AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3306B Engine Emissions Upgrade Group Retrofit Tier I Equivalent Level for 3306B Industrial,D350C/D,D300B/D, D30C/D,D25C,D35C,and D25D Articulated Dump Truck 1HK00001-UP (MACHINE) BASIC ENGINE Caterpillar SIS



ARTICULATED TRUCK D25D ARTICULATED TRUCK 1HK
 3306B Engine Emissions Upgrade Group Retrofit Tier I Equivalent Level for 3306B Industrial,D350C/D,D300B/D, D30C/D,D25C,D35C,and D25D Articulated Dump Truck 1HK00001-UP (MACHINE) SEBP5591 D25D 1HK   (1989)

Parts group D25D:

  For full view, you need register
BASIC ENGINE
CAMSHAFT GP
140-0044 KIT-BEARING
140-0044 KIT-BEARING
S/N 4SD1-UP; 9RF1-UP; 5MG1-UP; 3AJ1-UP; 1HK1-UP
DRIVE TRAIN BEARING KIT
FIELD INSTALLATION
PARTS GP-MISCELLANEOUS
284-7811 KIT-HARDWARE
284-7811 KIT-HARDWARE
PART OF 284-3299 KIT-ENGINE PARTS
FOR USE WITH REHS2923,2924,2925,2920,2724,2726,2927,2781,2922 3306 EMISSIONS UPGRADE GROUP RETROFIT, TO TIER I EQUIVALENT LEVEL FOR 65/65B/65C CHALLENGER TRACTOR, D7H TRACTOR, 637E SCRAPER, 637E SERIES II SCRAPER, 637D SCRAPER, D25C, D25D, D30C, D30D, D35C, D300B, D350C, D350D ARTICULATED DUMP TRUCK, FOR 970F WHEEL LOADER - ELECTRIC SHIFT, (7SK)T658- 08Z1-UP, 6NC1-UP, 13Z1-UP, (7YC)T466- 08Z1-UP, (2ZJ)T656- 08Z1-UP, (2ZJ)T741- 08Z1-UP, (64Z1-UP)E282-, (2GD)RM441- 13Z1-UP, (8XC)RM443- 13Z1-UP, (4SD)RM448- 13Z1-UP , (7ZC)RM449- 13Z-UP, (9YC)RM450- 13Z1-UP, (1HK)RM472- 13Z1-UP, (9RF)RM476- 13Z1-UP, (3AJ)RM477- 13Z1-UP, (5MG)RM473- 13Z1-UP, (79Z)T356- 08Z1-UP, (80Z)T357- 08Z1-UP, (4FG)T431- 08Z1-UP, (5BF)T414- 08Z1-UP, (1HB)RM407- 6NC1-UP, 08Z1-UP, (1LB)RM410- 6NC1-UP, 08Z1-UP, (7CB)RM434- 6NC1-UP, 08Z1-UP, (21W)RM361- 08Z1-UP,6NC1-UP, (4JB)RM432- 08Z1-UP,6NC1-UP, (20W)RM360- 08Z1-UP,6NC1-UP , (23W)RM372- 08Z1-UP,6NC1-UP, (22W)RM362- 08Z1-UP,6NC1-UP, FOR 330 EXCAVATORS, (9WJ)X194- 08Z1-UP,6NC1-UP,13Z1-UP, (8FK)X195- 08Z1-UP,6NC1-UP,13Z1-UP, 7W-4152, 4P-4976, 4P-9295, 6I-4087, 2W-1557, 7C-7046, 9Y-8274, 6I-2098, 6I-2100, 1W-3231 , 1W-1346, 6I-2027, 106-5531,9Y-4134,9Y-4133 ENGINE ARRANGEMENTS
284-3299 KIT-ENGINE PARTS
284-3299 KIT-ENGINE PARTS
PART OF 284-3287 CONVERSION AR-ENGINE
FOR USE WITH REHS2920, 3306 EMISSIONS UPGRADE GROUP RETROFIT TO TIER I EQUIVALENT LEVEL, FOR D25C, D25D, D30C, D30D, D35C, D300B, D350C, D350D ARTICULATED TRUCK & 3306 INDUSTRIAL, (64Z1-UP)E282-, (2GD)RM441- 13Z1-UP, (8XC)RM443- 13Z1-UP, (4SD)RM448- 13Z1-UP, (7ZC)RM449- 13Z1-UP, (9YC)RM450- 13Z1-UP, (1HK)RM472- 13Z1-UP, (9RF)RM476- 13Z1-UP, (3AJ)RM477- 13Z1-UP, (5MG)RM473- 13Z1-UP, 2W-1557, 7C-7046, & 9Y-8274 ENGINE ARRANGEMENTS

Information:

(For parts list, see above)

Truck Engine News
A New Special Instruction , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/01
Engine News
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/01
Special Instruction
Air Compressor Installation Instructions{1803}
Air Compressor Installation Instructions{1803}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Specifications
Compressor
D25D, D30D AND D350D ARTICULATED TRUCKS AIR SYSTEM & BRAKES
Disassembly and Assembly
Air Compressor
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Air Compressor Governor
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Air Compressor Governor (Bendix)
D25D,D30D AND D350D ARTICULATED DUMP TRUCKS VEHICLE SYSTEMS
Air Compressor - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Alternative Air Pressure Test Point{1804}
1989/12/25
Improved Air Line Routing Reduces Air Dryer Service {4285,1803}
1990/02/26
A New Special Instruction, REHS1428 , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/23
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/15
A New Governor Valve Is Available for the Air Compressor {1803}
2004/09/20
Disassembly and Assembly
Engine Balancer Shaft - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Engine Balancer Shaft Bearings - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Special Instruction
Jake Brake Part Number Cross-Reference To Caterpillar Part Numbers{1119}
Jake Brake Part Number Cross-Reference To Caterpillar Part Numbers{1119}
Field Installation Of 3Z-5855 Jake Brake Modification {1119, 1129, 7314}
Field Installation Of 3Z-5855 Jake Brake Modification {1119, 1129, 7314}
Disassembly and Assembly
Compression Brake - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Compression Brake - Install
3304B and 3306B Engines for Caterpillar Built Machines
Compression Brake - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines
Compression Brake - Assemble
3304B and 3306B Engines for Caterpillar Built Machines
Special Instruction
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Service Letter-NACD
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Service Letter-APD
