOW AS | |
| 3J-7354 | [1] | SEAL-O-RING | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 6V-9000 | [1] | ELBOW | ||
| 29. | 346-7484 | [1] | SEAL-O-RING | |
| 30. | 3K-0360 | [3] | SEAL-O-RING | |
| 31. | 4J-5477 | [1] | SEAL-O-RING | |
| 32. | 6I-0455 M | [3] | BOLT (M8X1.25X55-MM) | |
| 33. | 6V-9027 | [1] | SEAL-O-RING | |
| 34. | 8T-6703 | [4] | CLAMP-HOSE | |
| 35. | 8T-7487 | [1] | CONNECTOR | |
| 36. | 9S-4185 | [2] | PLUG (3/4-16-THD) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP55730651
374-0185: LINES GP-TURBOCHARGER
374-0185 LINES GP-TURBOCHARGER
PART OF 375-3166, 375-3167 TURBOCHARGER GP
PART OF 375-3166, 375-3167 TURBOCHARGER GP
#SEBP55730652
358-4275: LINES GP-TURBOCHARGER AIR
358-4275 LINES GP-TURBOCHARGER AIR
PART OF 373-9314 TURBOCHARGER GP
PART OF 373-9314 TURBOCHARGER GP
Parts for your C7.1 INDUSTRIAL ENGINE:
CATERPILLAR SIS#SEBP55730653
358-4277: LINES GP-TURBOCHARGER AIR
358-4277 LINES GP-TURBOCHARGER AIR
PART OF 373-9314 TURBOCHARGER GP
PART OF 373-9314 TURBOCHARGER GP
Parts for your C7.1 INDUSTRIAL ENGINE:
CATERPILLAR SIS#SEBP55730654
360-1965: LINES GP-TURBOCHARGER AIR
360-1965 LINES GP-TURBOCHARGER AIR
PART OF 355-1038, 355-1040, 355-1041 TURBOCHARGER GP
PART OF 355-1038, 355-1040, 355-1041 TURBOCHARGER GP
#SEBP55730655
365-9909: LINES GP-TURBOCHARGER AIR
365-9909 LINES GP-TURBOCHARGER AIR
PART OF 355-1038, 355-1040, 355-1041, 375-3166, 375-3167 TURBOCHARGER GP
PART OF 355-1038, 355-1040, 355-1041, 375-3166, 375-3167 TURBOCHARGER GP
#SEBP55730656
377-2877: LINES GP-TURBOCHARGER AIR
377-2877 LINES GP-TURBOCHARGER AIR
PART OF 416-6969, 431-6518 TURBOCHARGER GP
PART OF 416-6969, 431-6518 TURBOCHARGER GP
#SEBP55730657
396-9532: LINES GP-TURBOCHARGER AIR
396-9532 LINES GP-TURBOCHARGER AIR
PART OF 416-6971 TURBOCHARGER GP
PART OF 416-6971 TURBOCHARGER GP
#SEBP55730658
377-2854: MANIFOLD & VALVE GP
377-2854 MANIFOLD & VALVE GP
PART OF 378-3539, 378-3542 ELBOW GP-AIR INLET
PART OF 378-3539, 378-3542 ELBOW GP-AIR INLET
#SEBP55730659
389-2651: MANIFOLD GP-DEF
Parts for your C7.1 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 384-0801 | [1] | PLATE | |
| 2. | 390-1145 | [1] | MANIFOLD AS | |
| 2A. | 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 2B. | 230-4014 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | |
| 2C. | 425-0385 | [1] | FILTER AS (DIESEL EXHAUST FLUID) | |
| 3. | 391-5262 | [1] | GASKET | |
| 4. | 422-8423 M | [6] | SCREW-TRUSS HEAD (M5X0.8X25-MM) | |
| M | METRIC PART | |||
Information:
AIR INLET AND EXHAUST SYSTEM
AFTERTREATMENT GP
Engine News
Exhaust Gas Valve (NRS) for C7.1, C6.6, andC4.4 Engines {1050, 108N}
Exhaust Gas Valve (NRS) for C7.1, C6.6, andC4.4 Engines {1050, 108N}
Exhaust Gas Valve (NRS) for C7.1, C6.6, andC4.4 Engines {1050, 108N}
New Diesel Exhaust Fluid Pump Connector is Now Used on Certain C7.1 - C18 Engine Applications {108J}
New Diesel Exhaust Fluid Pump Connector is Now Used on Certain C7.1 - C18 Engine Applications {108J}
New Diesel Exhaust Fluid Pump Connector is Now Used on Certain C7.1 - C18 Engine Applications {108J}
Operation and Maintenance Manual
Special Instruction
Replacement of the Aftertreatment Regeneration Device (ARD) Combustion Head on Caterpillar Products with Clean Emissions Modules {108B, 108M}
Replacement of the Aftertreatment Regeneration Device (ARD) Combustion Head on Caterpillar Products with Clean Emissions Modules {108B, 108M}
Replacement of the Aftertreatment Regeneration Device (ARD) Combustion Head on Caterpillar Products with Clean Emissions Modules {108B, 108M}
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}
Additional Procedure when Replacing the Engine, ECM, or CEM Tier 4 Engines{1000, 108D, 108F, 1901}
Additional Procedure when Replacing the Engine, ECM, or CEM Tier 4 Engines{1000, 108D, 108F, 1901}