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Disassembly and Assembly
Camshaft
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Camshaft Bearings
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Camshaft - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11
New Camshaft Has Improved Wear Resistance{1210,1209}
1990/11/19
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Service Replacement Thrust Plates{1203}
Installation Of Service Replacement Thrust Plates{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Disassembly and Assembly
Crankshaft Front Seal And Wear Sleeve
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Crankshaft Main Bearings
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Crankshaft Rear Seal And Wear Sleeve
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Crankshaft
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Bearing Clearance - Check
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Front Seal - Install
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft - Install
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Install
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
New Crankshaft Thrust Plate{1203}
1984/01/09
New Connecting Rod And Main Bearings Used{1230,1219,1203}
1984/03/26
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
Tools To Install Crankshaft Seal And Wear Sleeve{1160,1161,0622}
1977/07/11
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Double Lip Seal With Hydrodynamic Grooves Used At Rear Of Crankshaft {1161,1200}
1987/09/28
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines{1161}
1979/03/26
Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed{7555,7558,1161}
1979/06/04
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
New Front Crankshaft Seal Used{1160,1202}
1991/02/18
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
A New Type of Main Bearing is Available {1203}
2004/09/27
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Procedure for Crankshafts that will not Rotate after Installation during a Rebuild {1000, 1202}
2008/09/08
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
Installation Of 2P8774 And 2P8776 Cylinder Block Assemblies{1201}
Installation Of 2P8774 And 2P8776 Cylinder Block Assemblies{1201}
Installation Of Service Replacement Thrust Plates{1203}
Installation Of Service Replacement Thrust Plates{1203}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 2W3422 Flywheel Housing As The Service Replacement For 8N5013 Flywheel Housing{1157}
Installation Of 2W3422 Flywheel Housing As The Service Replacement For 8N5013 Flywheel Housing{1157}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Installation Of 0R2554 Remanufactured Short Block Group{1200}
Installation Of 0R2554 Remanufactured Short Block Group{1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Service Letter-NACD
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Remanufactured Cylinder Packs Contain Improperly Installed Piston Rings for Certain Caterpillar Products{1215, 1239}
Remanufactured Cylinder Packs Contain Improperly Installed Piston Rings for Certain Caterpillar Products{1215, 1239}
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Service Letter-China
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Letter-APD
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Disassembly and Assembly
Spacer Plate
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Cylinder Liners
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Crankshaft Main Bearings
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Camshaft Bearings
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Crankshaft
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Cylinder Liner - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Bearing Clearance - Check
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3304B and 3306B Engines for Caterpillar Built Machines
Spacer Plate - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Cylinder Liner - Install
3304B and 3306B Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
New Crankshaft Thrust Plate{1203}
1984/01/09
New Connecting Rod And Main Bearings Used{1230,1219,1203}
1984/03/26
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Cylinder Head Water Directors No Longer Needed In Direct Injection Engines {1115}
1987/03/09
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Pin Bore Is Now Offset (Not In The Center) .059&quot; (1.5 mm) In The Piston To Stop Vibration Of The Cylinder Liners Which Can Cause Pitting On The Coolant Side Of The Cylinder Liners {1214,1216}
1979/09/10
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Use Only Stainless Steel Cylinder Liner Shims To Salvage Damaged 4.75&quot; Bore Cylinder Blocks{1201,1216,1217}
1990/11/19
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
Be Sure To Use Correct Cup Plugs On 0R2077, 0R2554, And 0R3258 Remanufactured Short Blocks{1200,1201}
1992/11/23
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Special Instruction
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
Product Support Program For Cylinder Head Gasket Failures On Certain D6D, D6H, D7G, And D7H Tractors; 12G, 14G, And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966D And 966E Loaders; And 973 Loaders
Product Support Program For Cylinder Head Gasket Failures On Certain D6D, D6H, D7G, And D7H Tractors; 12G, 14G, And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966D And 966E Loaders; And 973 Loaders
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
PRODUCT SUPPORT FOR REPLACING THE CYLINDER HEAD GASKET ON CERTAIN 3306 ENGINES INSTALLED IN D25D, D30D, D250E, D300E, D250EII, D300EII ARTICULATED TRUCKS; AND IN 970F, 966F2, 966G, 972G WHEEL LOADERS
PRODUCT SUPPORT FOR REPLACING THE CYLINDER HEAD GASKET ON CERTAIN 3306 ENGINES INSTALLED IN D25D, D30D, D250E, D300E, D250EII, D300EII ARTICULATED TRUCKS; AND IN 970F, 966F2, 966G, 972G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND TIGHTENING CYLINDER HEAD BOLTS ON CERTAIN 3306 ENGINES INSTALLED IN D25D, D30D, D250E, D300E ARTICULATED TRUCKS; AND IN 970F, 966F II, 966G, 972G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND TIGHTENING CYLINDER HEAD BOLTS ON CERTAIN 3306 ENGINES INSTALLED IN D25D, D30D, D250E, D300E ARTICULATED TRUCKS; AND IN 970F, 966F II, 966G, 972G WHEEL LOADERS
Service Letter-Australia
Product Support Program For Cylinder Head Gasket Failures On Certain D6D, D6H, D7G, And D7H Tractors; 12G, 14G, And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966D And 966E Loaders; And 973 Loaders
Product Support Program For Cylinder Head Gasket Failures On Certain D6D, D6H, D7G, And D7H Tractors; 12G, 14G, And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966D And 966E Loaders; And 973 Loaders
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
PRODUCT SUPPORT FOR REPLACING THE CYLINDER HEAD GASKET ON CERTAIN 3306 ENGINES INSTALLED IN D25D, D30D, D250E, D300E, D250EII, D300EII ARTICULATED TRUCKS; AND IN 970F, 966F2, 966G, 972G WHEEL LOADERS
PRODUCT SUPPORT FOR REPLACING THE CYLINDER HEAD GASKET ON CERTAIN 3306 ENGINES INSTALLED IN D25D, D30D, D250E, D300E, D250EII, D300EII ARTICULATED TRUCKS; AND IN 970F, 966F2, 966G, 972G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND TIGHTENING CYLINDER HEAD BOLTS ON CERTAIN 3306 ENGINES INSTALLED IN D25D, D30D, D250E, D300E ARTICULATED TRUCKS; AND IN 970F, 966F II, 966G, 972G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND TIGHTENING CYLINDER HEAD BOLTS ON CERTAIN 3306 ENGINES INSTALLED IN D25D, D30D, D250E, D300E ARTICULATED TRUCKS; AND IN 970F, 966F II, 966G, 972G WHEEL LOADERS
Service Letter-CFEL
Product Support Program For Cylinder Head Gasket Failures On Certain D6D, D6H, D7G, And D7H Tractors; 12G, 14G, And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966D And 966E Loaders; And 973 Loaders
Product Support Program For Cylinder Head Gasket Failures On Certain D6D, D6H, D7G, And D7H Tractors; 12G, 14G, And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966D And 966E Loaders; And 973 Loaders
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
PRODUCT SUPPORT FOR REPLACING THE CYLINDER HEAD GASKET ON CERTAIN 3306 ENGINES INSTALLED IN D25D, D30D, D250E, D300E, D250EII, D300EII ARTICULATED TRUCKS; AND IN 970F, 966F2, 966G, 972G WHEEL LOADERS
PRODUCT SUPPORT FOR REPLACING THE CYLINDER HEAD GASKET ON CERTAIN 3306 ENGINES INSTALLED IN D25D, D30D, D250E, D300E, D250EII, D300EII ARTICULATED TRUCKS; AND IN 970F, 966F2, 966G, 972G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND TIGHTENING CYLINDER HEAD BOLTS ON CERTAIN 3306 ENGINES INSTALLED IN D25D, D30D, D250E, D300E ARTICULATED TRUCKS; AND IN 970F, 966F II, 966G, 972G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND TIGHTENING CYLINDER HEAD BOLTS ON CERTAIN 3306 ENGINES INSTALLED IN D25D, D30D, D250E, D300E ARTICULATED TRUCKS; AND IN 970F, 966F II, 966G, 972G WHEEL LOADERS
Service Letter-CSARL
Product Support Program For Cylinder Head Gasket Failures On Certain D6D, D6H, D7G, And D7H Tractors; 12G, 14G, And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966D And 966E Loaders; And 973 Loaders
Product Support Program For Cylinder Head Gasket Failures On Certain D6D, D6H, D7G, And D7H Tractors; 12G, 14G, And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966D And 966E Loaders; And 973 Loaders
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