Additional Procedure when Replacing the Engine, ECM, or CEM Tier 4 Engines{1000, 108D, 108F, 1901}
Aftertreatment Regeneration Device (ARD) Heater Wire Failures on Tier 4 Interim Engines{1088, 108B, 108E, 108M}
Aftertreatment Regeneration Device (ARD) Heater Wire Failures on Tier 4 Interim Engines{1088, 108B, 108E, 108M}
Aftertreatment Regeneration Device (ARD) Heater Wire Failures on Tier 4 Interim Engines{1088, 108B, 108E, 108M}
Testing the Diesel Particulate Filter (DPF) for Cracks and Leaks for C7.1 Engines{108F}
Testing the Diesel Particulate Filter (DPF) for Cracks and Leaks for C7.1 Engines{108F}
Testing the Diesel Particulate Filter (DPF) for Cracks and Leaks for C7.1 Engines{108F}
Diagnostic Supplement for the Cat<SUP>®</SUP> Regeneration System For Machines Powered by C7.1, C9.3, C13, C15, and C18 Engines {108D, 108U}
Diagnostic Supplement for the Cat® Regeneration System For Machines Powered by C7.1, C9.3, C13, C15, and C18 Engines {108D, 108U}
Diagnostic Supplement for the Cat® Regeneration System For Machines Powered by C7.1, C9.3, C13, C15, and C18 Engines {108D, 108U}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST COOLER (NRS) ON CERTAIN C7.1 INDUSTRIAL ENGINES AND GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST COOLER (NRS) ON CERTAIN C7.1 INDUSTRIAL ENGINES AND GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST COOLER (NRS) ON CERTAIN C7.1 INDUSTRIAL ENGINES AND GENERATOR SETS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Technical Information Bulletin
Diesel Particulate Filter Regeneration on C7.1 Engines{108F}
Diesel Particulate Filter Regeneration on C7.1 Engines{108F}
Diesel Particulate Filter Regeneration on C7.1 Engines{108F}
Failure of Temperature Sensor Gp in Clean Emissions Module on certain Cat<SUP>®</SUP> Products{108D, 1408, 1919}
Failure of Temperature Sensor Gp in Clean Emissions Module on certain Cat® Products{108D, 1408, 1919}
Failure of Temperature Sensor Gp in Clean Emissions Module on certain Cat® Products{108D, 1408, 1919}
Aftertreatment Regeneration Device (ARD) Heater Wire Failures on Tier 4 Interim Engines{1088, 108B, 108E, 108M}
Aftertreatment Regeneration Device (ARD) Heater Wire Failures on Tier 4 Interim Engines{1088, 108B, 108E, 108M}
Aftertreatment Regeneration Device (ARD) Heater Wire Failures on Tier 4 Interim Engines{1088, 108B, 108E, 108M}
A New Form is Required When Returning a CRS Head for all Tier 4 Interim and Final Engines {0374, 108U}
A New Form is Required When Returning a CRS Head for all Tier 4 Interim and Final Engines {0374, 108U}
A New Form is Required When Returning a CRS Head for all Tier 4 Interim and Final Engines {0374, 108U}
Soot Sensor on Certain C4.4 and C7.1 Engines {108D, 108F, 108U}
Soot Sensor on Certain C4.4 and C7.1 Engines {108D, 108F, 108U}
Soot Sensor on Certain C4.4 and C7.1 Engines {108D, 108F, 108U}
Specifications
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST COOLER (NRS) ON CERTAIN C7.1 INDUSTRIAL ENGINES AND GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST COOLER (NRS) ON CERTAIN C7.1 INDUSTRIAL ENGINES AND GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST COOLER (NRS) ON CERTAIN C7.1 INDUSTRIAL ENGINES AND GENERATOR SETS
Service Letter-Asia
Systems Operation
Information Release Memo
REMAN DIESEL PARTICULATE FILTERS FOR MACHINE APPLICATIONS
REMAN DIESEL PARTICULATE FILTERS FOR MACHINE APPLICATIONS
REMAN DIESEL PARTICULATE FILTERS FOR MACHINE APPLICATIONS
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST COOLER (NRS) ON CERTAIN C7.1 INDUSTRIAL ENGINES AND GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST COOLER (NRS) ON CERTAIN C7.1 INDUSTRIAL ENGINES AND GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST COOLER (NRS) ON CERTAIN C7.1 INDUSTRIAL ENGINES AND GENERATOR SETS
Testing and Adjusting
Troubleshooting
Disassembly and Assembly
Service Magazine