PRODUCT SUPPORT FOR REPLACING THE CYLINDER HEAD GASKET ON CERTAIN 3306 ENGINES INSTALLED IN D25D, D30D, D250E, D300E, D250EII, D300EII ARTICULATED TRUCKS; AND IN 970F, 966F2, 966G, 972G WHEEL LOADERS
PRODUCT SUPPORT FOR REPLACING THE CYLINDER HEAD GASKET ON CERTAIN 3306 ENGINES INSTALLED IN D25D, D30D, D250E, D300E, D250EII, D300EII ARTICULATED TRUCKS; AND IN 970F, 966F2, 966G, 972G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND TIGHTENING CYLINDER HEAD BOLTS ON CERTAIN 3306 ENGINES INSTALLED IN D25D, D30D, D250E, D300E ARTICULATED TRUCKS; AND IN 970F, 966F II, 966G, 972G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND TIGHTENING CYLINDER HEAD BOLTS ON CERTAIN 3306 ENGINES INSTALLED IN D25D, D30D, D250E, D300E ARTICULATED TRUCKS; AND IN 970F, 966F II, 966G, 972G WHEEL LOADERS
Service Letter-Americas
Product Support Program For Cylinder Head Gasket Failures On Certain D6D, D6H, D7G, And D7H Tractors; 12G, 14G, And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966D And 966E Loaders; And 973 Loaders
Product Support Program For Cylinder Head Gasket Failures On Certain D6D, D6H, D7G, And D7H Tractors; 12G, 14G, And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966D And 966E Loaders; And 973 Loaders
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
PRODUCT SUPPORT FOR REPLACING THE CYLINDER HEAD GASKET ON CERTAIN 3306 ENGINES INSTALLED IN D25D, D30D, D250E, D300E, D250EII, D300EII ARTICULATED TRUCKS; AND IN 970F, 966F2, 966G, 972G WHEEL LOADERS
PRODUCT SUPPORT FOR REPLACING THE CYLINDER HEAD GASKET ON CERTAIN 3306 ENGINES INSTALLED IN D25D, D30D, D250E, D300E, D250EII, D300EII ARTICULATED TRUCKS; AND IN 970F, 966F2, 966G, 972G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND TIGHTENING CYLINDER HEAD BOLTS ON CERTAIN 3306 ENGINES INSTALLED IN D25D, D30D, D250E, D300E ARTICULATED TRUCKS; AND IN 970F, 966F II, 966G, 972G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND TIGHTENING CYLINDER HEAD BOLTS ON CERTAIN 3306 ENGINES INSTALLED IN D25D, D30D, D250E, D300E ARTICULATED TRUCKS; AND IN 970F, 966F II, 966G, 972G WHEEL LOADERS
Service Letter-Brazil
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Truck/Ag/Marine
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Service Letter-China
Product Support Program For Cylinder Head Gasket Failures On Certain D6D, D6H, D7G, And D7H Tractors; 12G, 14G, And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966D And 966E Loaders; And 973 Loaders
Product Support Program For Cylinder Head Gasket Failures On Certain D6D, D6H, D7G, And D7H Tractors; 12G, 14G, And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966D And 966E Loaders; And 973 Loaders
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
PRODUCT SUPPORT FOR REPLACING THE CYLINDER HEAD GASKET ON CERTAIN 3306 ENGINES INSTALLED IN D25D, D30D, D250E, D300E, D250EII, D300EII ARTICULATED TRUCKS; AND IN 970F, 966F2, 966G, 972G WHEEL LOADERS
PRODUCT SUPPORT FOR REPLACING THE CYLINDER HEAD GASKET ON CERTAIN 3306 ENGINES INSTALLED IN D25D, D30D, D250E, D300E, D250EII, D300EII ARTICULATED TRUCKS; AND IN 970F, 966F2, 966G, 972G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND TIGHTENING CYLINDER HEAD BOLTS ON CERTAIN 3306 ENGINES INSTALLED IN D25D, D30D, D250E, D300E ARTICULATED TRUCKS; AND IN 970F, 966F II, 966G, 972G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND TIGHTENING CYLINDER HEAD BOLTS ON CERTAIN 3306 ENGINES INSTALLED IN D25D, D30D, D250E, D300E ARTICULATED TRUCKS; AND IN 970F, 966F II, 966G, 972G WHEEL LOADERS
Service Letter-Asia
Product Support Program For Cylinder Head Gasket Failures On Certain D6D, D6H, D7G, And D7H Tractors; 12G, 14G, And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966D And 966E Loaders; And 973 Loaders
Product Support Program For Cylinder Head Gasket Failures On Certain D6D, D6H, D7G, And D7H Tractors; 12G, 14G, And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966D And 966E Loaders; And 973 Loaders
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
PRODUCT SUPPORT FOR REPLACING THE CYLINDER HEAD GASKET ON CERTAIN 3306 ENGINES INSTALLED IN D25D, D30D, D250E, D300E, D250EII, D300EII ARTICULATED TRUCKS; AND IN 970F, 966F2, 966G, 972G WHEEL LOADERS
PRODUCT SUPPORT FOR REPLACING THE CYLINDER HEAD GASKET ON CERTAIN 3306 ENGINES INSTALLED IN D25D, D30D, D250E, D300E, D250EII, D300EII ARTICULATED TRUCKS; AND IN 970F, 966F2, 966G, 972G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND TIGHTENING CYLINDER HEAD BOLTS ON CERTAIN 3306 ENGINES INSTALLED IN D25D, D30D, D250E, D300E ARTICULATED TRUCKS; AND IN 970F, 966F II, 966G, 972G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND TIGHTENING CYLINDER HEAD BOLTS ON CERTAIN 3306 ENGINES INSTALLED IN D25D, D30D, D250E, D300E ARTICULATED TRUCKS; AND IN 970F, 966F II, 966G, 972G WHEEL LOADERS
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Service Letter-APD
Product Support Program For Cylinder Head Gasket Failures On Certain D6D, D6H, D7G, And D7H Tractors; 12G, 14G, And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966D And 966E Loaders; And 973 Loaders
Product Support Program For Cylinder Head Gasket Failures On Certain D6D, D6H, D7G, And D7H Tractors; 12G, 14G, And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966D And 966E Loaders; And 973 Loaders
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
PRODUCT SUPPORT FOR REPLACING THE CYLINDER HEAD GASKET ON CERTAIN 3306 ENGINES INSTALLED IN D25D, D30D, D250E, D300E, D250EII, D300EII ARTICULATED TRUCKS; AND IN 970F, 966F2, 966G, 972G WHEEL LOADERS
PRODUCT SUPPORT FOR REPLACING THE CYLINDER HEAD GASKET ON CERTAIN 3306 ENGINES INSTALLED IN D25D, D30D, D250E, D300E, D250EII, D300EII ARTICULATED TRUCKS; AND IN 970F, 966F2, 966G, 972G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND TIGHTENING CYLINDER HEAD BOLTS ON CERTAIN 3306 ENGINES INSTALLED IN D25D, D30D, D250E, D300E ARTICULATED TRUCKS; AND IN 970F, 966F II, 966G, 972G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND TIGHTENING CYLINDER HEAD BOLTS ON CERTAIN 3306 ENGINES INSTALLED IN D25D, D30D, D250E, D300E ARTICULATED TRUCKS; AND IN 970F, 966F II, 966G, 972G WHEEL LOADERS
Disassembly and Assembly
Valve Cover
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Cylinder Head
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Valves
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Valve Seat Inserts
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Water Directors
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Valve Guides
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Inlet and Exhaust Valves - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Cylinder Head - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Cylinder Head - Install
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Use Correct Valves When Rebuilding Engines{1105,1103}
1985/09/02
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Cylinder Head Water Directors No Longer Needed In Direct Injection Engines {1115}
1987/03/09
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Silicone Water Passage Seal Can Be Used Where Contact With Oil Is Unavoidable During Assembly Of Cylinder Heads{1100}
1988/06/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
7S3161 Valve Lifter Has Three Different Designs{1209}
1991/10/14
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
New Valve Guide Available{1104}
1995/12/25
New Valve Cover Seal Used {1107}
1998/05/25
New Cast Iron Valve Guide And New Exhaust Valve With Chrome Plated Stem Will Help Prevent Early Hour Exhaust Valve Sticking In 3304 And 3306 Machine Engines {1104,1105}
1998/06/22
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Later Pre-Chamber Cylinder Heads On Early 3304 Engines Without Drilled Rocker Stands Are Used {1100}
2012/10/11
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Disassembly and Assembly
Vibration Damper And Pulley
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Vibration Damper and Pulley - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
Disassembly and Assembly
Fan Drive
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Service Magazine
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
New Longer Fan Adapter Used On Replacement Engine {1359,1356}
1994/01/31
Special Instruction
Installation of Water Pump Seal Group{1361}
Installation of Water Pump Seal Group{1361}
Installing 3S6610 Water Pump Cage{1361}
Installing 3S6610 Water Pump Cage{1361}
Service Magazine
New Water Pump Oil Seal Prevents Leaks{1361}
1983/10/10
Single Lip Hydrodynamic Seal Used In Water Pumps{1300,1361}
1987/09/21
Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool{1361,0622}
1978/02/13
New Water Pump Gives More Pressure{1361}
1978/09/04
New Remanufactured Water Pump Groups Include Cast Iron Impellers {1361}
1997/01/20
Special Instruction
Installation of Water Pump Seal Group{1361}
Installation of Water Pump Seal Group{1361}
Installing 3S6610 Water Pump Cage{1361}
Installing 3S6610 Water Pump Cage{1361}
Service Magazine
Single Lip Hydrodynamic Seal Used In Water Pumps{1300,1361}
1987/09/21
Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool{1361,0622}
1978/02/13
New Water Pump Gives More Pressure{1361}
1978/09/04
New Remanufactured Water Pump Groups Include Cast Iron Impellers {1361}
1997/01/20
Significant Improvement For Pump Impellers (Water Pumps){1364}
1997/10/27
History Of Pump Impeller (Water Pump) Changes{1364}
1997/10/27
Special Instruction
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Instructions For 3306 PC Engine Tune-Up{1000}
Instructions For 3306 PC Engine Tune-Up{1000}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Analyzing A Major Engine Failure{1000}
1982/07/19
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed{7555,7558,1161}
1979/06/04
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Integral Connector Now Used On The Air Conditioning Condenser Fan Motor Relay Assembly{1408,7320}
1996/04/29
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Special Instruction
Installation Of 2W3422 Flywheel Housing As The Service Replacement For 8N5013 Flywheel Housing{1157}
Installation Of 2W3422 Flywheel Housing As The Service Replacement For 8N5013 Flywheel Housing{1157}
Technical Information Bulletin
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Missing Rear Gear Train Idler Shaft Mounting Bolt Seals May Result In Oil Leaks
Missing Rear Gear Train Idler Shaft Mounting Bolt Seals May Result In Oil Leaks
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Disassembly and Assembly
Flywheel
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Flywheel Housing
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Flywheel - Install
3304B and 3306B Engines for Caterpillar Built Machines
Flywheel - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Engine News
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/14
Technical Information Bulletin
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Missing Rear Gear Train Idler Shaft Mounting Bolt Seals May Result In Oil Leaks
Missing Rear Gear Train Idler Shaft Mounting Bolt Seals May Result In Oil Leaks
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Disassembly and Assembly
Crankshaft Front Seal And Wear Sleeve
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Timing Gear Cover
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Timing Gears And Plate
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Gear Group (Front) - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Gear Group (Front) - Install
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
New Front Housing Assembly And Gaskets Used{1162,1166,1151}
1980/12/01
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
New Front Crankshaft Seal Used{1160,1202}
1991/02/18
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/13
Special Instruction
Installation Of 2W3422 Flywheel Housing As The Service Replacement For 8N5013 Flywheel Housing{1157}
Installation Of 2W3422 Flywheel Housing As The Service Replacement For 8N5013 Flywheel Housing{1157}
Disassembly and Assembly
Flywheel
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Crankshaft Rear Seal And Wear Sleeve
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Flywheel Housing
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Flywheel Housing - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Double Lip Seal With Hydrodynamic Grooves Used At Rear Of Crankshaft {1161,1200}
1987/09/28
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines{1161}
1979/03/26
Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29
New Front Crankshaft Seal Used{1160,1202}
1991/02/18
New Longer Fan Adapter Used On Replacement Engine {1359,1356}
1994/01/31
Technical Information Bulletin
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Disassembly and Assembly
Crankshaft Front Seal And Wear Sleeve
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Timing Gear Cover
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Timing Gears And Plate
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Housing (Front) - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Housing (Front) - Install
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
New Front Housing Assembly And Gaskets Used{1162,1166,1151}
1980/12/01
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
New Front Crankshaft Seal Used{1160,1202}
1991/02/18
Special Instruction
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Service Magazine
6V2050 Tapered Rod Tool Group Available For Removal And Installation Of Bearings{1219,1218,1214}
1980/06/09
New Front Housing Assembly And Gaskets Used{1162,1166,1151}
1980/12/01
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
New Water Pump Oil Seal Prevents Leaks{1361}
1983/10/10
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
New Connecting Rod And Main Bearings Used{1230,1219,1203}
1984/03/26
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Two Different Piston Oil Ring Designs Used{1215}
1985/11/11
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Larger Diameter Holes Are Now Used In The Rocker Arm Shaft To Give More Oil Flow To Rocker Arm Bearings{1102}
1977/11/21
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Single Lip Hydrodynamic Seal Used In Water Pumps{1300,1361}
1987/09/21
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Water Pump Gives More Pressure{1361}
1978/09/04
Silicone Water Passage Seal Can Be Used Where Contact With Oil Is Unavoidable During Assembly Of Cylinder Heads{1100}
1988/06/06
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines{1161}
1979/03/26
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed{7555,7558,1161}
1979/06/04
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
New Rocker Arms And Rocker Arm Shaft Have Improved Lubrication{1102}
1979/08/27
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Alternative Air Pressure Test Point{1804}
1989/12/25
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Use Only Stainless Steel Cylinder Liner Shims To Salvage Damaged 4.75&quot; Bore Cylinder Blocks{1201,1216,1217}
1990/11/19
New Camshaft Has Improved Wear Resistance{1210,1209}
1990/11/19
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
New Front Crankshaft Seal Used{1160,1202}
1991/02/18
7S3161 Valve Lifter Has Three Different Designs{1209}
1991/10/14
Be Sure To Use Correct Cup Plugs On 0R2077, 0R2554, And 0R3258 Remanufactured Short Blocks{1200,1201}
1992/11/23
Technical Information Bulletin
Some 9X-7803 Alternators Were Mislabeled As 8C-6163
Some 9X-7803 Alternators Were Mislabeled As 8C-6163
Service Magazine
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
0R5207 Remanufactured Starter May Not Fit In Some Applications{1453}
1993/11/29
Technical Information Bulletin
3306 Engine Oil Pan Plate Leaks
3306 Engine Oil Pan Plate Leaks
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Disassembly and Assembly
Oil Pan
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Oil Pan Plate
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Engine Oil Pan - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Special Instruction
Use of Piston Pin Bearing Removal and Installation Tools{1218}
Use of Piston Pin Bearing Removal and Installation Tools{1218}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Connecting Rod Bearings
Connecting Rod Bearings
Remanufactured Cylinder Packs Contain Improperly Installed Piston Rings for Certain Caterpillar Products{1215, 1239}
Remanufactured Cylinder Packs Contain Improperly Installed Piston Rings for Certain Caterpillar Products{1215, 1239}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Disassembly and Assembly
Pistons
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Connecting Rod Bearings
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Crankshaft Main Bearings
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Bearing Clearance - Check
3304B and 3306B Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Install
3304B and 3306B Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Assemble
3304B and 3306B Engines for Caterpillar Built Machines
Connecting Rod Bearings - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Connecting Rod Bearings - Install
3304B and 3306B Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
6V2050 Tapered Rod Tool Group Available For Removal And Installation Of Bearings{1219,1218,1214}
1980/06/09
Carbon Cutting On Thrust Side Of Piston Top Land Is Normal Condition For Pistons With Offset (Not In Center) Pin Bores{1213,1214}
1980/08/11
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Connecting Rod Assemblies{1218}
1984/01/23
New Connecting Rod And Main Bearings Used{1230,1219,1203}
1984/03/26
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Two Different Piston Oil Ring Designs Used{1215}
1985/11/11
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Testing Connecting Rod Eye Bushings When Overhauling Engines{1218}
1987/07/06
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Pin Bore Is Now Offset (Not In The Center) .059&quot; (1.5 mm) In The Piston To Stop Vibration Of The Cylinder Liners Which Can Cause Pitting On The Coolant Side Of The Cylinder Liners {1214,1216}
1979/09/10
New Connecting Rod Is Tapered In Piston Pin Area{1218}
1979/10/22
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Oil Control Piston Ring Used In 3300 Family Of Engines {1213,1214,1215}
1990/03/26
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}
1997/01/13
New Guidelines for Inspecting Pistons {1214}
2006/01/02
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
Air Conditioner Compressor
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Fan Drive
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Vibration Damper And Pulley
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Vibration Damper and Pulley - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
New Drip Shield Helps Protect Fan Belts From Oil Splashes{1316,1357}
1990/08/06
New Longer Fan Adapter Used On Replacement Engine {1359,1356}
1994/01/31
Improvements To Air Conditioning Hi-Lo Switch{1435,7320}
1996/01/22
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Bench Test Procedures
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Technical Information Bulletin
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Use of Piston Pin Bearing Removal and Installation Tools{1218}
Use of Piston Pin Bearing Removal and Installation Tools{1218}
Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 4S6553 Engine Evaluation Test Group{0781}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Using the 1U5470 Engine Pressure Group{0781}
Using the 1U5470 Engine Pressure Group{0781}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
6V2050 Tapered Rod Tool Group Available For Removal And Installation Of Bearings{1219,1218,1214}
1980/06/09
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Make Change To 6V2100 Multitach And 5P9698 Calibrator{0651}
1982/11/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17
Troubleshooting The Tachometer System Of The 4S6553 Engine Instrument Group{0651}
1977/10/10
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
6V117 And 6V2001 Bushings Used In 9S8140 Pressurizing Pump Group Are Available For Parts Service{0651}
1979/06/25
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Disassembly and Assembly
Air Conditioner Compressor
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Service Magazine
New Drip Shield Helps Protect Fan Belts From Oil Splashes{1316,1357}
1990/08/06
Truck Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Special Instruction
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Service Letter-NACD
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
Service Letter-China
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Service Letter-APD
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Disassembly and Assembly
Valve Cover
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Rocker Shaft And Push Rods
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Rocker Shaft
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Valve Lifters
3306 VEHICULAR ENGINE FOR 966D WHEEL LOADER
Compression Brake - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Compression Brake - Install
3304B and 3306B Engines for Caterpillar Built Machines
Compression Brake - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines
Compression Brake - Assemble
3304B and 3306B Engines for Caterpillar Built Machines
Rocker Shaft and Pushrod - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Rocker Shaft - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines
Rocker Shaft - Assemble
3304B and 3306B Engines for Caterpillar Built Machines
Lifter Group - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Rocker Shaft and Pushrod - Install
3304B and 3306B Engines for Caterpillar Built Machines
Valve Mechanism Cover - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Larger Diameter Holes Are Now Used In The Rocker Arm Shaft To Give More Oil Flow To Rocker Arm Bearings{1102}
1977/11/21
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Silicone Water Passage Seal Can Be Used Where Contact With Oil Is Unavoidable During Assembly Of Cylinder Heads{1100}
1988/06/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
New Rocker Arms And Rocker Arm Shaft Have Improved Lubrication{1102}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
New Camshaft Has Improved Wear Resistance{1210,1209}
1990/11/19
7S3161 Valve Lifter Has Three Different Designs{1209}
1991/10/14
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
New Valve Cover Seal Used {1107}
1998/05/25
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Special Instruction
Installation Of 2W3422 Flywheel Housing As The Service Replacement For 8N5013 Flywheel Housing{1157}
Installation Of 2W3422 Flywheel Housing As The Service Replacement For 8N5013 Flywheel Housing{1157}
Service Magazine
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
Information Release Memo
ENGINE OVERHAUL KITS FOR 3306 MACHINE ENGINES
ENGINE OVERHAUL KITS FOR 3306 MACHINE ENGINES
Service Magazine
Precious Metals Engine Rebuild Kits Are Available for 3306 Machine Engines {1000}
2012/07/02

Truck sale:

Caterpillar D25D
 
Caterpillar D25D
- Off Highway Trucks
FOLEY, INC.
Caterpillar D25D
 
Caterpillar D25D
- Off Highway Trucks
FOLEY, INC.
 
 
Caterpillar D25D, Construction
- Articulated Dump Trucks (ADTs)
BERGERAT MONNOYEUR S.A.S.
Belgium
 
65,000 
Caterpillar D25D, Construction
- Articulated Dump Trucks (ADTs)
HOLT CAT
 
 
CATERPILLAR D25D 1990
- ARTICULATED TRUCKS
YANCEY BROS CO
Paul Dabbs 770-819-5524, John Gorham 770-819-5154 Tom Tucker 770-819-5204, Luis Castr
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.